"Fossies" - the Fresh Open Source Software Archive

Member "chandler-1.0.3/external/m2crypto/M2Crypto-0.18.2/doc/ZServerSSL-HOWTO.html" (22 Jun 2003, 13840 Bytes) of archive /windows/misc/Chandler_src_1.0.3.tar.gz:



Author: Ng Pheng Siong
Id:ZServerSSL-HOWTO,v 1.1 2003/06/22 17:40:13 ngps Exp
Date: 2003-06-22


ZServerSSL adds to Zope's ZServer the following:

  • HTTPS server
  • WebDAV-source-over-HTTPS server

With the HTTPS server, ZServerSSL also provides WebDAV-over-HTTPS and XMLRPC-over-HTTPS access to Zope.

These instructions apply to both Un*x and Windows installations of Zope 2.6.1. To avoid cluttering the presentation, Windows pathnames are shown in Un*x fashion.


  1. Download M2Crypto 0.11, contained in the file m2crypto-0.11.zip.
  2. Unpack m2crypto-0.11.zip. This will create a directory m2crypto-0.11. Henceforth, we refer to this directory as $M2.
  3. Install M2Crypto per the instructions in $M2/INSTALL.

The ZServerSSL distribution is in $M2/demo/Zope. We shall refer to this directory as $ZSSL.


Below, we refer to your Zope top-level directory as $ZOPE.

  1. Copy $ZSSL/z2s.py into $ZOPE.

  2. Depending on your operating system, modify $ZOPE/start or $ZOPE/start.bat to invoke $ZOPE/z2s.py, instead of $ZOPE/z2.py. The files $ZSSL/starts and $ZSSL/starts.bat serve as examples.

  3. Copy $ZSSL/dh1024.pem into $ZOPE. This file contains Diffie-Hellman parameters for use by the SSL protocol.

  4. Copy $ZSSL/randpool.dat into $ZOPE. This file contains seed material for the OpenSSL PRNG. Alternatively, create $ZOPE/randpool.dat thusly:

    $ dd if=/dev/urandom of=randpool.dat bs=1024 count=1
  5. Copy $ZSSL/ca.pem to $ZOPE. This file contains an example Certification Authority (CA) certificate. For information on operating your own CA, see http://www.post1.com/home/ngps/m2/howto.ca.html or one of numerous similar documents available on the web.

  6. Copy $ZSSL/server.pem to $ZOPE. This file contains an RSA key pair and its X.509v3 certificate issued by the above CA. You may also create your own key/certificate bundle.

  7. Copy $ZSSL/ZServer/HTTPS_Server.py to $ZOPE/ZServer.

  8. Copy $ZSSL/ZServer/__init__.py to $ZOPE/ZServer. This overwrites the existing $ZOPE/ZServer/__init__.py. Alternatively, apply the following patch to $ZOPE/ZServer/__init__.py:

    --- __init__.py.org     Sat Jun 21 23:20:41 2003
    +++ __init__.py Tue Jan  7 23:30:53 2003
    @@ -84,6 +84,7 @@
     import asyncore
     from medusa import resolver, logger
     from HTTPServer import zhttp_server, zhttp_handler
    +from HTTPS_Server import zhttps_server, zhttps_handler
     from PCGIServer import PCGIServer
     from FCGIServer import FCGIServer
     from FTPServer import FTPServer
  9. Copy $ZSSL/ZServer/medusa/https_server.py to $ZOPE/ZServer/medusa.

  10. Stop Zope, if it is running.

  11. Start Zope with ZServerSSL thusly:

    ./starts -X -f 9021 -w 9080 -W 9081 -y 9443 -Y 9444

    This starts the following:

    • an FTP server on port 9021
    • a HTTP server on port 9080
    • a WebDAV-source server on port 9081
    • a HTTPS server on port 9443
    • a WebDAV-source-over-HTTPS server on port 9444


Below, we assume your Zope server is running on localhost.


This testing is done with Mozilla 1.1 on FreeBSD.

  1. With a browser, connect to https://localhost:9443/. Browse around. Check out your browser's HTTPS informational screens.
  2. Connect to https://localhost:9443/manage. Verify that you can access Zope's management functionality.


This testing is done with Cadaver 0.21.0 on FreeBSD.

$ cadaver https://localhost:9443/
WARNING: Untrusted server certificate presented:
Issued to: M2Crypto, SG
Issued by: M2Crypto, SG
Do you wish to accept the certificate? (y/n) y
dav:/> ls
Listing collection `/': succeeded.
Coll:   Channels                               0  Jun 19 00:04
Coll:   Control_Panel                          0  Jun  6 00:13
Coll:   Examples                               0  Jun  6 00:12
Coll:   catalog                                0  Jun 12 11:53
Coll:   ngps                                   0  Jun 16 15:34
Coll:   portal                                 0  Jun 21 15:21
Coll:   skunk                                  0  Jun 18 21:18
Coll:   temp_folder                            0  Jun 22 17:57
Coll:   zope                                   0  Jun 20 15:27
        acl_users                              0  Dec 30  1998
        browser_id_manager                     0  Jun  6 00:12
        default.css                         3037  Jun 21 16:38
        error_log                              0  Jun  6 00:12
        index_html                           313  Jun 12 13:36
        portal0                                0  Jun 21 15:21
        session_data_manager                   0  Jun  6 00:12
        standard_error_message              1365  Jan 21  2001
        standard_html_footer                  50  Jun 12 12:30
        standard_html_header                  80  Jan 21  2001
        standard_template.pt                 282  Jun  6 00:12
        zsyncer                                0  Jun 17 15:28
dav:/> quit
Connection to `localhost' closed.


This testing is done with Mozilla 1.1 on FreeBSD.

  1. Open the Mozilla Composer window.
  2. Click "File", "Open Web Location". A dialog box appears.
  3. Enter https://localhost:9444/index_html for the URL.
  4. Select "Open in new Composer window."
  5. Click "Open". A new Composer window will open with index_html loaded.

Python with M2Crypto

This testing is done with M2Crypto 0.11 and Python 2.2.2 on FreeBSD.


>>> from M2Crypto import Rand, SSL, m2urllib
>>> url = m2urllib.FancyURLopener()
>>> url.addheader('Connection', 'close')
>>> u = url.open('')
send: 'GET / HTTP/1.1\r\nHost:\r\nAccept-Encoding: identity\r\nUser-agent: Python-urllib/1.15\r\nConnection: close\r\n\r\n'
reply: 'HTTP/1.1 200 OK\r\n'
header: Server: ZServerSSL/0.11
header: Date: Sun, 22 Jun 2003 13:42:34 GMT
header: Connection: close
header: Content-Type: text/html
header: Etag: 
header: Content-Length: 535
>>> while 1:
...     data = u.read()
...     if not data: break
...     print data
<base href="" />
<title>Zope</title></head><body bgcolor="#FFFFFF">

<h1>NgPS Desktop Portal</h1>

&nbsp;&nbsp;So many hacks.<br>
&nbsp;&nbsp;So little time.<br>

<h2>Link Farm</h2>
<li><a href="http://localhost:8080/portal">Portal</a></li>
<li><a href="http://localhost/">Local Apache Home Page</a></li>

<hr><a href="http://www.zope.org/Credits" target="_top"><img src="" width="115" height="50" border="0" alt="Powered by Zope" /></a></body></html>
>>> u.close()


>>> from M2Crypto.m2xmlrpclib import Server, SSL_Transport
>>> zs = Server('', SSL_Transport())
>>> print zs.propertyMap()
[{'type': 'string', 'id': 'title', 'mode': 'w'}]


Well, it works! ;-)