"Fossies" - the Fresh Open Source Software Archive

Member "etc/ben.cfg" (13 May 2021, 53270 Bytes) of package /linux/privat/uncrustify-0.73.0.tar.gz:


As a special service "Fossies" has tried to format the requested source page into HTML format using (guessed) INI source code syntax highlighting (style: standard) with prefixed line numbers. Alternatively you can here view or download the uninterpreted source code file. See also the latest Fossies "Diffs" side-by-side code changes report for "ben.cfg": 0.72.0_vs_0.73.0.

    1 #
    2 # General options
    3 #
    4 
    5 # The type of line endings
    6 newlines                                  = lf       # auto/lf/crlf/cr
    7 
    8 # The original size of tabs in the input
    9 input_tab_size                            = 8        # number
   10 
   11 # The size of tabs in the output (only used if align_with_tabs=true)
   12 output_tab_size                           = 3        # number
   13 
   14 # The ASCII value of the string escape char, usually 92 (\) or 94 (^). (Pawn)
   15 string_escape_char                        = 92       # number
   16 
   17 # Alternate string escape char for Pawn. Only works right before the quote char.
   18 string_escape_char2                       = 0        # number
   19 
   20 # Replace tab characters found in string literals with the escape sequence \t instead.
   21 string_replace_tab_chars                  = false    # false/true
   22 
   23 # Allow interpreting '>=' and '>>=' as part of a template in 'void f(list<list<B>>=val);'.
   24 # If true (default), 'assert(x<0 && y>=3)' will be broken.
   25 # Improvements to template detection may make this option obsolete.
   26 tok_split_gte                             = false    # false/true
   27 
   28 # Override the default ' *INDENT-OFF*' in comments for disabling processing of part of the file.
   29 disable_processing_cmt                    = ""         # string
   30 
   31 # Override the default ' *INDENT-ON*' in comments for enabling processing of part of the file.
   32 enable_processing_cmt                     = ""         # string
   33 
   34 # Enable parsing of digraphs. Default=false
   35 enable_digraphs                           = false    # false/true
   36 
   37 # If the file contains bytes with values between 128 and 255, but is not UTF-8, then output as UTF-8
   38 utf8_byte                                 = false    # false/true
   39 
   40 # Force the output encoding to UTF-8
   41 utf8_force                                = false    # false/true
   42 
   43 #
   44 # Indenting
   45 #
   46 
   47 # The number of columns to indent per level.
   48 # Usually 2, 3, 4, or 8.
   49 indent_columns                            = 3        # number
   50 
   51 # The continuation indent. If non-zero, this overrides the indent of '(' and '=' continuation indents.
   52 # For FreeBSD, this is set to 4. Negative value is absolute and not increased for each ( level
   53 indent_continue                           = 0        # number
   54 
   55 # How to use tabs when indenting code
   56 # 0=spaces only
   57 # 1=indent with tabs to brace level, align with spaces
   58 # 2=indent and align with tabs, using spaces when not on a tabstop
   59 indent_with_tabs                          = 0        # number
   60 
   61 # Comments that are not a brace level are indented with tabs on a tabstop.
   62 # Requires indent_with_tabs=2. If false, will use spaces.
   63 indent_cmt_with_tabs                      = false    # false/true
   64 
   65 # Whether to indent strings broken by '\' so that they line up
   66 indent_align_string                       = true     # false/true
   67 
   68 # The number of spaces to indent multi-line XML strings.
   69 # Requires indent_align_string=True
   70 indent_xml_string                         = 0        # number
   71 
   72 # Spaces to indent '{' from level
   73 indent_brace                              = 0        # number
   74 
   75 # Whether braces are indented to the body level
   76 indent_braces                             = false    # false/true
   77 
   78 # Disabled indenting function braces if indent_braces is true
   79 indent_braces_no_func                     = false    # false/true
   80 
   81 # Disabled indenting class braces if indent_braces is true
   82 indent_braces_no_class                    = false    # false/true
   83 
   84 # Disabled indenting struct braces if indent_braces is true
   85 indent_braces_no_struct                   = false    # false/true
   86 
   87 # Indent based on the size of the brace parent, i.e. 'if' => 3 spaces, 'for' => 4 spaces, etc.
   88 indent_brace_parent                       = false    # false/true
   89 
   90 # Indent based on the paren open instead of the brace open in '({\n', default is to indent by brace.
   91 indent_paren_open_brace                   = false    # false/true
   92 
   93 # Whether the 'namespace' body is indented
   94 indent_namespace                          = false    # false/true
   95 
   96 # Only indent one namespace and no sub-namespaces.
   97 # Requires indent_namespace=true.
   98 indent_namespace_single_indent            = false    # false/true
   99 
  100 # The number of spaces to indent a namespace block
  101 indent_namespace_level                    = 0        # number
  102 
  103 # If the body of the namespace is longer than this number, it won't be indented.
  104 # Requires indent_namespace=true. Default=0 (no limit)
  105 indent_namespace_limit                    = 0        # number
  106 
  107 # Whether the 'extern "C"' body is indented
  108 indent_extern                             = false    # false/true
  109 
  110 # Whether the 'class' body is indented
  111 indent_class                              = true     # false/true
  112 
  113 # Whether to indent the stuff after a leading base class colon
  114 indent_class_colon                        = true     # false/true
  115 
  116 # Indent based on a class colon instead of the stuff after the colon.
  117 # Requires indent_class_colon=true. Default=false
  118 indent_class_on_colon                     = false    # false/true
  119 
  120 # Whether to indent the stuff after a leading class initializer colon
  121 indent_constr_colon                       = false    # false/true
  122 
  123 # Virtual indent from the ':' for member initializers. Default is 2
  124 indent_ctor_init_leading                  = 2        # number
  125 
  126 # Additional indenting for constructor initializer list
  127 indent_ctor_init                          = 0        # number
  128 
  129 # False=treat 'else\nif' as 'else if' for indenting purposes
  130 # True=indent the 'if' one level
  131 indent_else_if                            = false    # false/true
  132 
  133 # Amount to indent variable declarations after a open brace. neg=relative, pos=absolute
  134 indent_var_def_blk                        = 0        # number
  135 
  136 # Indent continued variable declarations instead of aligning.
  137 indent_var_def_cont                       = false    # false/true
  138 
  139 # Indent continued shift expressions ('<<' and '>>') instead of aligning.
  140 # Turn align_left_shift off when enabling this.
  141 indent_shift                              = false    # false/true
  142 
  143 # True:  force indentation of function definition to start in column 1
  144 # False: use the default behavior
  145 indent_func_def_force_col1                = false    # false/true
  146 
  147 # True:  indent continued function call parameters one indent level
  148 # False: align parameters under the open paren
  149 indent_func_call_param                    = false    # false/true
  150 
  151 # Same as indent_func_call_param, but for function defs
  152 indent_func_def_param                     = false    # false/true
  153 
  154 # Same as indent_func_call_param, but for function protos
  155 indent_func_proto_param                   = false    # false/true
  156 
  157 # Same as indent_func_call_param, but for class declarations
  158 indent_func_class_param                   = false    # false/true
  159 
  160 # Same as indent_func_call_param, but for class variable constructors
  161 indent_func_ctor_var_param                = false    # false/true
  162 
  163 # Same as indent_func_call_param, but for templates
  164 indent_template_param                     = false    # false/true
  165 
  166 # Double the indent for indent_func_xxx_param options
  167 indent_func_param_double                  = false    # false/true
  168 
  169 # Indentation column for standalone 'const' function decl/proto qualifier
  170 indent_func_const                         = 0        # number
  171 
  172 # Indentation column for standalone 'throw' function decl/proto qualifier
  173 indent_func_throw                         = 0        # number
  174 
  175 # The number of spaces to indent a continued '->' or '.'
  176 # Usually set to 0, 1, or indent_columns.
  177 indent_member                             = 3        # number
  178 
  179 # Spaces to indent single line ('//') comments on lines before code
  180 indent_sing_line_comments                 = 0        # number
  181 
  182 # If set, will indent trailing single line ('//') comments relative
  183 # to the code instead of trying to keep the same absolute column
  184 indent_relative_single_line_comments      = false    # false/true
  185 
  186 # Spaces to indent 'case' from 'switch'
  187 # Usually 0 or indent_columns.
  188 indent_switch_case                        = 0        # number
  189 
  190 # Spaces to shift the 'case' line, without affecting any other lines
  191 # Usually 0.
  192 indent_case_shift                         = 0        # number
  193 
  194 # Spaces to indent '{' from 'case'.
  195 # By default, the brace will appear under the 'c' in case.
  196 # Usually set to 0 or indent_columns.
  197 indent_case_brace                         = 3        # number
  198 
  199 # Whether to indent comments found in first column
  200 indent_col1_comment                       = false    # false/true
  201 
  202 # How to indent goto labels
  203 #  >0 : absolute column where 1 is the leftmost column
  204 #  <=0 : subtract from brace indent
  205 indent_label                              = 1        # number
  206 
  207 # Same as indent_label, but for access specifiers that are followed by a colon
  208 indent_access_spec                        = 1        # number
  209 
  210 # Indent the code after an access specifier by one level.
  211 # If set, this option forces 'indent_access_spec=0'
  212 indent_access_spec_body                   = false    # false/true
  213 
  214 # If an open paren is followed by a newline, indent the next line so that it lines up after the open paren (not recommended)
  215 indent_paren_nl                           = false    # false/true
  216 
  217 # Controls the indent of a close paren after a newline.
  218 # 0: Indent to body level
  219 # 1: Align under the open paren
  220 # 2: Indent to the brace level
  221 indent_paren_close                        = 0        # number
  222 
  223 # Controls the indent of a comma when inside a paren.If TRUE, aligns under the open paren
  224 indent_comma_paren                        = false    # false/true
  225 
  226 # Controls the indent of a BOOL operator when inside a paren.If TRUE, aligns under the open paren
  227 indent_bool_paren                         = false    # false/true
  228 
  229 # If 'indent_bool_paren' is true, controls the indent of the first expression. If TRUE, aligns the first expression to the following ones
  230 indent_first_bool_expr                    = false    # false/true
  231 
  232 # If an open square is followed by a newline, indent the next line so that it lines up after the open square (not recommended)
  233 indent_square_nl                          = false    # false/true
  234 
  235 # Don't change the relative indent of ESQL/C 'EXEC SQL' bodies
  236 indent_preserve_sql                       = false    # false/true
  237 
  238 # Align continued statements at the '='. Default=True
  239 # If FALSE or the '=' is followed by a newline, the next line is indent one tab.
  240 indent_align_assign                       = true     # false/true
  241 
  242 # Indent OC blocks at brace level instead of usual rules.
  243 indent_oc_block                           = false    # false/true
  244 
  245 # Indent OC blocks in a message relative to the parameter name.
  246 # 0=use indent_oc_block rules, 1+=spaces to indent
  247 indent_oc_block_msg                       = 0        # number
  248 
  249 # Minimum indent for subsequent parameters
  250 indent_oc_msg_colon                       = 0        # number
  251 
  252 # If true, prioritize aligning with initial colon (and stripping spaces from lines, if necessary).
  253 # Default is true.
  254 indent_oc_msg_prioritize_first_colon      = true     # false/true
  255 
  256 # If indent_oc_block_msg and this option are on, blocks will be indented the way that Xcode does by default (from keyword if the parameter is on its own line; otherwise, from the previous indentation level).
  257 indent_oc_block_msg_xcode_style           = false    # false/true
  258 
  259 # If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is relative to a msg keyword.
  260 indent_oc_block_msg_from_keyword          = false    # false/true
  261 
  262 # If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is relative to a msg colon.
  263 indent_oc_block_msg_from_colon            = false    # false/true
  264 
  265 # If indent_oc_block_msg and this option are on, blocks will be indented from where the block caret is.
  266 indent_oc_block_msg_from_caret            = false    # false/true
  267 
  268 # If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is.
  269 indent_oc_block_msg_from_brace            = false    # false/true
  270 
  271 # When identing after virtual brace open and newline add further spaces to reach this min. indent.
  272 indent_min_vbrace_open                    = 0        # number
  273 
  274 # TRUE: When identing after virtual brace open and newline add further spaces after regular indent to reach next tabstop.
  275 indent_vbrace_open_on_tabstop             = false    # false/true
  276 
  277 #
  278 # Spacing options
  279 #
  280 
  281 # Add or remove space around arithmetic operator '+', '-', '/', '*', etc
  282 # also '>>>' '<<' '>>' '%' '|'
  283 sp_arith                                  = force    # ignore/add/remove/force
  284 
  285 # Add or remove space around assignment operator '=', '+=', etc
  286 sp_assign                                 = force    # ignore/add/remove/force
  287 
  288 # Add or remove space around preprocessor '##' concatenation operator. Default=Add
  289 sp_pp_concat                              = add      # ignore/add/remove/force
  290 
  291 # Add or remove space after preprocessor '#' stringify operator. Also affects the '#@' charizing operator.
  292 sp_pp_stringify                           = add      # ignore/add/remove/force
  293 
  294 # Add or remove space around boolean operators '&&' and '||'
  295 sp_bool                                   = force    # ignore/add/remove/force
  296 
  297 # Add or remove space around compare operator '<', '>', '==', etc
  298 sp_compare                                = force    # ignore/add/remove/force
  299 
  300 # Add or remove space inside '(' and ')'
  301 sp_inside_paren                           = remove   # ignore/add/remove/force
  302 
  303 # Add or remove space between nested parens: '((' vs ') )'
  304 sp_paren_paren                            = remove   # ignore/add/remove/force
  305 
  306 # Whether to balance spaces inside nested parens
  307 sp_balance_nested_parens                  = false    # false/true
  308 
  309 # Add or remove space before pointer star '*'
  310 sp_before_ptr_star                        = force    # ignore/add/remove/force
  311 
  312 # Add or remove space between pointer stars '*'
  313 sp_between_ptr_star                       = remove   # ignore/add/remove/force
  314 
  315 # Add or remove space after pointer star '*', if followed by a word.
  316 sp_after_ptr_star                         = remove   # ignore/add/remove/force
  317 
  318 # Add or remove space before a reference sign '&'
  319 sp_before_byref                           = remove   # ignore/add/remove/force
  320 
  321 # Add or remove space after reference sign '&', if followed by a word.
  322 sp_after_byref                            = force    # ignore/add/remove/force
  323 
  324 # Add or remove space between type and word. Default=Force
  325 sp_after_type                             = force    # ignore/add/remove/force
  326 
  327 # Add or remove space before '<>'
  328 sp_before_angle                           = remove   # ignore/add/remove/force
  329 
  330 # Add or remove space inside '<' and '>'
  331 sp_inside_angle                           = remove   # ignore/add/remove/force
  332 
  333 # Add or remove space after '<>'
  334 sp_after_angle                            = force    # ignore/add/remove/force
  335 
  336 # Add or remove space between '>' and '>' in '>>' (template stuff C++/C# only). Default=Add
  337 sp_angle_shift                            = add      # ignore/add/remove/force
  338 
  339 # Permit removal of the space between '>>' in 'foo<bar<int> >' (C++11 only). Default=False
  340 # sp_angle_shift cannot remove the space without this option.
  341 sp_permit_cpp11_shift                     = false    # false/true
  342 
  343 # Add or remove space before '(' of 'if', 'for', 'switch', 'while', etc.
  344 sp_before_sparen                          = force    # ignore/add/remove/force
  345 
  346 # Add or remove space inside if-condition '(' and ')'
  347 sp_inside_sparen                          = remove   # ignore/add/remove/force
  348 
  349 # Add or remove space after ')' of 'if', 'for', 'switch', and 'while', etc.
  350 sp_after_sparen                           = force    # ignore/add/remove/force
  351 
  352 # Add or remove space between ')' and '{' of 'if', 'for', 'switch', and 'while', etc.
  353 sp_sparen_brace                           = add      # ignore/add/remove/force
  354 
  355 # Add or remove space before ';'. Default=Remove
  356 sp_before_semi                            = remove   # ignore/add/remove/force
  357 
  358 # Add or remove space before a semicolon of an empty part of a for statement.
  359 sp_before_semi_for_empty                  = force    # ignore/add/remove/force
  360 
  361 # Add or remove space after ';', except when followed by a comment. Default=Add
  362 sp_after_semi                             = add      # ignore/add/remove/force
  363 
  364 # Add or remove space after ';' in non-empty 'for' statements. Default=Force
  365 sp_after_semi_for                         = force    # ignore/add/remove/force
  366 
  367 # Add or remove space inside a non-empty '[' and ']'
  368 sp_inside_square                          = remove   # ignore/add/remove/force
  369 
  370 # Add or remove space after ','
  371 sp_after_comma                            = force    # ignore/add/remove/force
  372 
  373 # Add or remove space before ','
  374 sp_before_comma                           = remove   # ignore/add/remove/force
  375 
  376 # Add or remove space between an open paren and comma: '(,' vs '( ,'
  377 sp_paren_comma                            = force    # ignore/add/remove/force
  378 
  379 # Add or remove space before case ':'. Default=Remove
  380 sp_before_case_colon                      = remove   # ignore/add/remove/force
  381 
  382 # Add or remove space after C/D cast, i.e. 'cast(int)a' vs 'cast(int) a' or '(int)a' vs '(int) a'
  383 sp_after_cast                             = remove   # ignore/add/remove/force
  384 
  385 # Add or remove space between 'sizeof' and '('
  386 sp_sizeof_paren                           = remove   # ignore/add/remove/force
  387 
  388 # Add or remove space inside enum '{' and '}'
  389 sp_inside_braces_enum                     = force    # ignore/add/remove/force
  390 
  391 # Add or remove space inside struct/union '{' and '}'
  392 sp_inside_braces_struct                   = force    # ignore/add/remove/force
  393 
  394 # Add or remove space inside '{' and '}'
  395 sp_inside_braces                          = force    # ignore/add/remove/force
  396 
  397 # Add or remove space between return type and function name
  398 # A minimum of 1 is forced except for pointer return types.
  399 sp_type_func                              = force    # ignore/add/remove/force
  400 
  401 # Add or remove space between function name and '(' on function declaration
  402 sp_func_proto_paren                       = remove   # ignore/add/remove/force
  403 
  404 # Add or remove space between function name and '(' on function definition
  405 sp_func_def_paren                         = remove   # ignore/add/remove/force
  406 
  407 # Add or remove space inside function '(' and ')'
  408 sp_inside_fparen                          = remove   # ignore/add/remove/force
  409 
  410 # Add or remove space between ')' and '{' of function
  411 sp_fparen_brace                           = add      # ignore/add/remove/force
  412 
  413 # Add or remove space between function name and '(' on function calls
  414 sp_func_call_paren                        = remove   # ignore/add/remove/force
  415 
  416 # Add or remove space between a constructor/destructor and the open paren
  417 sp_func_class_paren                       = remove   # ignore/add/remove/force
  418 
  419 # Add or remove space between 'return' and '('
  420 sp_return_paren                           = remove   # ignore/add/remove/force
  421 
  422 # Add or remove space between '}' and the name of a typedef on the same line
  423 sp_brace_typedef                          = force    # ignore/add/remove/force
  424 
  425 # Add or remove space between type and open brace of an unnamed temporary
  426 # direct-list-initialization.
  427 sp_type_brace_init_lst                    = add      # ignore/add/remove/force
  428 
  429 # Add or remove space between a variable and '{' for a namespace
  430 sp_word_brace_ns                          = add      # ignore/add/remove/force
  431 
  432 # Add or remove space before the '::' operator
  433 sp_before_dc                              = remove   # ignore/add/remove/force
  434 
  435 # Add or remove space after the '::' operator
  436 sp_after_dc                               = remove   # ignore/add/remove/force
  437 
  438 # Add or remove space after the '!' (not) operator. Default=Remove
  439 sp_not                                    = remove   # ignore/add/remove/force
  440 
  441 # Add or remove space after the '~' (invert) operator. Default=Remove
  442 sp_inv                                    = remove   # ignore/add/remove/force
  443 
  444 # Add or remove space after the '&' (address-of) operator. Default=Remove
  445 # This does not affect the spacing after a '&' that is part of a type.
  446 sp_addr                                   = remove   # ignore/add/remove/force
  447 
  448 # Add or remove space around the '.' or '->' operators. Default=Remove
  449 sp_member                                 = remove   # ignore/add/remove/force
  450 
  451 # Add or remove space after the '*' (dereference) operator. Default=Remove
  452 # This does not affect the spacing after a '*' that is part of a type.
  453 sp_deref                                  = remove   # ignore/add/remove/force
  454 
  455 # Add or remove space after '+' or '-', as in 'x = -5' or 'y = +7'. Default=Remove
  456 sp_sign                                   = remove   # ignore/add/remove/force
  457 
  458 # Add or remove space before or after '++' and '--', as in '(--x)' or 'y++;'. Default=Remove
  459 sp_incdec                                 = remove   # ignore/add/remove/force
  460 
  461 # Add or remove space before a backslash-newline at the end of a line. Default=Add
  462 sp_before_nl_cont                         = add      # ignore/add/remove/force
  463 
  464 # Fix the spacing between 'case' and the label. Only 'ignore' and 'force' make sense here.
  465 sp_case_label                             = remove   # ignore/add/remove/force
  466 
  467 # TRUE: If space is added with sp_cmt_cpp_start, do it after doxygen sequences like '///', '///<', '//!' and '//!<'.
  468 sp_cmt_cpp_doxygen                        = false    # false/true
  469 
  470 # TRUE: If space is added with sp_cmt_cpp_start, do it after Qt translator or meta-data comments like '//:', '//=', and '//~'.
  471 sp_cmt_cpp_qttr                           = false    # false/true
  472 
  473 # Number of spaces before a trailing or embedded comment
  474 sp_num_before_tr_emb_cmt                  = 0        # number
  475 
  476 #
  477 # Code alignment (not left column spaces/tabs)
  478 #
  479 
  480 # Whether to keep non-indenting tabs
  481 align_keep_tabs                           = false    # false/true
  482 
  483 # Whether to use tabs for aligning
  484 align_with_tabs                           = false    # false/true
  485 
  486 # Whether to bump out to the next tab when aligning
  487 align_on_tabstop                          = false    # false/true
  488 
  489 # Whether to right-align numbers
  490 align_number_right                         = true     # false/true
  491 
  492 # Whether to keep whitespace not required for alignment.
  493 align_keep_extra_space                    = false    # false/true
  494 
  495 # Align variable definitions in prototypes and functions
  496 align_func_params                         = true     # false/true
  497 
  498 # Align parameters in single-line functions that have the same name.
  499 # The function names must already be aligned with each other.
  500 align_same_func_call_params               = false    # false/true
  501 
  502 # The span for aligning parameters in single line functions with the same name (0=don't align).
  503 align_same_func_call_params_span          = 0        # unsigned number
  504 
  505 # The thresh for aligning function call parameters (0=no limit).
  506 align_same_func_call_params_thresh        = 0        # unsigned number
  507 
  508 # The span for aligning variable definitions (0=don't align)
  509 align_var_def_span                        = 1        # number
  510 
  511 # How to align the star in variable definitions.
  512 #  0=Part of the type     'void *   foo;'
  513 #  1=Part of the variable 'void     *foo;'
  514 #  2=Dangling             'void    *foo;'
  515 align_var_def_star_style                  = 1        # number
  516 
  517 # How to align the '&' in variable definitions.
  518 #  0=Part of the type
  519 #  1=Part of the variable
  520 #  2=Dangling
  521 align_var_def_amp_style                   = 0        # number
  522 
  523 # The threshold for aligning variable definitions (0=no limit)
  524 align_var_def_thresh                      = 16       # number
  525 
  526 # The gap for aligning variable definitions
  527 align_var_def_gap                         = 0        # number
  528 
  529 # Whether to align the colon in struct bit fields
  530 align_var_def_colon                       = true     # false/true
  531 
  532 # Whether to align any attribute after the variable name
  533 align_var_def_attribute                   = false    # false/true
  534 
  535 # Whether to align inline struct/enum/union variable definitions
  536 align_var_def_inline                      = true     # false/true
  537 
  538 # The span for aligning on '=' in assignments (0=don't align)
  539 align_assign_span                         = 1        # number
  540 
  541 # The threshold for aligning on '=' in assignments (0=no limit)
  542 align_assign_thresh                       = 12       # number
  543 
  544 # The span for aligning on '=' in enums (0=don't align)
  545 align_enum_equ_span                       = 16       # number
  546 
  547 # The threshold for aligning on '=' in enums (0=no limit)
  548 align_enum_equ_thresh                     = 0        # number
  549 
  550 # The span for aligning struct/union (0=don't align)
  551 align_var_struct_span                     = 99       # number
  552 
  553 # The threshold for aligning struct/union member definitions (0=no limit)
  554 align_var_struct_thresh                   = 0        # number
  555 
  556 # The gap for aligning struct/union member definitions
  557 align_var_struct_gap                      = 0        # number
  558 
  559 # The span for aligning struct initializer values (0=don't align)
  560 align_struct_init_span                    = 3        # number
  561 
  562 # The minimum space between the type and the synonym of a typedef
  563 align_typedef_gap                         = 3        # number
  564 
  565 # The span for aligning single-line typedefs (0=don't align)
  566 align_typedef_span                        = 5        # number
  567 
  568 # How to align typedef'd functions with other typedefs
  569 # 0: Don't mix them at all
  570 # 1: align the open paren with the types
  571 # 2: align the function type name with the other type names
  572 align_typedef_func                        = 0        # number
  573 
  574 # Controls the positioning of the '*' in typedefs. Just try it.
  575 # 0: Align on typedef type, ignore '*'
  576 # 1: The '*' is part of type name: typedef int  *pint;
  577 # 2: The '*' is part of the type, but dangling: typedef int *pint;
  578 align_typedef_star_style                  = 0        # number
  579 
  580 # Controls the positioning of the '&' in typedefs. Just try it.
  581 # 0: Align on typedef type, ignore '&'
  582 # 1: The '&' is part of type name: typedef int  &pint;
  583 # 2: The '&' is part of the type, but dangling: typedef int &pint;
  584 align_typedef_amp_style                   = 0        # number
  585 
  586 # The span for aligning comments that end lines (0=don't align)
  587 align_right_cmt_span                      = 3        # number
  588 
  589 # If aligning comments, mix with comments after '}' and #endif with less than 3 spaces before the comment
  590 align_right_cmt_mix                       = false    # false/true
  591 
  592 # If a trailing comment is more than this number of columns away from the text it follows,
  593 # it will qualify for being aligned. This has to be > 0 to do anything.
  594 align_right_cmt_gap                       = 0        # number
  595 
  596 # Align trailing comment at or beyond column N; 'pulls in' comments as a bonus side effect (0=ignore)
  597 align_right_cmt_at_col                    = 0        # number
  598 
  599 # The span for aligning function prototypes (0=don't align)
  600 align_func_proto_span                     = 0        # number
  601 
  602 # Minimum gap between the return type and the function name.
  603 align_func_proto_gap                      = 0        # number
  604 
  605 # Align function protos on the 'operator' keyword instead of what follows
  606 align_on_operator                         = false    # false/true
  607 
  608 # Whether to mix aligning prototype and variable declarations.
  609 # If true, align_var_def_XXX options are used instead of align_func_proto_XXX options.
  610 align_mix_var_proto                       = false    # false/true
  611 
  612 # Align single-line functions with function prototypes, uses align_func_proto_span
  613 align_single_line_func                    = false    # false/true
  614 
  615 # Aligning the open brace of single-line functions.
  616 # Requires align_single_line_func=true, uses align_func_proto_span
  617 align_single_line_brace                   = false    # false/true
  618 
  619 # Gap for align_single_line_brace.
  620 align_single_line_brace_gap               = 0        # number
  621 
  622 # The span for aligning ObjC msg spec (0=don't align)
  623 align_oc_msg_spec_span                    = 0        # number
  624 
  625 # Whether to align macros wrapped with a backslash and a newline.
  626 # This will not work right if the macro contains a multi-line comment.
  627 align_nl_cont                             = true     # false/true
  628 
  629 # # Align macro functions and variables together
  630 align_pp_define_together                  = false    # false/true
  631 
  632 # The minimum space between label and value of a preprocessor define
  633 align_pp_define_gap                       = 4        # number
  634 
  635 # The span for aligning on '#define' bodies (0=don't align, other=number of lines including comments between blocks)
  636 align_pp_define_span                      = 3        # number
  637 
  638 # Align lines that start with '<<' with previous '<<'. Default=true
  639 align_left_shift                          = true     # false/true
  640 
  641 # Align text after asm volatile () colons.
  642 align_asm_colon                           = true     # false/true
  643 
  644 # Span for aligning parameters in an Obj-C message call on the ':' (0=don't align)
  645 align_oc_msg_colon_span                   = 0        # number
  646 
  647 # If true, always align with the first parameter, even if it is too short.
  648 align_oc_msg_colon_first                  = false    # false/true
  649 
  650 # Aligning parameters in an Obj-C '+' or '-' declaration on the ':'
  651 align_oc_decl_colon                       = false    # false/true
  652 
  653 #
  654 # Newline adding and removing options
  655 #
  656 
  657 # Whether to collapse empty blocks between '{' and '}'
  658 nl_collapse_empty_body                    = false    # false/true
  659 
  660 # Don't split one-line braced assignments - 'foo_t f = { 1, 2 };'
  661 nl_assign_leave_one_liners                = true     # false/true
  662 
  663 # Don't split one-line braced statements inside a class xx { } body
  664 nl_class_leave_one_liners                 = true     # false/true
  665 
  666 # Don't split one-line enums: 'enum foo { BAR = 15 };'
  667 nl_enum_leave_one_liners                  = false    # false/true
  668 
  669 # Don't split one-line get or set functions
  670 nl_getset_leave_one_liners                = false    # false/true
  671 
  672 # Don't split one-line function definitions - 'int foo() { return 0; }'
  673 nl_func_leave_one_liners                  = false    # false/true
  674 
  675 # Don't split one-line C++11 lambdas - '[]() { return 0; }'
  676 nl_cpp_lambda_leave_one_liners            = false    # false/true
  677 
  678 # Don't split one-line if/else statements - 'if(a) b++;'
  679 nl_if_leave_one_liners                    = false    # false/true
  680 
  681 # Don't split one-line while statements - 'while(a) b++;'
  682 nl_while_leave_one_liners                 = false    # false/true
  683 
  684 # Don't split one-line OC messages
  685 nl_oc_msg_leave_one_liner                 = false    # false/true
  686 
  687 # Add or remove newlines at the start of the file
  688 nl_start_of_file                          = remove   # ignore/add/remove/force
  689 
  690 # The number of newlines at the start of the file (only used if nl_start_of_file is 'add' or 'force'
  691 nl_start_of_file_min                      = 0        # number
  692 
  693 # Add or remove newline at the end of the file
  694 nl_end_of_file                            = force    # ignore/add/remove/force
  695 
  696 # The number of newlines at the end of the file (only used if nl_end_of_file is 'add' or 'force')
  697 nl_end_of_file_min                        = 1        # number
  698 
  699 # Add or remove newline between '=' and '{'
  700 nl_assign_brace                           = add      # ignore/add/remove/force
  701 
  702 # The number of blank lines after a block of variable definitions at the top of a function body
  703 # 0 = No change (default)
  704 nl_func_var_def_blk                       = 1        # number
  705 
  706 # The number of newlines before a block of typedefs
  707 # 0 = No change (default)
  708 nl_typedef_blk_start                      = 0        # number
  709 
  710 # The number of newlines after a block of typedefs
  711 # 0 = No change (default)
  712 nl_typedef_blk_end                        = 0        # number
  713 
  714 # The maximum consecutive newlines within a block of typedefs
  715 # 0 = No change (default)
  716 nl_typedef_blk_in                         = 0        # number
  717 
  718 # The number of newlines before a block of variable definitions not at the top of a function body
  719 # 0 = No change (default)
  720 nl_var_def_blk_start                      = 0        # number
  721 
  722 # The number of newlines after a block of variable definitions not at the top of a function body
  723 # 0 = No change (default)
  724 nl_var_def_blk_end                        = 0        # number
  725 
  726 # The maximum consecutive newlines within a block of variable definitions
  727 # 0 = No change (default)
  728 nl_var_def_blk_in                         = 0        # number
  729 
  730 # Add or remove newline between a function call's ')' and '{', as in:
  731 # list_for_each(item, &list) { }
  732 nl_fcall_brace                            = add      # ignore/add/remove/force
  733 
  734 # Add or remove newline between 'enum' and '{'
  735 nl_enum_brace                             = force    # ignore/add/remove/force
  736 
  737 # Add or remove newline between 'struct and '{'
  738 nl_struct_brace                           = force    # ignore/add/remove/force
  739 
  740 # Add or remove newline between 'union' and '{'
  741 nl_union_brace                            = force    # ignore/add/remove/force
  742 
  743 # Add or remove newline between 'if' and '{'
  744 nl_if_brace                               = add      # ignore/add/remove/force
  745 
  746 # Add or remove newline between '}' and 'else'
  747 nl_brace_else                             = add      # ignore/add/remove/force
  748 
  749 # Add or remove newline between 'else' and '{'
  750 nl_else_brace                             = add      # ignore/add/remove/force
  751 
  752 # Add or remove newline between get/set and '{'
  753 nl_getset_brace                           = force    # ignore/add/remove/force
  754 
  755 # Add or remove newline between 'for' and '{'
  756 nl_for_brace                              = add      # ignore/add/remove/force
  757 
  758 # Add or remove newline between 'while' and '{'
  759 nl_while_brace                            = add      # ignore/add/remove/force
  760 
  761 # Add or remove newline between 'do' and '{'
  762 nl_do_brace                               = add      # ignore/add/remove/force
  763 
  764 # Add or remove newline between '}' and 'while' of 'do' statement
  765 nl_brace_while                            = remove   # ignore/add/remove/force
  766 
  767 # Add or remove newline between 'switch' and '{'
  768 nl_switch_brace                           = add      # ignore/add/remove/force
  769 
  770 # Add a newline between ')' and '{' if the ')' is on a different line than the if/for/etc.
  771 # Overrides nl_for_brace, nl_if_brace, nl_switch_brace, nl_while_switch, and nl_catch_brace.
  772 nl_multi_line_cond                        = false    # false/true
  773 
  774 # Force a newline in a define after the macro name for multi-line defines.
  775 nl_multi_line_define                      = true     # false/true
  776 
  777 # Whether to put a newline before 'case' statement
  778 nl_before_case                            = true     # false/true
  779 
  780 # Whether to put a newline after 'case' statement
  781 nl_after_case                             = true     # false/true
  782 
  783 # Add or remove newline between a function name and the opening '('
  784 nl_func_paren                             = remove   # ignore/add/remove/force
  785 
  786 # Whether to put each OC message parameter on a separate line
  787 # See nl_oc_msg_leave_one_liner
  788 nl_oc_msg_args                            = false    # false/true
  789 
  790 # Add or remove newline between function signature and '{'
  791 nl_fdef_brace                             = add      # ignore/add/remove/force
  792 
  793 # Whether to put a newline after semicolons, except in 'for' statements
  794 nl_after_semicolon                        = true     # false/true
  795 
  796 # Whether to put a newline after brace open.
  797 # This also adds a newline before the matching brace close.
  798 nl_after_brace_open                       = true     # false/true
  799 
  800 # If nl_after_brace_open and nl_after_brace_open_cmt are true, a newline is
  801 # placed between the open brace and a trailing single-line comment.
  802 nl_after_brace_open_cmt                   = false    # false/true
  803 
  804 # Whether to put a newline after a virtual brace open with a non-empty body.
  805 # These occur in un-braced if/while/do/for statement bodies.
  806 nl_after_vbrace_open                      = false    # false/true
  807 
  808 # Whether to put a newline after a virtual brace open with an empty body.
  809 # These occur in un-braced if/while/do/for statement bodies.
  810 nl_after_vbrace_open_empty                = false    # false/true
  811 
  812 # Whether to put a newline after a brace close.
  813 # Does not apply if followed by a necessary ';'.
  814 nl_after_brace_close                      = true     # false/true
  815 
  816 # Whether to put a newline after a virtual brace close.
  817 # Would add a newline before return in: 'if (foo) a++; return;'
  818 nl_after_vbrace_close                     = false    # false/true
  819 
  820 # Whether to alter newlines in '#define' macros
  821 nl_define_macro                           = false    # false/true
  822 
  823 # Whether to not put blanks after '#ifxx', '#elxx', or before '#endif'. Does not affect the whole-file #ifdef.
  824 nl_squeeze_ifdef                          = true     # false/true
  825 
  826 # Whether to double-space commented-entries in struct/enum
  827 nl_ds_struct_enum_cmt                     = false    # false/true
  828 
  829 # Whether to double-space before the close brace of a struct/union/enum
  830 # (lower priority than 'eat_blanks_before_close_brace')
  831 nl_ds_struct_enum_close_brace             = false    # false/true
  832 
  833 # Change simple unbraced if statements into a one-liner
  834 # 'if(b)\n i++;' => 'if(b) i++;'
  835 nl_create_if_one_liner                    = false    # false/true
  836 
  837 # Change simple unbraced for statements into a one-liner
  838 # 'for (i=0;i<5;i++)\n foo(i);' => 'for (i=0;i<5;i++) foo(i);'
  839 nl_create_for_one_liner                   = false    # false/true
  840 
  841 # Change simple unbraced while statements into a one-liner
  842 # 'while (i<5)\n foo(i++);' => 'while (i<5) foo(i++);'
  843 nl_create_while_one_liner                 = false    # false/true
  844 
  845 #
  846 # Positioning options
  847 #
  848 
  849 # The position of boolean operators in wrapped expressions
  850 pos_bool                                  = trail    # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
  851 
  852 #
  853 # Line Splitting options
  854 #
  855 
  856 # Try to limit code width to N number of columns
  857 code_width                                = 0        # number
  858 
  859 # Whether to fully split long 'for' statements at semi-colons
  860 ls_for_split_full                         = false    # false/true
  861 
  862 # Whether to fully split long function protos/calls at commas
  863 ls_func_split_full                        = false    # false/true
  864 
  865 # Whether to split lines as close to code_width as possible and ignore some groupings
  866 ls_code_width                             = false    # false/true
  867 
  868 #
  869 # Blank line options
  870 #
  871 
  872 # The maximum consecutive newlines
  873 nl_max                                    = 4        # number
  874 
  875 # The number of newlines after a function prototype, if followed by another function prototype
  876 nl_after_func_proto                       = 0        # number
  877 
  878 # The number of newlines after a function prototype, if not followed by another function prototype
  879 nl_after_func_proto_group                 = 2        # number
  880 
  881 # The number of newlines after '}' of a multi-line function body
  882 nl_after_func_body                        = 3        # number
  883 
  884 # The number of newlines after '}' of a multi-line function body in a class declaration
  885 nl_after_func_body_class                  = 2        # number
  886 
  887 # The number of newlines after '}' of a single line function body
  888 nl_after_func_body_one_liner              = 0        # number
  889 
  890 # The minimum number of newlines before a multi-line comment.
  891 # Doesn't apply if after a brace open or another multi-line comment.
  892 nl_before_block_comment                   = 2        # number
  893 
  894 # The minimum number of newlines before a single-line C comment.
  895 # Doesn't apply if after a brace open or other single-line C comments.
  896 nl_before_c_comment                       = 0        # number
  897 
  898 # The minimum number of newlines before a CPP comment.
  899 # Doesn't apply if after a brace open or other CPP comments.
  900 nl_before_cpp_comment                     = 0        # number
  901 
  902 # Whether to force a newline after a multi-line comment.
  903 nl_after_multiline_comment                = false    # false/true
  904 
  905 # Whether to force a newline after a label's colon.
  906 nl_after_label_colon                      = false    # false/true
  907 
  908 # The number of newlines after '}' or ';' of a struct/enum/union definition
  909 nl_after_struct                           = 0        # number
  910 
  911 # The number of newlines after '}' or ';' of a class definition
  912 nl_after_class                            = 0        # number
  913 
  914 # The number of newlines after '}' of a namespace
  915 nl_after_namespace                        = 0        # number
  916 
  917 # The number of newlines before a 'private:', 'public:', 'protected:', 'signals:', or 'slots:' label.
  918 # Will not change the newline count if after a brace open.
  919 # 0 = No change.
  920 nl_before_access_spec                     = 0        # number
  921 
  922 # The number of newlines after a 'private:', 'public:', 'protected:', 'signals:', or 'slots:' label.
  923 # 0 = No change.
  924 nl_after_access_spec                      = 0        # number
  925 
  926 # The number of newlines between a function def and the function comment.
  927 # 0 = No change.
  928 nl_comment_func_def                       = 1        # number
  929 
  930 # The number of newlines after a try-catch-finally block that isn't followed by a brace close.
  931 # 0 = No change.
  932 nl_after_try_catch_finally                = 0        # number
  933 
  934 # The number of newlines before and after a property, indexer or event decl.
  935 # 0 = No change.
  936 nl_around_cs_property                     = 0        # number
  937 
  938 # The number of newlines between the get/set/add/remove handlers in C#.
  939 # 0 = No change.
  940 nl_between_get_set                        = 0        # number
  941 
  942 # Whether to remove blank lines after '{'
  943 eat_blanks_after_open_brace               = true     # false/true
  944 
  945 # Whether to remove blank lines before '}'
  946 eat_blanks_before_close_brace             = true     # false/true
  947 
  948 # How aggressively to remove extra newlines not in preproc.
  949 # 0: No change
  950 # 1: Remove most newlines not handled by other config
  951 # 2: Remove all newlines and reformat completely by config
  952 nl_remove_extra_newlines                  = 0        # number
  953 
  954 # Whether to put a blank line before 'return' statements, unless after an open brace.
  955 nl_before_return                          = false    # false/true
  956 
  957 # Whether to put a blank line after 'return' statements, unless followed by a close brace.
  958 nl_after_return                           = true     # false/true
  959 
  960 #
  961 # Code modifying options (non-whitespace)
  962 #
  963 
  964 # Add or remove braces on single-line 'do' statement
  965 mod_full_brace_do                         = add      # ignore/add/remove/force
  966 
  967 # Add or remove braces on single-line 'for' statement
  968 mod_full_brace_for                        = add      # ignore/add/remove/force
  969 
  970 # Add or remove braces on single-line 'if' statement. Will not remove the braces if they contain an 'else'.
  971 mod_full_brace_if                         = add      # ignore/add/remove/force
  972 
  973 # Make all if/elseif/else statements in a chain be braced or not. Overrides mod_full_brace_if.
  974 # If any must be braced, they are all braced.  If all can be unbraced, then the braces are removed.
  975 mod_full_brace_if_chain                   = false    # false/true
  976 
  977 # Don't remove braces around statements that span N newlines
  978 mod_full_brace_nl                         = 0        # number
  979 
  980 # Add or remove braces on single-line 'while' statement
  981 mod_full_brace_while                      = add      # ignore/add/remove/force
  982 
  983 # Whether to change optional semicolons to real semicolons
  984 mod_pawn_semicolon                        = false    # false/true
  985 
  986 # Add parens on 'while' and 'if' statement around bools
  987 mod_full_paren_if_bool                    = true     # false/true
  988 
  989 # Whether to remove superfluous semicolons
  990 mod_remove_extra_semicolon                = true     # false/true
  991 
  992 # If a function body exceeds the specified number of newlines and doesn't have a comment after
  993 # the close brace, a comment will be added.
  994 mod_add_long_function_closebrace_comment  = 0        # number
  995 
  996 # If a namespace body exceeds the specified number of newlines and doesn't have a comment after
  997 # the close brace, a comment will be added.
  998 mod_add_long_namespace_closebrace_comment = 0        # number
  999 
 1000 # If a switch body exceeds the specified number of newlines and doesn't have a comment after
 1001 # the close brace, a comment will be added.
 1002 mod_add_long_switch_closebrace_comment    = 0        # number
 1003 
 1004 # If an #ifdef body exceeds the specified number of newlines and doesn't have a comment after
 1005 # the #endif, a comment will be added.
 1006 mod_add_long_ifdef_endif_comment          = 0        # number
 1007 
 1008 # If an #ifdef or #else body exceeds the specified number of newlines and doesn't have a comment after
 1009 # the #else, a comment will be added.
 1010 mod_add_long_ifdef_else_comment           = 0        # number
 1011 
 1012 # If TRUE, will sort consecutive single-line 'import' statements [Java, D]
 1013 mod_sort_import                           = false    # false/true
 1014 
 1015 # If TRUE, will sort consecutive single-line 'using' statements [C#]
 1016 mod_sort_using                            = false    # false/true
 1017 
 1018 # If TRUE, will sort consecutive single-line '#include' statements [C/C++] and '#import' statements [Obj-C]
 1019 # This is generally a bad idea, as it may break your code.
 1020 mod_sort_include                          = false    # false/true
 1021 
 1022 # If TRUE, it will move a 'break' that appears after a fully braced 'case' before the close brace.
 1023 mod_move_case_break                       = false    # false/true
 1024 
 1025 # Will add or remove the braces around a fully braced case statement.
 1026 # Will only remove the braces if there are no variable declarations in the block.
 1027 mod_case_brace                            = remove   # ignore/add/remove/force
 1028 
 1029 # If TRUE, it will remove a void 'return;' that appears as the last statement in a function.
 1030 mod_remove_empty_return                   = true     # false/true
 1031 
 1032 #
 1033 # Comment modifications
 1034 #
 1035 
 1036 # Try to wrap comments at cmt_width columns
 1037 cmt_width                                 = 0        # number
 1038 
 1039 # Set the comment reflow mode (default: 0)
 1040 # 0: no reflowing (apart from the line wrapping due to cmt_width)
 1041 # 1: no touching at all
 1042 # 2: full reflow
 1043 cmt_reflow_mode                           = 0        # number
 1044 
 1045 # Whether to convert all tabs to spaces in comments. Default is to leave tabs inside comments alone, unless used for indenting.
 1046 cmt_convert_tab_to_spaces                 = false    # false/true
 1047 
 1048 # If false, disable all multi-line comment changes, including cmt_width. keyword substitution, and leading chars.
 1049 # Default is true.
 1050 cmt_indent_multi                          = true     # false/true
 1051 
 1052 # Whether to group c-comments that look like they are in a block
 1053 cmt_c_group                               = false    # false/true
 1054 
 1055 # Whether to put an empty '/*' on the first line of the combined c-comment
 1056 cmt_c_nl_start                            = false    # false/true
 1057 
 1058 # Whether to put a newline before the closing '*/' of the combined c-comment
 1059 cmt_c_nl_end                              = false    # false/true
 1060 
 1061 # Whether to group cpp-comments that look like they are in a block
 1062 cmt_cpp_group                             = false    # false/true
 1063 
 1064 # Whether to put an empty '/*' on the first line of the combined cpp-comment
 1065 cmt_cpp_nl_start                          = false    # false/true
 1066 
 1067 # Whether to put a newline before the closing '*/' of the combined cpp-comment
 1068 cmt_cpp_nl_end                            = false    # false/true
 1069 
 1070 # Whether to change cpp-comments into c-comments
 1071 cmt_cpp_to_c                              = false    # false/true
 1072 
 1073 # Whether to put a star on subsequent comment lines
 1074 cmt_star_cont                             = true     # false/true
 1075 
 1076 # The number of spaces to insert at the start of subsequent comment lines
 1077 cmt_sp_before_star_cont                   = 0        # number
 1078 
 1079 # The number of spaces to insert after the star on subsequent comment lines
 1080 cmt_sp_after_star_cont                    = 0        # number
 1081 
 1082 # For multi-line comments with a '*' lead, remove leading spaces if the first and last lines of
 1083 # the comment are the same length. Default=True
 1084 cmt_multi_check_last                      = true     # false/true
 1085 
 1086 # The filename that contains text to insert at the head of a file if the file doesn't start with a C/C++ comment.
 1087 # Will substitute $(filename) with the current file's name.
 1088 cmt_insert_file_header                    = ""         # string
 1089 
 1090 # The filename that contains text to insert at the end of a file if the file doesn't end with a C/C++ comment.
 1091 # Will substitute $(filename) with the current file's name.
 1092 cmt_insert_file_footer                    = ""         # string
 1093 
 1094 # The filename that contains text to insert before a function implementation if the function isn't preceded with a C/C++ comment.
 1095 # Will substitute $(function) with the function name and $(javaparam) with the javadoc @param and @return stuff.
 1096 # Will also substitute $(fclass) with the class name: void CFoo::Bar() { ... }
 1097 cmt_insert_func_header                    = ""         # string
 1098 
 1099 # The filename that contains text to insert before a class if the class isn't preceded with a C/C++ comment.
 1100 # Will substitute $(class) with the class name.
 1101 cmt_insert_class_header                   = ""         # string
 1102 
 1103 # The filename that contains text to insert before a Obj-C message specification if the method isn't preceded with a C/C++ comment.
 1104 # Will substitute $(message) with the function name and $(javaparam) with the javadoc @param and @return stuff.
 1105 cmt_insert_oc_msg_header                  = ""         # string
 1106 
 1107 # If a preprocessor is encountered when stepping backwards from a function name, then
 1108 # this option decides whether the comment should be inserted.
 1109 # Affects cmt_insert_oc_msg_header, cmt_insert_func_header and cmt_insert_class_header.
 1110 cmt_insert_before_preproc                 = false    # false/true
 1111 
 1112 #
 1113 # Preprocessor options
 1114 #
 1115 
 1116 # Control indent of preprocessors inside #if blocks at brace level 0 (file-level)
 1117 pp_indent                                 = remove   # ignore/add/remove/force
 1118 
 1119 # Whether to indent #if/#else/#endif at the brace level (true) or from column 1 (false)
 1120 pp_indent_at_level                        = false    # false/true
 1121 
 1122 # Specifies the number of columns to indent preprocessors per level at brace level 0 (file-level).
 1123 # If pp_indent_at_level=false, specifies the number of columns to indent preprocessors per level at brace level > 0 (function-level).
 1124 # Default=1.
 1125 pp_indent_count                           = 1        # number
 1126 
 1127 # Sets the number of spaces added with pp_space
 1128 pp_space_count                            = 0        # number
 1129 
 1130 # The indent for #region and #endregion in C# and '#pragma region' in C/C++
 1131 pp_indent_region                          = 0        # number
 1132 
 1133 # Whether to indent the code between #region and #endregion
 1134 pp_region_indent_code                     = false    # false/true
 1135 
 1136 # If pp_indent_at_level=true, sets the indent for #if, #else, and #endif when not at file-level.
 1137 # 0:  indent preprocessors using output_tab_size.
 1138 # >0: column at which all preprocessors will be indented.
 1139 pp_indent_if                              = 0        # number
 1140 
 1141 # Control whether to indent the code between #if, #else and #endif.
 1142 pp_if_indent_code                         = false    # false/true
 1143 
 1144 # Whether to indent '#define' at the brace level (true) or from column 1 (false)
 1145 pp_define_at_level                        = false    # false/true
 1146 
 1147 #
 1148 # Use or Do not Use options
 1149 #
 1150 
 1151 # True:  indent_func_call_param will be used
 1152 # False: indent_func_call_param will NOT be used
 1153 use_indent_func_call_param                = true     # false/true
 1154 
 1155 # True:  indent_continue will be used only once
 1156 # False: indent_continue will be used every time (default)
 1157 use_indent_continue_only_once             = false    # false/true
 1158 
 1159 # You can force a token to be a type with the 'type' option.
 1160 # Example:
 1161 # type myfoo1 myfoo2
 1162 #
 1163 # You can create custom macro-based indentation using macro-open,
 1164 # macro-else and macro-close.
 1165 # Example:
 1166 # macro-open  BEGIN_TEMPLATE_MESSAGE_MAP
 1167 # macro-open  BEGIN_MESSAGE_MAP
 1168 # macro-close END_MESSAGE_MAP
 1169 #
 1170 # You can assign any keyword to any type with the set option.
 1171 # set func_call_user _ N_
 1172 #
 1173 # The full syntax description of all custom definition config entries
 1174 # is shown below:
 1175 #
 1176 # define custom tokens as:
 1177 # - embed whitespace in token using '' escape character, or
 1178 #   put token in quotes
 1179 # - these: ' " and ` are recognized as quote delimiters
 1180 #
 1181 # type token1 token2 token3 ...
 1182 #             ^ optionally specify multiple tokens on a single line
 1183 # define def_token output_token
 1184 #                  ^ output_token is optional, then NULL is assumed
 1185 # macro-open token
 1186 # macro-close token
 1187 # macro-else token
 1188 # set id token1 token2 ...
 1189 #               ^ optionally specify multiple tokens on a single line
 1190 #     ^ id is one of the names in token_enum.h sans the CT_ prefix,
 1191 #       e.g. PP_PRAGMA
 1192 #
 1193 # all tokens are separated by any mix of ',' commas, '=' equal signs
 1194 # and whitespace (space, tab)
 1195 #
 1196 # You can add support for other file extensions using the 'file_ext' command.
 1197 # The first arg is the language name used with the '-l' option.
 1198 # The remaining args are file extensions, matched with 'endswith'.
 1199 #   file_ext CPP .ch .cxx .cpp.in
 1200 #