"Fossies" - the Fresh Open Source Software Archive

Member "udunits-2.2.28/Makefile.in" (8 Dec 2020, 41045 Bytes) of package /linux/privat/udunits-2.2.28.tar.gz:


As a special service "Fossies" has tried to format the requested text file into HTML format (style: standard) with prefixed line numbers. Alternatively you can here view or download the uninterpreted source code file. See also the latest Fossies "Diffs" side-by-side code changes report for "Makefile.in": 2.2.26_vs_2.2.28.

    1 # Makefile.in generated by automake 1.13.4 from Makefile.am.
    2 # @configure_input@
    3 
    4 # Copyright (C) 1994-2013 Free Software Foundation, Inc.
    5 
    6 # This Makefile.in is free software; the Free Software Foundation
    7 # gives unlimited permission to copy and/or distribute it,
    8 # with or without modifications, as long as this notice is preserved.
    9 
   10 # This program is distributed in the hope that it will be useful,
   11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
   12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
   13 # PARTICULAR PURPOSE.
   14 
   15 @SET_MAKE@
   16 
   17 VPATH = @srcdir@
   18 am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
   19 am__make_running_with_option = \
   20   case $${target_option-} in \
   21       ?) ;; \
   22       *) echo "am__make_running_with_option: internal error: invalid" \
   23               "target option '$${target_option-}' specified" >&2; \
   24          exit 1;; \
   25   esac; \
   26   has_opt=no; \
   27   sane_makeflags=$$MAKEFLAGS; \
   28   if $(am__is_gnu_make); then \
   29     sane_makeflags=$$MFLAGS; \
   30   else \
   31     case $$MAKEFLAGS in \
   32       *\\[\ \	]*) \
   33         bs=\\; \
   34         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
   35           | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
   36     esac; \
   37   fi; \
   38   skip_next=no; \
   39   strip_trailopt () \
   40   { \
   41     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
   42   }; \
   43   for flg in $$sane_makeflags; do \
   44     test $$skip_next = yes && { skip_next=no; continue; }; \
   45     case $$flg in \
   46       *=*|--*) continue;; \
   47         -*I) strip_trailopt 'I'; skip_next=yes;; \
   48       -*I?*) strip_trailopt 'I';; \
   49         -*O) strip_trailopt 'O'; skip_next=yes;; \
   50       -*O?*) strip_trailopt 'O';; \
   51         -*l) strip_trailopt 'l'; skip_next=yes;; \
   52       -*l?*) strip_trailopt 'l';; \
   53       -[dEDm]) skip_next=yes;; \
   54       -[JT]) skip_next=yes;; \
   55     esac; \
   56     case $$flg in \
   57       *$$target_option*) has_opt=yes; break;; \
   58     esac; \
   59   done; \
   60   test $$has_opt = yes
   61 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
   62 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
   63 pkgdatadir = $(datadir)/@PACKAGE@
   64 pkgincludedir = $(includedir)/@PACKAGE@
   65 pkglibdir = $(libdir)/@PACKAGE@
   66 pkglibexecdir = $(libexecdir)/@PACKAGE@
   67 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
   68 install_sh_DATA = $(install_sh) -c -m 644
   69 install_sh_PROGRAM = $(install_sh) -c
   70 install_sh_SCRIPT = $(install_sh) -c
   71 INSTALL_HEADER = $(INSTALL_DATA)
   72 transform = $(program_transform_name)
   73 NORMAL_INSTALL = :
   74 PRE_INSTALL = :
   75 POST_INSTALL = :
   76 NORMAL_UNINSTALL = :
   77 PRE_UNINSTALL = :
   78 POST_UNINSTALL = :
   79 build_triplet = @build@
   80 host_triplet = @host@
   81 subdir = .
   82 DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
   83 	$(top_srcdir)/configure $(am__configure_deps) \
   84 	$(srcdir)/config.h.in $(top_srcdir)/build-aux/mdate-sh \
   85 	$(srcdir)/version.texi $(srcdir)/stamp-vti \
   86 	$(top_srcdir)/build-aux/texinfo.tex $(dist_doc_DATA) BACKLOG \
   87 	README build-aux/compile build-aux/config.guess \
   88 	build-aux/config.sub build-aux/depcomp build-aux/install-sh \
   89 	build-aux/mdate-sh build-aux/missing build-aux/texinfo.tex \
   90 	build-aux/ylwrap build-aux/ltmain.sh \
   91 	$(top_srcdir)/build-aux/compile \
   92 	$(top_srcdir)/build-aux/config.guess \
   93 	$(top_srcdir)/build-aux/config.sub \
   94 	$(top_srcdir)/build-aux/install-sh \
   95 	$(top_srcdir)/build-aux/ltmain.sh \
   96 	$(top_srcdir)/build-aux/missing
   97 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
   98 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
   99 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
  100 	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
  101 	$(top_srcdir)/configure.ac
  102 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  103 	$(ACLOCAL_M4)
  104 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  105  configure.lineno config.status.lineno
  106 mkinstalldirs = $(install_sh) -d
  107 CONFIG_HEADER = config.h
  108 CONFIG_CLEAN_FILES =
  109 CONFIG_CLEAN_VPATH_FILES =
  110 AM_V_P = $(am__v_P_@AM_V@)
  111 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
  112 am__v_P_0 = false
  113 am__v_P_1 = :
  114 AM_V_GEN = $(am__v_GEN_@AM_V@)
  115 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
  116 am__v_GEN_0 = @echo "  GEN     " $@;
  117 am__v_GEN_1 = 
  118 AM_V_at = $(am__v_at_@AM_V@)
  119 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
  120 am__v_at_0 = @
  121 am__v_at_1 = 
  122 SOURCES =
  123 DIST_SOURCES =
  124 AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
  125 am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
  126 am__v_DVIPS_0 = @echo "  DVIPS   " $@;
  127 am__v_DVIPS_1 = 
  128 AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
  129 am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
  130 am__v_MAKEINFO_0 = @echo "  MAKEINFO" $@;
  131 am__v_MAKEINFO_1 = 
  132 AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
  133 am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
  134 am__v_INFOHTML_0 = @echo "  INFOHTML" $@;
  135 am__v_INFOHTML_1 = 
  136 AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
  137 am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
  138 am__v_TEXI2DVI_0 = @echo "  TEXI2DVI" $@;
  139 am__v_TEXI2DVI_1 = 
  140 AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
  141 am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
  142 am__v_TEXI2PDF_0 = @echo "  TEXI2PDF" $@;
  143 am__v_TEXI2PDF_1 = 
  144 AM_V_texinfo = $(am__v_texinfo_@AM_V@)
  145 am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
  146 am__v_texinfo_0 = -q
  147 am__v_texinfo_1 = 
  148 AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
  149 am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
  150 am__v_texidevnull_0 = > /dev/null
  151 am__v_texidevnull_1 = 
  152 INFO_DEPS = $(srcdir)/udunits2.info
  153 TEXINFO_TEX = $(top_srcdir)/build-aux/texinfo.tex
  154 am__TEXINFO_TEX_DIR = $(top_srcdir)/build-aux
  155 DVIS = udunits2.dvi
  156 PDFS = udunits2.pdf
  157 PSS = udunits2.ps
  158 HTMLS = udunits2.html
  159 TEXINFOS = udunits2.texi
  160 TEXI2DVI = texi2dvi
  161 TEXI2PDF = $(TEXI2DVI) --pdf --batch
  162 MAKEINFOHTML = $(MAKEINFO) --html
  163 DVIPS = dvips
  164 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
  165 	ctags-recursive dvi-recursive html-recursive info-recursive \
  166 	install-data-recursive install-dvi-recursive \
  167 	install-exec-recursive install-html-recursive \
  168 	install-info-recursive install-pdf-recursive \
  169 	install-ps-recursive install-recursive installcheck-recursive \
  170 	installdirs-recursive pdf-recursive ps-recursive \
  171 	tags-recursive uninstall-recursive
  172 am__can_run_installinfo = \
  173   case $$AM_UPDATE_INFO_DIR in \
  174     n|no|NO) false;; \
  175     *) (install-info --version) >/dev/null 2>&1;; \
  176   esac
  177 am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(docdir)"
  178 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
  179 am__vpath_adj = case $$p in \
  180     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
  181     *) f=$$p;; \
  182   esac;
  183 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
  184 am__install_max = 40
  185 am__nobase_strip_setup = \
  186   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
  187 am__nobase_strip = \
  188   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
  189 am__nobase_list = $(am__nobase_strip_setup); \
  190   for p in $$list; do echo "$$p $$p"; done | \
  191   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  192   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
  193     if (++n[$$2] == $(am__install_max)) \
  194       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
  195     END { for (dir in files) print dir, files[dir] }'
  196 am__base_list = \
  197   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  198   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
  199 am__uninstall_files_from_dir = { \
  200   test -z "$$files" \
  201     || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
  202     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
  203          $(am__cd) "$$dir" && rm -f $$files; }; \
  204   }
  205 DATA = $(dist_doc_DATA)
  206 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  207   distclean-recursive maintainer-clean-recursive
  208 am__recursive_targets = \
  209   $(RECURSIVE_TARGETS) \
  210   $(RECURSIVE_CLEAN_TARGETS) \
  211   $(am__extra_recursive_targets)
  212 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
  213 	cscope distdir dist dist-all distcheck
  214 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
  215 	$(LISP)config.h.in
  216 # Read a list of newline-separated strings from the standard input,
  217 # and print each of them once, without duplicates.  Input order is
  218 # *not* preserved.
  219 am__uniquify_input = $(AWK) '\
  220   BEGIN { nonempty = 0; } \
  221   { items[$$0] = 1; nonempty = 1; } \
  222   END { if (nonempty) { for (i in items) print i; }; } \
  223 '
  224 # Make sure the list of sources is unique.  This is necessary because,
  225 # e.g., the same source file might be shared among _SOURCES variables
  226 # for different programs/libraries.
  227 am__define_uniq_tagged_files = \
  228   list='$(am__tagged_files)'; \
  229   unique=`for i in $$list; do \
  230     if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  231   done | $(am__uniquify_input)`
  232 ETAGS = etags
  233 CTAGS = ctags
  234 CSCOPE = cscope
  235 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
  236 distdir = $(PACKAGE)-$(VERSION)
  237 top_distdir = $(distdir)
  238 am__remove_distdir = \
  239   if test -d "$(distdir)"; then \
  240     find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
  241       && rm -rf "$(distdir)" \
  242       || { sleep 5 && rm -rf "$(distdir)"; }; \
  243   else :; fi
  244 am__post_remove_distdir = $(am__remove_distdir)
  245 am__relativize = \
  246   dir0=`pwd`; \
  247   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  248   sed_rest='s,^[^/]*/*,,'; \
  249   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  250   sed_butlast='s,/*[^/]*$$,,'; \
  251   while test -n "$$dir1"; do \
  252     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
  253     if test "$$first" != "."; then \
  254       if test "$$first" = ".."; then \
  255         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
  256         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
  257       else \
  258         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
  259         if test "$$first2" = "$$first"; then \
  260           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
  261         else \
  262           dir2="../$$dir2"; \
  263         fi; \
  264         dir0="$$dir0"/"$$first"; \
  265       fi; \
  266     fi; \
  267     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  268   done; \
  269   reldir="$$dir2"
  270 DIST_ARCHIVES = $(distdir).tar.gz
  271 GZIP_ENV = --best
  272 DIST_TARGETS = dist-gzip
  273 distuninstallcheck_listfiles = find . -type f -print
  274 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
  275   | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
  276 distcleancheck_listfiles = find . -type f -print
  277 ACLOCAL = @ACLOCAL@
  278 AMTAR = @AMTAR@
  279 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
  280 AR = @AR@
  281 AS = @AS@
  282 AUTOCONF = @AUTOCONF@
  283 AUTOHEADER = @AUTOHEADER@
  284 AUTOMAKE = @AUTOMAKE@
  285 AWK = @AWK@
  286 CC = @CC@
  287 CCDEPMODE = @CCDEPMODE@
  288 CFLAGS = @CFLAGS@
  289 CFLAGS_COVERAGE = @CFLAGS_COVERAGE@
  290 CPP = @CPP@
  291 CPPFLAGS = @CPPFLAGS@
  292 CYGPATH_W = @CYGPATH_W@
  293 DEFS = @DEFS@
  294 DEPDIR = @DEPDIR@
  295 DLLTOOL = @DLLTOOL@
  296 DSYMUTIL = @DSYMUTIL@
  297 DUMPBIN = @DUMPBIN@
  298 ECHO_C = @ECHO_C@
  299 ECHO_N = @ECHO_N@
  300 ECHO_T = @ECHO_T@
  301 EGREP = @EGREP@
  302 EXEEXT = @EXEEXT@
  303 FC = @FC@
  304 FCFLAGS = @FCFLAGS@
  305 FGREP = @FGREP@
  306 GREP = @GREP@
  307 INSTALL = @INSTALL@
  308 INSTALL_DATA = @INSTALL_DATA@
  309 INSTALL_PROGRAM = @INSTALL_PROGRAM@
  310 INSTALL_SCRIPT = @INSTALL_SCRIPT@
  311 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
  312 LD = @LD@
  313 LDFLAGS = @LDFLAGS@
  314 LD_CUNIT = @LD_CUNIT@
  315 LEX = @LEX@
  316 LEXLIB = @LEXLIB@
  317 LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
  318 LIBOBJS = @LIBOBJS@
  319 LIBS = @LIBS@
  320 LIBS_COVERAGE = @LIBS_COVERAGE@
  321 LIBTOOL = @LIBTOOL@
  322 LIPO = @LIPO@
  323 LN_S = @LN_S@
  324 LTLIBOBJS = @LTLIBOBJS@
  325 MAKEINFO = @MAKEINFO@
  326 MANIFEST_TOOL = @MANIFEST_TOOL@
  327 MKDIR_P = @MKDIR_P@
  328 NM = @NM@
  329 NMEDIT = @NMEDIT@
  330 OBJDUMP = @OBJDUMP@
  331 OBJEXT = @OBJEXT@
  332 OTOOL = @OTOOL@
  333 OTOOL64 = @OTOOL64@
  334 PACKAGE = @PACKAGE@
  335 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
  336 PACKAGE_NAME = @PACKAGE_NAME@
  337 PACKAGE_STRING = @PACKAGE_STRING@
  338 PACKAGE_TARNAME = @PACKAGE_TARNAME@
  339 PACKAGE_URL = @PACKAGE_URL@
  340 PACKAGE_VERSION = @PACKAGE_VERSION@
  341 PATH_SEPARATOR = @PATH_SEPARATOR@
  342 RANLIB = @RANLIB@
  343 SED = @SED@
  344 SET_MAKE = @SET_MAKE@
  345 SHELL = @SHELL@
  346 STRIP = @STRIP@
  347 VERSION = @VERSION@
  348 YACC = @YACC@
  349 YFLAGS = @YFLAGS@
  350 abs_builddir = @abs_builddir@
  351 abs_srcdir = @abs_srcdir@
  352 abs_top_builddir = @abs_top_builddir@
  353 abs_top_srcdir = @abs_top_srcdir@
  354 ac_ct_AR = @ac_ct_AR@
  355 ac_ct_CC = @ac_ct_CC@
  356 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
  357 ac_ct_FC = @ac_ct_FC@
  358 am__include = @am__include@
  359 am__leading_dot = @am__leading_dot@
  360 am__quote = @am__quote@
  361 am__tar = @am__tar@
  362 am__untar = @am__untar@
  363 bindir = @bindir@
  364 build = @build@
  365 build_alias = @build_alias@
  366 build_cpu = @build_cpu@
  367 build_os = @build_os@
  368 build_vendor = @build_vendor@
  369 builddir = @builddir@
  370 datadir = @datadir@
  371 datarootdir = @datarootdir@
  372 docdir = @docdir@
  373 dvidir = @dvidir@
  374 exec_prefix = @exec_prefix@
  375 host = @host@
  376 host_alias = @host_alias@
  377 host_cpu = @host_cpu@
  378 host_os = @host_os@
  379 host_vendor = @host_vendor@
  380 htmldir = @htmldir@
  381 includedir = @includedir@
  382 infodir = @infodir@
  383 install_sh = @install_sh@
  384 libdir = @libdir@
  385 libexecdir = @libexecdir@
  386 localedir = @localedir@
  387 localstatedir = @localstatedir@
  388 mandir = @mandir@
  389 mkdir_p = @mkdir_p@
  390 oldincludedir = @oldincludedir@
  391 pdfdir = @pdfdir@
  392 prefix = @prefix@
  393 program_transform_name = @program_transform_name@
  394 psdir = @psdir@
  395 sbindir = @sbindir@
  396 sharedstatedir = @sharedstatedir@
  397 srcdir = @srcdir@
  398 sysconfdir = @sysconfdir@
  399 target_alias = @target_alias@
  400 top_build_prefix = @top_build_prefix@
  401 top_builddir = @top_builddir@
  402 top_srcdir = @top_srcdir@
  403 
  404 # Copyright 2020 University Corporation for Atmospheric Research. All rights
  405 # reserved.
  406 #
  407 # This file is part of the UDUNITS-2 package.  See the file COPYRIGHT
  408 # in the top-level source-directory of the package for copying and
  409 # redistribution conditions.
  410 #
  411 ACLOCAL_AMFLAGS = -I m4
  412 SUBDIRS = lib prog
  413 DIST_SUBDIRS = lib prog
  414 info_TEXINFOS = udunits2.texi
  415 EXTRA_DIST = \
  416     CHANGE_LOG \
  417     CMakeLists.txt \
  418     COPYRIGHT \
  419     udunits2.html \
  420     udunits2.pdf \
  421     version.texi
  422 
  423 AM_MAKEINFOHTMLFLAGS = --no-split
  424 RSYNC_FLAGS = --rsh=ssh --rsync-path=/usr/bin/rsync
  425 distName = $(PACKAGE)-$(VERSION)
  426 distArchive = $(distName).tar.gz
  427 CLEANFILES = *~
  428 MAINTAINERCLEANFILES = *.gz build *~
  429 DISTCLEANFILES = *.log *.gz build *~
  430 dist_doc_DATA = CHANGE_LOG COPYRIGHT README
  431 all: config.h
  432 	$(MAKE) $(AM_MAKEFLAGS) all-recursive
  433 
  434 .SUFFIXES:
  435 .SUFFIXES: .dvi .html .info .pdf .ps .texi
  436 am--refresh: Makefile
  437 	@:
  438 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
  439 	@for dep in $?; do \
  440 	  case '$(am__configure_deps)' in \
  441 	    *$$dep*) \
  442 	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
  443 	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
  444 		&& exit 0; \
  445 	      exit 1;; \
  446 	  esac; \
  447 	done; \
  448 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
  449 	$(am__cd) $(top_srcdir) && \
  450 	  $(AUTOMAKE) --foreign Makefile
  451 .PRECIOUS: Makefile
  452 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
  453 	@case '$?' in \
  454 	  *config.status*) \
  455 	    echo ' $(SHELL) ./config.status'; \
  456 	    $(SHELL) ./config.status;; \
  457 	  *) \
  458 	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
  459 	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
  460 	esac;
  461 
  462 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
  463 	$(SHELL) ./config.status --recheck
  464 
  465 $(top_srcdir)/configure:  $(am__configure_deps)
  466 	$(am__cd) $(srcdir) && $(AUTOCONF)
  467 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
  468 	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
  469 $(am__aclocal_m4_deps):
  470 
  471 config.h: stamp-h1
  472 	@if test ! -f $@; then rm -f stamp-h1; else :; fi
  473 	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
  474 
  475 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
  476 	@rm -f stamp-h1
  477 	cd $(top_builddir) && $(SHELL) ./config.status config.h
  478 $(srcdir)/config.h.in:  $(am__configure_deps) 
  479 	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
  480 	rm -f stamp-h1
  481 	touch $@
  482 
  483 distclean-hdr:
  484 	-rm -f config.h stamp-h1
  485 
  486 mostlyclean-libtool:
  487 	-rm -f *.lo
  488 
  489 clean-libtool:
  490 	-rm -rf .libs _libs
  491 
  492 distclean-libtool:
  493 	-rm -f libtool config.lt
  494 
  495 .texi.info:
  496 	$(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
  497 	am__cwd=`pwd` && $(am__cd) $(srcdir) && \
  498 	rm -rf $$backupdir && mkdir $$backupdir && \
  499 	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
  500 	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
  501 	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
  502 	  done; \
  503 	else :; fi && \
  504 	cd "$$am__cwd"; \
  505 	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
  506 	 -o $@ $<; \
  507 	then \
  508 	  rc=0; \
  509 	  $(am__cd) $(srcdir); \
  510 	else \
  511 	  rc=$$?; \
  512 	  $(am__cd) $(srcdir) && \
  513 	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
  514 	fi; \
  515 	rm -rf $$backupdir; exit $$rc
  516 
  517 .texi.dvi:
  518 	$(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
  519 	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
  520 	$(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
  521 	$<
  522 
  523 .texi.pdf:
  524 	$(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
  525 	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
  526 	$(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
  527 	$<
  528 
  529 .texi.html:
  530 	$(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
  531 	$(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
  532 	 -o $(@:.html=.htp) $<; \
  533 	then \
  534 	  rm -rf $@; \
  535 	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
  536 	    mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
  537 	else \
  538 	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
  539 	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
  540 	  exit 1; \
  541 	fi
  542 $(srcdir)/udunits2.info: udunits2.texi $(srcdir)/version.texi
  543 udunits2.dvi: udunits2.texi $(srcdir)/version.texi
  544 $(srcdir)/stamp-vti: udunits2.texi $(top_srcdir)/configure
  545 	@(dir=.; test -f ./udunits2.texi || dir=$(srcdir); \
  546 	set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/udunits2.texi`; \
  547 	echo "@set UPDATED $$1 $$2 $$3"; \
  548 	echo "@set UPDATED-MONTH $$2 $$3"; \
  549 	echo "@set EDITION $(VERSION)"; \
  550 	echo "@set VERSION $(VERSION)") > vti.tmp
  551 	@cmp -s vti.tmp $(srcdir)/version.texi \
  552 	  || (echo "Updating $(srcdir)/version.texi"; \
  553 	      cp vti.tmp $(srcdir)/version.texi)
  554 	-@rm -f vti.tmp
  555 	@cp $(srcdir)/version.texi $@
  556 
  557 mostlyclean-vti:
  558 	-rm -f vti.tmp
  559 
  560 maintainer-clean-vti:
  561 	-rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
  562 .dvi.ps:
  563 	$(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
  564 	$(DVIPS) $(AM_V_texinfo) -o $@ $<
  565 
  566 uninstall-dvi-am:
  567 	@$(NORMAL_UNINSTALL)
  568 	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
  569 	for p in $$list; do \
  570 	  $(am__strip_dir) \
  571 	  echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
  572 	  rm -f "$(DESTDIR)$(dvidir)/$$f"; \
  573 	done
  574 
  575 uninstall-html-am:
  576 	@$(NORMAL_UNINSTALL)
  577 	@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
  578 	for p in $$list; do \
  579 	  $(am__strip_dir) \
  580 	  echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
  581 	  rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
  582 	done
  583 
  584 uninstall-info-am:
  585 	@$(PRE_UNINSTALL)
  586 	@if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
  587 	  list='$(INFO_DEPS)'; \
  588 	  for file in $$list; do \
  589 	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
  590 	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
  591 	    if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
  592 	    then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
  593 	  done; \
  594 	else :; fi
  595 	@$(NORMAL_UNINSTALL)
  596 	@list='$(INFO_DEPS)'; \
  597 	for file in $$list; do \
  598 	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
  599 	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
  600 	  (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
  601 	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
  602 	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
  603 	   else :; fi); \
  604 	done
  605 
  606 uninstall-pdf-am:
  607 	@$(NORMAL_UNINSTALL)
  608 	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
  609 	for p in $$list; do \
  610 	  $(am__strip_dir) \
  611 	  echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
  612 	  rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
  613 	done
  614 
  615 uninstall-ps-am:
  616 	@$(NORMAL_UNINSTALL)
  617 	@list='$(PSS)'; test -n "$(psdir)" || list=; \
  618 	for p in $$list; do \
  619 	  $(am__strip_dir) \
  620 	  echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
  621 	  rm -f "$(DESTDIR)$(psdir)/$$f"; \
  622 	done
  623 
  624 dist-info: $(INFO_DEPS)
  625 	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
  626 	list='$(INFO_DEPS)'; \
  627 	for base in $$list; do \
  628 	  case $$base in \
  629 	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
  630 	  esac; \
  631 	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
  632 	  base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
  633 	  for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
  634 	    if test -f $$file; then \
  635 	      relfile=`expr "$$file" : "$$d/\(.*\)"`; \
  636 	      test -f "$(distdir)/$$relfile" || \
  637 		cp -p $$file "$(distdir)/$$relfile"; \
  638 	    else :; fi; \
  639 	  done; \
  640 	done
  641 
  642 mostlyclean-aminfo:
  643 	-rm -rf udunits2.t2d udunits2.t2p
  644 
  645 clean-aminfo:
  646 	-test -z "udunits2.dvi udunits2.pdf udunits2.ps udunits2.html" \
  647 	|| rm -rf udunits2.dvi udunits2.pdf udunits2.ps udunits2.html
  648 
  649 maintainer-clean-aminfo:
  650 	@list='$(INFO_DEPS)'; for i in $$list; do \
  651 	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
  652 	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
  653 	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
  654 	done
  655 install-dist_docDATA: $(dist_doc_DATA)
  656 	@$(NORMAL_INSTALL)
  657 	@list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
  658 	if test -n "$$list"; then \
  659 	  echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \
  660 	  $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \
  661 	fi; \
  662 	for p in $$list; do \
  663 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
  664 	  echo "$$d$$p"; \
  665 	done | $(am__base_list) | \
  666 	while read files; do \
  667 	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
  668 	  $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
  669 	done
  670 
  671 uninstall-dist_docDATA:
  672 	@$(NORMAL_UNINSTALL)
  673 	@list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
  674 	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
  675 	dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir)
  676 
  677 # This directory's subdirectories are mostly independent; you can cd
  678 # into them and run 'make' without going through this Makefile.
  679 # To change the values of 'make' variables: instead of editing Makefiles,
  680 # (1) if the variable is set in 'config.status', edit 'config.status'
  681 #     (which will cause the Makefiles to be regenerated when you run 'make');
  682 # (2) otherwise, pass the desired values on the 'make' command line.
  683 $(am__recursive_targets):
  684 	@fail=; \
  685 	if $(am__make_keepgoing); then \
  686 	  failcom='fail=yes'; \
  687 	else \
  688 	  failcom='exit 1'; \
  689 	fi; \
  690 	dot_seen=no; \
  691 	target=`echo $@ | sed s/-recursive//`; \
  692 	case "$@" in \
  693 	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
  694 	  *) list='$(SUBDIRS)' ;; \
  695 	esac; \
  696 	for subdir in $$list; do \
  697 	  echo "Making $$target in $$subdir"; \
  698 	  if test "$$subdir" = "."; then \
  699 	    dot_seen=yes; \
  700 	    local_target="$$target-am"; \
  701 	  else \
  702 	    local_target="$$target"; \
  703 	  fi; \
  704 	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
  705 	  || eval $$failcom; \
  706 	done; \
  707 	if test "$$dot_seen" = "no"; then \
  708 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
  709 	fi; test -z "$$fail"
  710 
  711 ID: $(am__tagged_files)
  712 	$(am__define_uniq_tagged_files); mkid -fID $$unique
  713 tags: tags-recursive
  714 TAGS: tags
  715 
  716 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
  717 	set x; \
  718 	here=`pwd`; \
  719 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
  720 	  include_option=--etags-include; \
  721 	  empty_fix=.; \
  722 	else \
  723 	  include_option=--include; \
  724 	  empty_fix=; \
  725 	fi; \
  726 	list='$(SUBDIRS)'; for subdir in $$list; do \
  727 	  if test "$$subdir" = .; then :; else \
  728 	    test ! -f $$subdir/TAGS || \
  729 	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
  730 	  fi; \
  731 	done; \
  732 	$(am__define_uniq_tagged_files); \
  733 	shift; \
  734 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
  735 	  test -n "$$unique" || unique=$$empty_fix; \
  736 	  if test $$# -gt 0; then \
  737 	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
  738 	      "$$@" $$unique; \
  739 	  else \
  740 	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
  741 	      $$unique; \
  742 	  fi; \
  743 	fi
  744 ctags: ctags-recursive
  745 
  746 CTAGS: ctags
  747 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
  748 	$(am__define_uniq_tagged_files); \
  749 	test -z "$(CTAGS_ARGS)$$unique" \
  750 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
  751 	     $$unique
  752 
  753 GTAGS:
  754 	here=`$(am__cd) $(top_builddir) && pwd` \
  755 	  && $(am__cd) $(top_srcdir) \
  756 	  && gtags -i $(GTAGS_ARGS) "$$here"
  757 cscope: cscope.files
  758 	test ! -s cscope.files \
  759 	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
  760 clean-cscope:
  761 	-rm -f cscope.files
  762 cscope.files: clean-cscope cscopelist
  763 cscopelist: cscopelist-recursive
  764 
  765 cscopelist-am: $(am__tagged_files)
  766 	list='$(am__tagged_files)'; \
  767 	case "$(srcdir)" in \
  768 	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
  769 	  *) sdir=$(subdir)/$(srcdir) ;; \
  770 	esac; \
  771 	for i in $$list; do \
  772 	  if test -f "$$i"; then \
  773 	    echo "$(subdir)/$$i"; \
  774 	  else \
  775 	    echo "$$sdir/$$i"; \
  776 	  fi; \
  777 	done >> $(top_builddir)/cscope.files
  778 
  779 distclean-tags:
  780 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
  781 	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
  782 
  783 distdir: $(DISTFILES)
  784 	$(am__remove_distdir)
  785 	test -d "$(distdir)" || mkdir "$(distdir)"
  786 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
  787 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
  788 	list='$(DISTFILES)'; \
  789 	  dist_files=`for file in $$list; do echo $$file; done | \
  790 	  sed -e "s|^$$srcdirstrip/||;t" \
  791 	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
  792 	case $$dist_files in \
  793 	  */*) $(MKDIR_P) `echo "$$dist_files" | \
  794 			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
  795 			   sort -u` ;; \
  796 	esac; \
  797 	for file in $$dist_files; do \
  798 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
  799 	  if test -d $$d/$$file; then \
  800 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
  801 	    if test -d "$(distdir)/$$file"; then \
  802 	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
  803 	    fi; \
  804 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
  805 	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
  806 	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
  807 	    fi; \
  808 	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
  809 	  else \
  810 	    test -f "$(distdir)/$$file" \
  811 	    || cp -p $$d/$$file "$(distdir)/$$file" \
  812 	    || exit 1; \
  813 	  fi; \
  814 	done
  815 	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
  816 	  if test "$$subdir" = .; then :; else \
  817 	    $(am__make_dryrun) \
  818 	      || test -d "$(distdir)/$$subdir" \
  819 	      || $(MKDIR_P) "$(distdir)/$$subdir" \
  820 	      || exit 1; \
  821 	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
  822 	    $(am__relativize); \
  823 	    new_distdir=$$reldir; \
  824 	    dir1=$$subdir; dir2="$(top_distdir)"; \
  825 	    $(am__relativize); \
  826 	    new_top_distdir=$$reldir; \
  827 	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
  828 	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
  829 	    ($(am__cd) $$subdir && \
  830 	      $(MAKE) $(AM_MAKEFLAGS) \
  831 	        top_distdir="$$new_top_distdir" \
  832 	        distdir="$$new_distdir" \
  833 		am__remove_distdir=: \
  834 		am__skip_length_check=: \
  835 		am__skip_mode_fix=: \
  836 	        distdir) \
  837 	      || exit 1; \
  838 	  fi; \
  839 	done
  840 	$(MAKE) $(AM_MAKEFLAGS) \
  841 	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
  842 	  dist-info
  843 	-test -n "$(am__skip_mode_fix)" \
  844 	|| find "$(distdir)" -type d ! -perm -755 \
  845 		-exec chmod u+rwx,go+rx {} \; -o \
  846 	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
  847 	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
  848 	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
  849 	|| chmod -R a+r "$(distdir)"
  850 dist-gzip: distdir
  851 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
  852 	$(am__post_remove_distdir)
  853 
  854 dist-bzip2: distdir
  855 	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
  856 	$(am__post_remove_distdir)
  857 
  858 dist-lzip: distdir
  859 	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
  860 	$(am__post_remove_distdir)
  861 
  862 dist-xz: distdir
  863 	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
  864 	$(am__post_remove_distdir)
  865 
  866 dist-tarZ: distdir
  867 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
  868 	$(am__post_remove_distdir)
  869 
  870 dist-shar: distdir
  871 	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
  872 	$(am__post_remove_distdir)
  873 
  874 dist-zip: distdir
  875 	-rm -f $(distdir).zip
  876 	zip -rq $(distdir).zip $(distdir)
  877 	$(am__post_remove_distdir)
  878 
  879 dist dist-all:
  880 	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
  881 	$(am__post_remove_distdir)
  882 
  883 # This target untars the dist file and tries a VPATH configuration.  Then
  884 # it guarantees that the distribution is self-contained by making another
  885 # tarfile.
  886 distcheck: dist
  887 	case '$(DIST_ARCHIVES)' in \
  888 	*.tar.gz*) \
  889 	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
  890 	*.tar.bz2*) \
  891 	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
  892 	*.tar.lz*) \
  893 	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
  894 	*.tar.xz*) \
  895 	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
  896 	*.tar.Z*) \
  897 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
  898 	*.shar.gz*) \
  899 	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
  900 	*.zip*) \
  901 	  unzip $(distdir).zip ;;\
  902 	esac
  903 	chmod -R a-w $(distdir)
  904 	chmod u+w $(distdir)
  905 	mkdir $(distdir)/_build $(distdir)/_inst
  906 	chmod a-w $(distdir)
  907 	test -d $(distdir)/_build || exit 0; \
  908 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
  909 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
  910 	  && am__cwd=`pwd` \
  911 	  && $(am__cd) $(distdir)/_build \
  912 	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
  913 	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
  914 	    $(DISTCHECK_CONFIGURE_FLAGS) \
  915 	  && $(MAKE) $(AM_MAKEFLAGS) \
  916 	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
  917 	  && $(MAKE) $(AM_MAKEFLAGS) check \
  918 	  && $(MAKE) $(AM_MAKEFLAGS) install \
  919 	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
  920 	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
  921 	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
  922 	        distuninstallcheck \
  923 	  && chmod -R a-w "$$dc_install_base" \
  924 	  && ({ \
  925 	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
  926 	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
  927 	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
  928 	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
  929 	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
  930 	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
  931 	  && rm -rf "$$dc_destdir" \
  932 	  && $(MAKE) $(AM_MAKEFLAGS) dist \
  933 	  && rm -rf $(DIST_ARCHIVES) \
  934 	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
  935 	  && cd "$$am__cwd" \
  936 	  || exit 1
  937 	$(am__post_remove_distdir)
  938 	@(echo "$(distdir) archives ready for distribution: "; \
  939 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
  940 	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
  941 distuninstallcheck:
  942 	@test -n '$(distuninstallcheck_dir)' || { \
  943 	  echo 'ERROR: trying to run $@ with an empty' \
  944 	       '$$(distuninstallcheck_dir)' >&2; \
  945 	  exit 1; \
  946 	}; \
  947 	$(am__cd) '$(distuninstallcheck_dir)' || { \
  948 	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
  949 	  exit 1; \
  950 	}; \
  951 	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
  952 	   || { echo "ERROR: files left after uninstall:" ; \
  953 	        if test -n "$(DESTDIR)"; then \
  954 	          echo "  (check DESTDIR support)"; \
  955 	        fi ; \
  956 	        $(distuninstallcheck_listfiles) ; \
  957 	        exit 1; } >&2
  958 distcleancheck: distclean
  959 	@if test '$(srcdir)' = . ; then \
  960 	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
  961 	  exit 1 ; \
  962 	fi
  963 	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
  964 	  || { echo "ERROR: files left in build directory after distclean:" ; \
  965 	       $(distcleancheck_listfiles) ; \
  966 	       exit 1; } >&2
  967 check-am: all-am
  968 check: check-recursive
  969 all-am: Makefile $(INFO_DEPS) $(DATA) config.h
  970 installdirs: installdirs-recursive
  971 installdirs-am:
  972 	for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(docdir)"; do \
  973 	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
  974 	done
  975 install: install-recursive
  976 install-exec: install-exec-recursive
  977 install-data: install-data-recursive
  978 uninstall: uninstall-recursive
  979 
  980 install-am: all-am
  981 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
  982 
  983 installcheck: installcheck-recursive
  984 install-strip:
  985 	if test -z '$(STRIP)'; then \
  986 	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
  987 	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
  988 	      install; \
  989 	else \
  990 	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
  991 	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
  992 	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
  993 	fi
  994 mostlyclean-generic:
  995 
  996 clean-generic:
  997 	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
  998 
  999 distclean-generic:
 1000 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 1001 	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 1002 	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
 1003 
 1004 maintainer-clean-generic:
 1005 	@echo "This command is intended for maintainers to use"
 1006 	@echo "it deletes files that may require special tools to rebuild."
 1007 	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
 1008 clean: clean-recursive
 1009 
 1010 clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am
 1011 
 1012 distclean: distclean-recursive
 1013 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
 1014 	-rm -f Makefile
 1015 distclean-am: clean-am distclean-generic distclean-hdr \
 1016 	distclean-libtool distclean-tags
 1017 
 1018 dvi: dvi-recursive
 1019 
 1020 dvi-am: $(DVIS)
 1021 
 1022 html: html-recursive
 1023 
 1024 html-am: $(HTMLS)
 1025 
 1026 info: info-recursive
 1027 
 1028 info-am: $(INFO_DEPS)
 1029 
 1030 install-data-am: install-dist_docDATA install-info-am
 1031 
 1032 install-dvi: install-dvi-recursive
 1033 
 1034 install-dvi-am: $(DVIS)
 1035 	@$(NORMAL_INSTALL)
 1036 	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
 1037 	if test -n "$$list"; then \
 1038 	  echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
 1039 	  $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
 1040 	fi; \
 1041 	for p in $$list; do \
 1042 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 1043 	  echo "$$d$$p"; \
 1044 	done | $(am__base_list) | \
 1045 	while read files; do \
 1046 	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
 1047 	  $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
 1048 	done
 1049 install-exec-am:
 1050 
 1051 install-html: install-html-recursive
 1052 
 1053 install-html-am: $(HTMLS)
 1054 	@$(NORMAL_INSTALL)
 1055 	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
 1056 	if test -n "$$list"; then \
 1057 	  echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
 1058 	  $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
 1059 	fi; \
 1060 	for p in $$list; do \
 1061 	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
 1062 	  $(am__strip_dir) \
 1063 	  d2=$$d$$p; \
 1064 	  if test -d "$$d2"; then \
 1065 	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
 1066 	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
 1067 	    echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
 1068 	    $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
 1069 	  else \
 1070 	    list2="$$list2 $$d2"; \
 1071 	  fi; \
 1072 	done; \
 1073 	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
 1074 	while read files; do \
 1075 	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
 1076 	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
 1077 	done; }
 1078 install-info: install-info-recursive
 1079 
 1080 install-info-am: $(INFO_DEPS)
 1081 	@$(NORMAL_INSTALL)
 1082 	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
 1083 	list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
 1084 	if test -n "$$list"; then \
 1085 	  echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
 1086 	  $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
 1087 	fi; \
 1088 	for file in $$list; do \
 1089 	  case $$file in \
 1090 	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
 1091 	  esac; \
 1092 	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
 1093 	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
 1094 	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
 1095 	               $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
 1096 	    if test -f $$ifile; then \
 1097 	      echo "$$ifile"; \
 1098 	    else : ; fi; \
 1099 	  done; \
 1100 	done | $(am__base_list) | \
 1101 	while read files; do \
 1102 	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
 1103 	  $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
 1104 	@$(POST_INSTALL)
 1105 	@if $(am__can_run_installinfo); then \
 1106 	  list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
 1107 	  for file in $$list; do \
 1108 	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
 1109 	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
 1110 	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
 1111 	  done; \
 1112 	else : ; fi
 1113 install-man:
 1114 
 1115 install-pdf: install-pdf-recursive
 1116 
 1117 install-pdf-am: $(PDFS)
 1118 	@$(NORMAL_INSTALL)
 1119 	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
 1120 	if test -n "$$list"; then \
 1121 	  echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
 1122 	  $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
 1123 	fi; \
 1124 	for p in $$list; do \
 1125 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 1126 	  echo "$$d$$p"; \
 1127 	done | $(am__base_list) | \
 1128 	while read files; do \
 1129 	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
 1130 	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
 1131 install-ps: install-ps-recursive
 1132 
 1133 install-ps-am: $(PSS)
 1134 	@$(NORMAL_INSTALL)
 1135 	@list='$(PSS)'; test -n "$(psdir)" || list=; \
 1136 	if test -n "$$list"; then \
 1137 	  echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
 1138 	  $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
 1139 	fi; \
 1140 	for p in $$list; do \
 1141 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 1142 	  echo "$$d$$p"; \
 1143 	done | $(am__base_list) | \
 1144 	while read files; do \
 1145 	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
 1146 	  $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
 1147 installcheck-am:
 1148 
 1149 maintainer-clean: maintainer-clean-recursive
 1150 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
 1151 	-rm -rf $(top_srcdir)/autom4te.cache
 1152 	-rm -f Makefile
 1153 maintainer-clean-am: distclean-am maintainer-clean-aminfo \
 1154 	maintainer-clean-generic maintainer-clean-vti
 1155 
 1156 mostlyclean: mostlyclean-recursive
 1157 
 1158 mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
 1159 	mostlyclean-libtool mostlyclean-vti
 1160 
 1161 pdf: pdf-recursive
 1162 
 1163 pdf-am: $(PDFS)
 1164 
 1165 ps: ps-recursive
 1166 
 1167 ps-am: $(PSS)
 1168 
 1169 uninstall-am: uninstall-dist_docDATA uninstall-dvi-am \
 1170 	uninstall-html-am uninstall-info-am uninstall-pdf-am \
 1171 	uninstall-ps-am
 1172 
 1173 .MAKE: $(am__recursive_targets) all install-am install-strip
 1174 
 1175 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
 1176 	am--refresh check check-am clean clean-aminfo clean-cscope \
 1177 	clean-generic clean-libtool cscope cscopelist-am ctags \
 1178 	ctags-am dist dist-all dist-bzip2 dist-gzip dist-info \
 1179 	dist-lzip dist-shar dist-tarZ dist-xz dist-zip distcheck \
 1180 	distclean distclean-generic distclean-hdr distclean-libtool \
 1181 	distclean-tags distcleancheck distdir distuninstallcheck dvi \
 1182 	dvi-am html html-am info info-am install install-am \
 1183 	install-data install-data-am install-dist_docDATA install-dvi \
 1184 	install-dvi-am install-exec install-exec-am install-html \
 1185 	install-html-am install-info install-info-am install-man \
 1186 	install-pdf install-pdf-am install-ps install-ps-am \
 1187 	install-strip installcheck installcheck-am installdirs \
 1188 	installdirs-am maintainer-clean maintainer-clean-aminfo \
 1189 	maintainer-clean-generic maintainer-clean-vti mostlyclean \
 1190 	mostlyclean-aminfo mostlyclean-generic mostlyclean-libtool \
 1191 	mostlyclean-vti pdf pdf-am ps ps-am tags tags-am uninstall \
 1192 	uninstall-am uninstall-dist_docDATA uninstall-dvi-am \
 1193 	uninstall-html-am uninstall-info-am uninstall-pdf-am \
 1194 	uninstall-ps-am
 1195 
 1196 
 1197 ftp:	dist
 1198 	scp $(distArchive) ftp.unidata.ucar.edu:/web/ftp/pub/$(PACKAGE)/
 1199 
 1200 web-update:	install install-html
 1201 	cd $(DESTDIR)$(htmldir) && \
 1202             rsync $(RSYNC_FLAGS) -aCu --delete --delete-excluded \
 1203                 $(DESTDIR)$(datarootdir)/ \
 1204                 www.unidata.ucar.edu:/web/content/software/$(PACKAGE)/$(distName)
 1205 	ssh www.unidata.ucar.edu rm -f /web/content/software/$(PACKAGE)/$(PACKAGE)-current
 1206 	ssh www.unidata.ucar.edu ln -s $(distName) /web/content/software/$(PACKAGE)/$(PACKAGE)-current
 1207 
 1208 download-update:
 1209 	cat /web/content/downloads/udunits/toc.xml \
 1210 	    | sed -e \
 1211 		's/"%current%" value=".*"/"%current%" value="$(VERSION)"/' \
 1212 		>toc.xml.new
 1213 	cp /web/content/downloads/$(PACKAGE)/toc.xml \
 1214 	    /web/content/downloads/$(PACKAGE)/toc.xml.old
 1215 	mv toc.xml.new /web/content/downloads/udunits/toc.xml
 1216 
 1217 available:	ftp web-update download-update
 1218 
 1219 release: 	ftp web-update
 1220 
 1221 .PHONY:	hostchecks hostcheck remote-checks web-update ftp \
 1222 	download-update available release
 1223 
 1224 udunits2.info:	version.texi COPYRIGHT
 1225 udunits2.html:	version.texi COPYRIGHT
 1226 udunits2.pdf:	version.texi COPYRIGHT
 1227 
 1228 $(srcdir)/version.texi:  $(srcdir)/stamp-vti
 1229 	@cp $(srcdir)/stamp-vti $@
 1230 
 1231 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 1232 # Otherwise a system limit (for SysV at least) may be exceeded.
 1233 .NOEXPORT: