"Fossies" - the Fresh Open Source Software Archive

Member "gpgme-1.15.1/Makefile.in" (8 Jan 2021, 34071 Bytes) of package /linux/privat/gpgme-1.15.1.tar.bz2:


As a special service "Fossies" has tried to format the requested text file into HTML format (style: standard) with prefixed line numbers. Alternatively you can here view or download the uninterpreted source code file. See also the latest Fossies "Diffs" side-by-side code changes report for "Makefile.in": 1.15.0_vs_1.15.1.

    1 # Makefile.in generated by automake 1.16.1 from Makefile.am.
    2 # @configure_input@
    3 
    4 # Copyright (C) 1994-2018 Free Software Foundation, Inc.
    5 
    6 # This Makefile.in is free software; the Free Software Foundation
    7 # gives unlimited permission to copy and/or distribute it,
    8 # with or without modifications, as long as this notice is preserved.
    9 
   10 # This program is distributed in the hope that it will be useful,
   11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
   12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
   13 # PARTICULAR PURPOSE.
   14 
   15 @SET_MAKE@
   16 
   17 # Makefile.am - Top level Makefile for GPGME.
   18 # Copyright (C) 2000 Werner Koch (dd9jn)
   19 # Copyright (C) 2001, 2002, 2004, 2005, 2008, 2009 g10 Code GmbH
   20 #
   21 # This file is part of GPGME.
   22 #
   23 # GPGME is free software; you can redistribute it and/or modify it
   24 # under the terms of the GNU Lesser General Public License as
   25 # published by the Free Software Foundation; either version 2.1 of the
   26 # License, or (at your option) any later version.
   27 #
   28 # GPGME is distributed in the hope that it will be useful, but WITHOUT
   29 # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
   30 # or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General
   31 # Public License for more details.
   32 #
   33 # You should have received a copy of the GNU Lesser General Public
   34 # License along with this program; if not, see <https://gnu.org/licenses/>.
   35 # SPDX-License-Identifier: LGPL-2.1-or-later
   36 VPATH = @srcdir@
   37 am__is_gnu_make = { \
   38   if test -z '$(MAKELEVEL)'; then \
   39     false; \
   40   elif test -n '$(MAKE_HOST)'; then \
   41     true; \
   42   elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
   43     true; \
   44   else \
   45     false; \
   46   fi; \
   47 }
   48 am__make_running_with_option = \
   49   case $${target_option-} in \
   50       ?) ;; \
   51       *) echo "am__make_running_with_option: internal error: invalid" \
   52               "target option '$${target_option-}' specified" >&2; \
   53          exit 1;; \
   54   esac; \
   55   has_opt=no; \
   56   sane_makeflags=$$MAKEFLAGS; \
   57   if $(am__is_gnu_make); then \
   58     sane_makeflags=$$MFLAGS; \
   59   else \
   60     case $$MAKEFLAGS in \
   61       *\\[\ \	]*) \
   62         bs=\\; \
   63         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
   64           | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
   65     esac; \
   66   fi; \
   67   skip_next=no; \
   68   strip_trailopt () \
   69   { \
   70     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
   71   }; \
   72   for flg in $$sane_makeflags; do \
   73     test $$skip_next = yes && { skip_next=no; continue; }; \
   74     case $$flg in \
   75       *=*|--*) continue;; \
   76         -*I) strip_trailopt 'I'; skip_next=yes;; \
   77       -*I?*) strip_trailopt 'I';; \
   78         -*O) strip_trailopt 'O'; skip_next=yes;; \
   79       -*O?*) strip_trailopt 'O';; \
   80         -*l) strip_trailopt 'l'; skip_next=yes;; \
   81       -*l?*) strip_trailopt 'l';; \
   82       -[dEDm]) skip_next=yes;; \
   83       -[JT]) skip_next=yes;; \
   84     esac; \
   85     case $$flg in \
   86       *$$target_option*) has_opt=yes; break;; \
   87     esac; \
   88   done; \
   89   test $$has_opt = yes
   90 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
   91 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
   92 pkgdatadir = $(datadir)/@PACKAGE@
   93 pkgincludedir = $(includedir)/@PACKAGE@
   94 pkglibdir = $(libdir)/@PACKAGE@
   95 pkglibexecdir = $(libexecdir)/@PACKAGE@
   96 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
   97 install_sh_DATA = $(install_sh) -c -m 644
   98 install_sh_PROGRAM = $(install_sh) -c
   99 install_sh_SCRIPT = $(install_sh) -c
  100 INSTALL_HEADER = $(INSTALL_DATA)
  101 transform = $(program_transform_name)
  102 NORMAL_INSTALL = :
  103 PRE_INSTALL = :
  104 POST_INSTALL = :
  105 NORMAL_UNINSTALL = :
  106 PRE_UNINSTALL = :
  107 POST_UNINSTALL = :
  108 build_triplet = @build@
  109 host_triplet = @host@
  110 subdir = .
  111 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  112 am__aclocal_m4_deps = $(top_srcdir)/m4/ax_cxx_compile_stdcxx.m4 \
  113 	$(top_srcdir)/m4/ax_pkg_swig.m4 \
  114 	$(top_srcdir)/m4/ax_python_devel.m4 \
  115 	$(top_srcdir)/m4/glib-2.0.m4 $(top_srcdir)/m4/glibc21.m4 \
  116 	$(top_srcdir)/m4/gnupg-ttyname.m4 \
  117 	$(top_srcdir)/m4/gpg-error.m4 $(top_srcdir)/m4/libassuan.m4 \
  118 	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
  119 	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
  120 	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \
  121 	$(top_srcdir)/m4/python.m4 $(top_srcdir)/m4/qt.m4 \
  122 	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
  123 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  124 	$(ACLOCAL_M4)
  125 DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
  126 	$(am__configure_deps) $(am__DIST_COMMON)
  127 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  128  configure.lineno config.status.lineno
  129 mkinstalldirs = $(SHELL) $(top_srcdir)/build-aux/mkinstalldirs
  130 CONFIG_HEADER = $(top_builddir)/conf/config.h
  131 CONFIG_CLEAN_FILES =
  132 CONFIG_CLEAN_VPATH_FILES =
  133 AM_V_P = $(am__v_P_@AM_V@)
  134 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
  135 am__v_P_0 = false
  136 am__v_P_1 = :
  137 AM_V_GEN = $(am__v_GEN_@AM_V@)
  138 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
  139 am__v_GEN_0 = @echo "  GEN     " $@;
  140 am__v_GEN_1 = 
  141 AM_V_at = $(am__v_at_@AM_V@)
  142 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
  143 am__v_at_0 = @
  144 am__v_at_1 = 
  145 SOURCES =
  146 DIST_SOURCES =
  147 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
  148 	ctags-recursive dvi-recursive html-recursive info-recursive \
  149 	install-data-recursive install-dvi-recursive \
  150 	install-exec-recursive install-html-recursive \
  151 	install-info-recursive install-pdf-recursive \
  152 	install-ps-recursive install-recursive installcheck-recursive \
  153 	installdirs-recursive pdf-recursive ps-recursive \
  154 	tags-recursive uninstall-recursive
  155 am__can_run_installinfo = \
  156   case $$AM_UPDATE_INFO_DIR in \
  157     n|no|NO) false;; \
  158     *) (install-info --version) >/dev/null 2>&1;; \
  159   esac
  160 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  161   distclean-recursive maintainer-clean-recursive
  162 am__recursive_targets = \
  163   $(RECURSIVE_TARGETS) \
  164   $(RECURSIVE_CLEAN_TARGETS) \
  165   $(am__extra_recursive_targets)
  166 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
  167 	cscope distdir distdir-am dist dist-all distcheck
  168 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
  169 # Read a list of newline-separated strings from the standard input,
  170 # and print each of them once, without duplicates.  Input order is
  171 # *not* preserved.
  172 am__uniquify_input = $(AWK) '\
  173   BEGIN { nonempty = 0; } \
  174   { items[$$0] = 1; nonempty = 1; } \
  175   END { if (nonempty) { for (i in items) print i; }; } \
  176 '
  177 # Make sure the list of sources is unique.  This is necessary because,
  178 # e.g., the same source file might be shared among _SOURCES variables
  179 # for different programs/libraries.
  180 am__define_uniq_tagged_files = \
  181   list='$(am__tagged_files)'; \
  182   unique=`for i in $$list; do \
  183     if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  184   done | $(am__uniquify_input)`
  185 ETAGS = etags
  186 CTAGS = ctags
  187 CSCOPE = cscope
  188 DIST_SUBDIRS = src tests doc lang
  189 am__DIST_COMMON = $(srcdir)/Makefile.in \
  190 	$(top_srcdir)/build-aux/compile \
  191 	$(top_srcdir)/build-aux/config.guess \
  192 	$(top_srcdir)/build-aux/config.sub \
  193 	$(top_srcdir)/build-aux/install-sh \
  194 	$(top_srcdir)/build-aux/ltmain.sh \
  195 	$(top_srcdir)/build-aux/missing \
  196 	$(top_srcdir)/build-aux/mkinstalldirs \
  197 	$(top_srcdir)/conf/config.h.in AUTHORS COPYING COPYING.LESSER \
  198 	ChangeLog INSTALL NEWS README THANKS TODO build-aux/compile \
  199 	build-aux/config.guess build-aux/config.sub build-aux/depcomp \
  200 	build-aux/install-sh build-aux/ltmain.sh build-aux/mdate-sh \
  201 	build-aux/missing build-aux/mkinstalldirs \
  202 	build-aux/texinfo.tex missing
  203 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
  204 distdir = $(PACKAGE)-$(VERSION)
  205 top_distdir = $(distdir)
  206 am__remove_distdir = \
  207   if test -d "$(distdir)"; then \
  208     find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
  209       && rm -rf "$(distdir)" \
  210       || { sleep 5 && rm -rf "$(distdir)"; }; \
  211   else :; fi
  212 am__post_remove_distdir = $(am__remove_distdir)
  213 am__relativize = \
  214   dir0=`pwd`; \
  215   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  216   sed_rest='s,^[^/]*/*,,'; \
  217   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  218   sed_butlast='s,/*[^/]*$$,,'; \
  219   while test -n "$$dir1"; do \
  220     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
  221     if test "$$first" != "."; then \
  222       if test "$$first" = ".."; then \
  223         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
  224         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
  225       else \
  226         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
  227         if test "$$first2" = "$$first"; then \
  228           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
  229         else \
  230           dir2="../$$dir2"; \
  231         fi; \
  232         dir0="$$dir0"/"$$first"; \
  233       fi; \
  234     fi; \
  235     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  236   done; \
  237   reldir="$$dir2"
  238 GZIP_ENV = --best
  239 DIST_ARCHIVES = $(distdir).tar.bz2
  240 DIST_TARGETS = dist-bzip2
  241 distuninstallcheck_listfiles = find . -type f -print
  242 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
  243   | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
  244 distcleancheck_listfiles = find . -type f -print
  245 ACLOCAL = @ACLOCAL@
  246 AMTAR = @AMTAR@
  247 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
  248 AR = @AR@
  249 AS = @AS@
  250 AUTOCONF = @AUTOCONF@
  251 AUTOHEADER = @AUTOHEADER@
  252 AUTOMAKE = @AUTOMAKE@
  253 AWK = @AWK@
  254 BUILD_FILEVERSION = @BUILD_FILEVERSION@
  255 BUILD_REVISION = @BUILD_REVISION@
  256 BUILD_TIMESTAMP = @BUILD_TIMESTAMP@
  257 BUILD_VERSION = @BUILD_VERSION@
  258 CC = @CC@
  259 CCDEPMODE = @CCDEPMODE@
  260 CC_FOR_BUILD = @CC_FOR_BUILD@
  261 CFLAGS = @CFLAGS@
  262 CPP = @CPP@
  263 CPPFLAGS = @CPPFLAGS@
  264 CXX = @CXX@
  265 CXXCPP = @CXXCPP@
  266 CXXDEPMODE = @CXXDEPMODE@
  267 CXXFLAGS = @CXXFLAGS@
  268 CYGPATH_W = @CYGPATH_W@
  269 DEFS = @DEFS@
  270 DEPDIR = @DEPDIR@
  271 DLLTOOL = @DLLTOOL@
  272 DOXYGEN = @DOXYGEN@
  273 DSYMUTIL = @DSYMUTIL@
  274 DUMPBIN = @DUMPBIN@
  275 ECHO_C = @ECHO_C@
  276 ECHO_N = @ECHO_N@
  277 ECHO_T = @ECHO_T@
  278 EGREP = @EGREP@
  279 ENABLED_LANGUAGES = @ENABLED_LANGUAGES@
  280 EXEEXT = @EXEEXT@
  281 FGREP = @FGREP@
  282 GITLOG_TO_CHANGELOG = @GITLOG_TO_CHANGELOG@
  283 GLIBC21 = @GLIBC21@
  284 GLIB_CFLAGS = @GLIB_CFLAGS@
  285 GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
  286 GLIB_LIBS = @GLIB_LIBS@
  287 GLIB_MKENUMS = @GLIB_MKENUMS@
  288 GOBJECT_QUERY = @GOBJECT_QUERY@
  289 GPGME_CONFIG_API_VERSION = @GPGME_CONFIG_API_VERSION@
  290 GPGME_CONFIG_AVAIL_LANG = @GPGME_CONFIG_AVAIL_LANG@
  291 GPGME_CONFIG_CFLAGS = @GPGME_CONFIG_CFLAGS@
  292 GPGME_CONFIG_HOST = @GPGME_CONFIG_HOST@
  293 GPGME_CONFIG_LIBS = @GPGME_CONFIG_LIBS@
  294 GPGME_QTTEST_CFLAGS = @GPGME_QTTEST_CFLAGS@
  295 GPGME_QTTEST_LIBS = @GPGME_QTTEST_LIBS@
  296 GPGME_QT_CFLAGS = @GPGME_QT_CFLAGS@
  297 GPGME_QT_LIBS = @GPGME_QT_LIBS@
  298 GPGRT_CONFIG = @GPGRT_CONFIG@
  299 GPG_ERROR_CFLAGS = @GPG_ERROR_CFLAGS@
  300 GPG_ERROR_CONFIG = @GPG_ERROR_CONFIG@
  301 GPG_ERROR_LIBS = @GPG_ERROR_LIBS@
  302 GPG_ERROR_MT_CFLAGS = @GPG_ERROR_MT_CFLAGS@
  303 GPG_ERROR_MT_LIBS = @GPG_ERROR_MT_LIBS@
  304 GRAPHVIZ = @GRAPHVIZ@
  305 GREP = @GREP@
  306 HAVE_CXX11 = @HAVE_CXX11@
  307 HAVE_DOT = @HAVE_DOT@
  308 INSTALL = @INSTALL@
  309 INSTALL_DATA = @INSTALL_DATA@
  310 INSTALL_PROGRAM = @INSTALL_PROGRAM@
  311 INSTALL_SCRIPT = @INSTALL_SCRIPT@
  312 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
  313 LD = @LD@
  314 LDADD_FOR_TESTS_KLUDGE = @LDADD_FOR_TESTS_KLUDGE@
  315 LDFLAGS = @LDFLAGS@
  316 LIBASSUAN_CFLAGS = @LIBASSUAN_CFLAGS@
  317 LIBASSUAN_CONFIG = @LIBASSUAN_CONFIG@
  318 LIBASSUAN_LIBS = @LIBASSUAN_LIBS@
  319 LIBGPGMEPP_LT_AGE = @LIBGPGMEPP_LT_AGE@
  320 LIBGPGMEPP_LT_CURRENT = @LIBGPGMEPP_LT_CURRENT@
  321 LIBGPGMEPP_LT_REVISION = @LIBGPGMEPP_LT_REVISION@
  322 LIBGPGME_LT_AGE = @LIBGPGME_LT_AGE@
  323 LIBGPGME_LT_CURRENT = @LIBGPGME_LT_CURRENT@
  324 LIBGPGME_LT_REVISION = @LIBGPGME_LT_REVISION@
  325 LIBOBJS = @LIBOBJS@
  326 LIBQGPGME_LT_AGE = @LIBQGPGME_LT_AGE@
  327 LIBQGPGME_LT_CURRENT = @LIBQGPGME_LT_CURRENT@
  328 LIBQGPGME_LT_REVISION = @LIBQGPGME_LT_REVISION@
  329 LIBS = @LIBS@
  330 LIBTOOL = @LIBTOOL@
  331 LIPO = @LIPO@
  332 LN_S = @LN_S@
  333 LTLIBOBJS = @LTLIBOBJS@
  334 MAINT = @MAINT@
  335 MAKEINFO = @MAKEINFO@
  336 MANIFEST_TOOL = @MANIFEST_TOOL@
  337 MKDIR_P = @MKDIR_P@
  338 MOC = @MOC@
  339 MOC2 = @MOC2@
  340 NEED__FILE_OFFSET_BITS = @NEED__FILE_OFFSET_BITS@
  341 NM = @NM@
  342 NMEDIT = @NMEDIT@
  343 OBJDUMP = @OBJDUMP@
  344 OBJEXT = @OBJEXT@
  345 OTOOL = @OTOOL@
  346 OTOOL64 = @OTOOL64@
  347 PACKAGE = @PACKAGE@
  348 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
  349 PACKAGE_NAME = @PACKAGE_NAME@
  350 PACKAGE_STRING = @PACKAGE_STRING@
  351 PACKAGE_TARNAME = @PACKAGE_TARNAME@
  352 PACKAGE_URL = @PACKAGE_URL@
  353 PACKAGE_VERSION = @PACKAGE_VERSION@
  354 PATH_SEPARATOR = @PATH_SEPARATOR@
  355 PKG_CONFIG = @PKG_CONFIG@
  356 PYTHON = @PYTHON@
  357 PYTHONS = @PYTHONS@
  358 PYTHON_CPPFLAGS = @PYTHON_CPPFLAGS@
  359 PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
  360 PYTHON_EXTRA_LDFLAGS = @PYTHON_EXTRA_LDFLAGS@
  361 PYTHON_EXTRA_LIBS = @PYTHON_EXTRA_LIBS@
  362 PYTHON_LDFLAGS = @PYTHON_LDFLAGS@
  363 PYTHON_PLATFORM = @PYTHON_PLATFORM@
  364 PYTHON_PREFIX = @PYTHON_PREFIX@
  365 PYTHON_SITE_PKG = @PYTHON_SITE_PKG@
  366 PYTHON_VERSION = @PYTHON_VERSION@
  367 QTCHOOSER = @QTCHOOSER@
  368 RANLIB = @RANLIB@
  369 RC = @RC@
  370 SED = @SED@
  371 SET_MAKE = @SET_MAKE@
  372 SHELL = @SHELL@
  373 STRIP = @STRIP@
  374 SWIG = @SWIG@
  375 SWIG_LIB = @SWIG_LIB@
  376 SYSROOT = @SYSROOT@
  377 VERSION = @VERSION@
  378 VERSION_MAJOR = @VERSION_MAJOR@
  379 VERSION_MICRO = @VERSION_MICRO@
  380 VERSION_MINOR = @VERSION_MINOR@
  381 VERSION_NUMBER = @VERSION_NUMBER@
  382 abs_builddir = @abs_builddir@
  383 abs_srcdir = @abs_srcdir@
  384 abs_top_builddir = @abs_top_builddir@
  385 abs_top_srcdir = @abs_top_srcdir@
  386 ac_ct_AR = @ac_ct_AR@
  387 ac_ct_CC = @ac_ct_CC@
  388 ac_ct_CXX = @ac_ct_CXX@
  389 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
  390 am__include = @am__include@
  391 am__leading_dot = @am__leading_dot@
  392 am__quote = @am__quote@
  393 am__tar = @am__tar@
  394 am__untar = @am__untar@
  395 bindir = @bindir@
  396 build = @build@
  397 build_alias = @build_alias@
  398 build_cpu = @build_cpu@
  399 build_os = @build_os@
  400 build_vendor = @build_vendor@
  401 builddir = @builddir@
  402 datadir = @datadir@
  403 datarootdir = @datarootdir@
  404 docdir = @docdir@
  405 dvidir = @dvidir@
  406 emacs_local_vars_begin = @emacs_local_vars_begin@
  407 emacs_local_vars_end = @emacs_local_vars_end@
  408 emacs_local_vars_read_only = @emacs_local_vars_read_only@
  409 exec_prefix = @exec_prefix@
  410 host = @host@
  411 host_alias = @host_alias@
  412 host_cpu = @host_cpu@
  413 host_os = @host_os@
  414 host_vendor = @host_vendor@
  415 htmldir = @htmldir@
  416 includedir = @includedir@
  417 infodir = @infodir@
  418 install_sh = @install_sh@
  419 libdir = @libdir@
  420 libexecdir = @libexecdir@
  421 localedir = @localedir@
  422 localstatedir = @localstatedir@
  423 mandir = @mandir@
  424 mkdir_p = @mkdir_p@
  425 oldincludedir = @oldincludedir@
  426 pdfdir = @pdfdir@
  427 pkgpyexecdir = @pkgpyexecdir@
  428 pkgpythondir = @pkgpythondir@
  429 prefix = @prefix@
  430 program_transform_name = @program_transform_name@
  431 psdir = @psdir@
  432 pyexecdir = @pyexecdir@
  433 pythondir = @pythondir@
  434 runstatedir = @runstatedir@
  435 sbindir = @sbindir@
  436 sharedstatedir = @sharedstatedir@
  437 srcdir = @srcdir@
  438 sysconfdir = @sysconfdir@
  439 target_alias = @target_alias@
  440 top_build_prefix = @top_build_prefix@
  441 top_builddir = @top_builddir@
  442 top_srcdir = @top_srcdir@
  443 
  444 # Location of the released tarball archives.  This is prefixed by
  445 # the variable RELEASE_ARCHIVE in ~/.gnupg-autogen.rc.  For example:
  446 # RELEASE_ARCHIVE=user@host:archive/tarballs
  447 RELEASE_ARCHIVE_SUFFIX = gpgme
  448 # The variable RELEASE_SIGNKEY in ~/.gnupg-autogen.rc is used
  449 # to specify the key for signing.  For example:
  450 # RELEASE_SIGNKEY=D8692123C4065DEA5E0F3AB5249B39D24F25E3B6
  451 
  452 # Autoconf flags
  453 ACLOCAL_AMFLAGS = -I m4
  454 DISTCHECK_CONFIGURE_FLAGS = 
  455 EXTRA_DIST = autogen.sh autogen.rc gpgme.spec.in  \
  456              ChangeLog-2011 m4/ChangeLog-2011     \
  457              conf/whatisthis VERSION
  458 
  459 @RUN_GPG_TESTS_FALSE@tests = 
  460 @RUN_GPG_TESTS_TRUE@tests = tests
  461 SUBDIRS = src ${tests} doc lang
  462 gen_start_date = 2011-12-01T00:00:00
  463 
  464 # Macro to help the release target.
  465 RELEASE_NAME = $(PACKAGE_TARNAME)-$(PACKAGE_VERSION)
  466 all: all-recursive
  467 
  468 .SUFFIXES:
  469 am--refresh: Makefile
  470 	@:
  471 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
  472 	@for dep in $?; do \
  473 	  case '$(am__configure_deps)' in \
  474 	    *$$dep*) \
  475 	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
  476 	      $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
  477 		&& exit 0; \
  478 	      exit 1;; \
  479 	  esac; \
  480 	done; \
  481 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
  482 	$(am__cd) $(top_srcdir) && \
  483 	  $(AUTOMAKE) --gnu Makefile
  484 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
  485 	@case '$?' in \
  486 	  *config.status*) \
  487 	    echo ' $(SHELL) ./config.status'; \
  488 	    $(SHELL) ./config.status;; \
  489 	  *) \
  490 	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
  491 	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
  492 	esac;
  493 
  494 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
  495 	$(SHELL) ./config.status --recheck
  496 
  497 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
  498 	$(am__cd) $(srcdir) && $(AUTOCONF)
  499 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
  500 	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
  501 $(am__aclocal_m4_deps):
  502 
  503 conf/config.h: conf/stamp-h1
  504 	@test -f $@ || rm -f conf/stamp-h1
  505 	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) conf/stamp-h1
  506 
  507 conf/stamp-h1: $(top_srcdir)/conf/config.h.in $(top_builddir)/config.status
  508 	@rm -f conf/stamp-h1
  509 	cd $(top_builddir) && $(SHELL) ./config.status conf/config.h
  510 $(top_srcdir)/conf/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
  511 	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
  512 	rm -f conf/stamp-h1
  513 	touch $@
  514 
  515 distclean-hdr:
  516 	-rm -f conf/config.h conf/stamp-h1
  517 
  518 mostlyclean-libtool:
  519 	-rm -f *.lo
  520 
  521 clean-libtool:
  522 	-rm -rf .libs _libs
  523 
  524 distclean-libtool:
  525 	-rm -f libtool config.lt
  526 
  527 # This directory's subdirectories are mostly independent; you can cd
  528 # into them and run 'make' without going through this Makefile.
  529 # To change the values of 'make' variables: instead of editing Makefiles,
  530 # (1) if the variable is set in 'config.status', edit 'config.status'
  531 #     (which will cause the Makefiles to be regenerated when you run 'make');
  532 # (2) otherwise, pass the desired values on the 'make' command line.
  533 $(am__recursive_targets):
  534 	@fail=; \
  535 	if $(am__make_keepgoing); then \
  536 	  failcom='fail=yes'; \
  537 	else \
  538 	  failcom='exit 1'; \
  539 	fi; \
  540 	dot_seen=no; \
  541 	target=`echo $@ | sed s/-recursive//`; \
  542 	case "$@" in \
  543 	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
  544 	  *) list='$(SUBDIRS)' ;; \
  545 	esac; \
  546 	for subdir in $$list; do \
  547 	  echo "Making $$target in $$subdir"; \
  548 	  if test "$$subdir" = "."; then \
  549 	    dot_seen=yes; \
  550 	    local_target="$$target-am"; \
  551 	  else \
  552 	    local_target="$$target"; \
  553 	  fi; \
  554 	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
  555 	  || eval $$failcom; \
  556 	done; \
  557 	if test "$$dot_seen" = "no"; then \
  558 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
  559 	fi; test -z "$$fail"
  560 
  561 ID: $(am__tagged_files)
  562 	$(am__define_uniq_tagged_files); mkid -fID $$unique
  563 tags: tags-recursive
  564 TAGS: tags
  565 
  566 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
  567 	set x; \
  568 	here=`pwd`; \
  569 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
  570 	  include_option=--etags-include; \
  571 	  empty_fix=.; \
  572 	else \
  573 	  include_option=--include; \
  574 	  empty_fix=; \
  575 	fi; \
  576 	list='$(SUBDIRS)'; for subdir in $$list; do \
  577 	  if test "$$subdir" = .; then :; else \
  578 	    test ! -f $$subdir/TAGS || \
  579 	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
  580 	  fi; \
  581 	done; \
  582 	$(am__define_uniq_tagged_files); \
  583 	shift; \
  584 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
  585 	  test -n "$$unique" || unique=$$empty_fix; \
  586 	  if test $$# -gt 0; then \
  587 	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
  588 	      "$$@" $$unique; \
  589 	  else \
  590 	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
  591 	      $$unique; \
  592 	  fi; \
  593 	fi
  594 ctags: ctags-recursive
  595 
  596 CTAGS: ctags
  597 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
  598 	$(am__define_uniq_tagged_files); \
  599 	test -z "$(CTAGS_ARGS)$$unique" \
  600 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
  601 	     $$unique
  602 
  603 GTAGS:
  604 	here=`$(am__cd) $(top_builddir) && pwd` \
  605 	  && $(am__cd) $(top_srcdir) \
  606 	  && gtags -i $(GTAGS_ARGS) "$$here"
  607 cscope: cscope.files
  608 	test ! -s cscope.files \
  609 	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
  610 clean-cscope:
  611 	-rm -f cscope.files
  612 cscope.files: clean-cscope cscopelist
  613 cscopelist: cscopelist-recursive
  614 
  615 cscopelist-am: $(am__tagged_files)
  616 	list='$(am__tagged_files)'; \
  617 	case "$(srcdir)" in \
  618 	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
  619 	  *) sdir=$(subdir)/$(srcdir) ;; \
  620 	esac; \
  621 	for i in $$list; do \
  622 	  if test -f "$$i"; then \
  623 	    echo "$(subdir)/$$i"; \
  624 	  else \
  625 	    echo "$$sdir/$$i"; \
  626 	  fi; \
  627 	done >> $(top_builddir)/cscope.files
  628 
  629 distclean-tags:
  630 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
  631 	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
  632 
  633 distdir: $(BUILT_SOURCES)
  634 	$(MAKE) $(AM_MAKEFLAGS) distdir-am
  635 
  636 distdir-am: $(DISTFILES)
  637 	$(am__remove_distdir)
  638 	test -d "$(distdir)" || mkdir "$(distdir)"
  639 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
  640 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
  641 	list='$(DISTFILES)'; \
  642 	  dist_files=`for file in $$list; do echo $$file; done | \
  643 	  sed -e "s|^$$srcdirstrip/||;t" \
  644 	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
  645 	case $$dist_files in \
  646 	  */*) $(MKDIR_P) `echo "$$dist_files" | \
  647 			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
  648 			   sort -u` ;; \
  649 	esac; \
  650 	for file in $$dist_files; do \
  651 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
  652 	  if test -d $$d/$$file; then \
  653 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
  654 	    if test -d "$(distdir)/$$file"; then \
  655 	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
  656 	    fi; \
  657 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
  658 	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
  659 	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
  660 	    fi; \
  661 	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
  662 	  else \
  663 	    test -f "$(distdir)/$$file" \
  664 	    || cp -p $$d/$$file "$(distdir)/$$file" \
  665 	    || exit 1; \
  666 	  fi; \
  667 	done
  668 	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
  669 	  if test "$$subdir" = .; then :; else \
  670 	    $(am__make_dryrun) \
  671 	      || test -d "$(distdir)/$$subdir" \
  672 	      || $(MKDIR_P) "$(distdir)/$$subdir" \
  673 	      || exit 1; \
  674 	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
  675 	    $(am__relativize); \
  676 	    new_distdir=$$reldir; \
  677 	    dir1=$$subdir; dir2="$(top_distdir)"; \
  678 	    $(am__relativize); \
  679 	    new_top_distdir=$$reldir; \
  680 	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
  681 	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
  682 	    ($(am__cd) $$subdir && \
  683 	      $(MAKE) $(AM_MAKEFLAGS) \
  684 	        top_distdir="$$new_top_distdir" \
  685 	        distdir="$$new_distdir" \
  686 		am__remove_distdir=: \
  687 		am__skip_length_check=: \
  688 		am__skip_mode_fix=: \
  689 	        distdir) \
  690 	      || exit 1; \
  691 	  fi; \
  692 	done
  693 	$(MAKE) $(AM_MAKEFLAGS) \
  694 	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
  695 	  dist-hook
  696 	-test -n "$(am__skip_mode_fix)" \
  697 	|| find "$(distdir)" -type d ! -perm -755 \
  698 		-exec chmod u+rwx,go+rx {} \; -o \
  699 	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
  700 	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
  701 	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
  702 	|| chmod -R a+r "$(distdir)"
  703 dist-gzip: distdir
  704 	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
  705 	$(am__post_remove_distdir)
  706 dist-bzip2: distdir
  707 	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
  708 	$(am__post_remove_distdir)
  709 
  710 dist-lzip: distdir
  711 	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
  712 	$(am__post_remove_distdir)
  713 
  714 dist-xz: distdir
  715 	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
  716 	$(am__post_remove_distdir)
  717 
  718 dist-tarZ: distdir
  719 	@echo WARNING: "Support for distribution archives compressed with" \
  720 		       "legacy program 'compress' is deprecated." >&2
  721 	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
  722 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
  723 	$(am__post_remove_distdir)
  724 
  725 dist-shar: distdir
  726 	@echo WARNING: "Support for shar distribution archives is" \
  727 	               "deprecated." >&2
  728 	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
  729 	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
  730 	$(am__post_remove_distdir)
  731 
  732 dist-zip: distdir
  733 	-rm -f $(distdir).zip
  734 	zip -rq $(distdir).zip $(distdir)
  735 	$(am__post_remove_distdir)
  736 
  737 dist dist-all:
  738 	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
  739 	$(am__post_remove_distdir)
  740 
  741 # This target untars the dist file and tries a VPATH configuration.  Then
  742 # it guarantees that the distribution is self-contained by making another
  743 # tarfile.
  744 distcheck: dist
  745 	case '$(DIST_ARCHIVES)' in \
  746 	*.tar.gz*) \
  747 	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
  748 	*.tar.bz2*) \
  749 	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
  750 	*.tar.lz*) \
  751 	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
  752 	*.tar.xz*) \
  753 	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
  754 	*.tar.Z*) \
  755 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
  756 	*.shar.gz*) \
  757 	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
  758 	*.zip*) \
  759 	  unzip $(distdir).zip ;;\
  760 	esac
  761 	chmod -R a-w $(distdir)
  762 	chmod u+w $(distdir)
  763 	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
  764 	chmod a-w $(distdir)
  765 	test -d $(distdir)/_build || exit 0; \
  766 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
  767 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
  768 	  && $(MAKE) $(AM_MAKEFLAGS) distcheck-hook \
  769 	  && am__cwd=`pwd` \
  770 	  && $(am__cd) $(distdir)/_build/sub \
  771 	  && ../../configure \
  772 	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
  773 	    $(DISTCHECK_CONFIGURE_FLAGS) \
  774 	    --srcdir=../.. --prefix="$$dc_install_base" \
  775 	  && $(MAKE) $(AM_MAKEFLAGS) \
  776 	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
  777 	  && $(MAKE) $(AM_MAKEFLAGS) check \
  778 	  && $(MAKE) $(AM_MAKEFLAGS) install \
  779 	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
  780 	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
  781 	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
  782 	        distuninstallcheck \
  783 	  && chmod -R a-w "$$dc_install_base" \
  784 	  && ({ \
  785 	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
  786 	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
  787 	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
  788 	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
  789 	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
  790 	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
  791 	  && rm -rf "$$dc_destdir" \
  792 	  && $(MAKE) $(AM_MAKEFLAGS) dist \
  793 	  && rm -rf $(DIST_ARCHIVES) \
  794 	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
  795 	  && cd "$$am__cwd" \
  796 	  || exit 1
  797 	$(am__post_remove_distdir)
  798 	@(echo "$(distdir) archives ready for distribution: "; \
  799 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
  800 	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
  801 distuninstallcheck:
  802 	@test -n '$(distuninstallcheck_dir)' || { \
  803 	  echo 'ERROR: trying to run $@ with an empty' \
  804 	       '$$(distuninstallcheck_dir)' >&2; \
  805 	  exit 1; \
  806 	}; \
  807 	$(am__cd) '$(distuninstallcheck_dir)' || { \
  808 	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
  809 	  exit 1; \
  810 	}; \
  811 	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
  812 	   || { echo "ERROR: files left after uninstall:" ; \
  813 	        if test -n "$(DESTDIR)"; then \
  814 	          echo "  (check DESTDIR support)"; \
  815 	        fi ; \
  816 	        $(distuninstallcheck_listfiles) ; \
  817 	        exit 1; } >&2
  818 distcleancheck: distclean
  819 	@if test '$(srcdir)' = . ; then \
  820 	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
  821 	  exit 1 ; \
  822 	fi
  823 	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
  824 	  || { echo "ERROR: files left in build directory after distclean:" ; \
  825 	       $(distcleancheck_listfiles) ; \
  826 	       exit 1; } >&2
  827 check-am: all-am
  828 check: check-recursive
  829 all-am: Makefile
  830 installdirs: installdirs-recursive
  831 installdirs-am:
  832 install: install-recursive
  833 install-exec: install-exec-recursive
  834 install-data: install-data-recursive
  835 uninstall: uninstall-recursive
  836 
  837 install-am: all-am
  838 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
  839 
  840 installcheck: installcheck-recursive
  841 install-strip:
  842 	if test -z '$(STRIP)'; then \
  843 	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
  844 	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
  845 	      install; \
  846 	else \
  847 	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
  848 	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
  849 	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
  850 	fi
  851 mostlyclean-generic:
  852 
  853 clean-generic:
  854 
  855 distclean-generic:
  856 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
  857 	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
  858 
  859 maintainer-clean-generic:
  860 	@echo "This command is intended for maintainers to use"
  861 	@echo "it deletes files that may require special tools to rebuild."
  862 clean: clean-recursive
  863 
  864 clean-am: clean-generic clean-libtool mostlyclean-am
  865 
  866 distclean: distclean-recursive
  867 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
  868 	-rm -f Makefile
  869 distclean-am: clean-am distclean-generic distclean-hdr \
  870 	distclean-libtool distclean-tags
  871 
  872 dvi: dvi-recursive
  873 
  874 dvi-am:
  875 
  876 html: html-recursive
  877 
  878 html-am:
  879 
  880 info: info-recursive
  881 
  882 info-am:
  883 
  884 install-data-am:
  885 
  886 install-dvi: install-dvi-recursive
  887 
  888 install-dvi-am:
  889 
  890 install-exec-am:
  891 
  892 install-html: install-html-recursive
  893 
  894 install-html-am:
  895 
  896 install-info: install-info-recursive
  897 
  898 install-info-am:
  899 
  900 install-man:
  901 
  902 install-pdf: install-pdf-recursive
  903 
  904 install-pdf-am:
  905 
  906 install-ps: install-ps-recursive
  907 
  908 install-ps-am:
  909 
  910 installcheck-am:
  911 
  912 maintainer-clean: maintainer-clean-recursive
  913 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
  914 	-rm -rf $(top_srcdir)/autom4te.cache
  915 	-rm -f Makefile
  916 maintainer-clean-am: distclean-am maintainer-clean-generic
  917 
  918 mostlyclean: mostlyclean-recursive
  919 
  920 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
  921 
  922 pdf: pdf-recursive
  923 
  924 pdf-am:
  925 
  926 ps: ps-recursive
  927 
  928 ps-am:
  929 
  930 uninstall-am:
  931 
  932 .MAKE: $(am__recursive_targets) install-am install-strip
  933 
  934 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
  935 	am--refresh check check-am clean clean-cscope clean-generic \
  936 	clean-libtool cscope cscopelist-am ctags ctags-am dist \
  937 	dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
  938 	dist-tarZ dist-xz dist-zip distcheck distclean \
  939 	distclean-generic distclean-hdr distclean-libtool \
  940 	distclean-tags distcleancheck distdir distuninstallcheck dvi \
  941 	dvi-am html html-am info info-am install install-am \
  942 	install-data install-data-am install-dvi install-dvi-am \
  943 	install-exec install-exec-am install-html install-html-am \
  944 	install-info install-info-am install-man install-pdf \
  945 	install-pdf-am install-ps install-ps-am install-strip \
  946 	installcheck installcheck-am installdirs installdirs-am \
  947 	maintainer-clean maintainer-clean-generic mostlyclean \
  948 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
  949 	tags tags-am uninstall uninstall-am
  950 
  951 .PRECIOUS: Makefile
  952 
  953 
  954 # Fix the version of the spec file.
  955 dist-hook: gen-ChangeLog
  956 	@set -e; \
  957 	sed -e 's/@pkg_version@/$(PACKAGE_VERSION)/g' \
  958 	    $(top_srcdir)/gpgme.spec.in  > $(distdir)/gpgme.spec
  959 
  960 distcheck-hook:
  961 	set -e; ( \
  962 	pref="#+macro: gpgme_" ;\
  963 	reldate="$$(date -u +%Y-%m-%d)" ;\
  964         echo "$${pref}ver  $(PACKAGE_VERSION)"  ;\
  965         echo "$${pref}date $${reldate}" ;\
  966         list='$(DIST_ARCHIVES)'; for i in $$list; do \
  967 	  case "$$i" in *.tar.bz2) \
  968             echo "$${pref}size $$(wc -c <$$i|awk '{print int($$1/1024)}')k" ;\
  969 	    echo "$${pref}sha1 $$(sha1sum <$$i|cut -d' ' -f1)" ;\
  970 	    echo "$${pref}sha2 $$(sha256sum <$$i|cut -d' ' -f1)" ;;\
  971 	  esac;\
  972 	done ) | tee $(distdir).swdb
  973 
  974 .PHONY: gen-ChangeLog release sign-release
  975 gen-ChangeLog:
  976 	if test -d $(top_srcdir)/.git; then				\
  977 	  (cd $(top_srcdir) &&                      			\
  978 	    $(GITLOG_TO_CHANGELOG) --append-dot --tear-off		\
  979 	    --amend=build-aux/git-log-fix				\
  980 	    --since=$(gen_start_date) ) > $(distdir)/cl-t;		\
  981           cat $(top_srcdir)/build-aux/git-log-footer >> $(distdir)/cl-t;\
  982 	  rm -f $(distdir)/ChangeLog;					\
  983 	  mv $(distdir)/cl-t $(distdir)/ChangeLog;			\
  984 	fi
  985 
  986 release:
  987 	+(set -e;\
  988 	 if [ "$(abs_top_builddir)" = "$(abs_top_srcdir)" ]; then \
  989            echo "error: build directory must not be the source directory" >&2;\
  990 	   exit 2;\
  991          fi ;\
  992 	 echo "/* Build started at $$(date -uIseconds) */" ;\
  993 	 cd $(top_srcdir); \
  994 	 ./autogen.sh --force; \
  995 	 cd $(abs_top_builddir); \
  996 	 rm -rf dist; mkdir dist ; cd dist ; \
  997 	 $(abs_top_srcdir)/configure --enable-maintainer-mode; \
  998 	 $(MAKE) distcheck; \
  999 	 echo "/* Build finished at $$(date -uIseconds) */" ;\
 1000          echo "/*" ;\
 1001 	 echo " * Please run the final step interactively:" ;\
 1002 	 echo " *   make sign-release" ;\
 1003 	 echo " */" ;\
 1004 	) 2>&1 | tee "$(RELEASE_NAME).buildlog"
 1005 
 1006 sign-release:
 1007 	 +(set -e; \
 1008 	  cd dist; \
 1009 	  x=$$(grep '^RELEASE_ARCHIVE=' $$HOME/.gnupg-autogen.rc|cut -d= -f2);\
 1010           if [ -z "$$x" ]; then \
 1011              echo "error: RELEASE_ARCHIVE missing in ~/.gnupg-autogen.rc">&2; \
 1012              exit 2;\
 1013           fi;\
 1014           myarchive="$$x/$(RELEASE_ARCHIVE_SUFFIX)";\
 1015 	  x=$$(grep '^RELEASE_SIGNKEY=' $$HOME/.gnupg-autogen.rc|cut -d= -f2);\
 1016           if [ -z "$$x" ]; then \
 1017              echo "error: RELEASE_SIGNKEY missing in ~/.gnupg-autogen.rc">&2; \
 1018              exit 2;\
 1019           fi;\
 1020 	  mysignkey="$$x";\
 1021 	  files1="$(RELEASE_NAME).tar.bz2" ;\
 1022 	  files2="$(RELEASE_NAME).tar.bz2.sig \
 1023 		  $(RELEASE_NAME).swdb \
 1024 		  $(RELEASE_NAME).buildlog" ;\
 1025 	  echo "/* Signing the source tarball ..." ;\
 1026 	  gpg -sbu $$mysignkey $(RELEASE_NAME).tar.bz2 ;\
 1027 	  cat $(RELEASE_NAME).swdb >swdb.snippet;\
 1028 	  echo >>swdb.snippet ;\
 1029 	  sha1sum $${files1} >>swdb.snippet ;\
 1030           cat "../$(RELEASE_NAME).buildlog" swdb.snippet \
 1031                | gzip >$(RELEASE_NAME).buildlog ;\
 1032           echo "Copying to local archive ..." ;\
 1033 	  scp -p $${files1} $${files2} $$myarchive/ || true;\
 1034           echo "Uploading documentation ..." ;\
 1035 	  $(MAKE) -C doc online; \
 1036 	  echo '/*' ;\
 1037 	  echo ' * All done; for checksums see dist/swdb.snippet' ;\
 1038 	  echo ' */' ;\
 1039          )
 1040 
 1041 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 1042 # Otherwise a system limit (for SysV at least) may be exceeded.
 1043 .NOEXPORT: