"Fossies" - the Fresh Open Source Software Archive

Member "netxms-3.4.232/contrib/mibs/AIRESPACE-SWITCHING-MIB.txt" (6 Jul 2020, 150335 Bytes) of package /linux/misc/netxms-3.4.232.tar.gz:


As a special service "Fossies" has tried to format the requested text file into HTML format (style: standard) with prefixed line numbers. Alternatively you can here view or download the uninterpreted source code file. For more information about "AIRESPACE-SWITCHING-MIB.txt" see the Fossies "Dox" file reference documentation.

    1 -- *******************************************************************
    2 -- Airespace Switching MIB
    3 -- Copyright 2001 Airespace, Inc.  All rights reserved.
    4 
    5 -- This SNMP Management Information Specification
    6 -- embodies Airespace's confidential and proprietary
    7 -- intellectual property.  LVL7 Systems retains all title
    8 -- and ownership in the Specification including any revisions.
    9 
   10 -- This Specification is supplied "AS IS", Airespace
   11 -- makes no warranty, either expressed or implied,
   12 -- as to the use, operation, condition, or performance of the
   13 -- Specification.
   14 
   15 
   16 -- Status: Release
   17 -- Version: 3.2
   18 -- Internal Source Code Version:1.75
   19 -- Date: 19 Dec 2005
   20 -- *******************************************************************
   21 
   22 
   23 AIRESPACE-SWITCHING-MIB DEFINITIONS ::= BEGIN
   24 
   25 IMPORTS
   26     MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress,
   27     Counter32, Integer32, Unsigned32, TimeTicks
   28                                         FROM SNMPv2-SMI
   29     MODULE-COMPLIANCE, OBJECT-GROUP,
   30     NOTIFICATION-GROUP                  FROM SNMPv2-CONF
   31     DisplayString, PhysAddress,           
   32     RowStatus, MacAddress, TruthValue   FROM SNMPv2-TC
   33     airespace                           FROM AIRESPACE-REF-MIB
   34     dot1qVlanIndex, dot1qFdbId          FROM Q-BRIDGE-MIB
   35     IANAifType                          FROM IANAifType-MIB;
   36 
   37 --********************************************************************
   38 --*  MODULE IDENTITY
   39 --********************************************************************
   40 
   41      bsnSwitching MODULE-IDENTITY
   42         LAST-UPDATED "200604100000Z"
   43         ORGANIZATION "Airespace, Inc."
   44         CONTACT-INFO
   45             "        Cisco Systems,
   46                      Customer Service
   47              Postal: 170 West Tasman Drive
   48                      San Jose, CA  95134
   49                      USA
   50                 Tel: +1 800 553-NETS
   51 
   52               Email: cs-wnbu-snmp@cisco.com"
   53         DESCRIPTION             
   54                 "This MIB is intended to be implemented on all those
   55                 devices operating as Central Controllers (CC) that
   56                 terminate the Light Weight Access Point Protocol
   57                 tunnel from Light-weight LWAPP Access Points.
   58 
   59                 This MIB provides configuration, statistics and 
   60                 status information about the controller. 
   61                 This includes controller statistics and provides 
   62                 information such as Inventory, Trap logs, memory and 
   63                 CPU. This MIB also provides configuration of CLI, 
   64                 SNMP, LAG, DHCP, Spanning Tree, etc. 
   65                 
   66                 The relationship between controller and the LWAPP APs
   67                 can be depicted as follows:
   68 
   69         +......+     +......+     +......+           +......+
   70         +      +     +      +     +      +           +      +
   71         +  CC  +     +  CC  +     +  CC  +           +  CC  +
   72         +      +     +      +     +      +           +      +
   73         +......+     +......+     +......+           +......+
   74           ..            .             .                 .
   75           ..            .             .                 .
   76          .  .            .             .                 .
   77         .    .            .             .                 .
   78        .      .            .             .                 .
   79       .        .            .             .                 .
   80    +......+ +......+     +......+      +......+          +......+
   81    +      + +      +     +      +      +      +          +      +
   82    +  AP  + +  AP  +     +  AP  +      +  AP  +          +  AP  +
   83    +      + +      +     +      +      +      +          +      +
   84    +......+ +......+     +......+      +......+          +......+
   85               .              .             .                 .
   86             .  .              .             .                 .
   87            .    .              .             .                 .
   88           .      .              .             .                 .
   89          .        .              .             .                 .
   90       +......+ +......+     +......+      +......+          +......+
   91       +      + +      +     +      +      +      +          +      +
   92       +  MN  + +  MN  +     +  MN  +      +  MN  +          +  MN  +
   93       +      + +      +     +      +      +      +          +      +
   94       +......+ +......+     +......+      +......+          +......+
   95 
   96 
   97                 The LWAPP tunnel exists between the controller and
   98                 the APs.  The MNs communicate with the APs through
   99                 the protocol defined by the 802.11 standard.
  100 
  101                 LWAPP APs, upon bootup, discover and join one of the
  102                 controllers and the controller pushes the configuration,
  103                 that includes the WLAN parameters, to the LWAPP APs.
  104                 The APs then encapsulate all the 802.11 frames from
  105                 wireless clients inside LWAPP frames and forward
  106                 the LWAPP frames to the controller.
  107                
  108                                    GLOSSARY
  109  
  110                 Access Point ( AP )
  111 
  112                 An entity that contains an 802.11 medium access
  113                 control ( MAC ) and physical layer ( PHY ) interface
  114                 and provides access to the distribution services via
  115                 the wireless medium for associated clients.  
  116 
  117                 LWAPP APs encapsulate all the 802.11 frames in
  118                 LWAPP frames and sends it to the controller to which
  119                 it is logically connected.
  120 
  121                 Basic Service Set Identifier (BSSID)
  122 
  123                 The identifier for the service set comprising of
  124                 all the 802.11 stations under the control of
  125                 one coordinating Access Point.  This identifier
  126                 happens to be the MAC address of the dot11 radio
  127                 interface of the Access Point.  The wireless
  128                 clients that associate with the Access Point
  129                 get the wired uplink through this particular 
  130                 dot11 interface. 
  131 
  132                 Central Controller ( CC )
  133 
  134                 The central entity that terminates the LWAPP protocol
  135                 tunnel from the LWAPP APs.  Throughout this MIB,
  136                 this entity also referred to as 'controller'. 
  137 
  138                 Light Weight Access Point Protocol ( LWAPP ) 
  139 
  140                 This is a generic protocol that defines the 
  141                 communication between the Access Points and the
  142                 Central Controller. 
  143 
  144                 Mobile Node ( MN )
  145 
  146                 A roaming 802.11 wireless device in a wireless
  147                 network associated with an access point. 
  148 
  149                 Station Management (SMT)
  150 
  151                 This term refers to the internal management of the
  152                 802.11 protocol operations by the AP to work
  153                 cooperatively with the other APs and 802.11
  154                 devices in the network.
  155  
  156                 REFERENCE
  157  
  158                 [1] Part 11 Wireless LAN Medium Access Control ( MAC )
  159                 and Physical Layer ( PHY ) Specifications.
  160   
  161                 [2] Draft-obara-capwap-lwapp-00.txt, IETF Light 
  162                 Weight Access Point Protocol. "
  163 
  164         REVISION    "200604100000Z"
  165 
  166         DESCRIPTION
  167                    "Updated MIB with description and format"
  168 
  169       ::= { airespace 1 }
  170 
  171 --********************************************************************
  172 --    Major sections
  173 --********************************************************************
  174 
  175     agentInfoGroup           OBJECT IDENTIFIER ::= { bsnSwitching 1 }
  176     agentConfigGroup         OBJECT IDENTIFIER ::= { bsnSwitching 2 }
  177     agentSystemGroup         OBJECT IDENTIFIER ::= { bsnSwitching 3 }
  178     stats                    OBJECT IDENTIFIER ::= { bsnSwitching 4 }
  179     switchingTraps           OBJECT IDENTIFIER ::= { bsnSwitching 50 }
  180     bsnSwitchingGroups       OBJECT IDENTIFIER ::= { bsnSwitching 51 }
  181     bsnSwitchingCompliances  OBJECT IDENTIFIER ::= { bsnSwitching 52 }
  182 
  183 
  184 --********************************************************************
  185 -- agentInventoryGroup
  186 --********************************************************************
  187 
  188 
  189     agentInventoryGroup     OBJECT IDENTIFIER ::= { agentInfoGroup 1 }
  190 
  191 
  192     agentInventorySysDescription OBJECT-TYPE
  193          SYNTAX      DisplayString
  194          MAX-ACCESS  read-only
  195          STATUS      current
  196          DESCRIPTION
  197                      "The switch's Inventory system description."
  198          ::= { agentInventoryGroup 1 }
  199 
  200     agentInventoryMachineType OBJECT-TYPE
  201          SYNTAX      DisplayString
  202          MAX-ACCESS  read-only
  203          STATUS      current
  204          DESCRIPTION
  205                      "Type of the Machine used in the Switch."
  206          ::= { agentInventoryGroup 2 }
  207 
  208     agentInventoryMachineModel OBJECT-TYPE
  209          SYNTAX      DisplayString
  210          MAX-ACCESS  read-only
  211          STATUS      current
  212          DESCRIPTION
  213                      "The switch's Machine Model. "
  214          ::= { agentInventoryGroup 3 }
  215 
  216     agentInventorySerialNumber OBJECT-TYPE
  217          SYNTAX      DisplayString
  218          MAX-ACCESS  read-only
  219          STATUS      current
  220          DESCRIPTION
  221                      "Serial number of the switch."
  222          ::= { agentInventoryGroup 4 }
  223 
  224 
  225     agentInventoryMaintenanceLevel OBJECT-TYPE
  226          SYNTAX      DisplayString
  227          MAX-ACCESS  read-only
  228          STATUS      current
  229          DESCRIPTION
  230                      "The switch's Inventory Maintenance Level"
  231          ::= { agentInventoryGroup 6 }
  232 
  233 
  234     agentInventoryBurnedInMacAddress OBJECT-TYPE
  235          SYNTAX      PhysAddress
  236          MAX-ACCESS  read-only
  237          STATUS      current
  238          DESCRIPTION
  239                      "Burned-In MAC Address"
  240 
  241          ::= { agentInventoryGroup 9 }
  242 
  243     agentInventoryOperatingSystem OBJECT-TYPE
  244          SYNTAX      DisplayString
  245          MAX-ACCESS  read-only
  246          STATUS      current
  247          DESCRIPTION
  248                      "Operating System running on this unit"
  249          ::= { agentInventoryGroup 10 }
  250 
  251     agentInventoryManufacturerName OBJECT-TYPE
  252          SYNTAX      DisplayString
  253          MAX-ACCESS  read-only
  254          STATUS      current
  255          DESCRIPTION
  256                      "Name of the switch manufacturer."
  257          ::= { agentInventoryGroup 12 }
  258 
  259     agentInventoryProductName OBJECT-TYPE
  260          SYNTAX      DisplayString
  261          MAX-ACCESS  read-only
  262          STATUS      current
  263          DESCRIPTION
  264                      "Name of the product."
  265          ::= { agentInventoryGroup 13 }
  266 
  267     agentInventoryProductVersion OBJECT-TYPE
  268          SYNTAX      DisplayString
  269          MAX-ACCESS  read-only
  270          STATUS      current
  271          DESCRIPTION
  272                     "Version of the product."
  273          ::= { agentInventoryGroup 14 }
  274 
  275     agentInventoryIsGigECardPresent OBJECT-TYPE
  276          SYNTAX      TruthValue
  277          MAX-ACCESS  read-only
  278          STATUS      current
  279          DESCRIPTION
  280                     "True if the Switch contains a Gigabit ethernet
  281                     card
  282                     ."
  283          ::= { agentInventoryGroup 15 }
  284 
  285      agentInventoryIsCryptoCardPresent OBJECT-TYPE
  286          SYNTAX      TruthValue
  287          MAX-ACCESS  read-only
  288          STATUS      current
  289          DESCRIPTION
  290                     "True if the switch is carrying a Crypto card."
  291          ::= { agentInventoryGroup 16 }
  292 
  293      agentInventoryIsForeignAPSupported OBJECT-TYPE
  294          SYNTAX      TruthValue
  295          MAX-ACCESS  read-only
  296          STATUS      current
  297          DESCRIPTION
  298                     "States whether the switch supports third party
  299                      Access Points."
  300          ::= { agentInventoryGroup 17 }
  301 
  302 
  303     agentInventoryMaxNumberOfAPsSupported OBJECT-TYPE
  304          SYNTAX      Integer32
  305          MAX-ACCESS  read-only
  306          STATUS      current
  307          DESCRIPTION
  308                      "Maximum number of APs supported with this
  309                       Controller."
  310 
  311          ::= { agentInventoryGroup 18 }
  312 
  313      agentInventoryIsCryptoCard2Present OBJECT-TYPE
  314          SYNTAX      TruthValue
  315          MAX-ACCESS  read-only
  316          STATUS      current
  317          DESCRIPTION
  318                     "True if the switch is carrying second Crypto
  319                      card for 4400 controller."
  320          ::= { agentInventoryGroup 19 }
  321 
  322      agentInventoryFipsModeEnabled OBJECT-TYPE
  323          SYNTAX      TruthValue
  324          MAX-ACCESS  read-only
  325          STATUS      current
  326          DESCRIPTION
  327                     "True if FIPS (Federal Information Processing
  328                      Standards) mode has been enabled on the
  329                      controller.False if FIPS mode has not been
  330                      enabled. FIPS mode can only be enabled through
  331                      console."
  332          DEFVAL {false}
  333          ::= { agentInventoryGroup 20 }
  334 
  335 
  336 --********************************************************************
  337 -- agentTrapLogGroup
  338 --********************************************************************
  339 
  340     agentTrapLogGroup       OBJECT IDENTIFIER ::= { agentInfoGroup 2}
  341 
  342     agentTrapLogTotal OBJECT-TYPE
  343          SYNTAX      Integer32
  344          MAX-ACCESS  read-only
  345          STATUS      current
  346          DESCRIPTION
  347                      "The total number of traps sent since last
  348                       reset."
  349          ::= { agentTrapLogGroup 1 }
  350 
  351     agentTrapLogTotalSinceLastViewed OBJECT-TYPE
  352          SYNTAX      Integer32
  353          MAX-ACCESS  read-only
  354          STATUS      current
  355          DESCRIPTION
  356                      "The number of traps sent since last viewed."
  357          ::= { agentTrapLogGroup 3 }
  358 
  359     agentRadioUpDownTrapCount OBJECT-TYPE
  360          SYNTAX      Integer32
  361          MAX-ACCESS  read-only
  362          STATUS      current
  363          DESCRIPTION
  364                      "The total number of AP Up/Down traps sent since
  365                       last reset."
  366          ::= { agentTrapLogGroup 5 }
  367 
  368     agentApAssociateDisassociateTrapCount OBJECT-TYPE
  369          SYNTAX      Integer32
  370          MAX-ACCESS  read-only
  371          STATUS      current
  372          DESCRIPTION
  373                      "The total number of AP Associate/Disassociate
  374                       traps sent since last reset."
  375          ::= { agentTrapLogGroup 6 }
  376 
  377     agentApLoadProfileFailTrapCount OBJECT-TYPE
  378          SYNTAX      Integer32
  379          MAX-ACCESS  read-only
  380          STATUS      current
  381          DESCRIPTION
  382                      "The total number of AP Load Profile Failure
  383                       traps sent since last reset."
  384          ::= { agentTrapLogGroup 7 }
  385 
  386     agentApNoiseProfileFailTrapCount OBJECT-TYPE
  387          SYNTAX      Integer32
  388          MAX-ACCESS  read-only
  389          STATUS      current
  390          DESCRIPTION
  391                      "The total number of AP Noise Profile Failure
  392                       traps sent since last reset."
  393          ::= { agentTrapLogGroup 8 }
  394 
  395 
  396     agentApInterferenceProfileFailTrapCount OBJECT-TYPE
  397          SYNTAX      Integer32
  398          MAX-ACCESS  read-only
  399          STATUS      current
  400          DESCRIPTION
  401                      "The total number of AP Interference Profile
  402                       Failure traps sent since last reset."
  403          ::= { agentTrapLogGroup 9 }
  404 
  405     agentApCoverageProfileFailTrapCount OBJECT-TYPE
  406          SYNTAX      Integer32
  407          MAX-ACCESS  read-only
  408          STATUS      current
  409          DESCRIPTION
  410                      "The total number of AP Coverge Profile Failure
  411                       traps sent since last reset."
  412          ::= { agentTrapLogGroup 10 }
  413 
  414 
  415 --********************************************************************
  416 -- agentTrapLogTable
  417 --********************************************************************
  418 
  419     agentTrapLogTable OBJECT-TYPE
  420          SYNTAX SEQUENCE OF AgentTrapLogEntry
  421          MAX-ACCESS  not-accessible
  422          STATUS      current
  423          DESCRIPTION
  424                      "Agent Trap Log"
  425          ::= { agentTrapLogGroup 4 }
  426 
  427     agentTrapLogEntry OBJECT-TYPE
  428          SYNTAX      AgentTrapLogEntry
  429          MAX-ACCESS  not-accessible
  430          STATUS      current
  431          DESCRIPTION
  432                      "Agent trap log entry"
  433          INDEX { agentTrapLogIndex }
  434          ::= { agentTrapLogTable 1 }
  435 
  436     AgentTrapLogEntry ::= SEQUENCE {
  437           agentTrapLogIndex        Integer32,
  438           agentTrapLogSystemTime   DisplayString,
  439           agentTrapLogTrap         OCTET STRING
  440           }
  441 
  442     agentTrapLogIndex OBJECT-TYPE
  443          SYNTAX      Integer32
  444          MAX-ACCESS  read-only
  445          STATUS      current
  446          DESCRIPTION
  447                      "Unique index of trap entry"
  448          ::= { agentTrapLogEntry 1 }
  449 
  450     agentTrapLogSystemTime OBJECT-TYPE
  451          SYNTAX      DisplayString
  452          MAX-ACCESS  read-only
  453          STATUS      current
  454          DESCRIPTION
  455                      "System uptime when trap was sent. This entry
  456                       shows how long the system has been up when the
  457                       trap occurred."
  458          ::= { agentTrapLogEntry 2 }
  459 
  460     agentTrapLogTrap OBJECT-TYPE
  461          SYNTAX      OCTET STRING (SIZE (0..512))
  462          MAX-ACCESS  read-only
  463          STATUS      current
  464          DESCRIPTION
  465                      "Description of the trap sent."
  466          ::= { agentTrapLogEntry 22 }
  467 
  468 
  469 --********************************************************************
  470 -- agentSwitchInfoGroup
  471 --********************************************************************
  472 
  473     agentSwitchInfoGroup    OBJECT IDENTIFIER ::= { agentInfoGroup 3 }
  474 
  475 
  476     agentSwitchInfoLwappTransportMode OBJECT-TYPE
  477          SYNTAX      INTEGER {
  478                      layer2(1),
  479                      layer3(2)
  480                   }
  481          MAX-ACCESS  read-only
  482          STATUS      current
  483          DESCRIPTION
  484                      "The LWAPP transport mode specifies if the switch
  485                       is operating in Layer2 or Layer3 mode.  This
  486                       attribute gives the current mode the switch is
  487                       operating on."
  488          ::= { agentSwitchInfoGroup 1 }
  489 
  490     agentSwitchInfoPowerSupply1Present OBJECT-TYPE
  491          SYNTAX      INTEGER {
  492                      false(0),
  493                      true(1)
  494                   }
  495          MAX-ACCESS  read-only
  496          STATUS      current
  497          DESCRIPTION
  498                      "This is to indicate if the switch has Power
  499                       Supply 1 present on it.  This is applicable to
  500                       the 4200 series and will always return true for
  501                       the earlier device versions."
  502          ::= { agentSwitchInfoGroup 2 }
  503 
  504     agentSwitchInfoPowerSupply1Operational OBJECT-TYPE
  505          SYNTAX      INTEGER {
  506                      false(0),
  507                      true(1)
  508                   }
  509          MAX-ACCESS  read-only
  510          STATUS      current
  511          DESCRIPTION
  512                      "This is to indicate if the switch's Power Supply
  513                       1 is operational.  This is applicable to the
  514                       4200 series and will always return true for the
  515                       earlier device versions."
  516          ::= { agentSwitchInfoGroup 3 }
  517 
  518     agentSwitchInfoPowerSupply2Present OBJECT-TYPE
  519          SYNTAX      INTEGER {
  520                      false(0),
  521                      true(1)
  522                   }
  523          MAX-ACCESS  read-only
  524          STATUS      current
  525          DESCRIPTION
  526                      "This is to indicate if the switch has Power
  527                       Supply 2 present on it.  This is applicable to
  528                       the 4200 series and will always return false for
  529                       the earlier device versions."
  530          ::= { agentSwitchInfoGroup 4 }
  531 
  532     agentSwitchInfoPowerSupply2Operational OBJECT-TYPE
  533          SYNTAX      INTEGER {
  534                      false(0),
  535                      true(1)
  536                   }
  537          MAX-ACCESS  read-only
  538          STATUS      current
  539          DESCRIPTION
  540                      "This is to indicate if the switch's Power Supply
  541                       2 is operational.This is applicable to the 4200
  542                       series and will always return false for the
  543                       earlier device versions."
  544          ::= { agentSwitchInfoGroup 5 }
  545 
  546 
  547 --********************************************************************
  548 -- agentResourceInfoGroup
  549 --********************************************************************
  550 
  551     agentResourceInfoGroup  OBJECT IDENTIFIER ::= { agentInfoGroup 5 }
  552 
  553     agentCurrentCPUUtilization OBJECT-TYPE
  554          SYNTAX      INTEGER(0..100)
  555          MAX-ACCESS  read-only
  556          STATUS      current
  557          DESCRIPTION
  558                      "Current CPU Load of the switch in percentage."
  559          ::= { agentResourceInfoGroup 1 }
  560 
  561     agentTotalMemory OBJECT-TYPE
  562      SYNTAX      Integer32
  563      MAX-ACCESS  read-only
  564      STATUS      current
  565      DESCRIPTION
  566          "Total RAM of the switch in Kbytes."
  567          ::= { agentResourceInfoGroup 2 }
  568 
  569     agentFreeMemory OBJECT-TYPE
  570      SYNTAX      Integer32
  571      MAX-ACCESS  read-only
  572      STATUS      current
  573      DESCRIPTION
  574          "Free RAM of the switch in Kbytes."
  575          ::= { agentResourceInfoGroup 3 }
  576 
  577 --********************************************************************
  578 -- agentWcpInfoGroup
  579 --********************************************************************
  580 
  581 
  582     agentWcpInfoGroup    OBJECT IDENTIFIER ::= { agentInfoGroup 6 }
  583 
  584     agentWcpDeviceName OBJECT-TYPE
  585          SYNTAX      DisplayString (SIZE (0..32))
  586          MAX-ACCESS  read-only
  587          STATUS      current
  588          DESCRIPTION
  589                      "This is the name of the device this controller
  590                       is residing on."
  591          ::= { agentWcpInfoGroup 1 }
  592 
  593     agentWcpSlotNumber OBJECT-TYPE
  594          SYNTAX      Unsigned32(1..16)
  595          MAX-ACCESS  read-only
  596          STATUS      current
  597          DESCRIPTION
  598                      "The slot number on the Wcp Device that this
  599                       controller is residing on."
  600          ::= { agentWcpInfoGroup 2 }
  601 
  602     agentWcpPortNumber OBJECT-TYPE
  603          SYNTAX      Unsigned32(1..2)
  604          MAX-ACCESS  read-only
  605          STATUS      current
  606          DESCRIPTION
  607                      "The port number on the Wcp Device that this
  608                       controller is residing on."
  609          ::= { agentWcpInfoGroup 3 }
  610 
  611     agentWcpPeerPortNumber OBJECT-TYPE
  612          SYNTAX      Unsigned32(1..2)
  613          MAX-ACCESS  read-only
  614          STATUS      current
  615          DESCRIPTION
  616                      "The port number of this controller's peer on the
  617                       same slot on Wcp Device that this controller is
  618                       residing on."
  619          ::= { agentWcpInfoGroup 4 }
  620 
  621     agentWcpPeerIpAddress OBJECT-TYPE
  622          SYNTAX      IpAddress
  623          MAX-ACCESS  read-only
  624          STATUS      current
  625          DESCRIPTION
  626                      "The IP Address of this controller's peer on the
  627                       same slot on Wcp Device that this controller is
  628                       residing on."
  629          ::= { agentWcpInfoGroup 5 }
  630 
  631     agentWcpControllerTableChecksum OBJECT-TYPE
  632          SYNTAX      Integer32
  633          MAX-ACCESS  read-only
  634          STATUS      current
  635          DESCRIPTION
  636                      "This is the checksum that tracks the changes in
  637                       the agentWcpControllerInfoTable. If there is any
  638                       change in the information on this table, the
  639                       checksum changes."
  640          ::= { agentWcpInfoGroup 6 }
  641 
  642     agentWcpControllerInfoTable OBJECT-TYPE
  643          SYNTAX      SEQUENCE OF AgentWcpControllerInfoEntry
  644          MAX-ACCESS  not-accessible
  645          STATUS      current
  646          DESCRIPTION
  647                      "A table of the wireless controllers on a WCP
  648                       device."
  649          ::= { agentWcpInfoGroup 7 }
  650 
  651     agentWcpControllerInfoEntry OBJECT-TYPE
  652          SYNTAX      AgentWcpControllerInfoEntry
  653          MAX-ACCESS  not-accessible
  654          STATUS      current
  655          DESCRIPTION
  656                      "Entry for a wireless controller on a WCP
  657                      device."
  658          INDEX { agentWcpControllerInfoSlotNumber,
  659                  agentWcpControllerInfoPortNumber }
  660          ::= { agentWcpControllerInfoTable 1 }
  661 
  662     AgentWcpControllerInfoEntry ::= SEQUENCE {
  663            agentWcpControllerInfoSlotNumber        Unsigned32,
  664            agentWcpControllerInfoPortNumber        Unsigned32,
  665            agentWcpControllerInfoIpAddress         IpAddress
  666        }
  667 
  668     agentWcpControllerInfoSlotNumber OBJECT-TYPE
  669          SYNTAX      Unsigned32(1..16)
  670          MAX-ACCESS  read-only
  671          STATUS      current
  672          DESCRIPTION
  673                      "The slot number on the Wcp device that a
  674                       controller is residing on."
  675          ::= { agentWcpControllerInfoEntry 1 }
  676 
  677     agentWcpControllerInfoPortNumber OBJECT-TYPE
  678          SYNTAX      Unsigned32(1..2)
  679          MAX-ACCESS  read-only
  680          STATUS      current
  681          DESCRIPTION
  682                      "The port number on the Wcp Device that a
  683                       controller is residing on."
  684          ::= { agentWcpControllerInfoEntry 2 }
  685 
  686     agentWcpControllerInfoIpAddress OBJECT-TYPE
  687          SYNTAX      IpAddress
  688          MAX-ACCESS  read-only
  689          STATUS      current
  690          DESCRIPTION
  691                      "The management IP Address of a controller."
  692          ::= { agentWcpControllerInfoEntry 10 }
  693 
  694 
  695 --********************************************************************
  696 -- agentProductGroup
  697 --********************************************************************
  698 
  699     agentProductGroup     OBJECT IDENTIFIER ::= { agentInfoGroup 4 }
  700 
  701 --********************************************************************
  702 -- productGroup1. This includes the 4000 switch series: 4012, 4024 and
  703 -- the 4100 appliance series: 4101 and 4102
  704 --********************************************************************
  705 
  706     productGroup1        OBJECT IDENTIFIER ::= { agentProductGroup 1 }
  707 
  708 --********************************************************************
  709 -- productGroup2. This includes the Branch Office Switch series
  710 --********************************************************************
  711 
  712     productGroup2        OBJECT IDENTIFIER ::= { agentProductGroup 2 }
  713 
  714 --********************************************************************
  715 -- productGroup3. This includes the 4200 switch series: 4202 and 4204
  716 --
  717 --********************************************************************
  718 
  719     productGroup3        OBJECT IDENTIFIER ::= { agentProductGroup 3 }
  720 
  721 --********************************************************************
  722 -- productGroup4. This includes the Catalyst 6k series with 2
  723 -- 4204s on a single blade
  724 --********************************************************************
  725 
  726     productGroup4        OBJECT IDENTIFIER ::= { agentProductGroup 4 }
  727 
  728 --********************************************************************
  729    agentCLIConfigGroup    OBJECT IDENTIFIER ::= { agentConfigGroup 1 }
  730 
  731 --********************************************************************
  732 -- agentLoginSessionTable
  733 --********************************************************************
  734 
  735     agentLoginSessionTable OBJECT-TYPE
  736          SYNTAX      SEQUENCE OF AgentLoginSessionEntry
  737          MAX-ACCESS  not-accessible
  738          STATUS      current
  739          DESCRIPTION
  740                      "A table of the switch's login session"
  741          ::= { agentCLIConfigGroup 1 }
  742 
  743     agentLoginSessionEntry OBJECT-TYPE
  744          SYNTAX      AgentLoginSessionEntry
  745          MAX-ACCESS  not-accessible
  746          STATUS      current
  747          DESCRIPTION
  748                      "Login Session Entry"
  749          INDEX { agentLoginSessionIndex }
  750          ::= { agentLoginSessionTable 1 }
  751 
  752     AgentLoginSessionEntry ::= SEQUENCE {
  753            agentLoginSessionIndex              Integer32,
  754            agentLoginSessionUserName           DisplayString,
  755            agentLoginSessionIPAddress          IpAddress,
  756            agentLoginSessionConnectionType     INTEGER,
  757            agentLoginSessionIdleTime           TimeTicks,
  758            agentLoginSessionSessionTime        TimeTicks,
  759            agentLoginSessionStatus             RowStatus
  760        }
  761 
  762     agentLoginSessionIndex OBJECT-TYPE
  763          SYNTAX      Integer32
  764          MAX-ACCESS  read-only
  765          STATUS      current
  766          DESCRIPTION
  767                      "Agent Login Session Index of the switch"
  768          ::= { agentLoginSessionEntry 1 }
  769 
  770     agentLoginSessionUserName OBJECT-TYPE
  771          SYNTAX      DisplayString
  772          MAX-ACCESS  read-only
  773          STATUS      current
  774          DESCRIPTION
  775                      "Agent Login Session UserName of the switch"
  776          ::= { agentLoginSessionEntry 2 }
  777 
  778     agentLoginSessionIPAddress OBJECT-TYPE
  779          SYNTAX      IpAddress
  780          MAX-ACCESS  read-only
  781          STATUS      current
  782          DESCRIPTION
  783                      "Agent Login Session IP Address of the switch"
  784          ::= { agentLoginSessionEntry 3 }
  785 
  786     agentLoginSessionConnectionType OBJECT-TYPE
  787          SYNTAX      INTEGER {
  788                       serial(1),
  789                       telnet(2),
  790                       web(3),
  791                       ssl(4)
  792                      }
  793          MAX-ACCESS  read-only
  794          STATUS      current
  795          DESCRIPTION
  796                      "Agent Login Session Connection Type of the
  797                      switch"
  798          ::= { agentLoginSessionEntry 4 }
  799 
  800     agentLoginSessionIdleTime OBJECT-TYPE
  801          SYNTAX      TimeTicks
  802          MAX-ACCESS  read-only
  803          STATUS      current
  804          DESCRIPTION
  805                      "Agent Login Session Idle Time of the switch"
  806          ::= { agentLoginSessionEntry 5 }
  807 
  808     agentLoginSessionSessionTime OBJECT-TYPE
  809          SYNTAX      TimeTicks
  810          MAX-ACCESS  read-only
  811          STATUS      current
  812          DESCRIPTION
  813                      "Agent Login Session Time of the switch"
  814          ::= { agentLoginSessionEntry 6 }
  815 
  816     agentLoginSessionStatus OBJECT-TYPE
  817          SYNTAX      RowStatus
  818          MAX-ACCESS  read-write
  819          STATUS      current
  820          DESCRIPTION
  821                      "Status of the user.
  822                      active(1)  - This connection is active.
  823                      destroy(6) - Set to this value to disconnect
  824                                   this user."
  825          ::= { agentLoginSessionEntry 26 }
  826 
  827 
  828 --********************************************************************
  829 -- agentTelnetConfigGroup
  830 --********************************************************************
  831 
  832   agentTelnetConfigGroup OBJECT IDENTIFIER ::= {agentCLIConfigGroup 2}
  833 
  834     agentTelnetLoginTimeout OBJECT-TYPE
  835          SYNTAX      Integer32 (0..160)
  836          MAX-ACCESS  read-write
  837          STATUS      current
  838          DESCRIPTION
  839                      "Telnet login timeout (minutes)
  840                      Config telnet timeout  will set the telnet
  841                      session timeout value.  A session is active as
  842                      long as the session has not remained idle for
  843                      the value set. Specify a value from 0 to 160.
  844                      A value of 0 indicates that a Telnet session
  845                      remains active indefinitely.
  846                      Note: Changing the timeout value for active
  847                      sessions does not become effective until the
  848                      session is reaccessed. Any keystroke will
  849                      also activate the new timeout duration."
  850          ::= { agentTelnetConfigGroup 1 }
  851 
  852     agentTelnetMaxSessions OBJECT-TYPE
  853          SYNTAX      Integer32 (0..5)
  854          MAX-ACCESS  read-write
  855          STATUS      current
  856          DESCRIPTION
  857                      "Maximum number of Telnet Sessions
  858                      Config telnet maxsessions is an integer value
  859                      from 0 to 5 that specifies the maximum number of
  860                      telnet sessions that can be established. If the
  861                      value is 0, no Telnet session can be established."
  862          ::= { agentTelnetConfigGroup 2 }
  863 
  864     agentTelnetAllowNewMode OBJECT-TYPE
  865          SYNTAX      INTEGER {
  866                      enable(1),
  867                      disable(2)
  868                   }
  869          MAX-ACCESS  read-write
  870          STATUS      current
  871          DESCRIPTION
  872                      "Allow new telnet sessions (enable or disable)
  873                      Config telnet disable means that no new Telnet
  874                      sessions are to be established. Any already
  875                      established session remains active until
  876                      the session is ended or an abnormal network error
  877                      ends it. "
  878           ::= { agentTelnetConfigGroup 3 }
  879 
  880     agentSSHAllowNewMode OBJECT-TYPE
  881          SYNTAX      INTEGER {
  882                      enable(1),
  883                      disable(2)
  884                   }
  885          MAX-ACCESS  read-write
  886          STATUS      current
  887          DESCRIPTION
  888                      "Allow new SSH sessions (enable or disable)
  889                      Config SSH disable means that no new SSH sessions
  890                      are to be established. Any already established
  891                      session remains active until the session is ended
  892                      or an abnormal network error ends it."
  893           ::= { agentTelnetConfigGroup 4 }
  894 
  895 --********************************************************************
  896 -- agentSerialGroup
  897 --********************************************************************
  898 
  899     agentSerialGroup   OBJECT IDENTIFIER ::= { agentCLIConfigGroup 5 }
  900 
  901     agentSerialTimeout OBJECT-TYPE
  902          SYNTAX      Integer32
  903          MAX-ACCESS  read-write
  904          STATUS      current
  905          DESCRIPTION
  906                      "Agent Serial Timeout "
  907          ::= { agentSerialGroup 1 }
  908 
  909     agentSerialBaudrate OBJECT-TYPE
  910          SYNTAX      INTEGER {
  911                       baud1200(1),
  912                       baud2400(2),
  913                       baud4800(3),
  914                       baud9600(4),
  915                       baud19200(5),
  916                       baud38400(6),
  917                       baud57600(7),
  918                       baud115200(8)
  919                      }
  920          MAX-ACCESS  read-write
  921          STATUS      current
  922          DESCRIPTION
  923                      " Agent Serial Baudrate"
  924          ::= { agentSerialGroup 2 }
  925 
  926     agentSerialCharacterSize OBJECT-TYPE
  927          SYNTAX      Integer32
  928          MAX-ACCESS  read-only
  929          STATUS      current
  930          DESCRIPTION
  931                      " Agent Serial Character Size"
  932          ::= { agentSerialGroup 3 }
  933 
  934     agentSerialHWFlowControlMode OBJECT-TYPE
  935          SYNTAX      INTEGER {
  936                       enable(1),
  937                       disable(2)
  938                       }
  939          MAX-ACCESS  read-only
  940          STATUS      current
  941          DESCRIPTION
  942                      " Agent Serial Hardware Flow Control."
  943          ::= { agentSerialGroup 4 }
  944 
  945     agentSerialStopBits OBJECT-TYPE
  946          SYNTAX      Integer32
  947          MAX-ACCESS  read-only
  948          STATUS      current
  949          DESCRIPTION
  950                      " Agent Serial Stop Bits"
  951          ::= { agentSerialGroup 5 }
  952 
  953     agentSerialParityType OBJECT-TYPE
  954          SYNTAX      INTEGER {
  955                       even(1),
  956                       odd(2),
  957                       none(3)
  958                       }
  959          MAX-ACCESS  read-only
  960          STATUS      current
  961          DESCRIPTION
  962                      " Agent Serial Parity Type"
  963          ::= { agentSerialGroup 6 }
  964 
  965 --*******************************************************************
  966 -- agentLagConfigGroup
  967 --********************************************************************
  968     agentLagConfigGroup   OBJECT IDENTIFIER ::= { agentConfigGroup 2 }
  969 
  970     agentLagConfigCreate OBJECT-TYPE
  971          SYNTAX      DisplayString (SIZE(1..15))
  972          MAX-ACCESS  read-write
  973          STATUS      obsolete
  974          DESCRIPTION
  975                      "Agent Lag Create.
  976                      When this object is set with a non-empty string,
  977                      a new lag will be created.if possible with the
  978                      entered string as it's name."
  979          ::= { agentLagConfigGroup 1 }
  980 
  981     agentLagSummaryConfigTable OBJECT-TYPE
  982          SYNTAX      SEQUENCE OF AgentLagSummaryConfigEntry
  983          MAX-ACCESS  not-accessible
  984          STATUS      obsolete
  985          DESCRIPTION
  986                      "A summary table of the switch's lag config
  987                      entries"
  988          ::= { agentLagConfigGroup 2 }
  989 
  990     agentLagSummaryConfigEntry OBJECT-TYPE
  991          SYNTAX      AgentLagSummaryConfigEntry
  992          MAX-ACCESS  not-accessible
  993          STATUS      obsolete
  994          DESCRIPTION
  995                      "Switch's lag config entry"
  996          INDEX       { agentLagSummaryName }
  997          ::= { agentLagSummaryConfigTable 1 }
  998 
  999     AgentLagSummaryConfigEntry ::= SEQUENCE {
 1000              agentLagSummaryName           DisplayString,
 1001              agentLagSummaryLagIndex       Integer32,
 1002              agentLagSummaryFlushTimer     Integer32,
 1003              agentLagSummaryLinkTrap       INTEGER,
 1004              agentLagSummaryAdminMode      INTEGER,
 1005              agentLagSummaryStpMode        INTEGER,
 1006              agentLagSummaryAddPort        Integer32,
 1007              agentLagSummaryDeletePort     Integer32,
 1008              agentLagSummaryPortsBitMask   Unsigned32,
 1009              agentLagSummaryStatus         RowStatus
 1010              }
 1011     agentLagSummaryName OBJECT-TYPE
 1012          SYNTAX      DisplayString (SIZE(1..15))
 1013          MAX-ACCESS  read-create
 1014          STATUS      obsolete
 1015          DESCRIPTION
 1016                      "Agent Lag Name"
 1017          ::= { agentLagSummaryConfigEntry 1 }
 1018 
 1019     agentLagSummaryLagIndex OBJECT-TYPE
 1020          SYNTAX      Integer32
 1021          MAX-ACCESS  read-only
 1022          STATUS      obsolete
 1023          DESCRIPTION
 1024                      "Agent Lag If Index"
 1025          ::= { agentLagSummaryConfigEntry 2 }
 1026 
 1027 
 1028     agentLagSummaryFlushTimer OBJECT-TYPE
 1029          SYNTAX      Integer32
 1030          MAX-ACCESS  read-create
 1031          STATUS      obsolete
 1032          DESCRIPTION
 1033                      "Agent Lag Flush Timer"
 1034          ::= { agentLagSummaryConfigEntry 3 }
 1035 
 1036     agentLagSummaryLinkTrap OBJECT-TYPE
 1037          SYNTAX      INTEGER {
 1038                       enable(1),
 1039                       disable(2)
 1040                      }
 1041          MAX-ACCESS  read-create
 1042          STATUS      obsolete
 1043          DESCRIPTION
 1044                      "Agent Lag Link Trap"
 1045          ::= { agentLagSummaryConfigEntry 4 }
 1046 
 1047     agentLagSummaryAdminMode OBJECT-TYPE
 1048          SYNTAX      INTEGER {
 1049                       enable(1),
 1050                       disable(2)
 1051                      }
 1052          MAX-ACCESS  read-create
 1053          STATUS      obsolete
 1054          DESCRIPTION
 1055                      "Agent Lag Admin Mode"
 1056          ::= { agentLagSummaryConfigEntry 5 }
 1057 
 1058     agentLagSummaryStpMode OBJECT-TYPE
 1059          SYNTAX      INTEGER {
 1060                       dot1d(1),
 1061                       fast(2),
 1062                       off(3)
 1063                      }
 1064          MAX-ACCESS  read-create
 1065          STATUS      obsolete
 1066          DESCRIPTION
 1067                      "Agent Lag STP Mode"
 1068          ::= { agentLagSummaryConfigEntry 6 }
 1069 
 1070     agentLagSummaryAddPort OBJECT-TYPE
 1071          SYNTAX      Integer32
 1072          MAX-ACCESS  read-create
 1073          STATUS      obsolete
 1074          DESCRIPTION
 1075                      "Agent Lag Add Port.
 1076                       Note: agentPortType for the port to be added
 1077                       must be full duplex and the same speed as
 1078                       previously added port(s), if any."
 1079          ::= { agentLagSummaryConfigEntry 7 }
 1080 
 1081     agentLagSummaryDeletePort OBJECT-TYPE
 1082          SYNTAX      Integer32
 1083          MAX-ACCESS  read-create
 1084          STATUS      obsolete
 1085          DESCRIPTION
 1086                      "Agent Lag Delete Port"
 1087          ::= { agentLagSummaryConfigEntry 8 }
 1088 
 1089     agentLagSummaryPortsBitMask OBJECT-TYPE
 1090          SYNTAX      Unsigned32
 1091          MAX-ACCESS  read-create
 1092          STATUS      obsolete
 1093          DESCRIPTION
 1094                      "Agent Lag Member Ports in bit mask
 1095                      representation"
 1096          ::= { agentLagSummaryConfigEntry 9 }
 1097 
 1098     agentLagSummaryStatus OBJECT-TYPE
 1099          SYNTAX      RowStatus
 1100          MAX-ACCESS  read-create
 1101          STATUS      obsolete
 1102          DESCRIPTION
 1103                      "Agent Lag Status.
 1104                       active(1)  - This Lag is enabled.
 1105                       destroy(6) - Set to this value to remove the
 1106                       Lag."
 1107          ::= { agentLagSummaryConfigEntry 30 }
 1108 
 1109 
 1110 --*******************************************************************
 1111 -- agentLagDetailedConfigTable
 1112 --*******************************************************************
 1113 
 1114     agentLagDetailedConfigTable OBJECT-TYPE
 1115          SYNTAX      SEQUENCE OF AgentLagDetailedConfigEntry
 1116          MAX-ACCESS  not-accessible
 1117          STATUS      obsolete
 1118          DESCRIPTION
 1119                      "A detailed table of the switch's lag config
 1120                       entries"
 1121          ::= { agentLagConfigGroup 3 }
 1122 
 1123     agentLagDetailedConfigEntry OBJECT-TYPE
 1124          SYNTAX      AgentLagDetailedConfigEntry
 1125          MAX-ACCESS  not-accessible
 1126          STATUS      obsolete
 1127          DESCRIPTION
 1128                      "Switch's lag config entry"
 1129          INDEX       { agentLagDetailedLagIndex,
 1130                        agentLagDetailedIfIndex }
 1131          ::= { agentLagDetailedConfigTable 1 }
 1132 
 1133     AgentLagDetailedConfigEntry ::= SEQUENCE {
 1134              agentLagDetailedLagIndex  Integer32,
 1135              agentLagDetailedIfIndex   Integer32,
 1136              agentLagDetailedPortSpeed OBJECT IDENTIFIER
 1137              }
 1138 
 1139     agentLagDetailedLagIndex OBJECT-TYPE
 1140          SYNTAX      Integer32
 1141          MAX-ACCESS  read-only
 1142          STATUS      obsolete
 1143          DESCRIPTION
 1144                      "Lag index"
 1145          ::= { agentLagDetailedConfigEntry 1 }
 1146 
 1147     agentLagDetailedIfIndex OBJECT-TYPE
 1148          SYNTAX      Integer32
 1149          MAX-ACCESS  read-only
 1150          STATUS      obsolete
 1151          DESCRIPTION
 1152                      "Lag port index"
 1153          ::= { agentLagDetailedConfigEntry 2 }
 1154 
 1155     agentLagDetailedPortSpeed OBJECT-TYPE
 1156          SYNTAX      OBJECT IDENTIFIER
 1157          MAX-ACCESS  read-only
 1158          STATUS      obsolete
 1159          DESCRIPTION
 1160                      "Lag port speed. See agentPortType for
 1161                       description and list of valid values."
 1162          ::= { agentLagDetailedConfigEntry 22 }
 1163 
 1164 
 1165     agentLagConfigMode OBJECT-TYPE
 1166          SYNTAX      INTEGER {
 1167                       off(1),
 1168                       on(2)
 1169                      }
 1170          MAX-ACCESS  read-write
 1171          STATUS      obsolete
 1172          DESCRIPTION
 1173                      "The Lag Mode on the 4400 series controller. When
 1174                       it is on, all the gigabit ports are bound to one
 1175                       aggregated link."
 1176          ::= { agentLagConfigGroup 4 }
 1177 
 1178 
 1179 --********************************************************************
 1180 -- agentNetworkConfigGroup
 1181 --********************************************************************
 1182 
 1183   agentNetworkConfigGroup OBJECT IDENTIFIER ::= { agentConfigGroup 3 }
 1184 
 1185     agentNetworkIPAddress OBJECT-TYPE
 1186          SYNTAX      IpAddress
 1187          MAX-ACCESS  read-write
 1188          STATUS      current
 1189          DESCRIPTION
 1190                      "The switch's network ip address"
 1191          ::= { agentNetworkConfigGroup 1 }
 1192 
 1193     agentNetworkSubnetMask OBJECT-TYPE
 1194          SYNTAX      IpAddress
 1195          MAX-ACCESS  read-write
 1196          STATUS      current
 1197          DESCRIPTION
 1198                      "The switch's network subnet mask"
 1199          ::= { agentNetworkConfigGroup 2 }
 1200 
 1201     agentNetworkDefaultGateway OBJECT-TYPE
 1202          SYNTAX      IpAddress
 1203          MAX-ACCESS  read-write
 1204          STATUS      current
 1205          DESCRIPTION
 1206                      "The switch's network default gateway"
 1207          ::= { agentNetworkConfigGroup 3 }
 1208 
 1209     agentNetworkBurnedInMacAddress OBJECT-TYPE
 1210          SYNTAX      PhysAddress
 1211          MAX-ACCESS  read-only
 1212          STATUS      current
 1213          DESCRIPTION
 1214                      "The switch's Burned-In MAC address"
 1215          ::= { agentNetworkConfigGroup 4 }
 1216 
 1217     agentNetworkConfigProtocol OBJECT-TYPE
 1218          SYNTAX      INTEGER {
 1219                      none(1),
 1220                      bootp(2),
 1221                      dhcp(3)
 1222                   }
 1223          MAX-ACCESS  read-write
 1224          STATUS      current
 1225          DESCRIPTION
 1226                      "The switch's network config protocol"
 1227          ::= { agentNetworkConfigGroup 7 }
 1228 
 1229     agentNetworkWebMode OBJECT-TYPE
 1230          SYNTAX      INTEGER {
 1231                      enable(1),
 1232                      disable(2)
 1233                 }
 1234          MAX-ACCESS  read-write
 1235          STATUS      current
 1236          DESCRIPTION
 1237                      "The switch's web access mode."
 1238           ::= { agentNetworkConfigGroup 8 }
 1239 
 1240     agentNetworkSecureWebMode OBJECT-TYPE
 1241          SYNTAX      INTEGER {
 1242                      enable(1),
 1243                      disable(0)
 1244                 }
 1245          MAX-ACCESS  read-write
 1246          STATUS      current
 1247          DESCRIPTION
 1248                      "If https is enable or not provided web mode is
 1249                       enabled"
 1250           ::= { agentNetworkConfigGroup 9 }
 1251 
 1252     agentNetworkMulticastMode OBJECT-TYPE
 1253          SYNTAX      INTEGER {
 1254                      disable(0),
 1255                      unicast(1),
 1256                      multicast(2)
 1257                 }
 1258          MAX-ACCESS  read-write
 1259          STATUS      current
 1260          DESCRIPTION
 1261                      "Switch's ethernet multicast support.
 1262                       disable- multicast is disabled
 1263                       multicast - Multicast is enabled.
 1264                       unicast- Controller will convert multicast to
 1265                                unicast packet."
 1266           ::= { agentNetworkConfigGroup 10 }
 1267 
 1268     agentNetworkDsPortNumber OBJECT-TYPE
 1269          SYNTAX      Integer32
 1270          MAX-ACCESS  read-write
 1271          STATUS      current
 1272          DESCRIPTION
 1273                      "The switch's distribution port number."
 1274           ::= { agentNetworkConfigGroup 11 }
 1275 
 1276     agentNetworkUserIdleTimeout OBJECT-TYPE
 1277          SYNTAX      Unsigned32(10..2147483647)
 1278          MAX-ACCESS  read-write
 1279          STATUS      current
 1280          DESCRIPTION
 1281                      "Sets the idle user timeout."
 1282           ::= { agentNetworkConfigGroup 12 }
 1283 
 1284 
 1285     agentNetworkArpTimeout OBJECT-TYPE
 1286          SYNTAX      Unsigned32(10..2147483647)
 1287          MAX-ACCESS  read-write
 1288          STATUS      current
 1289          DESCRIPTION
 1290                      "Sets the ARP entry timeout."
 1291           ::= { agentNetworkConfigGroup 13 }
 1292 
 1293     agentNetworkManagementVlan OBJECT-TYPE
 1294          SYNTAX      Unsigned32(0..4095)
 1295          MAX-ACCESS  read-write
 1296          STATUS      current
 1297          DESCRIPTION
 1298                      "VLAN ID of the network management interface."
 1299           ::= { agentNetworkConfigGroup 14 }
 1300 
 1301     agentNetworkGvrpStatus OBJECT-TYPE
 1302         SYNTAX      INTEGER { enabled(1), disabled(0) }
 1303         MAX-ACCESS  read-write
 1304         STATUS      obsolete
 1305         DESCRIPTION
 1306             "The state of GVRP operation on the Switch.  The value
 1307             enabled(1) indicates that GVRP is enabled on this port,
 1308             as long as dot1qGvrpStatus is also enabled for this
 1309             device.  When disabled(2) but dot1qGvrpStatus is still
 1310             enabled for the device, GVRP is disabled on this port:
 1311             any GVRP packets received will be silently discarded and
 1312             no GVRP registrations will be propagated from other
 1313             ports.  This object affects all GVRP Applicant and
 1314             Registrar state machines on this port.  A transition
 1315             from disabled(2) to enabled(1) will cause a reset of all
 1316             GVRP state machines on this port.(Attribute No longer
 1317             supported)"
 1318         DEFVAL      { enabled }
 1319         ::= { agentNetworkConfigGroup 15 }
 1320 
 1321     agentNetworkAllowMgmtViaWireless OBJECT-TYPE
 1322          SYNTAX INTEGER {enable(1),disable(0)}
 1323          MAX-ACCESS  read-write
 1324          STATUS      current
 1325          DESCRIPTION
 1326                      "This states whether Management via wireless is
 1327                       allowed or not."
 1328           ::= { agentNetworkConfigGroup 16 }
 1329 
 1330     agentNetworkBroadcastSsidMode OBJECT-TYPE
 1331          SYNTAX INTEGER {enable(1),disable(0)}
 1332          MAX-ACCESS  read-write
 1333          STATUS      current
 1334          DESCRIPTION
 1335                      "This mode when enabled allows WLAN SSIDs to be
 1336                       broadcasted."
 1337           ::= { agentNetworkConfigGroup 17 }
 1338 
 1339     agentNetworkSecureWebPassword OBJECT-TYPE
 1340          SYNTAX  OCTET STRING(SIZE(1..32))
 1341          MAX-ACCESS  read-write
 1342          STATUS      current
 1343          DESCRIPTION
 1344                     "SSL Certificate Password. This can be optionally
 1345                      set while downloading SSL certificates of type
 1346                      Web Admin and Web Authentication"
 1347           ::= { agentNetworkConfigGroup 18 }
 1348 
 1349     agentNetworkWebAdminCertType OBJECT-TYPE
 1350          SYNTAX  DisplayString (SIZE(1..80))
 1351          MAX-ACCESS  read-only
 1352          STATUS      current
 1353          DESCRIPTION
 1354                "Type of currently existing Web Admin Certificate
 1355                 installed on the Switch. It could be 'Empty' if the
 1356                 certificate is not present, 'Locally Generated' if
 1357                 the certificate is locally generated or it could
 1358                 have a name if it is downloaded externally."
 1359           ::= { agentNetworkConfigGroup 19 }
 1360 
 1361     agentNetworkWebAdminCertRegenerateCmdInvoke OBJECT-TYPE
 1362          SYNTAX INTEGER { default (0), activate (1) }
 1363          MAX-ACCESS  read-write
 1364          STATUS      current
 1365          DESCRIPTION
 1366                 "This command when set to 'activate' will regenerate
 1367                  a Web Administration Certificate Locally that will
 1368                  replace the existing certificate."
 1369           ::= { agentNetworkConfigGroup 20 }
 1370 
 1371     agentNetworkWebAuthCertType OBJECT-TYPE
 1372          SYNTAX  DisplayString (SIZE(1..80))
 1373          MAX-ACCESS  read-only
 1374          STATUS      current
 1375          DESCRIPTION
 1376                "Type of currently exisitng Web Authentication
 1377                Certificate installed on the Switch. It could be
 1378                'Empty' if the certificate is not present, 'Locally
 1379                Generated' if the certificate is locally generated or
 1380                it could have a name if it is downloaded externally."
 1381           ::= { agentNetworkConfigGroup 21 }
 1382 
 1383     agentNetworkWebAuthCertRegenerateCmdInvoke OBJECT-TYPE
 1384          SYNTAX INTEGER { default (0), activate (1) }
 1385          MAX-ACCESS  read-write
 1386          STATUS      current
 1387          DESCRIPTION
 1388                "This command when set to 'activate' will regenerate a
 1389                 Web Authentication Certificate Locally that will
 1390                 replace the existing certificate."
 1391           ::= { agentNetworkConfigGroup 22 }
 1392 
 1393     agentNetworkPeerToPeerBlockingMode OBJECT-TYPE
 1394          SYNTAX INTEGER {enable(1),disable(0)}
 1395          MAX-ACCESS  read-write
 1396          STATUS      current
 1397          DESCRIPTION
 1398                     "Mobile Peer to Peer Blocking mode on the switch."
 1399           ::= { agentNetworkConfigGroup 24 }
 1400 
 1401     agentNetworkMulticastGroupAddress OBJECT-TYPE
 1402          SYNTAX      IpAddress
 1403          MAX-ACCESS  read-write
 1404          STATUS      current
 1405          DESCRIPTION
 1406                      "Multicast group address for access points."
 1407          ::= { agentNetworkConfigGroup 25 }
 1408 
 1409 
 1410 --********************************************************************
 1411 -- agentNeworkRouteTable
 1412 --********************************************************************
 1413 
 1414      agentNetworkRouteConfigTable OBJECT-TYPE
 1415          SYNTAX      SEQUENCE OF AgentNetworkRouteConfigEntry
 1416          MAX-ACCESS  not-accessible
 1417          STATUS      current
 1418          DESCRIPTION
 1419                      "A table of the switch's Network Route entries"
 1420          ::= { agentNetworkConfigGroup 23 }
 1421 
 1422     agentNetworkRouteConfigEntry OBJECT-TYPE
 1423          SYNTAX      AgentNetworkRouteConfigEntry
 1424          MAX-ACCESS  not-accessible
 1425          STATUS      current
 1426          DESCRIPTION
 1427                      "Switch's Network Route entry"
 1428          INDEX       {agentNetworkRouteIPAddress }
 1429          ::= { agentNetworkRouteConfigTable 1 }
 1430 
 1431     AgentNetworkRouteConfigEntry ::= SEQUENCE {
 1432            agentNetworkRouteIPAddress   IpAddress,
 1433            agentNetworkRouteIPNetmask   IpAddress,
 1434            agentNetworkRouteGateway     IpAddress,
 1435            agentNetworkRouteStatus      RowStatus
 1436        }
 1437 
 1438     agentNetworkRouteIPAddress OBJECT-TYPE
 1439          SYNTAX      IpAddress
 1440          MAX-ACCESS  read-create
 1441          STATUS      current
 1442          DESCRIPTION
 1443                 "Network Route IP Address."
 1444          ::= { agentNetworkRouteConfigEntry 1 }
 1445 
 1446     agentNetworkRouteIPNetmask OBJECT-TYPE
 1447          SYNTAX      IpAddress
 1448          MAX-ACCESS  read-create
 1449          STATUS      current
 1450          DESCRIPTION
 1451            "   Network Route IP Netmask."
 1452          ::= { agentNetworkRouteConfigEntry 2 }
 1453 
 1454     agentNetworkRouteGateway OBJECT-TYPE
 1455          SYNTAX      IpAddress
 1456          MAX-ACCESS  read-create
 1457          STATUS      current
 1458          DESCRIPTION
 1459            "  Network Route IP Gateway."
 1460          ::= { agentNetworkRouteConfigEntry 3 }
 1461 
 1462     agentNetworkRouteStatus OBJECT-TYPE
 1463          SYNTAX    RowStatus
 1464          MAX-ACCESS  read-create
 1465          STATUS      current
 1466          DESCRIPTION
 1467                      "Network Route Row Status."
 1468          ::= { agentNetworkRouteConfigEntry 23 }
 1469 
 1470 
 1471 
 1472 --********************************************************************
 1473 -- agentInterfaceConfigTable
 1474 --********************************************************************
 1475 
 1476      agentInterfaceConfigTable OBJECT-TYPE
 1477          SYNTAX      SEQUENCE OF AgentInterfaceConfigEntry
 1478          MAX-ACCESS  not-accessible
 1479          STATUS      current
 1480          DESCRIPTION
 1481                 "A table of the switch's Interface Config entries
 1482                  Typically, it will contain entries for Service
 1483                  Port Interface, DS Port Interface and Virtual
 1484                  Gateway Interface apart from other entries."
 1485          ::= { agentConfigGroup 13 }
 1486 
 1487     agentInterfaceConfigEntry OBJECT-TYPE
 1488          SYNTAX      AgentInterfaceConfigEntry
 1489          MAX-ACCESS  not-accessible
 1490          STATUS      current
 1491          DESCRIPTION
 1492                      "Switch's Interface Config entry"
 1493          INDEX       { agentInterfaceName }
 1494          ::= { agentInterfaceConfigTable 1 }
 1495 
 1496     AgentInterfaceConfigEntry ::= SEQUENCE {
 1497            agentInterfaceName                    OCTET STRING,
 1498            agentInterfaceVlanId                  Integer32,
 1499            agentInterfaceType                    INTEGER,
 1500            agentInterfaceMacAddress              MacAddress,
 1501            agentInterfaceIPAddress               IpAddress,
 1502            agentInterfaceIPNetmask               IpAddress,
 1503            agentInterfaceIPGateway               IpAddress,
 1504            agentInterfacePortNo                  Integer32,
 1505            agentInterfaceActivePortNo            Integer32,
 1506            agentInterfaceBackupPortNo            Integer32,
 1507            agentInterfacePrimaryDhcpAddress      IpAddress,
 1508            agentInterfaceSecondaryDhcpAddress    IpAddress,
 1509            agentInterfaceDhcpProtocol            INTEGER,
 1510            agentInterfaceDnsHostName             DisplayString,
 1511            agentInterfaceAclName                 DisplayString,
 1512            agentInterfaceAPManagementFeature     INTEGER,
 1513            agentInterfaceRowStatus               RowStatus,
 1514            agentInterfaceVlanQuarantine          TruthValue
 1515        }
 1516 
 1517     agentInterfaceName OBJECT-TYPE
 1518         SYNTAX     OCTET STRING(SIZE(1..32))
 1519         MAX-ACCESS read-create
 1520         STATUS     current
 1521         DESCRIPTION
 1522                 "Interace Name. This values is 'management' for DS
 1523                  port, 'service-port' for service port and 'virtual'
 1524                  for virtual gateway. For other interfaces, the name
 1525                  can be anything. These interfaces are already created
 1526                  by default."
 1527         ::= { agentInterfaceConfigEntry 1 }
 1528 
 1529     agentInterfaceVlanId OBJECT-TYPE
 1530         SYNTAX Integer32(0..4094)
 1531         MAX-ACCESS read-create
 1532         STATUS current
 1533         DESCRIPTION
 1534                 "Vlan ID configured for the Interface."
 1535         DEFVAL{ 0 }
 1536         ::= { agentInterfaceConfigEntry 2 }
 1537 
 1538     agentInterfaceType OBJECT-TYPE
 1539          SYNTAX      INTEGER {
 1540                      static(0),
 1541                      dynamic(1)
 1542                   }
 1543          MAX-ACCESS  read-only
 1544          STATUS      current
 1545          DESCRIPTION
 1546                "The interface's type. The static type is set for
 1547                 the interfaces that are created by default on the
 1548                 switch and these cannot be deleted. Any other
 1549                 interface that is created is of type dynamic
 1550                 which can be deleted."
 1551          ::= { agentInterfaceConfigEntry 3 }
 1552 
 1553     agentInterfaceMacAddress OBJECT-TYPE
 1554         SYNTAX MacAddress
 1555         MAX-ACCESS read-only
 1556         STATUS current
 1557         DESCRIPTION
 1558                 "Interface MAC Address. This is only applicable in
 1559                 case of management and service-port interfaces."
 1560         ::= { agentInterfaceConfigEntry 4 }
 1561 
 1562     agentInterfaceIPAddress OBJECT-TYPE
 1563          SYNTAX      IpAddress
 1564          MAX-ACCESS  read-create
 1565          STATUS      current
 1566          DESCRIPTION
 1567                 "IP Address of the interface."
 1568          ::= { agentInterfaceConfigEntry 5 }
 1569 
 1570     agentInterfaceIPNetmask OBJECT-TYPE
 1571          SYNTAX      IpAddress
 1572          MAX-ACCESS  read-create
 1573          STATUS      current
 1574          DESCRIPTION
 1575                 "IP Netmask of the interface. This is 0 for the
 1576                  virtual interface."
 1577          ::= { agentInterfaceConfigEntry 6 }
 1578 
 1579     agentInterfaceIPGateway OBJECT-TYPE
 1580          SYNTAX      IpAddress
 1581          MAX-ACCESS  read-create
 1582          STATUS      current
 1583          DESCRIPTION
 1584                 "IP Gateway of the interface. This is 0 for virtual
 1585                 and service-port interface."
 1586          ::= { agentInterfaceConfigEntry 7 }
 1587 
 1588     agentInterfacePortNo OBJECT-TYPE
 1589         SYNTAX Integer32(0..25)
 1590         MAX-ACCESS read-create
 1591         STATUS current
 1592         DESCRIPTION
 1593                 "A value 0 means the port is not set. The valid value
 1594                  can be any one of the physical ports on the switch.
 1595                  This is the primary port configured on the
 1596                  interface."
 1597         DEFVAL{ 0 }
 1598         ::= { agentInterfaceConfigEntry 8 }
 1599 
 1600     agentInterfacePrimaryDhcpAddress OBJECT-TYPE
 1601          SYNTAX      IpAddress
 1602          MAX-ACCESS  read-create
 1603          STATUS      current
 1604          DESCRIPTION
 1605                 "Primary DHCP Server IP Address for the interface
 1606                  This applies to the management interface and other
 1607                  dynamic interfaces."
 1608          ::= { agentInterfaceConfigEntry 9 }
 1609 
 1610     agentInterfaceSecondaryDhcpAddress OBJECT-TYPE
 1611          SYNTAX      IpAddress
 1612          MAX-ACCESS  read-create
 1613          STATUS      current
 1614          DESCRIPTION
 1615                 "Secondary DHCP Server IP Address for the interface.
 1616                  This applies to the management interface and other
 1617                  dynamic interfaces."
 1618          ::= { agentInterfaceConfigEntry 10 }
 1619 
 1620     agentInterfaceDhcpProtocol OBJECT-TYPE
 1621          SYNTAX      INTEGER {
 1622                      disabled(0),
 1623                      enabled(1)
 1624                   }
 1625          MAX-ACCESS  read-create
 1626          STATUS      current
 1627          DESCRIPTION
 1628                      "The interface's DHCP protocol. This applies only
 1629                       to the service port interface."
 1630           ::= { agentInterfaceConfigEntry 11 }
 1631 
 1632     agentInterfaceDnsHostName OBJECT-TYPE
 1633          SYNTAX      DisplayString (SIZE(0..80))
 1634          MAX-ACCESS  read-create
 1635          STATUS      current
 1636          DESCRIPTION
 1637                      "The DNS host name for the Virtual Interface.
 1638                      This attribute is not valid for other
 1639                      interfaces."
 1640          ::= { agentInterfaceConfigEntry 12 }
 1641 
 1642     agentInterfaceAclName OBJECT-TYPE
 1643          SYNTAX      DisplayString (SIZE(0..32))
 1644          MAX-ACCESS  read-create
 1645          STATUS      current
 1646          DESCRIPTION
 1647                      "Name of the Access Control List applied to the
 1648                       interface. This attribute is applicable only to
 1649                       the management interface and other dynamic
 1650                       interfaces. If it is required to remove the ACL
 1651                       name for an interface, it should be set to an
 1652                       empty string."
 1653          ::= { agentInterfaceConfigEntry 13 }
 1654 
 1655     agentInterfaceAPManagementFeature OBJECT-TYPE
 1656          SYNTAX      INTEGER { disable(0), enable(1) }
 1657          MAX-ACCESS  read-create
 1658          STATUS      current
 1659          DESCRIPTION
 1660              "When enabled, the dynamic interface can be used for AP
 1661               management. SNMP support for AP management through
 1662               dynamic interfaces has been introduced since '3.0.21.0'
 1663               release.  Only applicable to dynamic interfaces in 4200
 1664               series. In static interfaces, 'disable' value 0
 1665               is returned. In 4000/3500 series of switches, 'disable'
 1666               value 0 is returned."
 1667          ::= { agentInterfaceConfigEntry 14 }
 1668 
 1669     agentInterfaceActivePortNo OBJECT-TYPE
 1670         SYNTAX Integer32(0..25)
 1671         MAX-ACCESS read-only
 1672         STATUS current
 1673         DESCRIPTION
 1674                 "This is the currently active port for this
 1675                 interface."
 1676         DEFVAL{ 0 }
 1677         ::= { agentInterfaceConfigEntry 15 }
 1678 
 1679     agentInterfaceBackupPortNo OBJECT-TYPE
 1680         SYNTAX Integer32(0..4)
 1681         MAX-ACCESS read-create
 1682         STATUS current
 1683         DESCRIPTION
 1684                 "This values is valid only for the 4200 series of
 1685                  switches. The backup port is the port this interface
 1686                  is moved to once the primary port fails.  A value 0
 1687                  means the port is not set.  The valid value can be
 1688                  any one of the physical ports on the 4200 switch."
 1689         DEFVAL{ 0 }
 1690         ::= { agentInterfaceConfigEntry 16 }
 1691 
 1692 agentInterfaceVlanQuarantine OBJECT-TYPE
 1693         SYNTAX     TruthValue
 1694         MAX-ACCESS read-create
 1695         STATUS     current
 1696         DESCRIPTION
 1697                 "This object is used to configure the health of the
 1698                 interface identified by agentInterfaceName.
 1699 
 1700                 A value of 'true' is used to indicate that this
 1701                 particular interface is unhealthy.  In this case,
 1702                 the data packets of the clients, that are assigned
 1703                 the VLAN Id corresponding to this interface, must
 1704                 be tunneled to the Controller by the REAP AP.
 1705 
 1706                 A value of 'false' indicates that the VLAN configured
 1707                 against the interface is healthy and that the REAP
 1708                 AP can switch the clients of this VLAN locally rather
 1709                 than tunneling them to the Controller. "
 1710         DEFVAL  { false }
 1711         ::= { agentInterfaceConfigEntry 17 }
 1712 
 1713     agentInterfaceRowStatus OBJECT-TYPE
 1714          SYNTAX    RowStatus
 1715          MAX-ACCESS  read-create
 1716          STATUS      current
 1717          DESCRIPTION
 1718                      "The interface entry Row status."
 1719          ::= { agentInterfaceConfigEntry 31 }
 1720 
 1721 
 1722 --********************************************************************
 1723 -- agentNtpConfigGroup - Configuration of Switch Network Time Protocol
 1724 --********************************************************************
 1725    agentNtpConfigGroup   OBJECT IDENTIFIER ::= { agentConfigGroup 14 }
 1726 
 1727     agentNtpPollingInterval OBJECT-TYPE
 1728          SYNTAX      Integer32(3600..604800)
 1729          MAX-ACCESS  read-write
 1730          STATUS      current
 1731          DESCRIPTION
 1732                "Network Time Protocol polling interval. Min value
 1733                 is one hour and maximum is a week."
 1734          ::= { agentNtpConfigGroup 1 }
 1735 
 1736 --********************************************************************
 1737 -- agentNtpServerTable - Configuration of Network Time Protocol Server
 1738 --********************************************************************
 1739 
 1740     agentNtpServerTable OBJECT-TYPE
 1741          SYNTAX      SEQUENCE OF AgentNtpServerEntry
 1742          MAX-ACCESS  not-accessible
 1743          STATUS      current
 1744          DESCRIPTION
 1745                      "A summary table for switch's lag config entries"
 1746          ::= { agentNtpConfigGroup 2 }
 1747 
 1748     agentNtpServerEntry OBJECT-TYPE
 1749          SYNTAX      AgentNtpServerEntry
 1750          MAX-ACCESS  not-accessible
 1751          STATUS      current
 1752          DESCRIPTION
 1753                      "Switch's NTP Server entry. Upto 4 entries may be
 1754                       added."
 1755          INDEX       { agentNtpServerIndex }
 1756          ::= { agentNtpServerTable 1 }
 1757 
 1758     AgentNtpServerEntry ::= SEQUENCE {
 1759              agentNtpServerIndex      Integer32,
 1760              agentNtpServerAddress    IpAddress,
 1761              agentNtpServerRowStatus  RowStatus
 1762              }
 1763 
 1764     agentNtpServerIndex OBJECT-TYPE
 1765          SYNTAX      Integer32(1..3)
 1766          MAX-ACCESS  read-create
 1767          STATUS      current
 1768          DESCRIPTION
 1769                      "NTP Server priority index."
 1770          ::= { agentNtpServerEntry 1 }
 1771 
 1772 
 1773     agentNtpServerAddress OBJECT-TYPE
 1774          SYNTAX      IpAddress
 1775          MAX-ACCESS  read-create
 1776          STATUS      current
 1777          DESCRIPTION
 1778                      "IP Address of the NTP Server"
 1779          ::= { agentNtpServerEntry 2 }
 1780 
 1781     agentNtpServerRowStatus OBJECT-TYPE
 1782          SYNTAX      RowStatus
 1783          MAX-ACCESS  read-create
 1784          STATUS      current
 1785          DESCRIPTION
 1786                      "NTP server entry row status."
 1787          ::= { agentNtpServerEntry 20 }
 1788 
 1789 
 1790 --********************************************************************
 1791 -- agentDhcpConfigGroup - Configuration of Switch DHCP Server and
 1792 --                        its Scopes
 1793 --********************************************************************
 1794   agentDhcpConfigGroup   OBJECT IDENTIFIER ::= { agentConfigGroup 15 }
 1795 
 1796     agentDhcpScopeTable OBJECT-TYPE
 1797          SYNTAX      SEQUENCE OF AgentDhcpScopeEntry
 1798          MAX-ACCESS  not-accessible
 1799          STATUS      current
 1800          DESCRIPTION
 1801                      "A table listing the Scopes defined on the
 1802                       switch's DHCP Server."
 1803          ::= { agentDhcpConfigGroup 1 }
 1804 
 1805     agentDhcpScopeEntry OBJECT-TYPE
 1806          SYNTAX      AgentDhcpScopeEntry
 1807          MAX-ACCESS  not-accessible
 1808          STATUS      current
 1809          DESCRIPTION
 1810                      "Switch's DHCP Server Scope entry."
 1811          INDEX       { agentDhcpScopeIndex }
 1812          ::= { agentDhcpScopeTable 1 }
 1813 
 1814     AgentDhcpScopeEntry ::= SEQUENCE {
 1815              agentDhcpScopeIndex                        Unsigned32,
 1816              agentDhcpScopeName                         DisplayString,
 1817              agentDhcpScopeLeaseTime                    Integer32,
 1818              agentDhcpScopeNetwork                      IpAddress,
 1819              agentDhcpScopeNetmask                      IpAddress,
 1820              agentDhcpScopePoolStartAddress             IpAddress,
 1821              agentDhcpScopePoolEndAddress               IpAddress,
 1822              agentDhcpScopeDefaultRouterAddress1        IpAddress,
 1823              agentDhcpScopeDefaultRouterAddress2        IpAddress,
 1824              agentDhcpScopeDefaultRouterAddress3        IpAddress,
 1825              agentDhcpScopeDnsDomainName                DisplayString,
 1826              agentDhcpScopeDnsServerAddress1            IpAddress,
 1827              agentDhcpScopeDnsServerAddress2            IpAddress,
 1828              agentDhcpScopeDnsServerAddress3            IpAddress,
 1829              agentDhcpScopeNetbiosNameServerAddress1    IpAddress,
 1830              agentDhcpScopeNetbiosNameServerAddress2    IpAddress,
 1831              agentDhcpScopeNetbiosNameServerAddress3    IpAddress,
 1832              agentDhcpScopeState                        INTEGER,
 1833              agentDhcpScopeRowStatus                    RowStatus
 1834              }
 1835 
 1836     agentDhcpScopeIndex OBJECT-TYPE
 1837          SYNTAX      Unsigned32(0..15)
 1838          MAX-ACCESS  read-create
 1839          STATUS      current
 1840          DESCRIPTION
 1841                      "DHCP Scope Identifier Index."
 1842          ::= { agentDhcpScopeEntry 1 }
 1843 
 1844     agentDhcpScopeName OBJECT-TYPE
 1845          SYNTAX      DisplayString(SIZE(1..79))
 1846          MAX-ACCESS  read-create
 1847          STATUS      current
 1848          DESCRIPTION
 1849                      "DHCP Scope Name."
 1850          ::= { agentDhcpScopeEntry 2 }
 1851 
 1852     agentDhcpScopeLeaseTime OBJECT-TYPE
 1853          SYNTAX      Integer32(120..8640000)
 1854          MAX-ACCESS  read-create
 1855          STATUS      current
 1856          DESCRIPTION
 1857                      "DHCP Scope Lease time in seconds."
 1858          ::= { agentDhcpScopeEntry 3 }
 1859 
 1860     agentDhcpScopeNetwork OBJECT-TYPE
 1861          SYNTAX      IpAddress
 1862          MAX-ACCESS  read-create
 1863          STATUS      current
 1864          DESCRIPTION
 1865                      "IP Address of the DHCP Scope Network. This is
 1866                      the address which is used to determine the DHCP
 1867                      scope a remote Switch is attaching to."
 1868          ::= { agentDhcpScopeEntry 4 }
 1869 
 1870     agentDhcpScopeNetmask OBJECT-TYPE
 1871          SYNTAX      IpAddress
 1872          MAX-ACCESS  read-create
 1873          STATUS      current
 1874          DESCRIPTION
 1875                      "The DHCP Scope Netmask. This the subnet mask for
 1876                       the address pool."
 1877          ::= { agentDhcpScopeEntry 5 }
 1878 
 1879     agentDhcpScopePoolStartAddress OBJECT-TYPE
 1880          SYNTAX      IpAddress
 1881          MAX-ACCESS  read-create
 1882          STATUS      current
 1883          DESCRIPTION
 1884                      "The DHCP Scope address pool start IP address."
 1885          ::= { agentDhcpScopeEntry 6 }
 1886 
 1887     agentDhcpScopePoolEndAddress OBJECT-TYPE
 1888          SYNTAX      IpAddress
 1889          MAX-ACCESS  read-create
 1890          STATUS      current
 1891          DESCRIPTION
 1892                      "The DHCP Scope address pool end IP address."
 1893          ::= { agentDhcpScopeEntry 7 }
 1894 
 1895     agentDhcpScopeDefaultRouterAddress1 OBJECT-TYPE
 1896          SYNTAX      IpAddress
 1897          MAX-ACCESS  read-create
 1898          STATUS      current
 1899          DESCRIPTION
 1900                      "IP Address of the DHCP Scope's default Router
 1901                      1."
 1902          ::= { agentDhcpScopeEntry 8 }
 1903 
 1904     agentDhcpScopeDefaultRouterAddress2 OBJECT-TYPE
 1905          SYNTAX      IpAddress
 1906          MAX-ACCESS  read-create
 1907          STATUS      current
 1908          DESCRIPTION
 1909                      "IP Address of the DHCP Scope's default Router
 1910                      2."
 1911          ::= { agentDhcpScopeEntry 9 }
 1912 
 1913     agentDhcpScopeDefaultRouterAddress3 OBJECT-TYPE
 1914          SYNTAX      IpAddress
 1915          MAX-ACCESS  read-create
 1916          STATUS      current
 1917          DESCRIPTION
 1918                      "IP Address of the DHCP Scope's default Router
 1919                      3."
 1920          ::= { agentDhcpScopeEntry 10 }
 1921 
 1922     agentDhcpScopeDnsDomainName OBJECT-TYPE
 1923          SYNTAX      DisplayString(SIZE(0..79))
 1924          MAX-ACCESS  read-create
 1925          STATUS      current
 1926          DESCRIPTION
 1927                      "DNS Domain name for the DHCP Scope."
 1928          ::= { agentDhcpScopeEntry 11 }
 1929 
 1930     agentDhcpScopeDnsServerAddress1 OBJECT-TYPE
 1931          SYNTAX      IpAddress
 1932          MAX-ACCESS  read-create
 1933          STATUS      current
 1934          DESCRIPTION
 1935                      "IP Address of the DHCP Scope's DNS Server 1."
 1936          ::= { agentDhcpScopeEntry 12 }
 1937 
 1938     agentDhcpScopeDnsServerAddress2 OBJECT-TYPE
 1939          SYNTAX      IpAddress
 1940          MAX-ACCESS  read-create
 1941          STATUS      current
 1942          DESCRIPTION
 1943                      "IP Address of the DHCP Scope's DNS Server 2."
 1944          ::= { agentDhcpScopeEntry 13 }
 1945 
 1946     agentDhcpScopeDnsServerAddress3 OBJECT-TYPE
 1947          SYNTAX      IpAddress
 1948          MAX-ACCESS  read-create
 1949          STATUS      current
 1950          DESCRIPTION
 1951                      "IP Address of the DHCP Scope's DNS Server 3."
 1952          ::= { agentDhcpScopeEntry 14 }
 1953 
 1954     agentDhcpScopeNetbiosNameServerAddress1 OBJECT-TYPE
 1955          SYNTAX      IpAddress
 1956          MAX-ACCESS  read-create
 1957          STATUS      current
 1958          DESCRIPTION
 1959                      "IP Address of DHCP Scope's Netbios Name Server
 1960                      1."
 1961          ::= { agentDhcpScopeEntry 15 }
 1962 
 1963     agentDhcpScopeNetbiosNameServerAddress2 OBJECT-TYPE
 1964          SYNTAX      IpAddress
 1965          MAX-ACCESS  read-create
 1966          STATUS      current
 1967          DESCRIPTION
 1968                      "IP Address of DHCP Scope's Netbios Name Server
 1969                      2."
 1970          ::= { agentDhcpScopeEntry 16 }
 1971 
 1972     agentDhcpScopeNetbiosNameServerAddress3 OBJECT-TYPE
 1973          SYNTAX      IpAddress
 1974          MAX-ACCESS  read-create
 1975          STATUS      current
 1976          DESCRIPTION
 1977                      "IP Address of DHCP Scope's Netbios Name Server
 1978                      3."
 1979          ::= { agentDhcpScopeEntry 17 }
 1980 
 1981     agentDhcpScopeState OBJECT-TYPE
 1982          SYNTAX  INTEGER {
 1983                      disable(0),
 1984                      enable(1)
 1985                  }
 1986          MAX-ACCESS  read-create
 1987          STATUS      current
 1988          DESCRIPTION
 1989                       "DHCP Scope's State."
 1990          ::= { agentDhcpScopeEntry 18 }
 1991 
 1992     agentDhcpScopeRowStatus OBJECT-TYPE
 1993          SYNTAX      RowStatus
 1994          MAX-ACCESS  read-create
 1995          STATUS      current
 1996          DESCRIPTION
 1997                      "Dhcp Scope entry row status."
 1998          ::= { agentDhcpScopeEntry 30 }
 1999 
 2000 
 2001 --********************************************************************
 2002 -- agentServicePortConfigGroup
 2003 -- (Interface of type service-port in agentInterfaceConfigTable
 2004 --        use is recommended instead of this group.)
 2005 --********************************************************************
 2006 
 2007     agentServicePortConfigGroup  OBJECT IDENTIFIER ::=
 2008                                            { agentConfigGroup 4 }
 2009 
 2010     agentServicePortIPAddress OBJECT-TYPE
 2011          SYNTAX      IpAddress
 2012          MAX-ACCESS  read-write
 2013          STATUS      obsolete
 2014          DESCRIPTION
 2015                      "The switch's Service Port IP address.
 2016                       (Service-port interface use is recommended
 2017                       instead
 2018                        of this group)"
 2019          ::= { agentServicePortConfigGroup 1 }
 2020 
 2021     agentServicePortSubnetMask OBJECT-TYPE
 2022          SYNTAX      IpAddress
 2023          MAX-ACCESS  read-write
 2024          STATUS      obsolete
 2025          DESCRIPTION
 2026                      "The switch's Service Port subnet mask.
 2027                       (Service-port interface in
 2028                        agentInterfaceConfigTable is recommended
 2029                        instead
 2030                        of this group)"
 2031          ::= { agentServicePortConfigGroup 2 }
 2032 
 2033     agentServicePortDefaultGateway OBJECT-TYPE
 2034          SYNTAX      IpAddress
 2035          MAX-ACCESS  read-write
 2036          STATUS      obsolete
 2037          DESCRIPTION
 2038                      "Not Supported for release 1.0.  The switch's
 2039                       Service Port default gateway.  (Service-port
 2040                       interface in agentInterfaceConfigTable is
 2041                       recommended instead of this group)"
 2042          ::= { agentServicePortConfigGroup 3 }
 2043 
 2044     agentServicePortBurnedInMacAddress OBJECT-TYPE
 2045          SYNTAX      PhysAddress
 2046          MAX-ACCESS  read-only
 2047          STATUS      obsolete
 2048          DESCRIPTION
 2049                      "The switch's Service Port Burned-In MAC address
 2050                       (Service-port interface in
 2051                        agentInterfaceConfigTable is recommended
 2052                        instead
 2053                        of this group)"
 2054          ::= { agentServicePortConfigGroup 4 }
 2055 
 2056     agentServicePortConfigProtocol OBJECT-TYPE
 2057          SYNTAX      INTEGER {
 2058                      none(1),
 2059                      dhcp(3)
 2060                   }
 2061          MAX-ACCESS  read-write
 2062          STATUS      obsolete
 2063          DESCRIPTION
 2064                      "The switch's Service Port config protocol
 2065                       (Service-port interface in
 2066                        agentInterfaceConfigTable is recommended
 2067                        instead
 2068                        of this group)"
 2069           ::= { agentServicePortConfigGroup 5 }
 2070 
 2071 
 2072 --********************************************************************
 2073 -- agentSnmpConfigGroup
 2074 --********************************************************************
 2075 
 2076     agentSnmpConfigGroup  OBJECT IDENTIFIER  ::=  {agentConfigGroup 5}
 2077 
 2078 
 2079     agentSnmpTrapPortNumber OBJECT-TYPE
 2080          SYNTAX  Unsigned32(1..65534)
 2081          MAX-ACCESS  read-write
 2082          STATUS      current
 2083          DESCRIPTION
 2084         "Snmp Trap Port Number"
 2085          ::= { agentSnmpConfigGroup 1 }
 2086 
 2087     agentSnmpVersion1Status OBJECT-TYPE
 2088          SYNTAX  INTEGER{disable(0),enable(1)}
 2089          MAX-ACCESS  read-write
 2090          STATUS      current
 2091          DESCRIPTION
 2092         "Snmp Version 1 Status"
 2093          ::= { agentSnmpConfigGroup 2 }
 2094 
 2095     agentSnmpVersion2cStatus OBJECT-TYPE
 2096          SYNTAX  INTEGER{disable(0),enable(1)}
 2097          MAX-ACCESS  read-write
 2098          STATUS      current
 2099          DESCRIPTION
 2100         "Snmp Version 2c Status"
 2101          ::= { agentSnmpConfigGroup 3 }
 2102 
 2103 
 2104 --********************************************************************
 2105 -- agentSnmpCommunityConfigTable
 2106 --********************************************************************
 2107     agentSnmpCommunityConfigTable OBJECT-TYPE
 2108          SYNTAX      SEQUENCE OF AgentSnmpCommunityConfigEntry
 2109          MAX-ACCESS  not-accessible
 2110          STATUS      current
 2111          DESCRIPTION
 2112                      "A table of the switch's SNMP community Config
 2113                       entries"
 2114          ::= { agentSnmpConfigGroup 5 }
 2115 
 2116     agentSnmpCommunityConfigEntry OBJECT-TYPE
 2117          SYNTAX      AgentSnmpCommunityConfigEntry
 2118          MAX-ACCESS  not-accessible
 2119          STATUS      current
 2120          DESCRIPTION
 2121                      "Switch's SNMP community Config entry"
 2122          INDEX       {agentSnmpCommunityName }
 2123          ::= { agentSnmpCommunityConfigTable 1 }
 2124 
 2125     AgentSnmpCommunityConfigEntry ::= SEQUENCE {
 2126            agentSnmpCommunityName         DisplayString,
 2127            agentSnmpCommunityIPAddress    IpAddress,
 2128            agentSnmpCommunityIPMask       IpAddress,
 2129            agentSnmpCommunityAccessMode   INTEGER,
 2130            agentSnmpCommunityEnabled      INTEGER,
 2131            agentSnmpCommunityStatus       RowStatus
 2132        }
 2133 
 2134     agentSnmpCommunityName OBJECT-TYPE
 2135          SYNTAX      DisplayString (SIZE (1..16))
 2136          MAX-ACCESS  read-create
 2137          STATUS      current
 2138          DESCRIPTION
 2139                      "The switch's Snmp Community Name
 2140                      This name identifies each SNMP community;
 2141                      the name can be up to 16 characters, and it is
 2142                      case-sensitive. Community names in the SNMP
 2143                      community must be unique.  If you make multiple
 2144                      entries using the same community name, the first
 2145                      entry is kept and processed and all duplicate
 2146                      entries are ignored. "
 2147          ::= { agentSnmpCommunityConfigEntry 1 }
 2148 
 2149     agentSnmpCommunityIPAddress OBJECT-TYPE
 2150          SYNTAX      IpAddress
 2151          MAX-ACCESS  read-create
 2152          STATUS      current
 2153          DESCRIPTION
 2154                      "The switch's Snmp Community IP Address
 2155                      Client IP Address - This attribute is an IP
 2156                      address (or portion thereof) from which this
 2157                      device will accept SNMP packets with the
 2158                      associated community. The requesting entity's IP
 2159                      address is logical-ANDed with the Client IP Mask
 2160                      and the result must match the Client IP Address.
 2161                      Note: If the Client IP Mask is set to 0.0.0.0, a
 2162                      Client IP Address of 0.0.0.0 matches all IP
 2163                      addresses."
 2164          ::= { agentSnmpCommunityConfigEntry 2 }
 2165 
 2166     agentSnmpCommunityIPMask OBJECT-TYPE
 2167          SYNTAX      IpAddress
 2168          MAX-ACCESS  read-create
 2169          STATUS      current
 2170          DESCRIPTION
 2171                     "The switch's Snmp Community
 2172                      IP Mask Client IP Mask - This attribute is a mask
 2173                      to be logical-ANDed with the requesting entity's
 2174                      IP address before comparison with the Client IP
 2175                      Address. If the result matches with Client IP
 2176                      Address then the address is an authenticated IP
 2177                      address. For example, if the Client IP Address
 2178                      is 9.47.128.0 and the corresponding Client IP
 2179                      Mask is 255.255.255.0, a range of incoming IP
 2180                      addresses would match, that is, the incoming IP
 2181                      addresses could be a value in the following
 2182                      range: 9.47.128.0 to 9.47.128.255.  To have a
 2183                      specific IP address be the only authenticated IP
 2184                      address, set the Client IP Address to the
 2185                      required IP address and set the Client IP Mask to
 2186                      255.255.255.255."
 2187          ::= { agentSnmpCommunityConfigEntry 3 }
 2188 
 2189     agentSnmpCommunityAccessMode OBJECT-TYPE
 2190          SYNTAX      INTEGER {
 2191                      readOnly(1),
 2192                      readWrite(2)
 2193                   }
 2194          MAX-ACCESS  read-create
 2195          STATUS      current
 2196          DESCRIPTION
 2197                      "The switch's Snmp Community Access Mode
 2198                      Access Mode - This value can be readOnly or
 2199                      readWrite.  A community with a read-only access
 2200                      allows for switch information to be displayed.
 2201                      A community with a readWrite access allows for
 2202                      configuration changes to be made and for
 2203                      information to be displayed. "
 2204          DEFVAL {readOnly}
 2205          ::= { agentSnmpCommunityConfigEntry 4 }
 2206 
 2207     agentSnmpCommunityEnabled OBJECT-TYPE
 2208          SYNTAX      INTEGER { no(0), yes(1) }
 2209          MAX-ACCESS  read-create
 2210          STATUS      current
 2211          DESCRIPTION
 2212                    "If community is Enabled  "
 2213     DEFVAL { no }
 2214          ::= { agentSnmpCommunityConfigEntry 5 }
 2215 
 2216     agentSnmpCommunityStatus OBJECT-TYPE
 2217          SYNTAX    RowStatus
 2218          MAX-ACCESS  read-create
 2219          STATUS      current
 2220          DESCRIPTION
 2221                      "The switch's Snmp Community Status.
 2222                      active(1)        - This community is active,
 2223                                         allowing SNMP manager
 2224                                         associated
 2225                                         with this community to manage
 2226                                         the switch according to its
 2227                                         access right.
 2228 
 2229                      notInService(2)  - This community is not active;
 2230                      no
 2231                                         SNMP requests using this
 2232                                         community will be accepted. In
 2233                                         this case the SNMP manager
 2234                                         associated with this community
 2235                                         cannot manage the switch until
 2236                                         the Status is changed back to
 2237                                         active(1).
 2238 
 2239                      config(3)        - The community Status must be
 2240                                         set to this value in order to
 2241                                         configure it.  When creating a
 2242                                         new community entry, initial
 2243                                         Status will be set to this
 2244                                         value.
 2245 
 2246                      destroy(4)       - Set to this value to remove
 2247                      the
 2248                                         community from the agent."
 2249          ::= { agentSnmpCommunityConfigEntry 25 }
 2250 
 2251 
 2252 --********************************************************************
 2253 -- agentSnmpTrapReceiverConfigTable
 2254 --********************************************************************
 2255 
 2256     agentSnmpTrapReceiverConfigTable OBJECT-TYPE
 2257          SYNTAX      SEQUENCE OF AgentSnmpTrapReceiverConfigEntry
 2258          MAX-ACCESS  not-accessible
 2259          STATUS      current
 2260          DESCRIPTION
 2261                 "Trap messages are sent across a network to an SNMP
 2262                  Network Manager. These messages alert the manager to
 2263                  events occurring within the switch or on the network.
 2264                  Up to six simultaneous trap receivers are supported."
 2265          ::= { agentSnmpConfigGroup 6 }
 2266 
 2267     agentSnmpTrapReceiverConfigEntry OBJECT-TYPE
 2268          SYNTAX      AgentSnmpTrapReceiverConfigEntry
 2269          MAX-ACCESS  not-accessible
 2270          STATUS      current
 2271          DESCRIPTION
 2272                 "Switch's Snmp Trap Receiver Config entry"
 2273          INDEX   { agentSnmpTrapReceiverName }
 2274          ::= { agentSnmpTrapReceiverConfigTable 1 }
 2275 
 2276     AgentSnmpTrapReceiverConfigEntry ::= SEQUENCE {
 2277            agentSnmpTrapReceiverName       OCTET STRING,
 2278            agentSnmpTrapReceiverIPAddress  IpAddress,
 2279            agentSnmpTrapReceiverEnabled    INTEGER,
 2280            agentSnmpTrapReceiverStatus     RowStatus
 2281        }
 2282 
 2283     agentSnmpTrapReceiverName OBJECT-TYPE
 2284          SYNTAX      OCTET STRING (SIZE(1..16))
 2285          MAX-ACCESS  read-create
 2286          STATUS      current
 2287          DESCRIPTION
 2288                      "The switch's Snmp Trap Receiver Name.
 2289                      This is the name of the remote network manager.
 2290                      the name can be up to 16 characters,
 2291                      and is case-sensitive."
 2292          ::= { agentSnmpTrapReceiverConfigEntry 1 }
 2293 
 2294     agentSnmpTrapReceiverIPAddress OBJECT-TYPE
 2295          SYNTAX      IpAddress
 2296          MAX-ACCESS  read-create
 2297          STATUS      current
 2298          DESCRIPTION
 2299                      "SNMP network Manager IP Address. The  IP Address
 2300                      traps will be sent to. Each IP address parameter
 2301                      is four  integer numbers.  The numbers range from
 2302                      0 to 255.  After creation of entry IP Address
 2303                      cannot be changed."
 2304          ::= { agentSnmpTrapReceiverConfigEntry 2 }
 2305 
 2306     agentSnmpTrapReceiverEnabled OBJECT-TYPE
 2307          SYNTAX      INTEGER{no(0),yes(1)}
 2308          MAX-ACCESS  read-create
 2309          STATUS      current
 2310          DESCRIPTION
 2311                      "The flag to enable the trap receiver. If
 2312                       disabled, no traps are sent to this receiver's
 2313                       IP Address. "
 2314          DEFVAL{ no }
 2315          ::= { agentSnmpTrapReceiverConfigEntry 3 }
 2316 
 2317     agentSnmpTrapReceiverStatus OBJECT-TYPE
 2318          SYNTAX   RowStatus
 2319          MAX-ACCESS  read-create
 2320          STATUS      current
 2321          DESCRIPTION
 2322                 "This object is used to create and delete instances
 2323                 of this table.
 2324                 The row, when created with the row status value
 2325                 of 'createAndGo' or 'createAndWait' is moved to the
 2326                 'active' state automatically by the agent and remains
 2327                 in that state till the time the row is removed through
 2328                 the 'destroy' option."
 2329          ::= { agentSnmpTrapReceiverConfigEntry 23 }
 2330 
 2331 --********************************************************************
 2332 -- agentSnmpTrapFlagsConfigGroup
 2333 --********************************************************************
 2334 
 2335     agentSnmpTrapFlagsConfigGroup OBJECT IDENTIFIER ::=
 2336                                     { agentSnmpConfigGroup 7  }
 2337 
 2338     agentSnmpAuthenticationTrapFlag OBJECT-TYPE
 2339          SYNTAX      INTEGER {
 2340                      enable(1),
 2341                      disable(2)
 2342                   }
 2343          MAX-ACCESS  read-write
 2344          STATUS      current
 2345          DESCRIPTION
 2346                      "Authentication Flag - Enable/Disable
 2347                       authentication Flag."
 2348          ::= { agentSnmpTrapFlagsConfigGroup 1 }
 2349 
 2350     agentSnmpLinkUpDownTrapFlag OBJECT-TYPE
 2351          SYNTAX      INTEGER {
 2352                      enable(1),
 2353                      disable(2)
 2354                   }
 2355          MAX-ACCESS  read-write
 2356          STATUS      current
 2357          DESCRIPTION
 2358                      "Link Up/Down Flag - Enable/Disable Link Up/Link
 2359                       Down traps for the entire switch. When set to
 2360                       Enable, the Link Up/Down traps will be sent only
 2361                       if the Link Trap flag setting associated with
 2362                       the port (Port Configuration Menu) is set to
 2363                       Enable."
 2364          ::= { agentSnmpTrapFlagsConfigGroup 2 }
 2365 
 2366     agentSnmpMultipleUsersTrapFlag OBJECT-TYPE
 2367          SYNTAX      INTEGER {
 2368                      enable(1),
 2369                      disable(2)
 2370                   }
 2371          MAX-ACCESS  read-write
 2372          STATUS      current
 2373          DESCRIPTION
 2374                      "Multiple Users Flag - Enable/Disable Multiple
 2375                      User traps. When the value is set to Enable, a
 2376                      Multiple User Trap is sent whenever someone logs
 2377                      in to the terminal interface (EIA 232 or Telnet)
 2378                      and there is already an existing terminal
 2379                      interface session"
 2380          ::= { agentSnmpTrapFlagsConfigGroup 3 }
 2381 
 2382     agentSnmpSpanningTreeTrapFlag OBJECT-TYPE
 2383          SYNTAX      INTEGER {
 2384                      enable(1),
 2385                      disable(2)
 2386                   }
 2387          MAX-ACCESS  read-write
 2388          STATUS      current
 2389          DESCRIPTION
 2390                      "Spanning Tree Flag - This flag enables the
 2391                       sending of new root traps and topology change
 2392                       notification traps."
 2393          ::= { agentSnmpTrapFlagsConfigGroup 4 }
 2394 
 2395     agentSnmpBroadcastStormTrapFlag OBJECT-TYPE
 2396          SYNTAX      INTEGER {
 2397                      enable(1),
 2398                      disable(2)
 2399                   }
 2400          MAX-ACCESS  read-write
 2401          STATUS      obsolete
 2402          DESCRIPTION
 2403                      "Broadcast Storm Flag - This flag enables or
 2404                      disables the broadcast storm trap. You must also
 2405                      enable Broadcast Storm Recovery Mode
 2406                      (see the Switch Configuration Menu). When this
 2407                      value is set to Enable and Broadcast Storm
 2408                      Recovery mode is set to Enable, the Broadcast
 2409                      Storm Start/End traps are sent when the switch
 2410                      enters and leaves Broadcast Storm Recovery."
 2411          ::= { agentSnmpTrapFlagsConfigGroup 5 }
 2412 
 2413 --********************************************************************
 2414 -- agentSnmpV3ConfigGroup
 2415 --********************************************************************
 2416 
 2417  agentSnmpV3ConfigGroup   OBJECT IDENTIFIER  ::=  {agentConfigGroup 6}
 2418 
 2419 
 2420     agentSnmpVersion3Status OBJECT-TYPE
 2421          SYNTAX  INTEGER{disable(0),enable(1)}
 2422          MAX-ACCESS  read-write
 2423          STATUS      current
 2424          DESCRIPTION
 2425         "Snmp Version 3 Status"
 2426          ::= { agentSnmpV3ConfigGroup 1 }
 2427 
 2428 --********************************************************************
 2429 -- agentSnmpV3UserConfigTable
 2430 --********************************************************************
 2431 
 2432     agentSnmpV3UserConfigTable OBJECT-TYPE
 2433          SYNTAX      SEQUENCE OF AgentSnmpV3UserConfigEntry
 2434          MAX-ACCESS  not-accessible
 2435          STATUS      current
 2436          DESCRIPTION
 2437                      "User Config Table. Only creation and deletion of
 2438                       users is supported.  All individual updates are
 2439                       not supported."
 2440          ::= { agentSnmpV3ConfigGroup 2 }
 2441 
 2442     agentSnmpV3UserConfigEntry OBJECT-TYPE
 2443          SYNTAX      AgentSnmpV3UserConfigEntry
 2444          MAX-ACCESS  not-accessible
 2445          STATUS      current
 2446          DESCRIPTION
 2447                      "User Config Entry"
 2448          INDEX { agentSnmpV3UserName }
 2449          ::= { agentSnmpV3UserConfigTable 1 }
 2450 
 2451     AgentSnmpV3UserConfigEntry ::= SEQUENCE {
 2452                  agentSnmpV3UserName                    OCTET STRING,
 2453                  agentSnmpV3UserAccessMode              INTEGER,
 2454                  agentSnmpV3UserAuthenticationType      INTEGER,
 2455                  agentSnmpV3UserEncryptionType          INTEGER,
 2456                  agentSnmpV3UserAuthenticationPassword  OCTET STRING,
 2457                  agentSnmpV3UserEncryptionPassword      OCTET STRING,
 2458                  agentSnmpV3UserStatus                  RowStatus
 2459              }
 2460 
 2461     agentSnmpV3UserName OBJECT-TYPE
 2462          SYNTAX      OCTET STRING (SIZE(1..32))
 2463          MAX-ACCESS  read-create
 2464          STATUS      current
 2465          DESCRIPTION
 2466                      "Agent User Name."
 2467          ::= { agentSnmpV3UserConfigEntry 1 }
 2468 
 2469     agentSnmpV3UserAccessMode OBJECT-TYPE
 2470          SYNTAX      INTEGER {
 2471                      readonly(1),
 2472                      readwrite(2)
 2473                   }
 2474          MAX-ACCESS  read-create
 2475          STATUS      current
 2476          DESCRIPTION
 2477                      "Agent User Access Mode"
 2478          ::= { agentSnmpV3UserConfigEntry 2 }
 2479 
 2480 
 2481     agentSnmpV3UserAuthenticationType OBJECT-TYPE
 2482          SYNTAX      INTEGER {
 2483                      none(1),
 2484                      hmacmd5(2),
 2485                      hmacsha(3)
 2486                   }
 2487          MAX-ACCESS  read-create
 2488          STATUS      current
 2489          DESCRIPTION
 2490                      "SNMPv3 User Authentication
 2491                      none(1)      - no authentication used
 2492                      hmacmd5(1)   - Use HMAC-MD5 authentication
 2493                      hmacsha(1)   - Use HMAC-SHA authentication"
 2494          ::= { agentSnmpV3UserConfigEntry 3 }
 2495 
 2496     agentSnmpV3UserEncryptionType OBJECT-TYPE
 2497          SYNTAX      INTEGER {
 2498                      none(1),
 2499                      des(2)
 2500                   }
 2501          MAX-ACCESS  read-create
 2502          STATUS      current
 2503          DESCRIPTION
 2504                      "SNMPv3 User Encryption Must be set to none(1) if
 2505                      agentSnmpV3UserAuthenticationType is set to
 2506                      none(1).  Setting this object will set the
 2507                      encryption password to an empty string.
 2508                      none(1) - no encryption used
 2509                      des(1)  - DES encryption used"
 2510          ::= { agentSnmpV3UserConfigEntry 4 }
 2511 
 2512     agentSnmpV3UserAuthenticationPassword OBJECT-TYPE
 2513          SYNTAX      OCTET STRING (SIZE(0..32))
 2514          MAX-ACCESS  read-create
 2515          STATUS      current
 2516          DESCRIPTION
 2517                      "SNMPv3 User Encryption Password"
 2518          ::= { agentSnmpV3UserConfigEntry 5 }
 2519 
 2520     agentSnmpV3UserEncryptionPassword OBJECT-TYPE
 2521          SYNTAX      OCTET STRING (SIZE(0..32))
 2522          MAX-ACCESS  read-create
 2523          STATUS      current
 2524          DESCRIPTION
 2525                      "SNMPv3 User Encryption Password"
 2526          ::= { agentSnmpV3UserConfigEntry 6 }
 2527 
 2528     agentSnmpV3UserStatus OBJECT-TYPE
 2529          SYNTAX      RowStatus
 2530          MAX-ACCESS  read-create
 2531          STATUS      current
 2532          DESCRIPTION
 2533                      "Agent User Status.
 2534                      active(1)  - This user account is active.
 2535                      destroy(6) - Set to this value to remove this
 2536                      user account."
 2537          ::= { agentSnmpV3UserConfigEntry 26 }
 2538 
 2539 
 2540 --********************************************************************
 2541 -- agentSpanningTreePortTable
 2542 --********************************************************************
 2543     agentSpanningTreeConfigGroup  OBJECT IDENTIFIER ::=
 2544                                        { agentConfigGroup 7 }
 2545 
 2546 
 2547     agentSpanningTreeMode OBJECT-TYPE
 2548          SYNTAX      INTEGER {
 2549                      enable(1),
 2550                      disable(2)
 2551                   }
 2552          MAX-ACCESS  read-write
 2553          STATUS      current
 2554          DESCRIPTION
 2555                      "The switch's Spanning Tree Switch Status"
 2556          ::= { agentSpanningTreeConfigGroup 1 }
 2557 
 2558 
 2559 --********************************************************************
 2560 -- agentSwitchConfigGroup
 2561 --********************************************************************
 2562 
 2563     agentSwitchConfigGroup  OBJECT IDENTIFIER ::= { agentConfigGroup 8
 2564     }
 2565 
 2566     agentSwitchAddressAgingTimeoutTable OBJECT-TYPE
 2567          SYNTAX      SEQUENCE OF AgentSwitchAddressAgingTimeoutEntry
 2568          MAX-ACCESS  not-accessible
 2569          STATUS      current
 2570          DESCRIPTION
 2571                      "The switch's address aging timeout table"
 2572          ::= { agentSwitchConfigGroup 4 }
 2573 
 2574     agentSwitchAddressAgingTimeoutEntry OBJECT-TYPE
 2575          SYNTAX      AgentSwitchAddressAgingTimeoutEntry
 2576          MAX-ACCESS  not-accessible
 2577          STATUS      current
 2578          DESCRIPTION
 2579                      "Aging information about a specific Filtering
 2580                       Database."
 2581          INDEX       { dot1qFdbId }
 2582          ::= { agentSwitchAddressAgingTimeoutTable 1 }
 2583 
 2584     AgentSwitchAddressAgingTimeoutEntry ::=
 2585          SEQUENCE {
 2586              agentSwitchAddressAgingTimeout
 2587                  Integer32
 2588          }
 2589 
 2590     agentSwitchAddressAgingTimeout OBJECT-TYPE
 2591          SYNTAX   Integer32 (10..1000000)
 2592          MAX-ACCESS  read-write
 2593          STATUS      current
 2594          DESCRIPTION
 2595                      "The FDB entry's address aging timeout(in
 2596                      seconds)"
 2597          DEFVAL { 300 }
 2598          ::= { agentSwitchAddressAgingTimeoutEntry 10 }
 2599 
 2600     agentSwitchBroadcastControlMode OBJECT-TYPE
 2601          SYNTAX      INTEGER {
 2602                      enable(1),
 2603                      disable(2)
 2604                   }
 2605          MAX-ACCESS  read-write
 2606          STATUS      current
 2607          DESCRIPTION
 2608                      "The switch config broadcast allows you to enable
 2609                       or disable broadcast storm recovery mode. When
 2610                       you specify Enable for Broadcast Storm Recovery
 2611                       and the broadcast traffic on any Ethernet port
 2612                       exceeds 20 percent of the link speed, the switch
 2613                       blocks (discards) the broadcast traffic until
 2614                       the broadcast traffic returns to 10 percent or
 2615                       less.Upper limit for 10M link is 20% and lower
 2616                       limit is 10%.  For 100M link Upper limit is 5%
 2617                       and lower limit is 2%"
 2618          ::= { agentSwitchConfigGroup 2 }
 2619 
 2620     agentSwitchDot3FlowControlMode OBJECT-TYPE
 2621          SYNTAX      INTEGER {
 2622                      enable(1),
 2623                      disable(2)
 2624                   }
 2625          MAX-ACCESS  read-write
 2626          STATUS      current
 2627          DESCRIPTION
 2628                      "Config switchconfig flowcontrol allows you to
 2629                       enable or disable 802.3x flow control for the
 2630                       switch. This value applies to only full-duplex
 2631                       mode ports. "
 2632          ::= { agentSwitchConfigGroup 3 }
 2633 
 2634     agentSwitchLwappTransportMode OBJECT-TYPE
 2635          SYNTAX      INTEGER {
 2636                      layer2(1),
 2637                      layer3(2)
 2638                   }
 2639          MAX-ACCESS  read-write
 2640          STATUS      current
 2641          DESCRIPTION
 2642                      "The LWAPP transport mode decides if the switch
 2643                       is operating in the Layer2 or Layer3 mode.
 2644                       The switch needs to be rebooted for the mode
 2645                       change to take effect."
 2646          ::= { agentSwitchConfigGroup 5 }
 2647 
 2648 
 2649 --********************************************************************
 2650 -- agentTransferConfigGroup
 2651 --********************************************************************
 2652 
 2653     agentTransferConfigGroup    OBJECT IDENTIFIER ::=
 2654                                        { agentConfigGroup 9 }
 2655 
 2656 
 2657 --*******************************************************************
 2658 -- agentTransferUploadGroup
 2659 --*******************************************************************
 2660 
 2661     agentTransferUploadGroup    OBJECT IDENTIFIER ::=
 2662                                 { agentTransferConfigGroup 1 }
 2663 
 2664     agentTransferUploadMode OBJECT-TYPE
 2665          SYNTAX      INTEGER {
 2666                      tftp(1),
 2667                      xmodem(2),
 2668                      ymodem(3),
 2669                      zmodem(4)
 2670                   }
 2671          MAX-ACCESS  read-write
 2672          STATUS      current
 2673          DESCRIPTION
 2674                      "Transfer upload mode configures the mode to use
 2675                       when uploading from the switch. The mode is
 2676                       either X/Y/ZMODEM or TFTP. X/Y/ZMODEM is valid
 2677                       only when the file transfer is initiated by the
 2678                       serial EIA 232 port."
 2679          ::= { agentTransferUploadGroup 1 }
 2680 
 2681     agentTransferUploadServerIP OBJECT-TYPE
 2682          SYNTAX      IpAddress
 2683          MAX-ACCESS  read-write
 2684          STATUS      current
 2685          DESCRIPTION
 2686                      "Transfer upload tftpserverip configures the IP
 2687                       address of the server where the file will be
 2688                       uploaded. It is valid only when the Transfer
 2689                       Mode is TFTP. The address is 4 integer bytes
 2690                       ranging from 0 to 255."
 2691          ::= { agentTransferUploadGroup 2 }
 2692 
 2693     agentTransferUploadPath OBJECT-TYPE
 2694          SYNTAX      DisplayString (SIZE(0..63))
 2695          MAX-ACCESS  read-write
 2696          STATUS      current
 2697          DESCRIPTION
 2698                      "Transfer upload tftppath configures the
 2699                      directory
 2700                       path where the file is to be uploaded to. The
 2701                       switch remembers the last file path used."
 2702          ::= { agentTransferUploadGroup 3 }
 2703 
 2704     agentTransferUploadFilename OBJECT-TYPE
 2705          SYNTAX      DisplayString (SIZE(0..63))
 2706          MAX-ACCESS  read-write
 2707          STATUS      current
 2708          DESCRIPTION
 2709                      "Transfer upload tftpfilename configures the
 2710                       file name for the file being uploaded from the
 2711                       switch. It can be up to 32 alphanumeric
 2712                       characters. The switch remembers the last file
 2713                       name used. File path can be appended to the file
 2714                       name if the string is less than 17 characters.
 2715                       Otherwise, the File Path field will need to be
 2716                       used and the File Name will be appended to the
 2717                       File Path as is. An example would be File Path
 2718                       set to c:\tftp\code\ and File Name set to
 2719                       e1r1v1.opr.
 2720                       Note: File Name, File Path, and TFTP Server IP
 2721                       Address are applicable only if the Transfer Mode
 2722                       is TFTP."
 2723          ::= { agentTransferUploadGroup 4 }
 2724 
 2725     agentTransferUploadDataType OBJECT-TYPE
 2726          SYNTAX      INTEGER {
 2727                       config(2),
 2728                       errorlog(3),
 2729                       systemtrace(4),
 2730                       traplog(5),
 2731                       crashfile(6),
 2732                       signatures(7),
 2733                       unknown(99)
 2734                     }
 2735          MAX-ACCESS  read-write
 2736          STATUS      current
 2737          DESCRIPTION
 2738                      "Transfer upload datatype configures the type of
 2739                       file to upload from the switch.
 2740                       The types for upload are:
 2741                         -   Configuration File
 2742                         -   Error log
 2743                         -   System trace
 2744                         -   Trap log
 2745                         -   Crash File
 2746                      "
 2747          ::= { agentTransferUploadGroup 5 }
 2748 
 2749 
 2750     agentTransferUploadStart OBJECT-TYPE
 2751          SYNTAX      INTEGER {
 2752                      enable(1),
 2753                      disable(2)
 2754                   }
 2755          MAX-ACCESS  read-write
 2756          STATUS      current
 2757          DESCRIPTION
 2758                      "Transfer upload start will start an upload
 2759                       transfer. The agentTransferUploadMode object
 2760                       must not be set to xmodem(2), ymodem(3), or
 2761                       zmodem(4) to initiate a transfer via SNMP."
 2762          ::= { agentTransferUploadGroup 6 }
 2763 
 2764     agentTransferUploadStatus OBJECT-TYPE
 2765          SYNTAX      INTEGER {
 2766                      notInitiated(1),
 2767                      transferStarting(2),
 2768                      errorStarting(3),
 2769                      wrongFileType(4),
 2770                      updatingConfig(5),
 2771                      invalidConfigFile(6),
 2772                      writingToFlash(7),
 2773                      failureWritingToFlash(8),
 2774                      checkingCRC(9),
 2775                      failedCRC(10),
 2776                      unknownDirection(11),
 2777                      transferSuccessful(12),
 2778                      transferFailed(13),
 2779                      unknown(99)
 2780                   }
 2781          MAX-ACCESS  read-only
 2782          STATUS      current
 2783          DESCRIPTION
 2784                      "Indicates the current status of an upload
 2785                       transfer."
 2786          ::= { agentTransferUploadGroup 7 }
 2787 
 2788     agentTransferConfigurationFileEncryption OBJECT-TYPE
 2789          SYNTAX      INTEGER {
 2790                      disable(0),
 2791                      enable(1)
 2792                   }
 2793          MAX-ACCESS  read-write
 2794          STATUS      current
 2795          DESCRIPTION
 2796                      "The configuration file can be encrypted before
 2797                       tftp upload from the switch and then decrypted
 2798                       before downloading to the switch when this
 2799                       option is enabled."
 2800          ::= { agentTransferConfigGroup 3 }
 2801 
 2802     agentTransferConfigurationFileEncryptionKey OBJECT-TYPE
 2803          SYNTAX      DisplayString(SIZE(0..16))
 2804          MAX-ACCESS  read-write
 2805          STATUS      current
 2806          DESCRIPTION
 2807                      "This is the key to be used when encrypting the
 2808                       configuration file while upload from the switch
 2809                       or while decrypting the file after download to
 2810                       the switch."
 2811          ::= { agentTransferConfigGroup 4 }
 2812 
 2813 
 2814 
 2815 --********************************************************************
 2816 -- agentTransferDownloadGroup
 2817 --********************************************************************
 2818 
 2819     agentTransferDownloadGroup   OBJECT IDENTIFIER ::=
 2820                                    { agentTransferConfigGroup 2 }
 2821 
 2822     agentTransferDownloadMode OBJECT-TYPE
 2823          SYNTAX      INTEGER {
 2824                      tftp(1),
 2825                      xmodem(2),
 2826                      ymodem(3),
 2827                      zmodem(4)
 2828                   }
 2829          MAX-ACCESS  read-write
 2830          STATUS      current
 2831          DESCRIPTION
 2832                      "Transfer download mode configures the mode to
 2833                      use when downloading to the switch. The mode is
 2834                      either X/Y/ZMODEM or TFTP. X/Y/ZMODEM is valid
 2835                      only when the file transfer is initiated by the
 2836                      serial EIA 232 port."
 2837          ::= { agentTransferDownloadGroup 1 }
 2838 
 2839     agentTransferDownloadServerIP OBJECT-TYPE
 2840          SYNTAX      IpAddress
 2841          MAX-ACCESS  read-write
 2842          STATUS      current
 2843          DESCRIPTION
 2844                      "Transfer download tftpserverip configures the IP
 2845                       address of the server where the file is located.
 2846                       It is valid only when the Transfer Mode is TFTP.
 2847                       The address is 4 integer bytes ranging from 0 to
 2848                       255."
 2849          ::= { agentTransferDownloadGroup 2 }
 2850 
 2851     agentTransferDownloadPath OBJECT-TYPE
 2852          SYNTAX      DisplayString (SIZE(0..63))
 2853          MAX-ACCESS  read-write
 2854          STATUS      current
 2855          DESCRIPTION
 2856                      "Transfer download tftppath configures the
 2857                       directory path where the file is located. The
 2858                       switch remembers the last file path used."
 2859          ::= { agentTransferDownloadGroup 3 }
 2860 
 2861     agentTransferDownloadFilename OBJECT-TYPE
 2862          SYNTAX      DisplayString (SIZE(0..63))
 2863          MAX-ACCESS  read-write
 2864          STATUS      current
 2865          DESCRIPTION
 2866                      "Transfer download tftpfilename configures the
 2867                       file name for the file being downloaded to the
 2868                       switch. It can be up to 32 alphanumeric
 2869                       characters. The switch remembers the last file
 2870                       name used.  File path can be appended to the
 2871                       file name if the string is less than 33
 2872                       characters. Otherwise, the File Path field will
 2873                       need to be used and the File Name will be
 2874                       appended to the File Path as is. An example
 2875                       would be File Path set to c:\tftp\code\
 2876                       and File Name set to e1r1v1.opr. Note: File
 2877                       Name, File Path, and TFTP Server IP Address are
 2878                       applicable only if the Transfer Mode is TFTP."
 2879 
 2880          ::= { agentTransferDownloadGroup 4 }
 2881 
 2882     agentTransferDownloadDataType OBJECT-TYPE
 2883          SYNTAX      INTEGER {
 2884                      code(2),
 2885                      config(3),
 2886                      webauthcert(4),
 2887                      webadmincert(5),
 2888                      signatures(6),
 2889                      customWebAuth(7),
 2890                      unknown(99)
 2891                   }
 2892          MAX-ACCESS  read-write
 2893          STATUS      current
 2894          DESCRIPTION
 2895                      "Transfer download datatype configures the type
 2896                       of file to downloaded to the switch.
 2897                       The types for download are:
 2898                         -   Code
 2899                         -   Configuration
 2900                         -   Certificates
 2901                         -   Signatures
 2902                         -   customWebauth- custom webauth tar ball"
 2903          ::= { agentTransferDownloadGroup 5 }
 2904 
 2905 
 2906     agentTransferDownloadStart OBJECT-TYPE
 2907          SYNTAX      INTEGER {
 2908                      enable(1),
 2909                      disable(2)
 2910                   }
 2911          MAX-ACCESS  read-write
 2912          STATUS      current
 2913          DESCRIPTION
 2914                      "Transfer download start will start an download
 2915                       transfer. The agentTransferDownloadMode object
 2916                       must not be set to xmodem(2), ymodem(3), or
 2917                       zmodem(4) to initiate a transfer via SNMP."
 2918          ::= { agentTransferDownloadGroup 6 }
 2919 
 2920     agentTransferDownloadStatus OBJECT-TYPE
 2921          SYNTAX      INTEGER {
 2922                      notInitiated(1),
 2923                      transferStarting(2),
 2924                      errorStarting(3),
 2925                      wrongFileType(4),
 2926                      updatingConfig(5),
 2927                      invalidConfigFile(6),
 2928                      writingToFlash(7),
 2929                      failureWritingToFlash(8),
 2930                      checkingCRC(9),
 2931                      failedCRC(10),
 2932                      unknownDirection(11),
 2933                      transferSuccessful(12),
 2934                      transferFailed(13),
 2935                      bootBreakOff(14),
 2936                      invalidTarFile(15),
 2937                      unknown(99)
 2938                   }
 2939          MAX-ACCESS  read-only
 2940          STATUS      current
 2941          DESCRIPTION
 2942                      "Indicates the current status of an download
 2943                       transfer."
 2944          ::= { agentTransferDownloadGroup 7 }
 2945 
 2946     agentTransferDownloadTftpMaxRetries OBJECT-TYPE
 2947          SYNTAX      Unsigned32(1..254)
 2948          MAX-ACCESS  read-write
 2949          STATUS      current
 2950          DESCRIPTION
 2951                      "Maximum number of retries to be allowed for a
 2952                       TFTP message packet."
 2953          DEFVAL{ 10 }
 2954           ::= { agentTransferDownloadGroup 8 }
 2955 
 2956     agentTransferDownloadTftpTimeout OBJECT-TYPE
 2957          SYNTAX      Unsigned32(1..254)
 2958          MAX-ACCESS  read-write
 2959          STATUS      current
 2960          DESCRIPTION
 2961                      "Timeout in seconds for a TFTP message packet."
 2962          DEFVAL{ 6 }
 2963           ::= { agentTransferDownloadGroup 9 }
 2964 
 2965 --********************************************************************
 2966     -- agentDot3adAggPortTable
 2967 --********************************************************************
 2968 
 2969     agentDot3adAggPortTable OBJECT-TYPE
 2970          SYNTAX      SEQUENCE OF AgentDot3adAggPortEntry
 2971          MAX-ACCESS  not-accessible
 2972          STATUS      obsolete
 2973          DESCRIPTION
 2974                      "This table provides 802.3ad link aggregation
 2975                       information for each physical port that is not
 2976                       available through the standard MIB."
 2977          ::= { agentConfigGroup 11 }
 2978 
 2979     agentDot3adAggPortEntry OBJECT-TYPE
 2980          SYNTAX      AgentDot3adAggPortEntry
 2981          MAX-ACCESS  not-accessible
 2982          STATUS      obsolete
 2983          DESCRIPTION
 2984                      "Information about a table entry.  The
 2985                       agentDot3adAggPort identifies the external
 2986                       interface number of the port."
 2987          INDEX       { agentDot3adAggPort }
 2988          ::= { agentDot3adAggPortTable 1 }
 2989 
 2990     AgentDot3adAggPortEntry ::= SEQUENCE {
 2991          agentDot3adAggPort           Integer32,
 2992          agentDot3adAggPortLACPMode   INTEGER
 2993          }
 2994 
 2995     agentDot3adAggPort OBJECT-TYPE
 2996          SYNTAX      Integer32
 2997          MAX-ACCESS  read-only
 2998          STATUS      obsolete
 2999          DESCRIPTION
 3000                      "ifIndex of this physical port"
 3001          ::= { agentDot3adAggPortEntry 1 }
 3002 
 3003     agentDot3adAggPortLACPMode OBJECT-TYPE
 3004          SYNTAX      INTEGER {
 3005                      enable(1),
 3006                      disable(2)
 3007                   }
 3008          MAX-ACCESS  read-write
 3009          STATUS      obsolete
 3010          DESCRIPTION
 3011                      "Enable/disable 802.3ad LACP on this port"
 3012          ::= { agentDot3adAggPortEntry 21 }
 3013 
 3014 
 3015 --********************************************************************
 3016     -- agentPortConfigTable
 3017     --
 3018 --********************************************************************
 3019 
 3020     agentPortConfigTable OBJECT-TYPE
 3021          SYNTAX      SEQUENCE OF AgentPortConfigEntry
 3022          MAX-ACCESS  not-accessible
 3023          STATUS      current
 3024          DESCRIPTION
 3025                      "A table of the switch's physical port config
 3026                       entries"
 3027          ::= { agentConfigGroup 12 }
 3028 
 3029     agentPortConfigEntry OBJECT-TYPE
 3030          SYNTAX      AgentPortConfigEntry
 3031          MAX-ACCESS  not-accessible
 3032          STATUS      current
 3033          DESCRIPTION
 3034                      "Switch's physical port config entry"
 3035          INDEX       { agentPortDot1dBasePort }
 3036          ::= { agentPortConfigTable 1 }
 3037 
 3038     AgentPortConfigEntry ::= SEQUENCE {
 3039           agentPortDot1dBasePort         Integer32,
 3040           agentPortIfIndex               Integer32,
 3041           agentPortIanaType              IANAifType,
 3042           agentPortSTPMode               INTEGER,
 3043           agentPortSTPState              INTEGER,
 3044           agentPortAdminMode             INTEGER,
 3045           agentPortPhysicalMode          INTEGER,
 3046           agentPortPhysicalStatus        INTEGER,
 3047           agentPortLinkTrapMode          INTEGER,
 3048           agentPortClearStats            INTEGER,
 3049           agentPortDefaultType           OBJECT IDENTIFIER,
 3050           agentPortType                  OBJECT IDENTIFIER,
 3051           agentPortAutoNegAdminStatus    INTEGER,
 3052           agentPortDot3FlowControlMode   INTEGER,
 3053           agentPortPowerMode             INTEGER,
 3054           agentPortGvrpStatus            INTEGER,
 3055           agentPortGarpJoinTime          Unsigned32,
 3056           agentPortGarpLeaveTime         Unsigned32,
 3057           agentPortGarpLeaveAllTime      Unsigned32,
 3058           agentPortMirrorMode            INTEGER,
 3059           agentPortMulticastApplianceMode  INTEGER,
 3060           agentPortOperationalStatus       INTEGER
 3061           }
 3062 
 3063     agentPortDot1dBasePort OBJECT-TYPE
 3064          SYNTAX  Integer32 (1..65535)
 3065          MAX-ACCESS  read-only
 3066          STATUS  current
 3067          DESCRIPTION
 3068                  "The port number of this port."
 3069          ::= { agentPortConfigEntry 1 }
 3070 
 3071     agentPortIfIndex OBJECT-TYPE
 3072          SYNTAX      Integer32
 3073          MAX-ACCESS  read-only
 3074          STATUS      current
 3075          DESCRIPTION
 3076                      "The switch's Port IfIndex"
 3077          ::= { agentPortConfigEntry 2 }
 3078 
 3079     agentPortIanaType OBJECT-TYPE
 3080          SYNTAX      IANAifType
 3081          MAX-ACCESS  read-only
 3082          STATUS      current
 3083          DESCRIPTION
 3084                      "The switch's Port Type"
 3085          ::= { agentPortConfigEntry 3 }
 3086 
 3087     agentPortSTPMode OBJECT-TYPE
 3088          SYNTAX      INTEGER {
 3089                       dot1d(1),
 3090                       fast(2),
 3091                       off(3)
 3092                      }
 3093          MAX-ACCESS  read-write
 3094          STATUS      current
 3095          DESCRIPTION
 3096                      "The switch's Port Spanning Tree Protocol Mode
 3097                       STP mode values are:
 3098                       dot1d (the default)
 3099                       fast, indicates you want to use the fast
 3100                       spanning tree mode
 3101                       off, indicates the STP mode is turned off for a
 3102                       particular port"
 3103          ::= { agentPortConfigEntry 4 }
 3104 
 3105     agentPortSTPState OBJECT-TYPE
 3106          SYNTAX      INTEGER {
 3107                       blocking(1),
 3108                       listening(2),
 3109                       learning(3),
 3110                       forwarding(4),
 3111                       disabled(5)
 3112                      }
 3113          MAX-ACCESS  read-only
 3114          STATUS      current
 3115          DESCRIPTION
 3116                      "The switch's Port Spanning Tree Protocol State"
 3117          ::= { agentPortConfigEntry 5 }
 3118 
 3119     agentPortAdminMode OBJECT-TYPE
 3120          SYNTAX      INTEGER {
 3121                      enable(1),
 3122                      disable(2)
 3123                  }
 3124          MAX-ACCESS  read-write
 3125          STATUS      current
 3126          DESCRIPTION
 3127                      "The switch's Port Admin Mode"
 3128          ::= { agentPortConfigEntry 6 }
 3129 
 3130     agentPortPhysicalMode OBJECT-TYPE
 3131          SYNTAX      INTEGER {
 3132                      autoNegotiate(1),
 3133                      half10(2),
 3134                      full10(3),
 3135                      half100(4),
 3136                      full100(5),
 3137                      full1000sx(8)
 3138                   }
 3139          MAX-ACCESS  read-write
 3140          STATUS      current
 3141          DESCRIPTION
 3142                      "The switch's Port Speed Mode.  This is the
 3143                       configured physical mode.This object is
 3144                       read-only for gigabit ports"
 3145          ::= { agentPortConfigEntry 7 }
 3146 
 3147     agentPortPhysicalStatus OBJECT-TYPE
 3148          SYNTAX      INTEGER {
 3149                      autonegotiate(1),
 3150                      half10(2),
 3151                      full10(3),
 3152                      half100(4),
 3153                      full100(5),
 3154                      full1000sx(8),
 3155                      unknown(9)
 3156                   }
 3157          MAX-ACCESS  read-only
 3158          STATUS      current
 3159          DESCRIPTION
 3160                      "The switch's Port Physical Speed Status.This
 3161                       is the current actual speed."
 3162          ::= { agentPortConfigEntry 8 }
 3163 
 3164     agentPortLinkTrapMode OBJECT-TYPE
 3165          SYNTAX      INTEGER {
 3166                      enable(1),
 3167                      disable(2)
 3168                   }
 3169          MAX-ACCESS  read-write
 3170          STATUS      current
 3171          DESCRIPTION
 3172                      "If enabled, link up and link down traps will be
 3173                       sent for this port."
 3174          ::= { agentPortConfigEntry 9 }
 3175 
 3176      agentPortClearStats OBJECT-TYPE
 3177          SYNTAX      INTEGER {
 3178                      enable(1),
 3179                      disable(2)
 3180                   }
 3181          MAX-ACCESS  read-write
 3182          STATUS      current
 3183          DESCRIPTION
 3184                      "Clear stats for this port only"
 3185          ::= { agentPortConfigEntry 10 }
 3186 
 3187     agentPortDefaultType OBJECT-TYPE
 3188          SYNTAX  OBJECT IDENTIFIER
 3189          MAX-ACCESS  read-write
 3190          STATUS  current
 3191          DESCRIPTION
 3192                  "This object identifies the default administrative
 3193                   port type, to be used in conjunction with the
 3194                   operational port type denoted by agentPortType.
 3195 
 3196                   The set of possible values for this object is
 3197                   the same as the set defined for the agentPortType
 3198                   object.
 3199 
 3200                   This object represents the administratively-
 3201                   configured
 3202                   type of the MAU.  If auto-negotiation is not enabled
 3203                   or is not implemented for this MAU, the value of
 3204                   this object determines the operational type of the
 3205                   MAU.  In this case, a set to this object will force
 3206                   the MAU into the specified operating mode.
 3207 
 3208                   If auto-negotiation is implemented and enabled for
 3209                   this MAU, the operational type of the MAU is
 3210                   determined by auto-negotiation, and the value of
 3211                   this object denotes the type to which the MAU will
 3212                   automatically revert if/when auto-negotiation is
 3213                   later disabled.
 3214 
 3215                   The valid values for this object are:
 3216                        dot3MauType10BaseTHD
 3217                        dot3MauType10BaseTFD
 3218                        dot3MauType100BaseTXHD
 3219                        dot3MauType100BaseTXFD
 3220                        dot3MauType100BaseFXFD
 3221                        dot3MauType1000BaseSXFD"
 3222 
 3223          REFERENCE "RFC 2668"
 3224          ::= { agentPortConfigEntry 11 }
 3225 
 3226     agentPortType OBJECT-TYPE
 3227          SYNTAX  OBJECT IDENTIFIER
 3228          MAX-ACCESS  read-only
 3229          STATUS  current
 3230          DESCRIPTION
 3231                  "This object identifies the port type.
 3232                   An initial set of MAU types are defined in RFC 2668.
 3233                   The assignment of OBJECT IDENTIFIERs to new types of
 3234                   MAUs is managed by the IANA.
 3235 
 3236                   If the MAU type is unknown, the object identifier
 3237                   unknownMauType OBJECT IDENTIFIER ::= { 0 0 }
 3238                   is returned.  Note that unknownMauType is a
 3239                   syntactically valid object identifier, and any
 3240                   conformant implementation of ASN.1 and the BER must
 3241                   be able to generate and recognize this value.
 3242                   This object represents the operational type of the
 3243                   MAU, as determined by either (1) the result of the
 3244                   auto-negotiation function or (2) if auto-negotiation
 3245                   is not enabled or is not implemented for this MAU,
 3246                   by the value of the object qbEnetDefaultType, or (3)
 3247                   for the GigE card a value determined by the GBIC
 3248                   connected to the card.  In case (2), a set to the
 3249                   object qbEnetPortDefaultType will force the MAU into
 3250                   the new operating mode.
 3251 
 3252                   The valid values for this object are:
 3253 
 3254                        dot3MauType10BaseTHD
 3255                        dot3MauType10BaseTFD
 3256                        dot3MauType100BaseTXHD
 3257                        dot3MauType100BaseTXFD
 3258                        dot3MauType100BaseFXFD
 3259                        dot3MauType1000BaseSXFD"
 3260 
 3261          REFERENCE "RFC 2668"
 3262          ::= { agentPortConfigEntry 12 }
 3263 
 3264     agentPortAutoNegAdminStatus OBJECT-TYPE
 3265          SYNTAX  INTEGER {
 3266                     enable(1),
 3267                     disable(2)
 3268                  }
 3269          MAX-ACCESS  read-write
 3270          STATUS  current
 3271          DESCRIPTION
 3272                  "This object identifies the administration status of
 3273                   auto negotiation for this port."
 3274          ::= { agentPortConfigEntry 13 }
 3275 
 3276 
 3277     agentPortDot3FlowControlMode OBJECT-TYPE
 3278          SYNTAX      INTEGER {
 3279                      enable(1),
 3280                      disable(2)
 3281                   }
 3282          MAX-ACCESS  read-write
 3283          STATUS      current
 3284          DESCRIPTION
 3285                      "Config flowcontrol allows you to enable or
 3286                      disable 802.3x flow control for this port. This
 3287                      value applies to only full-duplex mode ports."
 3288          ::= { agentPortConfigEntry 14 }
 3289 
 3290     agentPortPowerMode OBJECT-TYPE
 3291          SYNTAX      INTEGER {
 3292                      enable(1),
 3293                      disable(0)
 3294                   }
 3295          MAX-ACCESS  read-write
 3296          STATUS      current
 3297          DESCRIPTION
 3298         " Enable/Disable the port's Power over ethernet. This doesn't
 3299           apply to appliances that have no POE controller."
 3300          ::= { agentPortConfigEntry 15 }
 3301 
 3302     agentPortGvrpStatus OBJECT-TYPE
 3303         SYNTAX      INTEGER { enabled(1), disabled(2) }
 3304         MAX-ACCESS  read-write
 3305         STATUS      obsolete
 3306         DESCRIPTION
 3307             "The state of GVRP operation on this port.  The value
 3308             enabled(1) indicates that GVRP is enabled on this port,
 3309             as long as dot1qGvrpStatus is also enabled for this
 3310             device.  When disabled(2) but dot1qGvrpStatus is still
 3311             enabled for the device, GVRP is disabled on this port:
 3312             any GVRP packets received will be silently discarded and
 3313             no GVRP registrations will be propagated from other
 3314             ports.  This object affects all GVRP Applicant and
 3315             Registrar state machines on this port.  A transition
 3316             from disabled(2) to enabled(1) will cause a reset of all
 3317             GVRP state machines on this port.(Attribute no longer
 3318             supported)"
 3319         DEFVAL      { enabled }
 3320         ::= { agentPortConfigEntry 16 }
 3321 
 3322     agentPortGarpJoinTime OBJECT-TYPE
 3323         SYNTAX      Unsigned32
 3324         MAX-ACCESS  read-write
 3325         STATUS      obsolete
 3326         DESCRIPTION
 3327             "The GARP Join time, in centiseconds.(Attribute no longer
 3328              supported)"
 3329         DEFVAL      { 20 }
 3330         ::= { agentPortConfigEntry 17 }
 3331 
 3332     agentPortGarpLeaveTime OBJECT-TYPE
 3333         SYNTAX      Unsigned32
 3334         MAX-ACCESS  read-write
 3335         STATUS      obsolete
 3336         DESCRIPTION
 3337             "The GARP Leave time, in centiseconds.(Attribute no
 3338              longer supported)"
 3339         DEFVAL      { 60 }
 3340         ::= { agentPortConfigEntry 18 }
 3341 
 3342     agentPortGarpLeaveAllTime OBJECT-TYPE
 3343         SYNTAX      Unsigned32
 3344         MAX-ACCESS  read-write
 3345         STATUS      obsolete
 3346         DESCRIPTION
 3347             "The GARP LeaveAll time, in centiseconds.(Attribute no
 3348              longer supported)"
 3349         DEFVAL      { 1000 }
 3350         ::= { agentPortConfigEntry 19 }
 3351 
 3352     agentPortMirrorMode OBJECT-TYPE
 3353          SYNTAX      INTEGER {
 3354                      disable(0),
 3355                      enable(1)
 3356                  }
 3357          MAX-ACCESS  read-write
 3358          STATUS      current
 3359          DESCRIPTION
 3360                      "The switch's Port Mirror Mode. If enabled, then
 3361                       this is the port that the packets are mirrored
 3362                       to."
 3363          ::= { agentPortConfigEntry 20 }
 3364 
 3365     agentPortMulticastApplianceMode OBJECT-TYPE
 3366          SYNTAX      INTEGER {
 3367                      disable(0),
 3368                      enable(1)
 3369                  }
 3370          MAX-ACCESS  read-write
 3371          STATUS      current
 3372          DESCRIPTION
 3373                      "The Port Multicast Appliance Mode. If enabled,
 3374                       then this port allows multicast streams through
 3375                       it. At a time, a maximum of four ports including
 3376                       the gigabit ethernet port can have this mode
 3377                       enabled on them.  This is to limit the number of
 3378                       multicast streams allowed through the switch
 3379                       at a given time."
 3380          ::= { agentPortConfigEntry 21 }
 3381 
 3382   agentPortOperationalStatus OBJECT-TYPE
 3383        SYNTAX  INTEGER {
 3384                    up(1),        -- ready to pass packets
 3385                    down(2)
 3386                }
 3387        MAX-ACCESS  read-only
 3388        STATUS      current
 3389        DESCRIPTION
 3390                "The current operational state of the port."
 3391        ::= { agentPortConfigEntry 40 }
 3392 
 3393 
 3394 --********************************************************************
 3395 --    agentSystemGroup
 3396 --********************************************************************
 3397 
 3398      agentSaveConfig OBJECT-TYPE
 3399          SYNTAX      INTEGER {
 3400                      enable(1),
 3401                      disable(2)
 3402                   }
 3403          MAX-ACCESS  read-write
 3404          STATUS      current
 3405          DESCRIPTION
 3406                      "save config to NVRAM"
 3407          ::= { agentSystemGroup 1 }
 3408 
 3409      agentClearConfig OBJECT-TYPE
 3410          SYNTAX      INTEGER {
 3411                      enable(1),
 3412                      disable(2)
 3413                   }
 3414          MAX-ACCESS  read-write
 3415          STATUS      current
 3416          DESCRIPTION
 3417                      "clear config to factory defaults"
 3418          ::= { agentSystemGroup 2 }
 3419 
 3420      agentClearLags OBJECT-TYPE
 3421          SYNTAX      INTEGER {
 3422                      enable(1),
 3423                      disable(2)
 3424                   }
 3425          MAX-ACCESS  read-write
 3426          STATUS      current
 3427          DESCRIPTION
 3428                      "clear lag configuration"
 3429          ::= { agentSystemGroup 3 }
 3430 
 3431      agentClearLoginSessions OBJECT-TYPE
 3432          SYNTAX      INTEGER {
 3433                      enable(1),
 3434                      disable(2)
 3435                   }
 3436          MAX-ACCESS  read-write
 3437          STATUS      current
 3438          DESCRIPTION
 3439                      "close all telnet sessions"
 3440          ::= { agentSystemGroup 4 }
 3441 
 3442      agentClearPortStats OBJECT-TYPE
 3443          SYNTAX      INTEGER {
 3444                      enable(1),
 3445                      disable(2)
 3446                   }
 3447          MAX-ACCESS  read-write
 3448          STATUS      current
 3449          DESCRIPTION
 3450                      "clear all port statistics"
 3451          ::= { agentSystemGroup 6 }
 3452 
 3453      agentClearSwitchStats OBJECT-TYPE
 3454          SYNTAX      INTEGER {
 3455                      enable(1),
 3456                      disable(2)
 3457                   }
 3458          MAX-ACCESS  read-write
 3459          STATUS      current
 3460          DESCRIPTION
 3461                      "clear all switch statistics"
 3462          ::= { agentSystemGroup 7 }
 3463 
 3464      agentClearTrapLog OBJECT-TYPE
 3465          SYNTAX      INTEGER {
 3466                      enable(1),
 3467                      disable(2)
 3468                   }
 3469          MAX-ACCESS  read-write
 3470          STATUS      current
 3471          DESCRIPTION
 3472                      "clear trap log"
 3473          ::= { agentSystemGroup 8 }
 3474 
 3475 
 3476      agentResetSystem OBJECT-TYPE
 3477          SYNTAX      INTEGER {
 3478                      enable(1),
 3479                      disable(2)
 3480                   }
 3481          MAX-ACCESS  read-write
 3482          STATUS      current
 3483          DESCRIPTION
 3484                      "reset the switch"
 3485          ::= { agentSystemGroup 10 }
 3486 
 3487 
 3488 --********************************************************************
 3489  -- portStatsTable
 3490  -- Enterprise portion of Ethernet Statistics Group
 3491  -- This augments the etherStatsTable of RMON group.
 3492 --********************************************************************
 3493 
 3494 portStatsTable OBJECT-TYPE
 3495      SYNTAX     SEQUENCE OF PortStatsEntry
 3496      MAX-ACCESS not-accessible
 3497      STATUS     current
 3498      DESCRIPTION
 3499          "A list of additional thernet statistics entries."
 3500      ::= { stats 1 }
 3501 
 3502 portStatsEntry OBJECT-TYPE
 3503      SYNTAX     PortStatsEntry
 3504      MAX-ACCESS not-accessible
 3505      STATUS     current
 3506      DESCRIPTION
 3507          "A collection of statistics kept for a particular Ethernet
 3508          interface."
 3509      INDEX { portStatsIndex }
 3510      ::= { portStatsTable 1 }
 3511 
 3512 PortStatsEntry ::= SEQUENCE {
 3513      portStatsIndex                      Integer32,
 3514      portStatsPktsTx64Octets             Counter32,
 3515      portStatsPktsTx65to127Octets        Counter32,
 3516      portStatsPktsTx128to255Octets       Counter32,
 3517      portStatsPktsTx256to511Octets       Counter32,
 3518      portStatsPktsTx512to1023Octets      Counter32,
 3519      portStatsPktsTx1024to1518Octets     Counter32,
 3520      portStatsPktsRx1519to1530Octets     Counter32,
 3521      portStatsPktsTx1519to1530Octets     Counter32,
 3522      portStatsPktsTxOversizeOctets       Counter32
 3523  }
 3524 
 3525    portStatsIndex OBJECT-TYPE
 3526      SYNTAX     Integer32 (1..65535)
 3527      MAX-ACCESS read-only
 3528      STATUS     current
 3529      DESCRIPTION
 3530          "The value of this object uniquely identifies
 3531           this portStatsEntry."
 3532      ::= { portStatsEntry 1 }
 3533 
 3534    portStatsPktsTx64Octets OBJECT-TYPE
 3535      SYNTAX     Counter32
 3536      UNITS      "Packets"
 3537      MAX-ACCESS read-only
 3538      STATUS     current
 3539      DESCRIPTION
 3540          "The total number of packets (including bad
 3541          packets) transmitted that were 64 octets in length
 3542          (excluding framing bits but including FCS octets)."
 3543      ::= { portStatsEntry 2 }
 3544 
 3545    portStatsPktsTx65to127Octets OBJECT-TYPE
 3546      SYNTAX     Counter32
 3547      UNITS      "Packets"
 3548      MAX-ACCESS read-only
 3549      STATUS     current
 3550      DESCRIPTION
 3551          "The total number of packets (including bad
 3552          packets) transmitted that were between
 3553          65 and 127 octets in length inclusive
 3554          (excluding framing bits but including FCS octets)."
 3555      ::= { portStatsEntry 3 }
 3556 
 3557    portStatsPktsTx128to255Octets OBJECT-TYPE
 3558      SYNTAX     Counter32
 3559      UNITS      "Packets"
 3560      MAX-ACCESS read-only
 3561      STATUS     current
 3562      DESCRIPTION
 3563          "The total number of packets (including bad
 3564          packets) transmitted that were between
 3565          128 and 255 octets in length inclusive
 3566          (excluding framing bits but including FCS octets)."
 3567      ::= { portStatsEntry 4 }
 3568 
 3569   portStatsPktsTx256to511Octets OBJECT-TYPE
 3570      SYNTAX     Counter32
 3571      UNITS      "Packets"
 3572      MAX-ACCESS read-only
 3573      STATUS     current
 3574      DESCRIPTION
 3575          "The total number of packets (including bad
 3576          packets) transmitted that were between
 3577          256 and 511 octets in length inclusive
 3578          (excluding framing bits but including FCS octets)."
 3579      ::= { portStatsEntry 5 }
 3580 
 3581  portStatsPktsTx512to1023Octets OBJECT-TYPE
 3582      SYNTAX     Counter32
 3583      UNITS      "Packets"
 3584      MAX-ACCESS read-only
 3585      STATUS     current
 3586      DESCRIPTION
 3587          "The total number of packets (including bad
 3588          packets) transmitted that were between
 3589          512 and 1023 octets in length inclusive
 3590          (excluding framing bits but including FCS octets)."
 3591      ::= { portStatsEntry 6 }
 3592 
 3593  portStatsPktsTx1024to1518Octets OBJECT-TYPE
 3594      SYNTAX     Counter32
 3595      UNITS      "Packets"
 3596      MAX-ACCESS read-only
 3597      STATUS     current
 3598      DESCRIPTION
 3599          "The total number of packets (including bad
 3600          packets) transmitted that were between
 3601          1024 and 1518 octets in length inclusive
 3602          (excluding framing bits but including FCS octets)."
 3603      ::= { portStatsEntry 7 }
 3604 
 3605  portStatsPktsRx1519to1530Octets OBJECT-TYPE
 3606      SYNTAX     Counter32
 3607      UNITS      "Packets"
 3608      MAX-ACCESS read-only
 3609      STATUS     current
 3610      DESCRIPTION
 3611          "The total number of packets (including bad
 3612          packets) received that were between
 3613          1519 and 1530 octets in length inclusive
 3614          (excluding framing bits but including FCS octets)."
 3615      ::= { portStatsEntry 8 }
 3616 
 3617  portStatsPktsTx1519to1530Octets OBJECT-TYPE
 3618      SYNTAX     Counter32
 3619      UNITS      "Packets"
 3620      MAX-ACCESS read-only
 3621      STATUS     current
 3622      DESCRIPTION
 3623          "The total number of packets (including bad
 3624          packets) transmitted that were between
 3625          1519 and 1530 octets in length inclusive
 3626          (excluding framing bits but including FCS octets)."
 3627      ::= { portStatsEntry 9 }
 3628 
 3629 
 3630  portStatsPktsTxOversizeOctets      OBJECT-TYPE
 3631      SYNTAX     Counter32
 3632      UNITS      "Packets"
 3633      MAX-ACCESS read-only
 3634      STATUS     current
 3635      DESCRIPTION
 3636          "The total number of packets (including bad
 3637          packets) transmitted that were more than
 3638          1530 octets in length.
 3639          (excluding framing bits but including FCS octets)."
 3640      ::= { portStatsEntry 30 }
 3641 
 3642 
 3643 --********************************************************************
 3644 --   switchingTraps
 3645 --********************************************************************
 3646 
 3647      multipleUsersTrap NOTIFICATION-TYPE
 3648          STATUS             current
 3649          DESCRIPTION
 3650              "Multiple Users Log Trap."
 3651          ::= { switchingTraps 1 }
 3652 
 3653      broadcastStormStartTrap NOTIFICATION-TYPE
 3654          STATUS             current
 3655          DESCRIPTION
 3656              "Broadcast Storm Start Log Trap."
 3657          ::= { switchingTraps 2 }
 3658 
 3659      broadcastStormEndTrap NOTIFICATION-TYPE
 3660          STATUS             current
 3661          DESCRIPTION
 3662              "Broadcast Storm End Log Trap."
 3663          ::= { switchingTraps 3 }
 3664 
 3665      linkFailureTrap NOTIFICATION-TYPE
 3666          STATUS             current
 3667          DESCRIPTION
 3668              "trapMgrLinkFailureLogTrap."
 3669          ::= { switchingTraps 4 }
 3670 
 3671      vlanRequestFailureTrap NOTIFICATION-TYPE
 3672          OBJECTS {
 3673                       dot1qVlanIndex
 3674                  }
 3675          STATUS             current
 3676          DESCRIPTION
 3677              "Vlan Request Failure Log Trap"
 3678          ::= { switchingTraps 5 }
 3679 
 3680      vlanDeleteLastTrap NOTIFICATION-TYPE
 3681          OBJECTS {
 3682                       dot1qVlanIndex
 3683                  }
 3684          STATUS             current
 3685          DESCRIPTION
 3686              "Last Vlan Delete Log Trap"
 3687          ::= { switchingTraps 6 }
 3688 
 3689      vlanDefaultCfgFailureTrap NOTIFICATION-TYPE
 3690          OBJECTS {
 3691                       dot1qVlanIndex
 3692                  }
 3693          STATUS             current
 3694          DESCRIPTION
 3695              "Default Vlan Config Failure Log Trap"
 3696          ::= { switchingTraps 7 }
 3697 
 3698      vlanRestoreFailureTrap NOTIFICATION-TYPE
 3699          OBJECTS {
 3700                       dot1qVlanIndex
 3701                  }
 3702          STATUS             current
 3703          DESCRIPTION
 3704              "Vlan Restore Failure Log Trap"
 3705          ::= { switchingTraps 8 }
 3706 
 3707      fanFailureTrap NOTIFICATION-TYPE
 3708          STATUS             current
 3709          DESCRIPTION
 3710              "Fan Failure Log Trap."
 3711          ::= { switchingTraps 9 }
 3712 
 3713      stpInstanceNewRootTrap NOTIFICATION-TYPE
 3714          OBJECTS {
 3715                       dot1qVlanIndex
 3716                  }
 3717          STATUS             current
 3718          DESCRIPTION
 3719              "STP Instance New Root Trap"
 3720          ::= { switchingTraps 10 }
 3721 
 3722      stpInstanceTopologyChangeTrap NOTIFICATION-TYPE
 3723          OBJECTS {
 3724                       dot1qVlanIndex
 3725                  }
 3726          STATUS             current
 3727          DESCRIPTION
 3728              "STP Instance Topology Change Trap"
 3729          ::= { switchingTraps 11 }
 3730 
 3731      powerSupplyStatusChangeTrap NOTIFICATION-TYPE
 3732          STATUS             current
 3733          DESCRIPTION
 3734              "Power Supply Status Change Trap"
 3735          ::= { switchingTraps 12 }
 3736 
 3737 
 3738 --********************************************************************
 3739 --*    Compliance statements
 3740 --********************************************************************
 3741 bsnSwitchingCompliance MODULE-COMPLIANCE
 3742     STATUS  current
 3743     DESCRIPTION
 3744         "The compliance statement for the SNMP entities that
 3745          implement the bsnSwitching module"
 3746 
 3747     MODULE
 3748         MANDATORY-GROUPS { bsnSwitchingAgentInfoGroup,
 3749                            bsnSwitchingAgentConfigGroup,
 3750                            bsnSwitchingAgentSystemGroup,
 3751                            bsnSwitchingAgentStatsGroup }
 3752     ::= { bsnSwitchingCompliances 1 }
 3753 
 3754 --********************************************************************
 3755 --*    Units of conformance
 3756 --********************************************************************
 3757 bsnSwitchingAgentInfoGroup OBJECT-GROUP
 3758     OBJECTS {
 3759         agentInventorySysDescription,
 3760         agentInventoryMachineType,
 3761         agentInventoryMachineModel,
 3762         agentInventorySerialNumber,
 3763         agentInventoryMaintenanceLevel,
 3764         agentInventoryBurnedInMacAddress,
 3765         agentInventoryOperatingSystem,
 3766         agentInventoryManufacturerName,
 3767         agentInventoryProductName,
 3768         agentInventoryProductVersion,
 3769         agentInventoryIsGigECardPresent,
 3770         agentInventoryIsCryptoCardPresent,
 3771         agentInventoryIsForeignAPSupported,
 3772         agentInventoryMaxNumberOfAPsSupported,
 3773         agentInventoryIsCryptoCard2Present,
 3774         agentInventoryFipsModeEnabled,
 3775         agentTrapLogTotal,
 3776         agentTrapLogTotalSinceLastViewed,
 3777         agentTrapLogIndex,
 3778         agentTrapLogSystemTime,
 3779         agentTrapLogTrap,
 3780         agentRadioUpDownTrapCount,
 3781         agentApAssociateDisassociateTrapCount,
 3782         agentApLoadProfileFailTrapCount,
 3783         agentApNoiseProfileFailTrapCount,
 3784         agentApInterferenceProfileFailTrapCount,
 3785         agentApCoverageProfileFailTrapCount,
 3786         agentSwitchInfoLwappTransportMode,
 3787         agentSwitchInfoPowerSupply1Present,
 3788         agentSwitchInfoPowerSupply1Operational,
 3789         agentSwitchInfoPowerSupply2Present,
 3790         agentSwitchInfoPowerSupply2Operational,
 3791         agentCurrentCPUUtilization,
 3792         agentTotalMemory,
 3793         agentFreeMemory,
 3794         agentWcpDeviceName,
 3795         agentWcpSlotNumber,
 3796         agentWcpPortNumber,
 3797         agentWcpPeerPortNumber,
 3798         agentWcpPeerIpAddress,
 3799         agentWcpControllerTableChecksum,
 3800         agentWcpControllerInfoSlotNumber,
 3801         agentWcpControllerInfoPortNumber,
 3802         agentWcpControllerInfoIpAddress
 3803     }
 3804     STATUS      current
 3805     DESCRIPTION
 3806         "This collection of objects provide switching information."
 3807     ::= { bsnSwitchingGroups 1}
 3808 
 3809 
 3810 bsnSwitchingAgentConfigGroup OBJECT-GROUP
 3811     OBJECTS {
 3812         agentLoginSessionIndex,
 3813         agentLoginSessionUserName,
 3814         agentLoginSessionIPAddress,
 3815         agentLoginSessionConnectionType,
 3816         agentLoginSessionIdleTime,
 3817         agentLoginSessionSessionTime,
 3818         agentLoginSessionStatus,
 3819         agentTelnetLoginTimeout,
 3820         agentTelnetMaxSessions,
 3821         agentTelnetAllowNewMode,
 3822         agentSSHAllowNewMode,
 3823         agentSerialTimeout,
 3824         agentSerialBaudrate,
 3825         agentSerialCharacterSize,
 3826         agentSerialHWFlowControlMode,
 3827         agentSerialStopBits,
 3828         agentSerialParityType,
 3829         agentNetworkIPAddress,
 3830         agentNetworkSubnetMask,
 3831         agentNetworkDefaultGateway,
 3832         agentNetworkBurnedInMacAddress,
 3833         agentNetworkConfigProtocol,
 3834         agentNetworkWebMode,
 3835         agentNetworkSecureWebMode,
 3836         agentNetworkMulticastMode,
 3837         agentNetworkDsPortNumber,
 3838         agentNetworkUserIdleTimeout,
 3839         agentNetworkArpTimeout,
 3840         agentNetworkManagementVlan,
 3841         agentNetworkAllowMgmtViaWireless,
 3842         agentNetworkBroadcastSsidMode,
 3843         agentNetworkSecureWebPassword,
 3844         agentNetworkWebAdminCertType,
 3845         agentNetworkWebAuthCertRegenerateCmdInvoke,
 3846         agentNetworkWebAdminCertRegenerateCmdInvoke,
 3847         agentNetworkWebAuthCertType,
 3848         agentNetworkRouteIPAddress,
 3849         agentNetworkRouteIPNetmask,
 3850         agentNetworkRouteGateway,
 3851         agentNetworkRouteStatus,
 3852         agentNetworkPeerToPeerBlockingMode,
 3853         agentNetworkMulticastGroupAddress,
 3854         agentInterfaceName,
 3855         agentInterfaceVlanId,
 3856         agentInterfaceType,
 3857         agentInterfaceMacAddress,
 3858         agentInterfaceIPAddress,
 3859         agentInterfaceIPNetmask,
 3860         agentInterfaceIPGateway,
 3861         agentInterfacePortNo,
 3862         agentInterfacePrimaryDhcpAddress,
 3863         agentInterfaceSecondaryDhcpAddress,
 3864         agentInterfaceDhcpProtocol,
 3865         agentInterfaceDnsHostName,
 3866         agentInterfaceAclName,
 3867         agentInterfaceAPManagementFeature,
 3868         agentInterfaceActivePortNo,
 3869         agentInterfaceBackupPortNo,
 3870         agentInterfaceVlanQuarantine,
 3871         agentInterfaceRowStatus,
 3872         agentNtpPollingInterval,
 3873         agentNtpServerIndex,
 3874         agentNtpServerAddress,
 3875         agentNtpServerRowStatus,
 3876         agentDhcpScopeIndex,
 3877         agentDhcpScopeName,
 3878         agentDhcpScopeLeaseTime,
 3879         agentDhcpScopeNetwork,
 3880         agentDhcpScopeNetmask,
 3881         agentDhcpScopePoolStartAddress,
 3882         agentDhcpScopePoolEndAddress,
 3883         agentDhcpScopeDefaultRouterAddress1,
 3884         agentDhcpScopeDefaultRouterAddress2,
 3885         agentDhcpScopeDefaultRouterAddress3,
 3886         agentDhcpScopeDnsDomainName,
 3887         agentDhcpScopeDnsServerAddress1,
 3888         agentDhcpScopeDnsServerAddress2,
 3889         agentDhcpScopeDnsServerAddress3,
 3890         agentDhcpScopeNetbiosNameServerAddress1,
 3891         agentDhcpScopeNetbiosNameServerAddress2,
 3892         agentDhcpScopeNetbiosNameServerAddress3,
 3893         agentDhcpScopeState,
 3894         agentDhcpScopeRowStatus,
 3895         agentSnmpTrapPortNumber,
 3896         agentSnmpVersion1Status,
 3897         agentSnmpVersion2cStatus,
 3898         agentSnmpCommunityName,
 3899         agentSnmpCommunityIPAddress,
 3900         agentSnmpCommunityIPMask,
 3901         agentSnmpCommunityAccessMode,
 3902         agentSnmpCommunityEnabled,
 3903         agentSnmpCommunityStatus,
 3904         agentSnmpTrapReceiverName,
 3905         agentSnmpTrapReceiverIPAddress,
 3906         agentSnmpTrapReceiverEnabled,
 3907         agentSnmpTrapReceiverStatus,
 3908         agentSnmpAuthenticationTrapFlag,
 3909         agentSnmpLinkUpDownTrapFlag,
 3910         agentSnmpMultipleUsersTrapFlag,
 3911         agentSnmpSpanningTreeTrapFlag,
 3912         agentSnmpVersion3Status,
 3913         agentSnmpV3UserName,
 3914         agentSnmpV3UserAccessMode,
 3915         agentSnmpV3UserAuthenticationType,
 3916         agentSnmpV3UserEncryptionType,
 3917         agentSnmpV3UserAuthenticationPassword,
 3918         agentSnmpV3UserEncryptionPassword,
 3919         agentSnmpV3UserStatus,
 3920         agentSpanningTreeMode,
 3921         agentSwitchAddressAgingTimeout,
 3922         agentSwitchBroadcastControlMode,
 3923         agentSwitchDot3FlowControlMode,
 3924         agentSwitchLwappTransportMode,
 3925         agentTransferUploadMode,
 3926         agentTransferUploadServerIP,
 3927         agentTransferUploadPath,
 3928         agentTransferUploadFilename,
 3929         agentTransferUploadDataType,
 3930         agentTransferUploadStart,
 3931         agentTransferUploadStatus,
 3932         agentTransferConfigurationFileEncryption,
 3933         agentTransferConfigurationFileEncryptionKey,
 3934         agentTransferDownloadMode,
 3935         agentTransferDownloadServerIP,
 3936         agentTransferDownloadPath,
 3937         agentTransferDownloadFilename,
 3938         agentTransferDownloadDataType,
 3939         agentTransferDownloadStart,
 3940         agentTransferDownloadStatus,
 3941         agentTransferDownloadTftpMaxRetries,
 3942         agentTransferDownloadTftpTimeout,
 3943         agentPortDot1dBasePort,
 3944         agentPortIfIndex,
 3945         agentPortIanaType,
 3946         agentPortSTPMode,
 3947         agentPortSTPState,
 3948         agentPortAdminMode,
 3949         agentPortPhysicalMode,
 3950         agentPortPhysicalStatus,
 3951         agentPortLinkTrapMode,
 3952         agentPortClearStats,
 3953         agentPortDefaultType,
 3954         agentPortType,
 3955         agentPortAutoNegAdminStatus,
 3956         agentPortDot3FlowControlMode,
 3957         agentPortPowerMode,
 3958         agentPortMirrorMode,
 3959         agentPortMulticastApplianceMode,
 3960         agentPortOperationalStatus
 3961     }
 3962     STATUS      current
 3963     DESCRIPTION
 3964         "This collection of objects provide switching configuration 
 3965          information."
 3966     ::= { bsnSwitchingGroups 2}
 3967 
 3968 bsnSwitchingAgentSystemGroup OBJECT-GROUP
 3969     OBJECTS {
 3970         agentSaveConfig,
 3971         agentClearConfig,
 3972         agentClearLags,
 3973         agentClearLoginSessions,
 3974         agentClearPortStats,
 3975         agentClearSwitchStats,
 3976         agentClearTrapLog,
 3977         agentResetSystem
 3978     }
 3979     STATUS      current
 3980     DESCRIPTION
 3981         "This collection of objects provide switching system 
 3982          information and config."
 3983     ::= { bsnSwitchingGroups 3 }
 3984 
 3985 
 3986 bsnSwitchingAgentStatsGroup OBJECT-GROUP
 3987     OBJECTS {
 3988         portStatsIndex,
 3989         portStatsPktsTx64Octets,
 3990         portStatsPktsTx65to127Octets,
 3991         portStatsPktsTx128to255Octets,
 3992         portStatsPktsTx256to511Octets,
 3993         portStatsPktsTx512to1023Octets,
 3994         portStatsPktsTx1024to1518Octets,
 3995         portStatsPktsRx1519to1530Octets,
 3996         portStatsPktsTx1519to1530Octets,
 3997         portStatsPktsTxOversizeOctets
 3998     }
 3999     STATUS      current
 4000     DESCRIPTION
 4001         "This collection of objects provide switching statistics."
 4002     ::= { bsnSwitchingGroups 4 }
 4003 
 4004 bsnSwitchingObsGroup OBJECT-GROUP
 4005     OBJECTS {
 4006         agentLagConfigCreate,
 4007         agentLagSummaryName,
 4008         agentLagSummaryLagIndex,
 4009         agentLagSummaryLinkTrap,
 4010         agentLagSummaryAdminMode,
 4011         agentLagSummaryStpMode,
 4012         agentLagSummaryAddPort,
 4013         agentLagSummaryDeletePort,
 4014         agentLagSummaryPortsBitMask,
 4015         agentLagSummaryStatus,
 4016         agentLagDetailedLagIndex,
 4017         agentLagDetailedIfIndex,
 4018         agentLagDetailedPortSpeed,
 4019         agentLagConfigMode,
 4020         agentServicePortIPAddress,
 4021         agentServicePortSubnetMask,
 4022         agentServicePortBurnedInMacAddress,
 4023         agentServicePortConfigProtocol,
 4024         agentSnmpBroadcastStormTrapFlag,
 4025         agentDot3adAggPort,
 4026         agentDot3adAggPortLACPMode,
 4027         agentNetworkGvrpStatus,
 4028         agentPortGvrpStatus,
 4029         agentPortGarpJoinTime,
 4030         agentPortGarpLeaveTime,
 4031         agentPortGarpLeaveAllTime,
 4032         agentLagSummaryFlushTimer,
 4033         agentServicePortDefaultGateway
 4034     }
 4035     STATUS      obsolete
 4036     DESCRIPTION
 4037         "This collection of objects are  obsoleted in bsnSwitching
 4038          module."
 4039     ::= { bsnSwitchingGroups 5 }
 4040 
 4041 bsnSwitchingTrap NOTIFICATION-GROUP
 4042     NOTIFICATIONS {
 4043         multipleUsersTrap,
 4044         broadcastStormStartTrap,
 4045         broadcastStormEndTrap,
 4046         linkFailureTrap,
 4047         vlanRequestFailureTrap,
 4048         vlanDeleteLastTrap,
 4049         vlanDefaultCfgFailureTrap,
 4050         vlanRestoreFailureTrap,
 4051         fanFailureTrap,
 4052         stpInstanceNewRootTrap,
 4053         stpInstanceTopologyChangeTrap,
 4054         powerSupplyStatusChangeTrap
 4055     }
 4056     STATUS      current
 4057     DESCRIPTION
 4058         "This  collection of objects provides switching related 
 4059          notification."
 4060     ::= { bsnSwitchingGroups 6 }
 4061 
 4062 --********************************************************************
 4063 --*   End of units of conformance
 4064 --********************************************************************
 4065 
 4066 
 4067 END