perl-5.30.3.tar.xz: perl-5.30.3/NetWare/config_H.wc

"Fossies" - the Fresh Open Source Software Archive

Member "perl-5.30.3/NetWare/config_H.wc" (14 May 2020, 101154 Bytes) of package /linux/misc/perl-5.30.3.tar.xz:

As a special service "Fossies" has tried to format the requested source page into HTML format using (guessed) C and C++ source code syntax highlighting (style: standard) with prefixed line numbers and code folding option. Alternatively you can here view or download the uninterpreted source code file. See also the latest Fossies "Diffs" side-by-side code changes report for "config_H.wc":

5.30.2_vs_5.30.3.

1 /* 2 * This file was produced by running the config_h.SH script, which 3 * gets its values from undef, which is generally produced by 4 * running Configure. 5 * 6 * Feel free to modify any of this as the need arises. Note, however, 7 * that running config_h.SH again will wipe out any changes you've made. 8 * For a more permanent change edit undef and rerun config_h.SH. 9 * 10 * $Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $ 11 */ 12 13 /* 14 * Package name : perl5 15 * Source directory : 16 * Configuration time: Thu Jun 21 17:44:02 2001 17 * Configured by : Administrator 18 * Target system : 19 */ 20 21 #ifndef _config_h_ 22 #define _config_h_ 23 24 /* LOC_SED: 25 * This symbol holds the complete pathname to the sed program. 26 */ 27 #define LOC_SED "" /**/ 28 29 /* HAS_AINTL: 30 * This symbol, if defined, indicates that the aintl routine is 31 * available. If copysignl is also present we can emulate modfl. 32 */ 33 /*#define HAS_AINTL / **/ 34 35 /* HAS_ALARM: 36 * This symbol, if defined, indicates that the alarm routine is 37 * available. 38 */ 39 /*#define HAS_ALARM /**/ 40 41 /* HASATTRIBUTE: 42 * This symbol indicates the C compiler can check for function attributes, 43 * such as printf formats. This is normally only supported by GNU cc. 44 */ 45 /*#define HASATTRIBUTE /**/ 46 #ifndef HASATTRIBUTE 47 #ifdef __attribute__ 48 #undef __attribute__ 49 #endif 50 #define __attribute__(_arg_) 51 #endif 52 53 /* HAS_CHOWN: 54 * This symbol, if defined, indicates that the chown routine is 55 * available. 56 */ 57 /*#define HAS_CHOWN /**/ 58 59 /* HAS_CHROOT: 60 * This symbol, if defined, indicates that the chroot routine is 61 * available. 62 */ 63 /*#define HAS_CHROOT /**/ 64 65 /* HAS_CHSIZE: 66 * This symbol, if defined, indicates that the chsize routine is available 67 * to truncate files. You might need a -lx to get this routine. 68 */ 69 #define HAS_CHSIZE /**/ 70 71 /* HAS_CRYPT: 72 * This symbol, if defined, indicates that the crypt routine is available 73 * to encrypt passwords and the like. 74 */ 75 /*#define HAS_CRYPT /**/ 76 77 /* HAS_CUSERID: 78 * This symbol, if defined, indicates that the cuserid routine is 79 * available to get character login names. 80 */ 81 /*#define HAS_CUSERID /**/ 82 83 /* HAS_DIFFTIME: 84 * This symbol, if defined, indicates that the difftime routine is 85 * available. 86 */ 87 #define HAS_DIFFTIME /**/ 88 89 /* HAS_DLERROR: 90 * This symbol, if defined, indicates that the dlerror routine is 91 * available to return a string describing the last error that 92 * occurred from a call to dlopen(), dlclose() or dlsym(). 93 */ 94 #define HAS_DLERROR /**/ 95 96 /* HAS_DUP2: 97 * This symbol, if defined, indicates that the dup2 routine is 98 * available to duplicate file descriptors. 99 */ 100 #define HAS_DUP2 /**/ 101 102 /* HAS_FAST_STDIO: 103 * This symbol, if defined, indicates that the "fast stdio" 104 * is available to manipulate the stdio buffers directly. 105 */ 106 /*#define HAS_FAST_STDIO /**/ 107 108 /* HAS_FCHDIR: 109 * This symbol, if defined, indicates that the fchdir routine is 110 * available to change directory using a file descriptor. 111 */ 112 /*#define HAS_FCHDIR /**/ 113 114 /* HAS_FCHMOD: 115 * This symbol, if defined, indicates that the fchmod routine is available 116 * to change mode of opened files. If unavailable, use chmod(). 117 */ 118 /*#define HAS_FCHMOD /**/ 119 120 /* HAS_FCHOWN: 121 * This symbol, if defined, indicates that the fchown routine is available 122 * to change ownership of opened files. If unavailable, use chown(). 123 */ 124 /*#define HAS_FCHOWN /**/ 125 126 /* HAS_FCNTL: 127 * This symbol, if defined, indicates to the C program that 128 * the fcntl() function exists. 129 */ 130 /*#define HAS_FCNTL /**/ 131 132 /* HAS_FGETPOS: 133 * This symbol, if defined, indicates that the fgetpos routine is 134 * available to get the file position indicator, similar to ftell(). 135 */ 136 #define HAS_FGETPOS /**/ 137 138 /* HAS_FLOCK: 139 * This symbol, if defined, indicates that the flock routine is 140 * available to do file locking. 141 */ 142 #define HAS_FLOCK /**/ 143 144 /* HAS_FORK: 145 * This symbol, if defined, indicates that the fork routine is 146 * available. 147 */ 148 /*#define HAS_FORK /**/ 149 150 /* HAS_FSETPOS: 151 * This symbol, if defined, indicates that the fsetpos routine is 152 * available to set the file position indicator, similar to fseek(). 153 */ 154 #define HAS_FSETPOS /**/ 155 156 /* HAS_GETTIMEOFDAY: 157 * This symbol, if defined, indicates that the gettimeofday() system 158 * call is available for a sub-second accuracy clock. Usually, the file 159 * <sys/resource.h> needs to be included (see I_SYS_RESOURCE). 160 * The type "Timeval" should be used to refer to "struct timeval". 161 */ 162 /*#define HAS_GETTIMEOFDAY /**/ 163 #ifdef HAS_GETTIMEOFDAY 164 #define Timeval struct timeval /* Structure used by gettimeofday() */ 165 #endif 166 167 /* HAS_GETGROUPS: 168 * This symbol, if defined, indicates that the getgroups() routine is 169 * available to get the list of process groups. If unavailable, multiple 170 * groups are probably not supported. 171 */ 172 /*#define HAS_GETGROUPS /**/ 173 174 /* HAS_GETLOGIN: 175 * This symbol, if defined, indicates that the getlogin routine is 176 * available to get the login name. 177 */ 178 #define HAS_GETLOGIN /**/ 179 180 /* HAS_GETPGID: 181 * This symbol, if defined, indicates to the C program that 182 * the getpgid(pid) function is available to get the 183 * process group id. 184 */ 185 /*#define HAS_GETPGID /**/ 186 187 /* HAS_GETPGRP2: 188 * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX) 189 * routine is available to get the current process group. 190 */ 191 /*#define HAS_GETPGRP2 /**/ 192 193 /* HAS_GETPPID: 194 * This symbol, if defined, indicates that the getppid routine is 195 * available to get the parent process ID. 196 */ 197 /*#define HAS_GETPPID /**/ 198 199 /* HAS_GETPRIORITY: 200 * This symbol, if defined, indicates that the getpriority routine is 201 * available to get a process's priority. 202 */ 203 /*#define HAS_GETPRIORITY /**/ 204 205 /* HAS_INET_ATON: 206 * This symbol, if defined, indicates to the C program that the 207 * inet_aton() function is available to parse IP address "dotted-quad" 208 * strings. 209 */ 210 /*#define HAS_INET_ATON /**/ 211 212 /* HAS_KILLPG: 213 * This symbol, if defined, indicates that the killpg routine is available 214 * to kill process groups. If unavailable, you probably should use kill 215 * with a negative process number. 216 */ 217 /*#define HAS_KILLPG /**/ 218 219 /* HAS_LINK: 220 * This symbol, if defined, indicates that the link routine is 221 * available to create hard links. 222 */ 223 #define HAS_LINK /**/ 224 225 /* HAS_LOCALECONV: 226 * This symbol, if defined, indicates that the localeconv routine is 227 * available for numeric and monetary formatting conventions. 228 */ 229 #define HAS_LOCALECONV /**/ 230 231 /* HAS_LOCKF: 232 * This symbol, if defined, indicates that the lockf routine is 233 * available to do file locking. 234 */ 235 /*#define HAS_LOCKF /**/ 236 237 /* HAS_LSTAT: 238 * This symbol, if defined, indicates that the lstat routine is 239 * available to do file stats on symbolic links. 240 */ 241 /*#define HAS_LSTAT /**/ 242 243 /* HAS_MBLEN: 244 * This symbol, if defined, indicates that the mblen routine is available 245 * to find the number of bytes in a multibye character. 246 */ 247 #define HAS_MBLEN /**/ 248 249 /* HAS_MBSTOWCS: 250 * This symbol, if defined, indicates that the mbstowcs routine is 251 * available to covert a multibyte string into a wide character string. 252 */ 253 #define HAS_MBSTOWCS /**/ 254 255 /* HAS_MBTOWC: 256 * This symbol, if defined, indicates that the mbtowc routine is available 257 * to covert a multibyte to a wide character. 258 */ 259 #define HAS_MBTOWC /**/ 260 261 /* HAS_MKDIR: 262 * This symbol, if defined, indicates that the mkdir routine is available 263 * to create directories. Otherwise you should fork off a new process to 264 * exec /bin/mkdir. 265 */ 266 #define HAS_MKDIR /**/ 267 268 /* HAS_MKFIFO: 269 * This symbol, if defined, indicates that the mkfifo routine is 270 * available to create FIFOs. Otherwise, mknod should be able to 271 * do it for you. However, if mkfifo is there, mknod might require 272 * super-user privileges which mkfifo will not. 273 */ 274 /*#define HAS_MKFIFO /**/ 275 276 /* HAS_MKTIME: 277 * This symbol, if defined, indicates that the mktime routine is 278 * available. 279 */ 280 #define HAS_MKTIME /**/ 281 282 /* HAS_MSYNC: 283 * This symbol, if defined, indicates that the msync system call is 284 * available to synchronize a mapped file. 285 */ 286 /*#define HAS_MSYNC /**/ 287 288 /* HAS_MUNMAP: 289 * This symbol, if defined, indicates that the munmap system call is 290 * available to unmap a region, usually mapped by mmap(). 291 */ 292 /*#define HAS_MUNMAP /**/ 293 294 /* HAS_NICE: 295 * This symbol, if defined, indicates that the nice routine is 296 * available. 297 */ 298 /*#define HAS_NICE /**/ 299 300 /* HAS_PATHCONF: 301 * This symbol, if defined, indicates that pathconf() is available 302 * to determine file-system related limits and options associated 303 * with a given filename. 304 */ 305 /* HAS_FPATHCONF: 306 * This symbol, if defined, indicates that pathconf() is available 307 * to determine file-system related limits and options associated 308 * with a given open file descriptor. 309 */ 310 /*#define HAS_PATHCONF /**/ 311 /*#define HAS_FPATHCONF /**/ 312 313 /* HAS_PAUSE: 314 * This symbol, if defined, indicates that the pause routine is 315 * available to suspend a process until a signal is received. 316 */ 317 /*#define HAS_PAUSE /**/ 318 319 /* HAS_PIPE: 320 * This symbol, if defined, indicates that the pipe routine is 321 * available to create an inter-process channel. 322 */ 323 #define HAS_PIPE /**/ 324 325 /* HAS_POLL: 326 * This symbol, if defined, indicates that the poll routine is 327 * available to poll active file descriptors. You may safely 328 * include <poll.h> when this symbol is defined. 329 */ 330 /*#define HAS_POLL /**/ 331 332 /* HAS_READDIR: 333 * This symbol, if defined, indicates that the readdir routine is 334 * available to read directory entries. You may have to include 335 * <dirent.h>. See I_DIRENT. 336 */ 337 #define HAS_READDIR /**/ 338 339 /* HAS_SEEKDIR: 340 * This symbol, if defined, indicates that the seekdir routine is 341 * available. You may have to include <dirent.h>. See I_DIRENT. 342 */ 343 #define HAS_SEEKDIR /**/ 344 345 /* HAS_TELLDIR: 346 * This symbol, if defined, indicates that the telldir routine is 347 * available. You may have to include <dirent.h>. See I_DIRENT. 348 */ 349 #define HAS_TELLDIR /**/ 350 351 /* HAS_REWINDDIR: 352 * This symbol, if defined, indicates that the rewinddir routine is 353 * available. You may have to include <dirent.h>. See I_DIRENT. 354 */ 355 #define HAS_REWINDDIR /**/ 356 357 /* HAS_READLINK: 358 * This symbol, if defined, indicates that the readlink routine is 359 * available to read the value of a symbolic link. 360 */ 361 /*#define HAS_READLINK /**/ 362 363 /* HAS_RENAME: 364 * This symbol, if defined, indicates that the rename routine is available 365 * to rename files. Otherwise you should do the unlink(), link(), unlink() 366 * trick. 367 */ 368 #define HAS_RENAME /**/ 369 370 /* HAS_RMDIR: 371 * This symbol, if defined, indicates that the rmdir routine is 372 * available to remove directories. Otherwise you should fork off a 373 * new process to exec /bin/rmdir. 374 */ 375 #define HAS_RMDIR /**/ 376 377 /* HAS_SELECT: 378 * This symbol, if defined, indicates that the select routine is 379 * available to select active file descriptors. If the timeout field 380 * is used, <sys/time.h> may need to be included. 381 */ 382 #define HAS_SELECT /**/ 383 384 /* HAS_SETEGID: 385 * This symbol, if defined, indicates that the setegid routine is available 386 * to change the effective gid of the current program. 387 */ 388 /*#define HAS_SETEGID /**/ 389 390 /* HAS_SETEUID: 391 * This symbol, if defined, indicates that the seteuid routine is available 392 * to change the effective uid of the current program. 393 */ 394 /*#define HAS_SETEUID /**/ 395 396 /* HAS_SETLINEBUF: 397 * This symbol, if defined, indicates that the setlinebuf routine is 398 * available to change stderr or stdout from block-buffered or unbuffered 399 * to a line-buffered mode. 400 */ 401 /*#define HAS_SETLINEBUF /**/ 402 403 /* HAS_SETLOCALE: 404 * This symbol, if defined, indicates that the setlocale routine is 405 * available to handle locale-specific ctype implementations. 406 */ 407 #define HAS_SETLOCALE /**/ 408 409 /* HAS_SETPGID: 410 * This symbol, if defined, indicates that the setpgid(pid, gpid) 411 * routine is available to set process group ID. 412 */ 413 /*#define HAS_SETPGID /**/ 414 415 /* HAS_SETPGRP2: 416 * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX) 417 * routine is available to set the current process group. 418 */ 419 /*#define HAS_SETPGRP2 /**/ 420 421 /* HAS_SETPRIORITY: 422 * This symbol, if defined, indicates that the setpriority routine is 423 * available to set a process's priority. 424 */ 425 /*#define HAS_SETPRIORITY /**/ 426 427 /* HAS_SETREGID: 428 * This symbol, if defined, indicates that the setregid routine is 429 * available to change the real and effective gid of the current 430 * process. 431 */ 432 /* HAS_SETRESGID: 433 * This symbol, if defined, indicates that the setresgid routine is 434 * available to change the real, effective and saved gid of the current 435 * process. 436 */ 437 /*#define HAS_SETREGID /**/ 438 /*#define HAS_SETRESGID /**/ 439 440 /* HAS_SETREUID: 441 * This symbol, if defined, indicates that the setreuid routine is 442 * available to change the real and effective uid of the current 443 * process. 444 */ 445 /* HAS_SETRESUID: 446 * This symbol, if defined, indicates that the setresuid routine is 447 * available to change the real, effective and saved uid of the current 448 * process. 449 */ 450 /*#define HAS_SETREUID /**/ 451 /*#define HAS_SETRESUID /**/ 452 453 /* HAS_SETRGID: 454 * This symbol, if defined, indicates that the setrgid routine is available 455 * to change the real gid of the current program. 456 */ 457 /*#define HAS_SETRGID /**/ 458 459 /* HAS_SETRUID: 460 * This symbol, if defined, indicates that the setruid routine is available 461 * to change the real uid of the current program. 462 */ 463 /*#define HAS_SETRUID /**/ 464 465 /* HAS_SETSID: 466 * This symbol, if defined, indicates that the setsid routine is 467 * available to set the process group ID. 468 */ 469 /*#define HAS_SETSID /**/ 470 471 /* Shmat_t: 472 * This symbol holds the return type of the shmat() system call. 473 * Usually set to 'void *' or 'char *'. 474 */ 475 /* HAS_SHMAT_PROTOTYPE: 476 * This symbol, if defined, indicates that the sys/shm.h includes 477 * a prototype for shmat(). Otherwise, it is up to the program to 478 * guess one. Shmat_t shmat(int, Shmat_t, int) is a good guess, 479 * but not always right so it should be emitted by the program only 480 * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs. 481 */ 482 #define Shmat_t void * /**/ 483 /*#define HAS_SHMAT_PROTOTYPE /**/ 484 485 /* HAS_STRCOLL: 486 * This symbol, if defined, indicates that the strcoll routine is 487 * available to compare strings using collating information. 488 */ 489 #define HAS_STRCOLL /**/ 490 491 /* HAS_STRTOD: 492 * This symbol, if defined, indicates that the strtod routine is 493 * available to provide better numeric string conversion than atof(). 494 */ 495 #define HAS_STRTOD /**/ 496 497 /* HAS_STRTOL: 498 * This symbol, if defined, indicates that the strtol routine is available 499 * to provide better numeric string conversion than atoi() and friends. 500 */ 501 #define HAS_STRTOL /**/ 502 503 /* HAS_STRXFRM: 504 * This symbol, if defined, indicates that the strxfrm() routine is 505 * available to transform strings. 506 */ 507 #define HAS_STRXFRM /**/ 508 509 /* HAS_SYMLINK: 510 * This symbol, if defined, indicates that the symlink routine is available 511 * to create symbolic links. 512 */ 513 /*#define HAS_SYMLINK /**/ 514 515 /* HAS_SYSCALL: 516 * This symbol, if defined, indicates that the syscall routine is 517 * available to call arbitrary system calls. If undefined, that's tough. 518 */ 519 /*#define HAS_SYSCALL /**/ 520 521 /* HAS_SYSCONF: 522 * This symbol, if defined, indicates that sysconf() is available 523 * to determine system related limits and options. 524 */ 525 /*#define HAS_SYSCONF /**/ 526 527 /* HAS_SYSTEM: 528 * This symbol, if defined, indicates that the system routine is 529 * available to issue a shell command. 530 */ 531 #define HAS_SYSTEM /**/ 532 533 /* HAS_TCGETPGRP: 534 * This symbol, if defined, indicates that the tcgetpgrp routine is 535 * available to get foreground process group ID. 536 */ 537 /*#define HAS_TCGETPGRP /**/ 538 539 /* HAS_TCSETPGRP: 540 * This symbol, if defined, indicates that the tcsetpgrp routine is 541 * available to set foreground process group ID. 542 */ 543 /*#define HAS_TCSETPGRP /**/ 544 545 /* HAS_TRUNCATE: 546 * This symbol, if defined, indicates that the truncate routine is 547 * available to truncate files. 548 */ 549 /*#define HAS_TRUNCATE /**/ 550 551 /* HAS_TZNAME: 552 * This symbol, if defined, indicates that the tzname[] array is 553 * available to access timezone names. 554 */ 555 #define HAS_TZNAME /**/ 556 557 /* HAS_UMASK: 558 * This symbol, if defined, indicates that the umask routine is 559 * available to set and get the value of the file creation mask. 560 */ 561 #define HAS_UMASK /**/ 562 563 /* HAS_USLEEP: 564 * This symbol, if defined, indicates that the usleep routine is 565 * available to let the process sleep on a sub-second accuracy. 566 */ 567 /*#define HAS_USLEEP /**/ 568 569 /* HAS_WAIT4: 570 * This symbol, if defined, indicates that wait4() exists. 571 */ 572 /*#define HAS_WAIT4 /**/ 573 574 /* HAS_WAITPID: 575 * This symbol, if defined, indicates that the waitpid routine is 576 * available to wait for child process. 577 */ 578 #define HAS_WAITPID /**/ 579 580 /* HAS_WCSTOMBS: 581 * This symbol, if defined, indicates that the wcstombs routine is 582 * available to convert wide character strings to multibyte strings. 583 */ 584 #define HAS_WCSTOMBS /**/ 585 586 /* HAS_WCTOMB: 587 * This symbol, if defined, indicates that the wctomb routine is available 588 * to covert a wide character to a multibyte. 589 */ 590 #define HAS_WCTOMB /**/ 591 592 /* I_ARPA_INET: 593 * This symbol, if defined, indicates to the C program that it should 594 * include <arpa/inet.h> to get inet_addr and friends declarations. 595 */ 596 #define I_ARPA_INET /**/ 597 598 /* I_DBM: 599 * This symbol, if defined, indicates that <dbm.h> exists and should 600 * be included. 601 */ 602 /* I_RPCSVC_DBM: 603 * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and 604 * should be included. 605 */ 606 /*#define I_DBM /**/ 607 #define I_RPCSVC_DBM /**/ 608 609 /* I_DIRENT: 610 * This symbol, if defined, indicates to the C program that it should 611 * include <dirent.h>. Using this symbol also triggers the definition 612 * of the Direntry_t define which ends up being 'struct dirent' or 613 * 'struct direct' depending on the availability of <dirent.h>. 614 */ 615 /* DIRNAMLEN: 616 * This symbol, if defined, indicates to the C program that the length 617 * of directory entry names is provided by a d_namlen field. Otherwise 618 * you need to do strlen() on the d_name field. 619 */ 620 /* Direntry_t: 621 * This symbol is set to 'struct direct' or 'struct dirent' depending on 622 * whether dirent is available or not. You should use this pseudo type to 623 * portably declare your directory entries. 624 */ 625 #define I_DIRENT /**/ 626 /*#define DIRNAMLEN /**/ 627 #define Direntry_t DIR 628 629 /* I_DLFCN: 630 * This symbol, if defined, indicates that <dlfcn.h> exists and should 631 * be included. 632 */ 633 #define I_DLFCN /**/ 634 635 /* I_FCNTL: 636 * This manifest constant tells the C program to include <fcntl.h>. 637 */ 638 #define I_FCNTL /**/ 639 640 /* I_LOCALE: 641 * This symbol, if defined, indicates to the C program that it should 642 * include <locale.h>. 643 */ 644 #define I_LOCALE /**/ 645 646 /* I_NDBM: 647 * This symbol, if defined, indicates that <ndbm.h> exists and should 648 * be included. 649 */ 650 /*#define I_NDBM /**/ 651 652 /* I_NET_ERRNO: 653 * This symbol, if defined, indicates that <net/errno.h> exists and 654 * should be included. 655 */ 656 /*#define I_NET_ERRNO /**/ 657 658 /* I_NETINET_IN: 659 * This symbol, if defined, indicates to the C program that it should 660 * include <netinet/in.h>. Otherwise, you may try <sys/in.h>. 661 */ 662 #define I_NETINET_IN /**/ 663 664 /* I_SYS_DIR: 665 * This symbol, if defined, indicates to the C program that it should 666 * include <sys/dir.h>. 667 */ 668 /*#define I_SYS_DIR /**/ 669 670 /* I_SYS_FILE: 671 * This symbol, if defined, indicates to the C program that it should 672 * include <sys/file.h> to get definition of R_OK and friends. 673 */ 674 /*#define I_SYS_FILE /**/ 675 676 /* I_SYS_IOCTL: 677 * This symbol, if defined, indicates that <sys/ioctl.h> exists and should 678 * be included. Otherwise, include <sgtty.h> or <termio.h>. 679 */ 680 /* I_SYS_SOCKIO: 681 * This symbol, if defined, indicates the <sys/sockio.h> should be included 682 * to get socket ioctl options, like SIOCATMARK. 683 */ 684 #define I_SYS_IOCTL /**/ 685 #define I_SYS_SOCKIO /**/ 686 687 /* I_SYS_NDIR: 688 * This symbol, if defined, indicates to the C program that it should 689 * include <sys/ndir.h>. 690 */ 691 /*#define I_SYS_NDIR /**/ 692 693 /* I_SYS_PARAM: 694 * This symbol, if defined, indicates to the C program that it should 695 * include <sys/param.h>. 696 */ 697 /*#define I_SYS_PARAM /**/ 698 699 /* I_SYS_RESOURCE: 700 * This symbol, if defined, indicates to the C program that it should 701 * include <sys/resource.h>. 702 */ 703 /*#define I_SYS_RESOURCE /**/ 704 705 /* I_SYS_SELECT: 706 * This symbol, if defined, indicates to the C program that it should 707 * include <sys/select.h> in order to get definition of struct timeval. 708 */ 709 /*#define I_SYS_SELECT /**/ 710 711 /* I_SYS_STAT: 712 * This symbol, if defined, indicates to the C program that it should 713 * include <sys/stat.h>. 714 */ 715 #define I_SYS_STAT /**/ 716 717 /* I_SYS_TIMES: 718 * This symbol, if defined, indicates to the C program that it should 719 * include <sys/times.h>. 720 */ 721 /*#define I_SYS_TIMES /**/ 722 723 /* I_SYS_TYPES: 724 * This symbol, if defined, indicates to the C program that it should 725 * include <sys/types.h>. 726 */ 727 #define I_SYS_TYPES /**/ 728 729 /* I_SYS_UN: 730 * This symbol, if defined, indicates to the C program that it should 731 * include <sys/un.h> to get UNIX domain socket definitions. 732 */ 733 /*#define I_SYS_UN /**/ 734 735 /* I_SYS_WAIT: 736 * This symbol, if defined, indicates to the C program that it should 737 * include <sys/wait.h>. 738 */ 739 /*#define I_SYS_WAIT /**/ 740 741 /* I_TERMIO: 742 * This symbol, if defined, indicates that the program should include 743 * <termio.h> rather than <sgtty.h>. There are also differences in 744 * the ioctl() calls that depend on the value of this symbol. 745 */ 746 /* I_TERMIOS: 747 * This symbol, if defined, indicates that the program should include 748 * the POSIX termios.h rather than sgtty.h or termio.h. 749 * There are also differences in the ioctl() calls that depend on the 750 * value of this symbol. 751 */ 752 /* I_SGTTY: 753 * This symbol, if defined, indicates that the program should include 754 * <sgtty.h> rather than <termio.h>. There are also differences in 755 * the ioctl() calls that depend on the value of this symbol. 756 */ 757 /*#define I_TERMIO /**/ 758 /*#define I_TERMIOS /**/ 759 /*#define I_SGTTY /**/ 760 761 /* I_UNISTD: 762 * This symbol, if defined, indicates to the C program that it should 763 * include <unistd.h>. 764 */ 765 /*#define I_UNISTD /**/ 766 767 /* I_UTIME: 768 * This symbol, if defined, indicates to the C program that it should 769 * include <utime.h>. 770 */ 771 #define I_UTIME /**/ 772 773 /* I_VFORK: 774 * This symbol, if defined, indicates to the C program that it should 775 * include vfork.h. 776 */ 777 /*#define I_VFORK /**/ 778 779 /* SH_PATH: 780 * This symbol contains the full pathname to the shell used on this 781 * on this system to execute Bourne shell scripts. Usually, this will be 782 * /bin/sh, though it's possible that some systems will have /bin/ksh, 783 * /bin/pdksh, /bin/ash, /bin/bash, or even something such as 784 * D:/bin/sh.exe. 785 */ 786 #define SH_PATH "cmd /x /c" /**/ 787 788 /* INTSIZE: 789 * This symbol contains the value of sizeof(int) so that the C 790 * preprocessor can make decisions based on it. 791 */ 792 /* LONGSIZE: 793 * This symbol contains the value of sizeof(long) so that the C 794 * preprocessor can make decisions based on it. 795 */ 796 /* SHORTSIZE: 797 * This symbol contains the value of sizeof(short) so that the C 798 * preprocessor can make decisions based on it. 799 */ 800 #define INTSIZE 4 /**/ 801 #define LONGSIZE 4 /**/ 802 #define SHORTSIZE 2 /**/ 803 804 /* MULTIARCH: 805 * This symbol, if defined, signifies that the build 806 * process will produce some binary files that are going to be 807 * used in a cross-platform environment. This is the case for 808 * example with the NeXT "fat" binaries that contain executables 809 * for several CPUs. 810 */ 811 /*#define MULTIARCH /**/ 812 813 /* HAS_QUAD: 814 * This symbol, if defined, tells that there's a 64-bit integer type, 815 * Quad_t, and its unsigned counterpart, Uquad_t. QUADKIND will be one 816 * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T. 817 */ 818 /*#define HAS_QUAD /**/ 819 #ifdef HAS_QUAD 820 # define Quad_t __int64 /**/ 821 # define Uquad_t unsigned __int64 /**/ 822 # define QUADKIND 5 /**/ 823 # define QUAD_IS_INT 1 824 # define QUAD_IS_LONG 2 825 # define QUAD_IS_LONG_LONG 3 826 # define QUAD_IS_INT64_T 4 827 #endif 828 829 /* HAS_ACCESSX: 830 * This symbol, if defined, indicates that the accessx routine is 831 * available to do extended access checks. 832 */ 833 /*#define HAS_ACCESSX /**/ 834 835 /* HAS_EACCESS: 836 * This symbol, if defined, indicates that the eaccess routine is 837 * available to do extended access checks. 838 */ 839 /*#define HAS_EACCESS /**/ 840 841 /* I_SYS_ACCESS: 842 * This symbol, if defined, indicates to the C program that it should 843 * include <sys/access.h>. 844 */ 845 /*#define I_SYS_ACCESS /**/ 846 847 /* I_SYS_SECURITY: 848 * This symbol, if defined, indicates to the C program that it should 849 * include <sys/security.h>. 850 */ 851 /*#define I_SYS_SECURITY /**/ 852 853 /* OSNAME: 854 * This symbol contains the name of the operating system, as determined 855 * by Configure. You shouldn't rely on it too much; the specific 856 * feature tests from Configure are generally more reliable. 857 */ 858 /* OSVERS: 859 * This symbol contains the version of the operating system, as determined 860 * by Configure. You shouldn't rely on it too much; the specific 861 * feature tests from Configure are generally more reliable. 862 */ 863 #define OSNAME "NetWare" /**/ 864 #define OSVERS "5.x" /**/ 865 866 /* MEM_ALIGNBYTES: 867 * This symbol contains the number of bytes required to align a 868 * double, or a long double when applicable. Usual values are 2, 869 * 4 and 8. The default is eight, for safety. 870 */ 871 #if defined(MULTIARCH) 872 # define MEM_ALIGNBYTES 8 873 #else 874 #define MEM_ALIGNBYTES 8 875 #endif 876 877 /* ARCHLIB: 878 * This variable, if defined, holds the name of the directory in 879 * which the user wants to put architecture-dependent public 880 * library files for perl5. It is most often a local directory 881 * such as /usr/local/lib. Programs using this variable must be 882 * prepared to deal with filename expansion. If ARCHLIB is the 883 * same as PRIVLIB, it is not defined, since presumably the 884 * program already searches PRIVLIB. 885 */ 886 /* ARCHLIB_EXP: 887 * This symbol contains the ~name expanded version of ARCHLIB, to be used 888 * in programs that are not prepared to deal with ~ expansion at run-time. 889 */ 890 #define ARCHLIB "c:\\perl\\5.30.3\\lib\\NetWare-x86-multi-thread" /**/ 891 /*#define ARCHLIB_EXP "" /**/ 892 893 /* ARCHNAME: 894 * This symbol holds a string representing the architecture name. 895 * It may be used to construct an architecture-dependant pathname 896 * where library files may be held under a private library, for 897 * instance. 898 */ 899 #define ARCHNAME "NetWare-x86-multi-thread" /**/ 900 901 /* HAS_ATOLF: 902 * This symbol, if defined, indicates that the atolf routine is 903 * available to convert strings into long doubles. 904 */ 905 /*#define HAS_ATOLF /**/ 906 907 /* HAS_ATOLL: 908 * This symbol, if defined, indicates that the atoll routine is 909 * available to convert strings into long longs. 910 */ 911 /*#define HAS_ATOLL /**/ 912 913 /* BIN: 914 * This symbol holds the path of the bin directory where the package will 915 * be installed. Program must be prepared to deal with ~name substitution. 916 */ 917 /* BIN_EXP: 918 * This symbol is the filename expanded version of the BIN symbol, for 919 * programs that do not want to deal with that at run-time. 920 */ 921 #define BIN "c:\\perl\\5.30.3\\bin\\NetWare-x86-multi-thread" /**/ 922 #define BIN_EXP "c:\\perl\\5.30.3\\bin\\NetWare-x86-multi-thread" /**/ 923 924 /* BYTEORDER: 925 * This symbol holds the hexadecimal constant defined in byteorder, 926 * i.e. 0x1234 or 0x4321, etc... 927 * If the compiler supports cross-compiling or multiple-architecture 928 * binaries (eg. on NeXT systems), use compiler-defined macros to 929 * determine the byte order. 930 * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture 931 * Binaries (MAB) on either big endian or little endian machines. 932 * The endian-ness is available at compile-time. This only matters 933 * for perl, where the config.h can be generated and installed on 934 * one system, and used by a different architecture to build an 935 * extension. Older versions of NeXT that might not have 936 * defined either *_ENDIAN__ were all on Motorola 680x0 series, 937 * so the default case (for NeXT) is big endian to catch them. 938 * This might matter for NeXT 3.0. 939 */ 940 #if defined(MULTIARCH) 941 # ifdef __LITTLE_ENDIAN__ 942 # if LONGSIZE == 4 943 # define BYTEORDER 0x1234 944 # else 945 # if LONGSIZE == 8 946 # define BYTEORDER 0x12345678 947 # endif 948 # endif 949 # else 950 # ifdef __BIG_ENDIAN__ 951 # if LONGSIZE == 4 952 # define BYTEORDER 0x4321 953 # else 954 # if LONGSIZE == 8 955 # define BYTEORDER 0x87654321 956 # endif 957 # endif 958 # endif 959 # endif 960 # if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__)) 961 # define BYTEORDER 0x4321 962 # endif 963 #else 964 #define BYTEORDER 0x1234 /* large digits for MSB */ 965 #endif /* NeXT */ 966 967 /* CAT2: 968 * This macro catenates 2 tokens together. 969 */ 970 /* STRINGIFY: 971 * This macro surrounds its token with double quotes. 972 */ 973 #if 42 == 1 974 #define CAT2(a,b) a/**/b 975 #define STRINGIFY(a) "a" 976 /* If you can get stringification with catify, tell me how! */ 977 #endif 978 #if 42 == 42 979 #define PeRl_CaTiFy(a, b) a ## b 980 #define PeRl_StGiFy(a) #a 981 /* the additional level of indirection enables these macros to be 982 * used as arguments to other macros. See K&R 2nd ed., page 231. */ 983 #define CAT2(a,b) PeRl_CaTiFy(a,b) 984 #define StGiFy(a) PeRl_StGiFy(a) 985 #define STRINGIFY(a) PeRl_StGiFy(a) 986 #endif 987 #if 42 != 1 && 42 != 42 988 # include "Bletch: How does this C preprocessor concatenate tokens?" 989 #endif 990 991 /* CPPSTDIN: 992 * This symbol contains the first part of the string which will invoke 993 * the C preprocessor on the standard input and produce to standard 994 * output. Typical value of "cc -E" or "/lib/cpp", but it can also 995 * call a wrapper. See CPPRUN. 996 */ 997 /* CPPMINUS: 998 * This symbol contains the second part of the string which will invoke 999 * the C preprocessor on the standard input and produce to standard 1000 * output. This symbol will have the value "-" if CPPSTDIN needs a minus 1001 * to specify standard input, otherwise the value is "". 1002 */ 1003 /* CPPRUN: 1004 * This symbol contains the string which will invoke a C preprocessor on 1005 * the standard input and produce to standard output. It needs to end 1006 * with CPPLAST, after all other preprocessor flags have been specified. 1007 * The main difference with CPPSTDIN is that this program will never be a 1008 * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is 1009 * available directly to the user. Note that it may well be different from 1010 * the preprocessor used to compile the C program. 1011 */ 1012 /* CPPLAST: 1013 * This symbol is intended to be used along with CPPRUN in the same manner 1014 * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "". 1015 */ 1016 #define CPPSTDIN "cl -nologo -E" 1017 #define CPPMINUS "" 1018 #define CPPRUN "cl -nologo -E" 1019 #define CPPLAST "" 1020 1021 /* HAS__FWALK: 1022 * This symbol, if defined, indicates that the _fwalk system call is 1023 * available to apply a function to all the file handles. 1024 */ 1025 /*#define HAS__FWALK /**/ 1026 1027 /* HAS_ACCESS: 1028 * This manifest constant lets the C program know that the access() 1029 * system call is available to check for accessibility using real UID/GID. 1030 * (always present on UNIX.) 1031 */ 1032 #define HAS_ACCESS /**/ 1033 1034 /* CASTI32: 1035 * This symbol is defined if the C compiler can cast negative 1036 * or large floating point numbers to 32-bit ints. 1037 */ 1038 /*#define CASTI32 /**/ 1039 1040 /* CASTNEGFLOAT: 1041 * This symbol is defined if the C compiler can cast negative 1042 * numbers to unsigned longs, ints and shorts. 1043 */ 1044 /* CASTFLAGS: 1045 * This symbol contains flags that say what difficulties the compiler 1046 * has casting odd floating values to unsigned long: 1047 * 0 = ok 1048 * 1 = couldn't cast < 0 1049 * 2 = couldn't cast >= 0x80000000 1050 * 4 = couldn't cast in argument expression list 1051 */ 1052 #define CASTNEGFLOAT /**/ 1053 #define CASTFLAGS 0 /**/ 1054 1055 /* VOID_CLOSEDIR: 1056 * This symbol, if defined, indicates that the closedir() routine 1057 * does not return a value. 1058 */ 1059 /*#define VOID_CLOSEDIR /**/ 1060 1061 /* HAS_STRUCT_CMSGHDR: 1062 * This symbol, if defined, indicates that the struct cmsghdr 1063 * is supported. 1064 */ 1065 /*#define HAS_STRUCT_CMSGHDR /**/ 1066 1067 /* HAS_CSH: 1068 * This symbol, if defined, indicates that the C-shell exists. 1069 */ 1070 /* CSH: 1071 * This symbol, if defined, contains the full pathname of csh. 1072 */ 1073 /*#define HAS_CSH /**/ 1074 #ifdef HAS_CSH 1075 #define CSH "" /**/ 1076 #endif 1077 1078 /* DLSYM_NEEDS_UNDERSCORE: 1079 * This symbol, if defined, indicates that we need to prepend an 1080 * underscore to the symbol name before calling dlsym(). This only 1081 * makes sense if you *have* dlsym, which we will presume is the 1082 * case if you're using dl_dlopen.xs. 1083 */ 1084 /*#define DLSYM_NEEDS_UNDERSCORE /**/ 1085 1086 /* HAS_DRAND48_PROTO: 1087 * This symbol, if defined, indicates that the system provides 1088 * a prototype for the drand48() function. Otherwise, it is up 1089 * to the program to supply one. A good guess is 1090 * extern double drand48(void); 1091 */ 1092 /*#define HAS_DRAND48_PROTO /**/ 1093 1094 /* HAS_ENDGRENT: 1095 * This symbol, if defined, indicates that the getgrent routine is 1096 * available for finalizing sequential access of the group database. 1097 */ 1098 /*#define HAS_ENDGRENT /**/ 1099 1100 /* HAS_ENDHOSTENT: 1101 * This symbol, if defined, indicates that the endhostent() routine is 1102 * available to close whatever was being used for host queries. 1103 */ 1104 /*#define HAS_ENDHOSTENT /**/ 1105 1106 /* HAS_ENDNETENT: 1107 * This symbol, if defined, indicates that the endnetent() routine is 1108 * available to close whatever was being used for network queries. 1109 */ 1110 /*#define HAS_ENDNETENT /**/ 1111 1112 /* HAS_ENDPROTOENT: 1113 * This symbol, if defined, indicates that the endprotoent() routine is 1114 * available to close whatever was being used for protocol queries. 1115 */ 1116 /*#define HAS_ENDPROTOENT /**/ 1117 1118 /* HAS_ENDPWENT: 1119 * This symbol, if defined, indicates that the getgrent routine is 1120 * available for finalizing sequential access of the passwd database. 1121 */ 1122 /*#define HAS_ENDPWENT /**/ 1123 1124 /* HAS_ENDSERVENT: 1125 * This symbol, if defined, indicates that the endservent() routine is 1126 * available to close whatever was being used for service queries. 1127 */ 1128 /*#define HAS_ENDSERVENT /**/ 1129 1130 /* FCNTL_CAN_LOCK: 1131 * This symbol, if defined, indicates that fcntl() can be used 1132 * for file locking. Normally on Unix systems this is defined. 1133 * It may be undefined on VMS. 1134 */ 1135 /*#define FCNTL_CAN_LOCK /**/ 1136 1137 /* HAS_FD_SET: 1138 * This symbol, when defined, indicates presence of the fd_set typedef 1139 * in <sys/types.h> 1140 */ 1141 #define HAS_FD_SET /**/ 1142 1143 /* FLEXFILENAMES: 1144 * This symbol, if defined, indicates that the system supports filenames 1145 * longer than 14 characters. 1146 */ 1147 #define FLEXFILENAMES /**/ 1148 1149 /* HAS_FPOS64_T: 1150 * This symbol will be defined if the C compiler supports fpos64_t. 1151 */ 1152 /*#define HAS_FPOS64_T /**/ 1153 1154 /* HAS_FREXPL: 1155 * This symbol, if defined, indicates that the frexpl routine is 1156 * available to break a long double floating-point number into 1157 * a normalized fraction and an integral power of 2. 1158 */ 1159 /*#define HAS_FREXPL /**/ 1160 1161 /* HAS_STRUCT_FS_DATA: 1162 * This symbol, if defined, indicates that the struct fs_data 1163 * to do statfs() is supported. 1164 */ 1165 /*#define HAS_STRUCT_FS_DATA /**/ 1166 1167 /* HAS_FSEEKO: 1168 * This symbol, if defined, indicates that the fseeko routine is 1169 * available to fseek beyond 32 bits (useful for ILP32 hosts). 1170 */ 1171 /*#define HAS_FSEEKO /**/ 1172 1173 /* HAS_FSTATFS: 1174 * This symbol, if defined, indicates that the fstatfs routine is 1175 * available to stat filesystems by file descriptors. 1176 */ 1177 /*#define HAS_FSTATFS /**/ 1178 1179 /* HAS_FSYNC: 1180 * This symbol, if defined, indicates that the fsync routine is 1181 * available to write a file's modified data and attributes to 1182 * permanent storage. 1183 */ 1184 /*#define HAS_FSYNC /**/ 1185 1186 /* HAS_FTELLO: 1187 * This symbol, if defined, indicates that the ftello routine is 1188 * available to ftell beyond 32 bits (useful for ILP32 hosts). 1189 */ 1190 /*#define HAS_FTELLO /**/ 1191 1192 /* Gconvert: 1193 * This preprocessor macro is defined to convert a floating point 1194 * number to a string without a trailing decimal point. This 1195 * emulates the behavior of sprintf("%g"), but is sometimes much more 1196 * efficient. If gconvert() is not available, but gcvt() drops the 1197 * trailing decimal point, then gcvt() is used. If all else fails, 1198 * a macro using sprintf("%g") is used. Arguments for the Gconvert 1199 * macro are: value, number of digits, whether trailing zeros should 1200 * be retained, and the output buffer. 1201 * Possible values are: 1202 * d_Gconvert='gconvert((x),(n),(t),(b))' 1203 * d_Gconvert='gcvt((x),(n),(b))' 1204 * d_Gconvert='sprintf((b),"%.*g",(n),(x))' 1205 * The last two assume trailing zeros should not be kept. 1206 */ 1207 #define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x)) 1208 1209 /* HAS_GETCWD: 1210 * This symbol, if defined, indicates that the getcwd routine is 1211 * available to get the current working directory. 1212 */ 1213 #define HAS_GETCWD /**/ 1214 1215 /* HAS_GETESPWNAM: 1216 * This symbol, if defined, indicates that the getespwnam system call is 1217 * available to retrieve enhanced (shadow) password entries by name. 1218 */ 1219 /*#define HAS_GETESPWNAM /**/ 1220 1221 /* HAS_GETFSSTAT: 1222 * This symbol, if defined, indicates that the getfsstat routine is 1223 * available to stat filesystems in bulk. 1224 */ 1225 /*#define HAS_GETFSSTAT /**/ 1226 1227 /* HAS_GETGRENT: 1228 * This symbol, if defined, indicates that the getgrent routine is 1229 * available for sequential access of the group database. 1230 */ 1231 /*#define HAS_GETGRENT /**/ 1232 1233 /* HAS_GETHOSTBYADDR: 1234 * This symbol, if defined, indicates that the gethostbyaddr() routine is 1235 * available to look up hosts by their IP addresses. 1236 */ 1237 #define HAS_GETHOSTBYADDR /**/ 1238 1239 /* HAS_GETHOSTBYNAME: 1240 * This symbol, if defined, indicates that the gethostbyname() routine is 1241 * available to look up host names in some data base or other. 1242 */ 1243 #define HAS_GETHOSTBYNAME /**/ 1244 1245 /* HAS_GETHOSTENT: 1246 * This symbol, if defined, indicates that the gethostent() routine is 1247 * available to look up host names in some data base or another. 1248 */ 1249 /*#define HAS_GETHOSTENT /**/ 1250 1251 /* HAS_GETHOSTNAME: 1252 * This symbol, if defined, indicates that the C program may use the 1253 * gethostname() routine to derive the host name. See also HAS_UNAME 1254 * and PHOSTNAME. 1255 */ 1256 /* HAS_UNAME: 1257 * This symbol, if defined, indicates that the C program may use the 1258 * uname() routine to derive the host name. See also HAS_GETHOSTNAME 1259 * and PHOSTNAME. 1260 */ 1261 /* PHOSTNAME: 1262 * This symbol, if defined, indicates the command to feed to the 1263 * popen() routine to derive the host name. See also HAS_GETHOSTNAME 1264 * and HAS_UNAME. Note that the command uses a fully qualified path, 1265 * so that it is safe even if used by a process with super-user 1266 * privileges. 1267 */ 1268 /* HAS_PHOSTNAME: 1269 * This symbol, if defined, indicates that the C program may use the 1270 * contents of PHOSTNAME as a command to feed to the popen() routine 1271 * to derive the host name. 1272 */ 1273 #define HAS_GETHOSTNAME /**/ 1274 #define HAS_UNAME /**/ 1275 /*#define HAS_PHOSTNAME /**/ 1276 #ifdef HAS_PHOSTNAME 1277 #define PHOSTNAME "" /* How to get the host name */ 1278 #endif 1279 1280 /* HAS_GETHOST_PROTOS: 1281 * This symbol, if defined, indicates that <netdb.h> includes 1282 * prototypes for gethostent(), gethostbyname(), and 1283 * gethostbyaddr(). Otherwise, it is up to the program to guess 1284 * them. See netdbtype.U for probing for various Netdb_xxx_t types. 1285 */ 1286 #define HAS_GETHOST_PROTOS /**/ 1287 1288 /* HAS_GETITIMER: 1289 * This symbol, if defined, indicates that the getitimer routine is 1290 * available to return interval timers. 1291 */ 1292 /*#define HAS_GETITIMER /**/ 1293 1294 /* HAS_GETMNT: 1295 * This symbol, if defined, indicates that the getmnt routine is 1296 * available to get filesystem mount info by filename. 1297 */ 1298 /*#define HAS_GETMNT /**/ 1299 1300 /* HAS_GETMNTENT: 1301 * This symbol, if defined, indicates that the getmntent routine is 1302 * available to iterate through mounted file systems to get their info. 1303 */ 1304 /*#define HAS_GETMNTENT /**/ 1305 1306 /* HAS_GETNETBYADDR: 1307 * This symbol, if defined, indicates that the getnetbyaddr() routine is 1308 * available to look up networks by their IP addresses. 1309 */ 1310 /*#define HAS_GETNETBYADDR /**/ 1311 1312 /* HAS_GETNETBYNAME: 1313 * This symbol, if defined, indicates that the getnetbyname() routine is 1314 * available to look up networks by their names. 1315 */ 1316 /*#define HAS_GETNETBYNAME /**/ 1317 1318 /* HAS_GETNETENT: 1319 * This symbol, if defined, indicates that the getnetent() routine is 1320 * available to look up network names in some data base or another. 1321 */ 1322 /*#define HAS_GETNETENT /**/ 1323 1324 /* HAS_GETNET_PROTOS: 1325 * This symbol, if defined, indicates that <netdb.h> includes 1326 * prototypes for getnetent(), getnetbyname(), and 1327 * getnetbyaddr(). Otherwise, it is up to the program to guess 1328 * them. See netdbtype.U for probing for various Netdb_xxx_t types. 1329 */ 1330 #define HAS_GETNET_PROTOS /**/ 1331 1332 /* HAS_GETPAGESIZE: 1333 * This symbol, if defined, indicates that the getpagesize system call 1334 * is available to get system page size, which is the granularity of 1335 * many memory management calls. 1336 */ 1337 /*#define HAS_GETPAGESIZE /**/ 1338 1339 /* HAS_GETPROTOENT: 1340 * This symbol, if defined, indicates that the getprotoent() routine is 1341 * available to look up protocols in some data base or another. 1342 */ 1343 /*#define HAS_GETPROTOENT /**/ 1344 1345 /* HAS_GETPGRP: 1346 * This symbol, if defined, indicates that the getpgrp routine is 1347 * available to get the current process group. 1348 */ 1349 /* USE_BSD_GETPGRP: 1350 * This symbol, if defined, indicates that getpgrp needs one 1351 * arguments whereas USG one needs none. 1352 */ 1353 /*#define HAS_GETPGRP /**/ 1354 /*#define USE_BSD_GETPGRP /**/ 1355 1356 /* HAS_GETPROTOBYNAME: 1357 * This symbol, if defined, indicates that the getprotobyname() 1358 * routine is available to look up protocols by their name. 1359 */ 1360 /* HAS_GETPROTOBYNUMBER: 1361 * This symbol, if defined, indicates that the getprotobynumber() 1362 * routine is available to look up protocols by their number. 1363 */ 1364 #define HAS_GETPROTOBYNAME /**/ 1365 #define HAS_GETPROTOBYNUMBER /**/ 1366 1367 /* HAS_GETPROTO_PROTOS: 1368 * This symbol, if defined, indicates that <netdb.h> includes 1369 * prototypes for getprotoent(), getprotobyname(), and 1370 * getprotobyaddr(). Otherwise, it is up to the program to guess 1371 * them. See netdbtype.U for probing for various Netdb_xxx_t types. 1372 */ 1373 #define HAS_GETPROTO_PROTOS /**/ 1374 1375 /* HAS_GETPRPWNAM: 1376 * This symbol, if defined, indicates that the getprpwnam system call is 1377 * available to retrieve protected (shadow) password entries by name. 1378 */ 1379 /*#define HAS_GETPRPWNAM /**/ 1380 1381 /* HAS_GETPWENT: 1382 * This symbol, if defined, indicates that the getpwent routine is 1383 * available for sequential access of the passwd database. 1384 * If this is not available, the older getpw() function may be available. 1385 */ 1386 /*#define HAS_GETPWENT /**/ 1387 1388 /* HAS_GETSERVENT: 1389 * This symbol, if defined, indicates that the getservent() routine is 1390 * available to look up network services in some data base or another. 1391 */ 1392 /*#define HAS_GETSERVENT /**/ 1393 1394 /* HAS_GETSERV_PROTOS: 1395 * This symbol, if defined, indicates that <netdb.h> includes 1396 * prototypes for getservent(), getservbyname(), and 1397 * getservbyaddr(). Otherwise, it is up to the program to guess 1398 * them. See netdbtype.U for probing for various Netdb_xxx_t types. 1399 */ 1400 #define HAS_GETSERV_PROTOS /**/ 1401 1402 /* HAS_GETSPNAM: 1403 * This symbol, if defined, indicates that the getspnam system call is 1404 * available to retrieve SysV shadow password entries by name. 1405 */ 1406 /*#define HAS_GETSPNAM /**/ 1407 1408 /* HAS_GETSERVBYNAME: 1409 * This symbol, if defined, indicates that the getservbyname() 1410 * routine is available to look up services by their name. 1411 */ 1412 /* HAS_GETSERVBYPORT: 1413 * This symbol, if defined, indicates that the getservbyport() 1414 * routine is available to look up services by their port. 1415 */ 1416 #define HAS_GETSERVBYNAME /**/ 1417 #define HAS_GETSERVBYPORT /**/ 1418 1419 /* HAS_GNULIBC: 1420 * This symbol, if defined, indicates to the C program that 1421 * the GNU C library is being used. A better check is to use 1422 * the __GLIBC__ and __GLIBC_MINOR__ symbols supplied with glibc. 1423 */ 1424 /*#define HAS_GNULIBC /**/ 1425 #if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE) 1426 # define _GNU_SOURCE 1427 #endif 1428 /* HAS_HASMNTOPT: 1429 * This symbol, if defined, indicates that the hasmntopt routine is 1430 * available to query the mount options of file systems. 1431 */ 1432 /*#define HAS_HASMNTOPT /**/ 1433 1434 /* HAS_HTONL: 1435 * This symbol, if defined, indicates that the htonl() routine (and 1436 * friends htons() ntohl() ntohs()) are available to do network 1437 * order byte swapping. 1438 */ 1439 /* HAS_HTONS: 1440 * This symbol, if defined, indicates that the htons() routine (and 1441 * friends htonl() ntohl() ntohs()) are available to do network 1442 * order byte swapping. 1443 */ 1444 /* HAS_NTOHL: 1445 * This symbol, if defined, indicates that the ntohl() routine (and 1446 * friends htonl() htons() ntohs()) are available to do network 1447 * order byte swapping. 1448 */ 1449 /* HAS_NTOHS: 1450 * This symbol, if defined, indicates that the ntohs() routine (and 1451 * friends htonl() htons() ntohl()) are available to do network 1452 * order byte swapping. 1453 */ 1454 #define HAS_HTONL /**/ 1455 #define HAS_HTONS /**/ 1456 #define HAS_NTOHL /**/ 1457 #define HAS_NTOHS /**/ 1458 1459 /* HAS_ILOGBL: 1460 * This symbol, if defined, indicates that the ilogbl routine is 1461 * available. If scalbnl is also present we can emulate frexpl. 1462 */ 1463 /*#define HAS_ILOGBL /**/ 1464 1465 /* HAS_INT64_T: 1466 * This symbol will defined if the C compiler supports int64_t. 1467 * Usually the <inttypes.h> needs to be included, but sometimes 1468 * <sys/types.h> is enough. 1469 */ 1470 /*#define HAS_INT64_T /**/ 1471 1472 /* HAS_ISASCII: 1473 * This manifest constant lets the C program know that isascii 1474 * is available. 1475 */ 1476 #define HAS_ISASCII /**/ 1477 1478 /* HAS_ISNAN: 1479 * This symbol, if defined, indicates that the isnan routine is 1480 * available to check whether a double is a NaN. 1481 */ 1482 /*#define HAS_ISNAN /**/ 1483 1484 /* HAS_ISNANL: 1485 * This symbol, if defined, indicates that the isnanl routine is 1486 * available to check whether a long double is a NaN. 1487 */ 1488 /*#define HAS_ISNANL /**/ 1489 1490 /* HAS_LCHOWN: 1491 * This symbol, if defined, indicates that the lchown routine is 1492 * available to operate on a symbolic link (instead of following the 1493 * link). 1494 */ 1495 /*#define HAS_LCHOWN /**/ 1496 1497 /* HAS_LDBL_DIG: 1498 * This symbol, if defined, indicates that this system's <float.h> 1499 * or <limits.h> defines the symbol LDBL_DIG, which is the number 1500 * of significant digits in a long double precision number. Unlike 1501 * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined. 1502 */ 1503 #define HAS_LDBL_DIG /**/ 1504 1505 /* HAS_LONG_DOUBLE: 1506 * This symbol will be defined if the C compiler supports long 1507 * doubles. 1508 */ 1509 /* LONG_DOUBLESIZE: 1510 * This symbol contains the size of a long double, so that the 1511 * C preprocessor can make decisions based on it. It is only 1512 * defined if the system supports long doubles. 1513 */ 1514 #define HAS_LONG_DOUBLE /**/ 1515 #ifdef HAS_LONG_DOUBLE 1516 #define LONG_DOUBLESIZE 10 /**/ 1517 #endif 1518 1519 /* HAS_LONG_LONG: 1520 * This symbol will be defined if the C compiler supports long long. 1521 */ 1522 /* LONGLONGSIZE: 1523 * This symbol contains the size of a long long, so that the 1524 * C preprocessor can make decisions based on it. It is only 1525 * defined if the system supports long long. 1526 */ 1527 /*#define HAS_LONG_LONG /**/ 1528 #ifdef HAS_LONG_LONG 1529 #define LONGLONGSIZE 8 /**/ 1530 #endif 1531 1532 /* HAS_LSEEK_PROTO: 1533 * This symbol, if defined, indicates that the system provides 1534 * a prototype for the lseek() function. Otherwise, it is up 1535 * to the program to supply one. A good guess is 1536 * extern off_t lseek(int, off_t, int); 1537 */ 1538 #define HAS_LSEEK_PROTO /**/ 1539 1540 /* HAS_MADVISE: 1541 * This symbol, if defined, indicates that the madvise system call is 1542 * available to map a file into memory. 1543 */ 1544 /*#define HAS_MADVISE /**/ 1545 1546 /* HAS_MKDTEMP: 1547 * This symbol, if defined, indicates that the mkdtemp routine is 1548 * available to exclusively create a uniquely named temporary directory. 1549 */ 1550 /*#define HAS_MKDTEMP /**/ 1551 1552 /* HAS_MKSTEMP: 1553 * This symbol, if defined, indicates that the mkstemp routine is 1554 * available to exclusively create and open a uniquely named 1555 * temporary file. 1556 */ 1557 /*#define HAS_MKSTEMP /**/ 1558 1559 /* HAS_MKSTEMPS: 1560 * This symbol, if defined, indicates that the mkstemps routine is 1561 * available to exclusively create and open a uniquely named 1562 * (with a suffix) temporary file. 1563 */ 1564 /*#define HAS_MKSTEMPS /**/ 1565 1566 /* HAS_MMAP: 1567 * This symbol, if defined, indicates that the mmap system call is 1568 * available to map a file into memory. 1569 */ 1570 /* Mmap_t: 1571 * This symbol holds the return type of the mmap() system call 1572 * (and simultaneously the type of the first argument). 1573 * Usually set to 'void *' or 'cadd_t'. 1574 */ 1575 /*#define HAS_MMAP /**/ 1576 #define Mmap_t void * /**/ 1577 1578 /* HAS_MODFL: 1579 * This symbol, if defined, indicates that the modfl routine is 1580 * available to split a long double x into a fractional part f and 1581 * an integer part i such that |f| < 1.0 and (f + i) = x. 1582 */ 1583 /*#define HAS_MODFL /**/ 1584 1585 /* HAS_MPROTECT: 1586 * This symbol, if defined, indicates that the mprotect system call is 1587 * available to modify the access protection of a memory mapped file. 1588 */ 1589 /*#define HAS_MPROTECT /**/ 1590 1591 /* HAS_MSG: 1592 * This symbol, if defined, indicates that the entire msg*(2) library is 1593 * supported (IPC mechanism based on message queues). 1594 */ 1595 /*#define HAS_MSG /**/ 1596 1597 /* HAS_STRUCT_MSGHDR: 1598 * This symbol, if defined, indicates that the struct msghdr 1599 * is supported. 1600 */ 1601 /*#define HAS_STRUCT_MSGHDR /**/ 1602 1603 /* HAS_OFF64_T: 1604 * This symbol will be defined if the C compiler supports off64_t. 1605 */ 1606 /*#define HAS_OFF64_T /**/ 1607 1608 /* HAS_OPEN3: 1609 * This manifest constant lets the C program know that the three 1610 * argument form of open(2) is available. 1611 */ 1612 /*#define HAS_OPEN3 /**/ 1613 1614 /* OLD_PTHREAD_CREATE_JOINABLE: 1615 * This symbol, if defined, indicates how to create pthread 1616 * in joinable (aka undetached) state. NOTE: not defined 1617 * if pthread.h already has defined PTHREAD_CREATE_JOINABLE 1618 * (the new version of the constant). 1619 * If defined, known values are PTHREAD_CREATE_UNDETACHED 1620 * and __UNDETACHED. 1621 */ 1622 /*#define OLD_PTHREAD_CREATE_JOINABLE /**/ 1623 1624 /* HAS_PTHREAD_YIELD: 1625 * This symbol, if defined, indicates that the pthread_yield 1626 * routine is available to yield the execution of the current 1627 * thread. sched_yield is preferable to pthread_yield. 1628 */ 1629 /* SCHED_YIELD: 1630 * This symbol defines the way to yield the execution of 1631 * the current thread. Known ways are sched_yield, 1632 * pthread_yield, and pthread_yield with NULL. 1633 */ 1634 /* HAS_SCHED_YIELD: 1635 * This symbol, if defined, indicates that the sched_yield 1636 * routine is available to yield the execution of the current 1637 * thread. sched_yield is preferable to pthread_yield. 1638 */ 1639 /*#define HAS_PTHREAD_YIELD /**/ 1640 #define SCHED_YIELD /**/ 1641 /*#define HAS_SCHED_YIELD /**/ 1642 1643 /* HAS_PTHREAD_ATTR_SETSCOPE: 1644 * This symbol, if defined, indicates that the pthread_attr_setscope 1645 * system call is available to set the contention scope attribute of 1646 * a thread attribute object. 1647 */ 1648 /*#define HAS_PTHREAD_ATTR_SETSCOPE / **/ 1649 1650 /* HAS_READV: 1651 * This symbol, if defined, indicates that the readv routine is 1652 * available to do gather reads. You will also need <sys/uio.h> 1653 * and there I_SYSUIO. 1654 */ 1655 /*#define HAS_READV /**/ 1656 1657 /* HAS_RECVMSG: 1658 * This symbol, if defined, indicates that the recvmsg routine is 1659 * available to send structured socket messages. 1660 */ 1661 /*#define HAS_RECVMSG /**/ 1662 1663 /* HAS_SBRK_PROTO: 1664 * This symbol, if defined, indicates that the system provides 1665 * a prototype for the sbrk() function. Otherwise, it is up 1666 * to the program to supply one. Good guesses are 1667 * extern void* sbrk(int); 1668 * extern void* sbrk(size_t); 1669 */ 1670 /*#define HAS_SBRK_PROTO /**/ 1671 1672 /* HAS_SEM: 1673 * This symbol, if defined, indicates that the entire sem*(2) library is 1674 * supported. 1675 */ 1676 /*#define HAS_SEM /**/ 1677 1678 /* HAS_SCALBNL: 1679 * This symbol, if defined, indicates that the scalbnl routine is 1680 * available. If ilogbl is also present we can emulate frexpl. 1681 */ 1682 /*#define HAS_SCALBNL /**/ 1683 1684 /* HAS_SENDMSG: 1685 * This symbol, if defined, indicates that the sendmsg routine is 1686 * available to send structured socket messages. 1687 */ 1688 /*#define HAS_SENDMSG /**/ 1689 1690 /* HAS_SETGRENT: 1691 * This symbol, if defined, indicates that the setgrent routine is 1692 * available for initializing sequential access of the group database. 1693 */ 1694 /*#define HAS_SETGRENT /**/ 1695 1696 /* HAS_SETGROUPS: 1697 * This symbol, if defined, indicates that the setgroups() routine is 1698 * available to set the list of process groups. If unavailable, multiple 1699 * groups are probably not supported. 1700 */ 1701 /*#define HAS_SETGROUPS /**/ 1702 1703 /* HAS_SETHOSTENT: 1704 * This symbol, if defined, indicates that the sethostent() routine is 1705 * available. 1706 */ 1707 /*#define HAS_SETHOSTENT /**/ 1708 1709 /* HAS_SETITIMER: 1710 * This symbol, if defined, indicates that the setitimer routine is 1711 * available to set interval timers. 1712 */ 1713 /*#define HAS_SETITIMER /**/ 1714 1715 /* HAS_SETNETENT: 1716 * This symbol, if defined, indicates that the setnetent() routine is 1717 * available. 1718 */ 1719 /*#define HAS_SETNETENT /**/ 1720 1721 /* HAS_SETPROTOENT: 1722 * This symbol, if defined, indicates that the setprotoent() routine is 1723 * available. 1724 */ 1725 /*#define HAS_SETPROTOENT /**/ 1726 1727 /* HAS_SETPGRP: 1728 * This symbol, if defined, indicates that the setpgrp routine is 1729 * available to set the current process group. 1730 */ 1731 /* USE_BSD_SETPGRP: 1732 * This symbol, if defined, indicates that setpgrp needs two 1733 * arguments whereas USG one needs none. See also HAS_SETPGID 1734 * for a POSIX interface. 1735 */ 1736 /*#define HAS_SETPGRP /**/ 1737 /*#define USE_BSD_SETPGRP /**/ 1738 1739 /* HAS_SETPROCTITLE: 1740 * This symbol, if defined, indicates that the setproctitle routine is 1741 * available to set process title. 1742 */ 1743 /*#define HAS_SETPROCTITLE /**/ 1744 1745 /* HAS_SETPWENT: 1746 * This symbol, if defined, indicates that the setpwent routine is 1747 * available for initializing sequential access of the passwd database. 1748 */ 1749 /*#define HAS_SETPWENT /**/ 1750 1751 /* HAS_SETSERVENT: 1752 * This symbol, if defined, indicates that the setservent() routine is 1753 * available. 1754 */ 1755 /*#define HAS_SETSERVENT /**/ 1756 1757 /* HAS_SETVBUF: 1758 * This symbol, if defined, indicates that the setvbuf routine is 1759 * available to change buffering on an open stdio stream. 1760 * to a line-buffered mode. 1761 */ 1762 #define HAS_SETVBUF /**/ 1763 1764 /* HAS_SHM: 1765 * This symbol, if defined, indicates that the entire shm*(2) library is 1766 * supported. 1767 */ 1768 /*#define HAS_SHM /**/ 1769 1770 /* HAS_SIGACTION: 1771 * This symbol, if defined, indicates that Vr4's sigaction() routine 1772 * is available. 1773 */ 1774 /*#define HAS_SIGACTION /**/ 1775 1776 /* HAS_SIGSETJMP: 1777 * This variable indicates to the C program that the sigsetjmp() 1778 * routine is available to save the calling process's registers 1779 * and stack environment for later use by siglongjmp(), and 1780 * to optionally save the process's signal mask. See 1781 * Sigjmp_buf, Sigsetjmp, and Siglongjmp. 1782 */ 1783 /* Sigjmp_buf: 1784 * This is the buffer type to be used with Sigsetjmp and Siglongjmp. 1785 */ 1786 /* Sigsetjmp: 1787 * This macro is used in the same way as sigsetjmp(), but will invoke 1788 * traditional setjmp() if sigsetjmp isn't available. 1789 * See HAS_SIGSETJMP. 1790 */ 1791 /* Siglongjmp: 1792 * This macro is used in the same way as siglongjmp(), but will invoke 1793 * traditional longjmp() if siglongjmp isn't available. 1794 * See HAS_SIGSETJMP. 1795 */ 1796 /*#define HAS_SIGSETJMP /**/ 1797 #ifdef HAS_SIGSETJMP 1798 #define Sigjmp_buf sigjmp_buf 1799 #define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask)) 1800 #define Siglongjmp(buf,retval) siglongjmp((buf),(retval)) 1801 #else 1802 #define Sigjmp_buf jmp_buf 1803 #define Sigsetjmp(buf,save_mask) setjmp((buf)) 1804 #define Siglongjmp(buf,retval) longjmp((buf),(retval)) 1805 #endif 1806 1807 /* HAS_STATIC_INLINE: 1808 * This symbol, if defined, indicates that the C compiler supports 1809 * C99-style static inline. That is, the function can't be called 1810 * from another translation unit. 1811 */ 1812 /* PERL_STATIC_INLINE: 1813 * This symbol gives the best-guess incantation to use for static 1814 * inline functions. If HAS_STATIC_INLINE is defined, this will 1815 * give C99-style inline. If HAS_STATIC_INLINE is not defined, 1816 * this will give a plain 'static'. It will always be defined 1817 * to something that gives static linkage. 1818 * Possibilities include 1819 * static inline (c99) 1820 * static __inline__ (gcc -ansi) 1821 * static __inline (MSVC) 1822 * static _inline (older MSVC) 1823 * static (c89 compilers) 1824 */ 1825 /*#define HAS_STATIC_INLINE / **/ 1826 #define PERL_STATIC_INLINE static /**/ 1827 1828 /* HAS_SOCKET: 1829 * This symbol, if defined, indicates that the BSD socket interface is 1830 * supported. 1831 */ 1832 /* HAS_SOCKETPAIR: 1833 * This symbol, if defined, indicates that the BSD socketpair() call is 1834 * supported. 1835 */ 1836 #define HAS_SOCKET /**/ 1837 /*#define HAS_SOCKETPAIR /**/ 1838 1839 /* HAS_SOCKS5_INIT: 1840 * This symbol, if defined, indicates that the socks5_init routine is 1841 * available to initialize SOCKS 5. 1842 */ 1843 /*#define HAS_SOCKS5_INIT /**/ 1844 1845 /* HAS_SQRTL: 1846 * This symbol, if defined, indicates that the sqrtl routine is 1847 * available to do long double square roots. 1848 */ 1849 /*#define HAS_SQRTL /**/ 1850 1851 /* USE_STAT_BLOCKS: 1852 * This symbol is defined if this system has a stat structure declaring 1853 * st_blksize and st_blocks. 1854 */ 1855 #ifndef USE_STAT_BLOCKS 1856 /*#define USE_STAT_BLOCKS /**/ 1857 #endif 1858 1859 /* HAS_STRUCT_STATFS_F_FLAGS: 1860 * This symbol, if defined, indicates that the struct statfs 1861 * does have the f_flags member containing the mount flags of 1862 * the filesystem containing the file. 1863 * This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3), 1864 * not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not 1865 * have statfs() and struct statfs, they have ustat() and getmnt() 1866 * with struct ustat and struct fs_data. 1867 */ 1868 /*#define HAS_STRUCT_STATFS_F_FLAGS /**/ 1869 1870 /* HAS_STRUCT_STATFS: 1871 * This symbol, if defined, indicates that the struct statfs 1872 * to do statfs() is supported. 1873 */ 1874 /*#define HAS_STRUCT_STATFS /**/ 1875 1876 /* HAS_FSTATVFS: 1877 * This symbol, if defined, indicates that the fstatvfs routine is 1878 * available to stat filesystems by file descriptors. 1879 */ 1880 /*#define HAS_FSTATVFS /**/ 1881 1882 /* USE_STDIO_PTR: 1883 * This symbol is defined if the _ptr and _cnt fields (or similar) 1884 * of the stdio FILE structure can be used to access the stdio buffer 1885 * for a file handle. If this is defined, then the FILE_ptr(fp) 1886 * and FILE_cnt(fp) macros will also be defined and should be used 1887 * to access these fields. 1888 */ 1889 /* FILE_ptr: 1890 * This macro is used to access the _ptr field (or equivalent) of the 1891 * FILE structure pointed to by its argument. This macro will always be 1892 * defined if USE_STDIO_PTR is defined. 1893 */ 1894 /* STDIO_PTR_LVALUE: 1895 * This symbol is defined if the FILE_ptr macro can be used as an 1896 * lvalue. 1897 */ 1898 /* FILE_cnt: 1899 * This macro is used to access the _cnt field (or equivalent) of the 1900 * FILE structure pointed to by its argument. This macro will always be 1901 * defined if USE_STDIO_PTR is defined. 1902 */ 1903 /* STDIO_CNT_LVALUE: 1904 * This symbol is defined if the FILE_cnt macro can be used as an 1905 * lvalue. 1906 */ 1907 /* STDIO_PTR_LVAL_SETS_CNT: 1908 * This symbol is defined if using the FILE_ptr macro as an lvalue 1909 * to increase the pointer by n has the side effect of decreasing the 1910 * value of File_cnt(fp) by n. 1911 */ 1912 /* STDIO_PTR_LVAL_NOCHANGE_CNT: 1913 * This symbol is defined if using the FILE_ptr macro as an lvalue 1914 * to increase the pointer by n leaves File_cnt(fp) unchanged. 1915 */ 1916 /*#define USE_STDIO_PTR /**/ 1917 #ifdef USE_STDIO_PTR 1918 #define FILE_ptr(fp) ((fp)->_ptr) 1919 /*#define STDIO_PTR_LVALUE /**/ 1920 #define FILE_cnt(fp) ((fp)->_cnt) 1921 /*#define STDIO_CNT_LVALUE /**/ 1922 /*#define STDIO_PTR_LVAL_SETS_CNT /**/ 1923 /*#define STDIO_PTR_LVAL_NOCHANGE_CNT /**/ 1924 #endif 1925 1926 /* USE_STDIO_BASE: 1927 * This symbol is defined if the _base field (or similar) of the 1928 * stdio FILE structure can be used to access the stdio buffer for 1929 * a file handle. If this is defined, then the FILE_base(fp) macro 1930 * will also be defined and should be used to access this field. 1931 * Also, the FILE_bufsiz(fp) macro will be defined and should be used 1932 * to determine the number of bytes in the buffer. USE_STDIO_BASE 1933 * will never be defined unless USE_STDIO_PTR is. 1934 */ 1935 /* FILE_base: 1936 * This macro is used to access the _base field (or equivalent) of the 1937 * FILE structure pointed to by its argument. This macro will always be 1938 * defined if USE_STDIO_BASE is defined. 1939 */ 1940 /* FILE_bufsiz: 1941 * This macro is used to determine the number of bytes in the I/O 1942 * buffer pointed to by _base field (or equivalent) of the FILE 1943 * structure pointed to its argument. This macro will always be defined 1944 * if USE_STDIO_BASE is defined. 1945 */ 1946 /*#define USE_STDIO_BASE /**/ 1947 #ifdef USE_STDIO_BASE 1948 #define FILE_base(fp) ((fp)->_base) 1949 #define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base) 1950 #endif 1951 1952 /* HAS_SYS_ERRLIST: 1953 * This symbol, if defined, indicates that the sys_errlist array is 1954 * available to translate error numbers to strings. The extern int 1955 * sys_nerr gives the size of that table. 1956 */ 1957 #define HAS_SYS_ERRLIST /**/ 1958 1959 /* HAS_STRTOLD: 1960 * This symbol, if defined, indicates that the strtold routine is 1961 * available to convert strings to long doubles. 1962 */ 1963 /*#define HAS_STRTOLD /**/ 1964 1965 /* HAS_STRTOLL: 1966 * This symbol, if defined, indicates that the strtoll routine is 1967 * available to convert strings to long longs. 1968 */ 1969 /*#define HAS_STRTOLL /**/ 1970 1971 /* HAS_STRTOQ: 1972 * This symbol, if defined, indicates that the strtoq routine is 1973 * available to convert strings to long longs (quads). 1974 */ 1975 /*#define HAS_STRTOQ /**/ 1976 1977 /* HAS_STRTOUL: 1978 * This symbol, if defined, indicates that the strtoul routine is 1979 * available to provide conversion of strings to unsigned long. 1980 */ 1981 #define HAS_STRTOUL /**/ 1982 1983 /* HAS_STRTOULL: 1984 * This symbol, if defined, indicates that the strtoull routine is 1985 * available to convert strings to unsigned long longs. 1986 */ 1987 /*#define HAS_STRTOULL /**/ 1988 1989 /* HAS_STRTOUQ: 1990 * This symbol, if defined, indicates that the strtouq routine is 1991 * available to convert strings to unsigned long longs (quads). 1992 */ 1993 /*#define HAS_STRTOUQ /**/ 1994 1995 /* HAS_TELLDIR_PROTO: 1996 * This symbol, if defined, indicates that the system provides 1997 * a prototype for the telldir() function. Otherwise, it is up 1998 * to the program to supply one. A good guess is 1999 * extern long telldir(DIR*); 2000 */ 2001 #define HAS_TELLDIR_PROTO /**/ 2002 2003 /* Time_t: 2004 * This symbol holds the type returned by time(). It can be long, 2005 * or time_t on BSD sites (in which case <sys/types.h> should be 2006 * included). 2007 */ 2008 #define Time_t time_t /* Time type */ 2009 2010 /* HAS_TIMES: 2011 * This symbol, if defined, indicates that the times() routine exists. 2012 * Note that this became obsolete on some systems (SUNOS), which now 2013 * use getrusage(). It may be necessary to include <sys/times.h>. 2014 */ 2015 /*#define HAS_TIMES /**/ 2016 2017 /* HAS_UALARM: 2018 * This symbol, if defined, indicates that the ualarm routine is 2019 * available to do alarms with microsecond granularity. 2020 */ 2021 /*#define HAS_UALARM /**/ 2022 2023 /* HAS_UNION_SEMUN: 2024 * This symbol, if defined, indicates that the union semun is 2025 * defined by including <sys/sem.h>. If not, the user code 2026 * probably needs to define it as: 2027 * union semun { 2028 * int val; 2029 * struct semid_ds *buf; 2030 * unsigned short *array; 2031 * } 2032 */ 2033 /* USE_SEMCTL_SEMUN: 2034 * This symbol, if defined, indicates that union semun is 2035 * used for semctl IPC_STAT. 2036 */ 2037 /* USE_SEMCTL_SEMID_DS: 2038 * This symbol, if defined, indicates that struct semid_ds * is 2039 * used for semctl IPC_STAT. 2040 */ 2041 #define HAS_UNION_SEMUN /**/ 2042 /*#define USE_SEMCTL_SEMUN /**/ 2043 /*#define USE_SEMCTL_SEMID_DS /**/ 2044 2045 /* HAS_USTAT: 2046 * This symbol, if defined, indicates that the ustat system call is 2047 * available to query file system statistics by dev_t. 2048 */ 2049 /*#define HAS_USTAT /**/ 2050 2051 /* HAS_VFORK: 2052 * This symbol, if defined, indicates that vfork() exists. 2053 */ 2054 /*#define HAS_VFORK /**/ 2055 2056 /* Signal_t: 2057 * This symbol's value is either "void" or "int", corresponding to the 2058 * appropriate return type of a signal handler. Thus, you can declare 2059 * a signal handler using "Signal_t (*handler)()", and define the 2060 * handler using "Signal_t handler(sig)". 2061 */ 2062 #define Signal_t void /* Signal handler's return type */ 2063 2064 /* HAS_WRITEV: 2065 * This symbol, if defined, indicates that the writev routine is 2066 * available to do scatter writes. 2067 */ 2068 /*#define HAS_WRITEV /**/ 2069 2070 /* USE_DYNAMIC_LOADING: 2071 * This symbol, if defined, indicates that dynamic loading of 2072 * some sort is available. 2073 */ 2074 #define USE_DYNAMIC_LOADING /**/ 2075 2076 /* DOUBLESIZE: 2077 * This symbol contains the size of a double, so that the C preprocessor 2078 * can make decisions based on it. 2079 */ 2080 #define DOUBLESIZE 8 /**/ 2081 2082 /* DOUBLE_STYLE_IEEE 2083 * This symbol, if defined, indicates that the double is 2084 * the 64-bit IEEE 754. 2085 */ 2086 /* DOUBLE_HAS_INF 2087 * This symbol, if defined, indicates that the double has 2088 * the infinity. 2089 */ 2090 /* DOUBLE_HAS_NAN 2091 * This symbol, if defined, indicates that the double has 2092 * the not-a-number. 2093 */ 2094 /* DOUBLE_HAS_NEGATIVE_ZERO 2095 * This symbol, if defined, indicates that the double has 2096 * the negative_zero. 2097 */ 2098 /* DOUBLE_HAS_SUBNORMALS 2099 * This symbol, if defined, indicates that the double has 2100 * the subnormals (denormals). 2101 */ 2102 #define DOUBLE_STYLE_IEEE 2103 #define DOUBLE_HAS_INF 2104 #define DOUBLE_HAS_INF 2105 #define DOUBLE_HAS_NEGATIVE_ZERO 2106 #define DOUBLE_HAS_SUBNORMALS 2107 2108 /* DOUBLEINFBYTES: 2109 * This symbol, if defined, is a comma-separated list of 2110 * hexadecimal bytes for the double precision infinity. 2111 */ 2112 /* DOUBLENANBYTES: 2113 * This symbol, if defined, is a comma-separated list of 2114 * hexadecimal bytes (0xHH) for the double precision not-a-number. 2115 */ 2116 /* LONGDBLINFBYTES: 2117 * This symbol, if defined, is a comma-separated list of 2118 * hexadecimal bytes for the long double precision infinity. 2119 */ 2120 /* LONGDBLNANBYTES: 2121 * This symbol, if defined, is a comma-separated list of 2122 * hexadecimal bytes (0xHH) for the long double precision not-a-number. 2123 */ 2124 #define DOUBLEINFBYTES 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x7f /**/ 2125 #define DOUBLENANBYTES 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x7f /**/ 2126 #define LONGDBLINFBYTES 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x7f /**/ 2127 #define LONGDBLNANBYTES 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0x7f /**/ 2128 2129 /* DOUBLEMANTBITS: 2130 * This symbol, if defined, tells how many mantissa bits 2131 * there are in double precision floating point format. 2132 * Note that this is usually DBL_MANT_DIG minus one, since 2133 * with the standard IEEE 754 formats DBL_MANT_DIG includes 2134 * the implicit bit, which doesn't really exist. 2135 */ 2136 #define DOUBLEMANTBITS 52 2137 2138 /* LONGDBLMANTBITS: 2139 * This symbol, if defined, tells how many mantissa bits 2140 * there are in long double precision floating point format. 2141 * Note that this can be LDBL_MANT_DIG minus one, 2142 * since LDBL_MANT_DIG can include the IEEE 754 implicit bit. 2143 * The common x86-style 80-bit long double does not have 2144 * an implicit bit. 2145 */ 2146 #define LONGDBLMANTBITS 52 2147 2148 /* LONG_DOUBLE_STYLE_IEEE 2149 * This symbol, if defined, indicates that the long double 2150 * is any of the IEEE 754 style long doubles: 2151 * LONG_DOUBLE_STYLE_IEEE_STD, LONG_DOUBLE_STYLE_IEEE_EXTENDED, 2152 * LONG_DOUBLE_STYLE_IEEE_DOUBLEDOUBLE. 2153 */ 2154 /* LONG_DOUBLE_STYLE_IEEE_EXTENDED 2155 * This symbol, if defined, indicates that the long double is 2156 * the 80-bit IEEE 754. Note that despite the 'extended' this 2157 * is less than the 'std', since this is an extension of 2158 * the double precision. 2159 */ 2160 #define LONG_DOUBLE_STYLE_IEEE 2161 #define LONG_DOUBLE_STYLE_IEEE_EXTENDED 2162 2163 /* EBCDIC: 2164 * This symbol, if defined, indicates that this system uses 2165 * EBCDIC encoding. 2166 */ 2167 /*#define EBCDIC /**/ 2168 2169 /* FFLUSH_NULL: 2170 * This symbol, if defined, tells that fflush(NULL) does flush 2171 * all pending stdio output. 2172 */ 2173 /* FFLUSH_ALL: 2174 * This symbol, if defined, tells that to flush 2175 * all pending stdio output one must loop through all 2176 * the stdio file handles stored in an array and fflush them. 2177 * Note that if fflushNULL is defined, fflushall will not 2178 * even be probed for and will be left undefined. 2179 */ 2180 #define FFLUSH_NULL /**/ 2181 /*#define FFLUSH_ALL /**/ 2182 2183 /* Fpos_t: 2184 * This symbol holds the type used to declare file positions in libc. 2185 * It can be fpos_t, long, uint, etc... It may be necessary to include 2186 * <sys/types.h> to get any typedef'ed information. 2187 */ 2188 #define Fpos_t fpos_t /* File position type */ 2189 2190 /* Gid_t_f: 2191 * This symbol defines the format string used for printing a Gid_t. 2192 */ 2193 #define Gid_t_f "ld" /**/ 2194 2195 /* Gid_t_sign: 2196 * This symbol holds the signedess of a Gid_t. 2197 * 1 for unsigned, -1 for signed. 2198 */ 2199 #define Gid_t_sign -1 /* GID sign */ 2200 2201 /* Gid_t_size: 2202 * This symbol holds the size of a Gid_t in bytes. 2203 */ 2204 #define Gid_t_size 4 /* GID size */ 2205 2206 /* Gid_t: 2207 * This symbol holds the return type of getgid() and the type of 2208 * argument to setrgid() and related functions. Typically, 2209 * it is the type of group ids in the kernel. It can be int, ushort, 2210 * gid_t, etc... It may be necessary to include <sys/types.h> to get 2211 * any typedef'ed information. 2212 */ 2213 #define Gid_t gid_t /* Type for getgid(), etc... */ 2214 2215 /* Groups_t: 2216 * This symbol holds the type used for the second argument to 2217 * getgroups() and setgroups(). Usually, this is the same as 2218 * gidtype (gid_t) , but sometimes it isn't. 2219 * It can be int, ushort, gid_t, etc... 2220 * It may be necessary to include <sys/types.h> to get any 2221 * typedef'ed information. This is only required if you have 2222 * getgroups() or setgroups().. 2223 */ 2224 #if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS) 2225 #define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */ 2226 #endif 2227 2228 /* DB_Prefix_t: 2229 * This symbol contains the type of the prefix structure element 2230 * in the <db.h> header file. In older versions of DB, it was 2231 * int, while in newer ones it is u_int32_t. 2232 */ 2233 /* DB_Hash_t: 2234 * This symbol contains the type of the prefix structure element 2235 * in the <db.h> header file. In older versions of DB, it was 2236 * int, while in newer ones it is size_t. 2237 */ 2238 /* DB_VERSION_MAJOR_CFG: 2239 * This symbol, if defined, defines the major version number of 2240 * Berkeley DB found in the <db.h> header when Perl was configured. 2241 */ 2242 /* DB_VERSION_MINOR_CFG: 2243 * This symbol, if defined, defines the minor version number of 2244 * Berkeley DB found in the <db.h> header when Perl was configured. 2245 * For DB version 1 this is always 0. 2246 */ 2247 /* DB_VERSION_PATCH_CFG: 2248 * This symbol, if defined, defines the patch version number of 2249 * Berkeley DB found in the <db.h> header when Perl was configured. 2250 * For DB version 1 this is always 0. 2251 */ 2252 #define DB_Hash_t int /**/ 2253 #define DB_Prefix_t int /**/ 2254 #define DB_VERSION_MAJOR_CFG undef /**/ 2255 #define DB_VERSION_MINOR_CFG undef /**/ 2256 #define DB_VERSION_PATCH_CFG undef /**/ 2257 2258 /* I_GRP: 2259 * This symbol, if defined, indicates to the C program that it should 2260 * include <grp.h>. 2261 */ 2262 /* GRPASSWD: 2263 * This symbol, if defined, indicates to the C program that struct group 2264 * in <grp.h> contains gr_passwd. 2265 */ 2266 /*#define I_GRP /**/ 2267 /*#define GRPASSWD /**/ 2268 2269 /* I_IEEEFP: 2270 * This symbol, if defined, indicates that <ieeefp.h> exists and 2271 * should be included. 2272 */ 2273 /*#define I_IEEEFP /**/ 2274 2275 /* I_INTTYPES: 2276 * This symbol, if defined, indicates to the C program that it should 2277 * include <inttypes.h>. 2278 */ 2279 /*#define I_INTTYPES /**/ 2280 2281 /* I_LIBUTIL: 2282 * This symbol, if defined, indicates that <libutil.h> exists and 2283 * should be included. 2284 */ 2285 /*#define I_LIBUTIL /**/ 2286 2287 /* I_MACH_CTHREADS: 2288 * This symbol, if defined, indicates to the C program that it should 2289 * include <mach/cthreads.h>. 2290 */ 2291 /*#define I_MACH_CTHREADS /**/ 2292 2293 /* I_MNTENT: 2294 * This symbol, if defined, indicates that <mntent.h> exists and 2295 * should be included. 2296 */ 2297 /*#define I_MNTENT /**/ 2298 2299 /* I_NETDB: 2300 * This symbol, if defined, indicates that <netdb.h> exists and 2301 * should be included. 2302 */ 2303 #define I_NETDB /**/ 2304 2305 /* I_NETINET_TCP: 2306 * This symbol, if defined, indicates to the C program that it should 2307 * include <netinet/tcp.h>. 2308 */ 2309 /*#define I_NETINET_TCP /**/ 2310 2311 /* I_POLL: 2312 * This symbol, if defined, indicates that <poll.h> exists and 2313 * should be included. 2314 */ 2315 /*#define I_POLL /**/ 2316 2317 /* I_PROT: 2318 * This symbol, if defined, indicates that <prot.h> exists and 2319 * should be included. 2320 */ 2321 /*#define I_PROT /**/ 2322 2323 /* I_PTHREAD: 2324 * This symbol, if defined, indicates to the C program that it should 2325 * include <pthread.h>. 2326 */ 2327 /*#define I_PTHREAD /**/ 2328 2329 /* I_PWD: 2330 * This symbol, if defined, indicates to the C program that it should 2331 * include <pwd.h>. 2332 */ 2333 /* PWQUOTA: 2334 * This symbol, if defined, indicates to the C program that struct passwd 2335 * contains pw_quota. 2336 */ 2337 /* PWAGE: 2338 * This symbol, if defined, indicates to the C program that struct passwd 2339 * contains pw_age. 2340 */ 2341 /* PWCHANGE: 2342 * This symbol, if defined, indicates to the C program that struct passwd 2343 * contains pw_change. 2344 */ 2345 /* PWCLASS: 2346 * This symbol, if defined, indicates to the C program that struct passwd 2347 * contains pw_class. 2348 */ 2349 /* PWEXPIRE: 2350 * This symbol, if defined, indicates to the C program that struct passwd 2351 * contains pw_expire. 2352 */ 2353 /* PWCOMMENT: 2354 * This symbol, if defined, indicates to the C program that struct passwd 2355 * contains pw_comment. 2356 */ 2357 /* PWGECOS: 2358 * This symbol, if defined, indicates to the C program that struct passwd 2359 * contains pw_gecos. 2360 */ 2361 /* PWPASSWD: 2362 * This symbol, if defined, indicates to the C program that struct passwd 2363 * contains pw_passwd. 2364 */ 2365 /*#define I_PWD /**/ 2366 /*#define PWQUOTA /**/ 2367 /*#define PWAGE /**/ 2368 /*#define PWCHANGE /**/ 2369 /*#define PWCLASS /**/ 2370 /*#define PWEXPIRE /**/ 2371 /*#define PWCOMMENT /**/ 2372 /*#define PWGECOS /**/ 2373 /*#define PWPASSWD /**/ 2374 2375 /* I_SHADOW: 2376 * This symbol, if defined, indicates that <shadow.h> exists and 2377 * should be included. 2378 */ 2379 /*#define I_SHADOW /**/ 2380 2381 /* I_SOCKS: 2382 * This symbol, if defined, indicates that <socks.h> exists and 2383 * should be included. 2384 */ 2385 /*#define I_SOCKS /**/ 2386 2387 /* I_SUNMATH: 2388 * This symbol, if defined, indicates that <sunmath.h> exists and 2389 * should be included. 2390 */ 2391 /*#define I_SUNMATH /**/ 2392 2393 /* I_SYSLOG: 2394 * This symbol, if defined, indicates that <syslog.h> exists and 2395 * should be included. 2396 */ 2397 /*#define I_SYSLOG /**/ 2398 2399 /* I_SYSMODE: 2400 * This symbol, if defined, indicates that <sys/mode.h> exists and 2401 * should be included. 2402 */ 2403 /*#define I_SYSMODE /**/ 2404 2405 /* I_SYS_MOUNT: 2406 * This symbol, if defined, indicates that <sys/mount.h> exists and 2407 * should be included. 2408 */ 2409 /*#define I_SYS_MOUNT /**/ 2410 2411 /* I_SYS_STATFS: 2412 * This symbol, if defined, indicates that <sys/statfs.h> exists. 2413 */ 2414 /*#define I_SYS_STATFS /**/ 2415 2416 /* I_SYS_STATVFS: 2417 * This symbol, if defined, indicates that <sys/statvfs.h> exists and 2418 * should be included. 2419 */ 2420 /*#define I_SYS_STATVFS /**/ 2421 2422 /* I_SYSUIO: 2423 * This symbol, if defined, indicates that <sys/uio.h> exists and 2424 * should be included. 2425 */ 2426 /*#define I_SYSUIO /**/ 2427 2428 /* I_SYSUTSNAME: 2429 * This symbol, if defined, indicates that <sys/utsname.h> exists and 2430 * should be included. 2431 */ 2432 #define I_SYSUTSNAME /**/ 2433 2434 /* I_SYS_VFS: 2435 * This symbol, if defined, indicates that <sys/vfs.h> exists and 2436 * should be included. 2437 */ 2438 /*#define I_SYS_VFS /**/ 2439 2440 /* I_TIME: 2441 * This symbol, if defined, indicates to the C program that it should 2442 * include <time.h>. 2443 */ 2444 /* I_SYS_TIME: 2445 * This symbol, if defined, indicates to the C program that it should 2446 * include <sys/time.h>. 2447 */ 2448 /* I_SYS_TIME_KERNEL: 2449 * This symbol, if defined, indicates to the C program that it should 2450 * include <sys/time.h> with KERNEL defined. 2451 */ 2452 #define I_TIME /**/ 2453 /*#define I_SYS_TIME /**/ 2454 /*#define I_SYS_TIME_KERNEL /**/ 2455 2456 /* I_USTAT: 2457 * This symbol, if defined, indicates that <ustat.h> exists and 2458 * should be included. 2459 */ 2460 /*#define I_USTAT /**/ 2461 2462 /* PERL_INC_VERSION_LIST: 2463 * This variable specifies the list of subdirectories in over 2464 * which perl.c:incpush() and lib/lib.pm will automatically 2465 * search when adding directories to @INC, in a format suitable 2466 * for a C initialization string. See the inc_version_list entry 2467 * in Porting/Glossary for more details. 2468 */ 2469 #define PERL_INC_VERSION_LIST 0 /**/ 2470 2471 /* INSTALL_USR_BIN_PERL: 2472 * This symbol, if defined, indicates that Perl is to be installed 2473 * also as /usr/bin/perl. 2474 */ 2475 /*#define INSTALL_USR_BIN_PERL /**/ 2476 2477 /* PERL_PRIfldbl: 2478 * This symbol, if defined, contains the string used by stdio to 2479 * format long doubles (format 'f') for output. 2480 */ 2481 /* PERL_PRIgldbl: 2482 * This symbol, if defined, contains the string used by stdio to 2483 * format long doubles (format 'g') for output. 2484 */ 2485 /* PERL_PRIeldbl: 2486 * This symbol, if defined, contains the string used by stdio to 2487 * format long doubles (format 'e') for output. 2488 */ 2489 /* PERL_SCNfldbl: 2490 * This symbol, if defined, contains the string used by stdio to 2491 * format long doubles (format 'f') for input. 2492 */ 2493 /*#define PERL_PRIfldbl "f" /**/ 2494 /*#define PERL_PRIgldbl "g" /**/ 2495 /*#define PERL_PRIeldbl "e" /**/ 2496 /*#define PERL_SCNfldbl undef /**/ 2497 2498 #$d_PRIfldbl PERL_PRIfldbl $sPRIfldbl /**/ 2499 #$d_PRIgldbl PERL_PRIgldbl $sPRIgldbl /**/ 2500 #$d_PRIeldbl PERL_PRIeldbl $sPRIeldbl /**/ 2501 2502 /*#$d_SCNfldbl PERL_SCNfldbl $sSCNfldbl /**/ 2503 2504 /* Off_t: 2505 * This symbol holds the type used to declare offsets in the kernel. 2506 * It can be int, long, off_t, etc... It may be necessary to include 2507 * <sys/types.h> to get any typedef'ed information. 2508 */ 2509 /* LSEEKSIZE: 2510 * This symbol holds the number of bytes used by the Off_t. 2511 */ 2512 /* Off_t_size: 2513 * This symbol holds the number of bytes used by the Off_t. 2514 */ 2515 #define Off_t off_t /* <offset> type */ 2516 #define LSEEKSIZE 4 /* <offset> size */ 2517 #define Off_t_size 4 /* <offset> size */ 2518 2519 /* Free_t: 2520 * This variable contains the return type of free(). It is usually 2521 * void, but occasionally int. 2522 */ 2523 /* Malloc_t: 2524 * This symbol is the type of pointer returned by malloc and realloc. 2525 */ 2526 #define Malloc_t void * /**/ 2527 #define Free_t void /**/ 2528 2529 /* MYMALLOC: 2530 * This symbol, if defined, indicates that we're using our own malloc. 2531 */ 2532 /*#define MYMALLOC /**/ 2533 2534 /* Mode_t: 2535 * This symbol holds the type used to declare file modes 2536 * for systems calls. It is usually mode_t, but may be 2537 * int or unsigned short. It may be necessary to include <sys/types.h> 2538 * to get any typedef'ed information. 2539 */ 2540 #define Mode_t mode_t /* file mode parameter for system calls */ 2541 2542 /* VAL_O_NONBLOCK: 2543 * This symbol is to be used during open() or fcntl(F_SETFL) to turn on 2544 * non-blocking I/O for the file descriptor. Note that there is no way 2545 * back, i.e. you cannot turn it blocking again this way. If you wish to 2546 * alternatively switch between blocking and non-blocking, use the 2547 * ioctl(FIOSNBIO) call instead, but that is not supported by all devices. 2548 */ 2549 /* VAL_EAGAIN: 2550 * This symbol holds the errno error code set by read() when no data was 2551 * present on the non-blocking file descriptor. 2552 */ 2553 /* RD_NODATA: 2554 * This symbol holds the return code from read() when no data is present 2555 * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is 2556 * not defined, then you can't distinguish between no data and EOF by 2557 * issuing a read(). You'll have to find another way to tell for sure! 2558 */ 2559 /* EOF_NONBLOCK: 2560 * This symbol, if defined, indicates to the C program that a read() on 2561 * a non-blocking file descriptor will return 0 on EOF, and not the value 2562 * held in RD_NODATA (-1 usually, in that case!). 2563 */ 2564 #define VAL_O_NONBLOCK O_NONBLOCK 2565 #define VAL_EAGAIN EAGAIN 2566 #define RD_NODATA -1 2567 #define EOF_NONBLOCK 2568 2569 /* NEED_VA_COPY: 2570 * This symbol, if defined, indicates that the system stores 2571 * the variable argument list datatype, va_list, in a format 2572 * that cannot be copied by simple assignment, so that some 2573 * other means must be used when copying is required. 2574 * As such systems vary in their provision (or non-provision) 2575 * of copying mechanisms, handy.h defines a platform- 2576 * independent macro, Perl_va_copy(src, dst), to do the job. 2577 */ 2578 /*#define NEED_VA_COPY /**/ 2579 2580 /* Netdb_host_t: 2581 * This symbol holds the type used for the 1st argument 2582 * to gethostbyaddr(). 2583 */ 2584 /* Netdb_hlen_t: 2585 * This symbol holds the type used for the 2nd argument 2586 * to gethostbyaddr(). 2587 */ 2588 /* Netdb_name_t: 2589 * This symbol holds the type used for the argument to 2590 * gethostbyname(). 2591 */ 2592 /* Netdb_net_t: 2593 * This symbol holds the type used for the 1st argument to 2594 * getnetbyaddr(). 2595 */ 2596 #define Netdb_host_t char * /**/ 2597 #define Netdb_hlen_t int /**/ 2598 #define Netdb_name_t char * /**/ 2599 #define Netdb_net_t long /**/ 2600 2601 /* PERL_OTHERLIBDIRS: 2602 * This variable contains a colon-separated set of paths for the perl 2603 * binary to search for additional library files or modules. 2604 * These directories will be tacked to the end of @INC. 2605 * Perl will automatically search below each path for version- 2606 * and architecture-specific directories. See PERL_INC_VERSION_LIST 2607 * for more details. 2608 */ 2609 /*#define PERL_OTHERLIBDIRS "undef" /**/ 2610 2611 /* IVTYPE: 2612 * This symbol defines the C type used for Perl's IV. 2613 */ 2614 /* UVTYPE: 2615 * This symbol defines the C type used for Perl's UV. 2616 */ 2617 /* I8TYPE: 2618 * This symbol defines the C type used for Perl's I8. 2619 */ 2620 /* U8TYPE: 2621 * This symbol defines the C type used for Perl's U8. 2622 */ 2623 /* I16TYPE: 2624 * This symbol defines the C type used for Perl's I16. 2625 */ 2626 /* U16TYPE: 2627 * This symbol defines the C type used for Perl's U16. 2628 */ 2629 /* I32TYPE: 2630 * This symbol defines the C type used for Perl's I32. 2631 */ 2632 /* U32TYPE: 2633 * This symbol defines the C type used for Perl's U32. 2634 */ 2635 /* I64TYPE: 2636 * This symbol defines the C type used for Perl's I64. 2637 */ 2638 /* U64TYPE: 2639 * This symbol defines the C type used for Perl's U64. 2640 */ 2641 /* NVTYPE: 2642 * This symbol defines the C type used for Perl's NV. 2643 */ 2644 /* IVSIZE: 2645 * This symbol contains the sizeof(IV). 2646 */ 2647 /* UVSIZE: 2648 * This symbol contains the sizeof(UV). 2649 */ 2650 /* I8SIZE: 2651 * This symbol contains the sizeof(I8). 2652 */ 2653 /* U8SIZE: 2654 * This symbol contains the sizeof(U8). 2655 */ 2656 /* I16SIZE: 2657 * This symbol contains the sizeof(I16). 2658 */ 2659 /* U16SIZE: 2660 * This symbol contains the sizeof(U16). 2661 */ 2662 /* I32SIZE: 2663 * This symbol contains the sizeof(I32). 2664 */ 2665 /* U32SIZE: 2666 * This symbol contains the sizeof(U32). 2667 */ 2668 /* I64SIZE: 2669 * This symbol contains the sizeof(I64). 2670 */ 2671 /* U64SIZE: 2672 * This symbol contains the sizeof(U64). 2673 */ 2674 /* NVSIZE: 2675 * This symbol contains the sizeof(NV). 2676 */ 2677 /* NV_PRESERVES_UV: 2678 * This symbol, if defined, indicates that a variable of type NVTYPE 2679 * can preserve all the bits of a variable of type UVTYPE. 2680 */ 2681 /* NV_PRESERVES_UV_BITS: 2682 * This symbol contains the number of bits a variable of type NVTYPE 2683 * can preserve of a variable of type UVTYPE. 2684 */ 2685 /* NV_ZERO_IS_ALLBITS_ZERO: 2686 * This symbol, if defined, indicates that a variable of type NVTYPE 2687 * stores 0.0 in memory as all bits zero. 2688 */ 2689 #define IVTYPE long /**/ 2690 #define UVTYPE unsigned long /**/ 2691 #define I8TYPE char /**/ 2692 #define U8TYPE unsigned char /**/ 2693 #define I16TYPE short /**/ 2694 #define U16TYPE unsigned short /**/ 2695 #define I32TYPE long /**/ 2696 #define U32TYPE unsigned long /**/ 2697 #ifdef HAS_QUAD 2698 #define I64TYPE __int64 /**/ 2699 #define U64TYPE unsigned __int64 /**/ 2700 #endif 2701 #define NVTYPE double /**/ 2702 #define IVSIZE 4 /**/ 2703 #define UVSIZE 4 /**/ 2704 #define I8SIZE 1 /**/ 2705 #define U8SIZE 1 /**/ 2706 #define I16SIZE 2 /**/ 2707 #define U16SIZE 2 /**/ 2708 #define I32SIZE 4 /**/ 2709 #define U32SIZE 4 /**/ 2710 #ifdef HAS_QUAD 2711 #define I64SIZE 8 /**/ 2712 #define U64SIZE 8 /**/ 2713 #endif 2714 #define NVSIZE 8 /**/ 2715 #define NV_PRESERVES_UV 2716 #define NV_PRESERVES_UV_BITS undef 2717 #undef NV_ZERO_IS_ALLBITS_ZERO 2718 2719 /* IVdf: 2720 * This symbol defines the format string used for printing a Perl IV 2721 * as a signed decimal integer. 2722 */ 2723 /* UVuf: 2724 * This symbol defines the format string used for printing a Perl UV 2725 * as an unsigned decimal integer. 2726 */ 2727 /* UVof: 2728 * This symbol defines the format string used for printing a Perl UV 2729 * as an unsigned octal integer. 2730 */ 2731 /* UVxf: 2732 * This symbol defines the format string used for printing a Perl UV 2733 * as an unsigned hexadecimal integer in lowercase abcdef. 2734 */ 2735 /* UVXf: 2736 * This symbol defines the format string used for printing a Perl UV 2737 * as an unsigned hexadecimal integer in uppercase ABCDEF. 2738 */ 2739 /* NVef: 2740 * This symbol defines the format string used for printing a Perl NV 2741 * using %e-ish floating point format. 2742 */ 2743 /* NVff: 2744 * This symbol defines the format string used for printing a Perl NV 2745 * using %f-ish floating point format. 2746 */ 2747 /* NVgf: 2748 * This symbol defines the format string used for printing a Perl NV 2749 * using %g-ish floating point format. 2750 */ 2751 #define IVdf "ld" /**/ 2752 #define UVuf "lu" /**/ 2753 #define UVof "lo" /**/ 2754 #define UVxf "lx" /**/ 2755 #define UVXf "lX" /**/ 2756 #define NVef "e" /**/ 2757 #define NVff "f" /**/ 2758 #define NVgf "g" /**/ 2759 2760 /* Pid_t: 2761 * This symbol holds the type used to declare process ids in the kernel. 2762 * It can be int, uint, pid_t, etc... It may be necessary to include 2763 * <sys/types.h> to get any typedef'ed information. 2764 */ 2765 #define Pid_t int /* PID type */ 2766 2767 /* PRIVLIB: 2768 * This symbol contains the name of the private library for this package. 2769 * The library is private in the sense that it needn't be in anyone's 2770 * execution path, but it should be accessible by the world. The program 2771 * should be prepared to do ~ expansion. 2772 */ 2773 /* PRIVLIB_EXP: 2774 * This symbol contains the ~name expanded version of PRIVLIB, to be used 2775 * in programs that are not prepared to deal with ~ expansion at run-time. 2776 */ 2777 #define PRIVLIB "sys:\\perl\\lib" /**/ 2778 #define PRIVLIB_EXP (fnNwGetEnvironmentStr("PRIVLIB", PRIVLIB)) /**/ 2779 2780 /* PTRSIZE: 2781 * This symbol contains the size of a pointer, so that the C preprocessor 2782 * can make decisions based on it. It will be sizeof(void *) if 2783 * the compiler supports (void *); otherwise it will be 2784 * sizeof(char *). 2785 */ 2786 #define PTRSIZE 4 /**/ 2787 2788 /* Drand01: 2789 * This macro is to be used to generate uniformly distributed 2790 * random numbers over the range [0., 1.[. You may have to supply 2791 * an 'extern double drand48();' in your program since SunOS 4.1.3 2792 * doesn't provide you with anything relevant in its headers. 2793 * See HAS_DRAND48_PROTO. 2794 */ 2795 /* Rand_seed_t: 2796 * This symbol defines the type of the argument of the 2797 * random seed function. 2798 */ 2799 /* seedDrand01: 2800 * This symbol defines the macro to be used in seeding the 2801 * random number generator (see Drand01). 2802 */ 2803 /* RANDBITS: 2804 * This symbol indicates how many bits are produced by the 2805 * function used to generate normalized random numbers. 2806 * Values include 15, 16, 31, and 48. 2807 */ 2808 #define Drand01() (rand()/(double)((unsigned)1<<RANDBITS)) /**/ 2809 #define Rand_seed_t unsigned /**/ 2810 #define seedDrand01(x) srand((Rand_seed_t)x) /**/ 2811 #define RANDBITS 15 /**/ 2812 2813 /* SELECT_MIN_BITS: 2814 * This symbol holds the minimum number of bits operated by select. 2815 * That is, if you do select(n, ...), how many bits at least will be 2816 * cleared in the masks if some activity is detected. Usually this 2817 * is either n or 32*ceil(n/32), especially many little-endians do 2818 * the latter. This is only useful if you have select(), naturally. 2819 */ 2820 #define SELECT_MIN_BITS 32 /**/ 2821 2822 /* Select_fd_set_t: 2823 * This symbol holds the type used for the 2nd, 3rd, and 4th 2824 * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET 2825 * is defined, and 'int *' otherwise. This is only useful if you 2826 * have select(), of course. 2827 */ 2828 #define Select_fd_set_t fd_set * /**/ 2829 2830 /* SIG_NAME: 2831 * This symbol contains a list of signal names in order of 2832 * signal number. This is intended 2833 * to be used as a static array initialization, like this: 2834 * char *sig_name[] = { SIG_NAME }; 2835 * The signals in the list are separated with commas, and each signal 2836 * is surrounded by double quotes. There is no leading SIG in the signal 2837 * name, i.e. SIGQUIT is known as "QUIT". 2838 * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn, 2839 * etc., where nn is the actual signal number (e.g. NUM37). 2840 * The signal number for sig_name[i] is stored in sig_num[i]. 2841 * The last element is 0 to terminate the list with a NULL. This 2842 * corresponds to the 0 at the end of the sig_num list. 2843 */ 2844 /* SIG_NUM: 2845 * This symbol contains a list of signal numbers, in the same order as the 2846 * SIG_NAME list. It is suitable for static array initialization, as in: 2847 * int sig_num[] = { SIG_NUM }; 2848 * The signals in the list are separated with commas, and the indices 2849 * within that list and the SIG_NAME list match, so it's easy to compute 2850 * the signal name from a number or vice versa at the price of a small 2851 * dynamic linear lookup. 2852 * Duplicates are allowed, but are moved to the end of the list. 2853 * The signal number corresponding to sig_name[i] is sig_number[i]. 2854 * if (i < NSIG) then sig_number[i] == i. 2855 * The last element is 0, corresponding to the 0 at the end of 2856 * the sig_name list. 2857 */ 2858 /* SIG_SIZE: 2859 * This variable contains the number of elements of the SIG_NAME 2860 * and SIG_NUM arrays, excluding the final NULL entry. 2861 */ 2862 #define SIG_NAME "ZERO", "NUM01", "INT", "QUIT", "ILL", "NUM05", "NUM06", "NUM07", "FPE", "KILL", "NUM10", "SEGV", "NUM12", "PIPE", "ALRM", "TERM", "NUM16", "NUM17", "NUM18", "NUM19", "CHLD", "BREAK", "ABRT", "STOP", "NUM24", "CONT", "CLD", 0 /**/ 2863 #define SIG_NUM 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 20, 0 /**/ 2864 #define SIG_SIZE 27 /**/ 2865 2866 /* SITEARCH: 2867 * This symbol contains the name of the private library for this package. 2868 * The library is private in the sense that it needn't be in anyone's 2869 * execution path, but it should be accessible by the world. The program 2870 * should be prepared to do ~ expansion. 2871 * The standard distribution will put nothing in this directory. 2872 * After perl has been installed, users may install their own local 2873 * architecture-dependent modules in this directory with 2874 * MakeMaker Makefile.PL 2875 * or equivalent. See INSTALL for details. 2876 */ 2877 /* SITEARCH_EXP: 2878 * This symbol contains the ~name expanded version of SITEARCH, to be used 2879 * in programs that are not prepared to deal with ~ expansion at run-time. 2880 */ 2881 #define SITEARCH "c:\\perl\\site\\5.30.3\\lib\\NetWare-x86-multi-thread" /**/ 2882 /*#define SITEARCH_EXP "" /**/ 2883 2884 /* SITELIB: 2885 * This symbol contains the name of the private library for this package. 2886 * The library is private in the sense that it needn't be in anyone's 2887 * execution path, but it should be accessible by the world. The program 2888 * should be prepared to do ~ expansion. 2889 * The standard distribution will put nothing in this directory. 2890 * After perl has been installed, users may install their own local 2891 * architecture-independent modules in this directory with 2892 * MakeMaker Makefile.PL 2893 * or equivalent. See INSTALL for details. 2894 */ 2895 /* SITELIB_EXP: 2896 * This symbol contains the ~name expanded version of SITELIB, to be used 2897 * in programs that are not prepared to deal with ~ expansion at run-time. 2898 */ 2899 /* SITELIB_STEM: 2900 * This define is SITELIB_EXP with any trailing version-specific component 2901 * removed. The elements in inc_version_list (inc_version_list.U) can 2902 * be tacked onto this variable to generate a list of directories to search. 2903 */ 2904 #define SITELIB "c:\\perl\\site\\5.30.3\\lib" /**/ 2905 /*#define SITELIB_EXP "" /**/ 2906 #define SITELIB_STEM "" /**/ 2907 2908 /* Size_t_size: 2909 * This symbol holds the size of a Size_t in bytes. 2910 */ 2911 #define Size_t_size 4 /**/ 2912 2913 /* Size_t: 2914 * This symbol holds the type used to declare length parameters 2915 * for string functions. It is usually size_t, but may be 2916 * unsigned long, int, etc. It may be necessary to include 2917 * <sys/types.h> to get any typedef'ed information. 2918 */ 2919 #define Size_t size_t /* length parameter for string functions */ 2920 2921 /* Sock_size_t: 2922 * This symbol holds the type used for the size argument of 2923 * various socket calls (just the base type, not the pointer-to). 2924 */ 2925 #define Sock_size_t int /**/ 2926 2927 /* SSize_t: 2928 * This symbol holds the type used by functions that return 2929 * a count of bytes or an error condition. It must be a signed type. 2930 * It is usually ssize_t, but may be long or int, etc. 2931 * It may be necessary to include <sys/types.h> or <unistd.h> 2932 * to get any typedef'ed information. 2933 * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). 2934 */ 2935 #define SSize_t int /* signed count of bytes */ 2936 2937 /* STARTPERL: 2938 * This variable contains the string to put in front of a perl 2939 * script to make sure (one hopes) that it runs with perl and not 2940 * some shell. 2941 */ 2942 #define STARTPERL "#!perl" /**/ 2943 2944 /* STDCHAR: 2945 * This symbol is defined to be the type of char used in stdio.h. 2946 * It has the values "unsigned char" or "char". 2947 */ 2948 #define STDCHAR char /**/ 2949 2950 /* HAS_STDIO_STREAM_ARRAY: 2951 * This symbol, if defined, tells that there is an array 2952 * holding the stdio streams. 2953 */ 2954 /* STDIO_STREAM_ARRAY: 2955 * This symbol tells the name of the array holding the stdio streams. 2956 * Usual values include _iob, __iob, and __sF. 2957 */ 2958 /*#define HAS_STDIO_STREAM_ARRAY /**/ 2959 #define STDIO_STREAM_ARRAY 2960 2961 /* Uid_t_f: 2962 * This symbol defines the format string used for printing a Uid_t. 2963 */ 2964 #define Uid_t_f "ld" /**/ 2965 2966 /* Uid_t_sign: 2967 * This symbol holds the signedess of a Uid_t. 2968 * 1 for unsigned, -1 for signed. 2969 */ 2970 #define Uid_t_sign -1 /* UID sign */ 2971 2972 /* Uid_t_size: 2973 * This symbol holds the size of a Uid_t in bytes. 2974 */ 2975 #define Uid_t_size 4 /* UID size */ 2976 2977 /* Uid_t: 2978 * This symbol holds the type used to declare user ids in the kernel. 2979 * It can be int, ushort, uid_t, etc... It may be necessary to include 2980 * <sys/types.h> to get any typedef'ed information. 2981 */ 2982 #define Uid_t uid_t /* UID type */ 2983 2984 /* USE_64_BIT_INT: 2985 * This symbol, if defined, indicates that 64-bit integers should 2986 * be used when available. If not defined, the native integers 2987 * will be employed (be they 32 or 64 bits). The minimal possible 2988 * 64-bitness is used, just enough to get 64-bit integers into Perl. 2989 * This may mean using for example "long longs", while your memory 2990 * may still be limited to 2 gigabytes. 2991 */ 2992 /* USE_64_BIT_ALL: 2993 * This symbol, if defined, indicates that 64-bit integers should 2994 * be used when available. If not defined, the native integers 2995 * will be used (be they 32 or 64 bits). The maximal possible 2996 * 64-bitness is employed: LP64 or ILP64, meaning that you will 2997 * be able to use more than 2 gigabytes of memory. This mode is 2998 * even more binary incompatible than USE_64_BIT_INT. You may not 2999 * be able to run the resulting executable in a 32-bit CPU at all or 3000 * you may need at least to reboot your OS to 64-bit mode. 3001 */ 3002 #ifndef USE_64_BIT_INT 3003 /*#define USE_64_BIT_INT /**/ 3004 #endif 3005 3006 #ifndef USE_64_BIT_ALL 3007 /*#define USE_64_BIT_ALL /**/ 3008 #endif 3009 3010 /* USE_FAST_STDIO: 3011 * This symbol, if defined, indicates that Perl should 3012 * be built to use 'fast stdio'. 3013 * Defaults to define in Perls 5.8 and earlier, to undef later. 3014 */ 3015 #ifndef USE_FAST_STDIO 3016 /*#define USE_FAST_STDIO / **/ 3017 #endif 3018 3019 /* USE_LARGE_FILES: 3020 * This symbol, if defined, indicates that large file support 3021 * should be used when available. 3022 */ 3023 #ifndef USE_LARGE_FILES 3024 /*#define USE_LARGE_FILES /**/ 3025 #endif 3026 3027 /* USE_LONG_DOUBLE: 3028 * This symbol, if defined, indicates that long doubles should 3029 * be used when available. 3030 */ 3031 #ifndef USE_LONG_DOUBLE 3032 /*#define USE_LONG_DOUBLE /**/ 3033 #endif 3034 3035 /* USE_MORE_BITS: 3036 * This symbol, if defined, indicates that 64-bit interfaces and 3037 * long doubles should be used when available. 3038 */ 3039 #ifndef USE_MORE_BITS 3040 /*#define USE_MORE_BITS /**/ 3041 #endif 3042 3043 /* MULTIPLICITY: 3044 * This symbol, if defined, indicates that Perl should 3045 * be built to use multiplicity. 3046 */ 3047 #ifndef MULTIPLICITY 3048 #define MULTIPLICITY /**/ 3049 #endif 3050 3051 /* USE_PERLIO: 3052 * This symbol, if defined, indicates that the PerlIO abstraction should 3053 * be used throughout. If not defined, stdio should be 3054 * used in a fully backward compatible manner. 3055 */ 3056 #ifndef USE_PERLIO 3057 /*#define USE_PERLIO /**/ 3058 #endif 3059 3060 /* USE_SOCKS: 3061 * This symbol, if defined, indicates that Perl should 3062 * be built to use socks. 3063 */ 3064 #ifndef USE_SOCKS 3065 /*#define USE_SOCKS /**/ 3066 #endif 3067 3068 /* USE_ITHREADS: 3069 * This symbol, if defined, indicates that Perl should be built to 3070 * use the interpreter-based threading implementation. 3071 */ 3072 /* OLD_PTHREADS_API: 3073 * This symbol, if defined, indicates that Perl should 3074 * be built to use the old draft POSIX threads API. 3075 */ 3076 /* USE_REENTRANT_API: 3077 * This symbol, if defined, indicates that Perl should 3078 * try to use the various _r versions of library functions. 3079 * This is extremely experimental. 3080 */ 3081 #define USE_ITHREADS /**/ 3082 /*#define OLD_PTHREADS_API /**/ 3083 /*#define USE_REENTRANT_API /**/ 3084 3085 /* PERL_VENDORARCH: 3086 * If defined, this symbol contains the name of a private library. 3087 * The library is private in the sense that it needn't be in anyone's 3088 * execution path, but it should be accessible by the world. 3089 * It may have a ~ on the front. 3090 * The standard distribution will put nothing in this directory. 3091 * Vendors who distribute perl may wish to place their own 3092 * architecture-dependent modules and extensions in this directory with 3093 * MakeMaker Makefile.PL INSTALLDIRS=vendor 3094 * or equivalent. See INSTALL for details. 3095 */ 3096 /* PERL_VENDORARCH_EXP: 3097 * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used 3098 * in programs that are not prepared to deal with ~ expansion at run-time. 3099 */ 3100 /*#define PERL_VENDORARCH "" /**/ 3101 /*#define PERL_VENDORARCH_EXP "" /**/ 3102 3103 /* PERL_VENDORLIB_EXP: 3104 * This symbol contains the ~name expanded version of VENDORLIB, to be used 3105 * in programs that are not prepared to deal with ~ expansion at run-time. 3106 */ 3107 /* PERL_VENDORLIB_STEM: 3108 * This define is PERL_VENDORLIB_EXP with any trailing version-specific component 3109 * removed. The elements in inc_version_list (inc_version_list.U) can 3110 * be tacked onto this variable to generate a list of directories to search. 3111 */ 3112 /*#define PERL_VENDORLIB_EXP "" /**/ 3113 /*#define PERL_VENDORLIB_STEM "" /**/ 3114 3115 /* SETUID_SCRIPTS_ARE_SECURE_NOW: 3116 * This symbol, if defined, indicates that the bug that prevents 3117 * setuid scripts from being secure is not present in this kernel. 3118 */ 3119 /* DOSUID: 3120 * This symbol, if defined, indicates that the C program should 3121 * check the script that it is executing for setuid/setgid bits, and 3122 * attempt to emulate setuid/setgid on systems that have disabled 3123 * setuid #! scripts because the kernel can't do it securely. 3124 * It is up to the package designer to make sure that this emulation 3125 * is done securely. Among other things, it should do an fstat on 3126 * the script it just opened to make sure it really is a setuid/setgid 3127 * script, it should make sure the arguments passed correspond exactly 3128 * to the argument on the #! line, and it should not trust any 3129 * subprocesses to which it must pass the filename rather than the 3130 * file descriptor of the script to be executed. 3131 */ 3132 /*#define SETUID_SCRIPTS_ARE_SECURE_NOW /**/ 3133 /*#define DOSUID /**/ 3134 3135 /* USE_CROSS_COMPILE: 3136 * This symbol, if defined, indicates that Perl is being cross-compiled. 3137 */ 3138 /* PERL_TARGETARCH: 3139 * This symbol, if defined, indicates the target architecture 3140 * Perl has been cross-compiled to. Undefined if not a cross-compile. 3141 */ 3142 #ifndef USE_CROSS_COMPILE 3143 /*#define USE_CROSS_COMPILE /**/ 3144 #define PERL_TARGETARCH "undef" /**/ 3145 #endif 3146 3147 /* HAS_COPYSIGNL: 3148 * This symbol, if defined, indicates that the copysignl routine is 3149 * available. If aintl is also present we can emulate modfl. 3150 */ 3151 /*#define HAS_COPYSIGNL /**/ 3152 3153 /* HAS_DBMINIT_PROTO: 3154 * This symbol, if defined, indicates that the system provides 3155 * a prototype for the dbminit() function. Otherwise, it is up 3156 * to the program to supply one. A good guess is 3157 * extern int dbminit(char *); 3158 */ 3159 /*#define HAS_DBMINIT_PROTO /**/ 3160 3161 /* HAS_FLOCK_PROTO: 3162 * This symbol, if defined, indicates that the system provides 3163 * a prototype for the flock() function. Otherwise, it is up 3164 * to the program to supply one. A good guess is 3165 * extern int flock(int, int); 3166 */ 3167 /*#define HAS_FLOCK_PROTO /**/ 3168 3169 /* HAS_REALPATH: 3170 * This symbol, if defined, indicates that the realpath routine is 3171 * available to do resolve paths. 3172 */ 3173 /*#define HAS_REALPATH /**/ 3174 3175 /* HAS_SIGPROCMASK: 3176 * This symbol, if defined, indicates that the sigprocmask 3177 * system call is available to examine or change the signal mask 3178 * of the calling process. 3179 */ 3180 /*#define HAS_SIGPROCMASK /**/ 3181 3182 /* HAS_SOCKATMARK: 3183 * This symbol, if defined, indicates that the sockatmark routine is 3184 * available to test whether a socket is at the out-of-band mark. 3185 */ 3186 /*#define HAS_SOCKATMARK /**/ 3187 3188 /* HAS_SOCKATMARK_PROTO: 3189 * This symbol, if defined, indicates that the system provides 3190 * a prototype for the sockatmark() function. Otherwise, it is up 3191 * to the program to supply one. A good guess is 3192 * extern int sockatmark(int); 3193 */ 3194 /*#define HAS_SOCKATMARK_PROTO /**/ 3195 3196 /* HAS_SETRESGID_PROTO: 3197 * This symbol, if defined, indicates that the system provides 3198 * a prototype for the setresgid() function. Otherwise, it is up 3199 * to the program to supply one. Good guesses are 3200 * extern int setresgid(uid_t ruid, uid_t euid, uid_t suid); 3201 */ 3202 /*#define HAS_SETRESGID_PROTO /**/ 3203 3204 /* HAS_SETRESUID_PROTO: 3205 * This symbol, if defined, indicates that the system provides 3206 * a prototype for the setresuid() function. Otherwise, it is up 3207 * to the program to supply one. Good guesses are 3208 * extern int setresuid(uid_t ruid, uid_t euid, uid_t suid); 3209 */ 3210 /*#define HAS_SETRESUID_PROTO /**/ 3211 3212 /* HAS_STRFTIME: 3213 * This symbol, if defined, indicates that the strftime routine is 3214 * available to do time formatting. 3215 */ 3216 #define HAS_STRFTIME /**/ 3217 3218 /* HAS_STRLCAT 3219 * This symbol, if defined, indicates that the strlcat routine is 3220 * available to do string concatenation. 3221 */ 3222 /*#define HAS_STRLCAT /**/ 3223 3224 /* HAS_STRLCPY: 3225 * This symbol, if defined, indicates that the strlcpy routine is 3226 * available to do string copying. 3227 */ 3228 /*#define HAS_STRLCPY /**/ 3229 3230 /* HAS_SYSCALL_PROTO: 3231 * This symbol, if defined, indicates that the system provides 3232 * a prototype for the syscall() function. Otherwise, it is up 3233 * to the program to supply one. Good guesses are 3234 * extern int syscall(int, ...); 3235 * extern int syscall(long, ...); 3236 */ 3237 /*#define HAS_SYSCALL_PROTO /**/ 3238 3239 /* U32_ALIGNMENT_REQUIRED: 3240 * This symbol, if defined, indicates that you must access 3241 * character data through U32-aligned pointers. 3242 */ 3243 /*#define U32_ALIGNMENT_REQUIRED /**/ 3244 3245 /* HAS_USLEEP_PROTO: 3246 * This symbol, if defined, indicates that the system provides 3247 * a prototype for the usleep() function. Otherwise, it is up 3248 * to the program to supply one. A good guess is 3249 * extern int usleep(useconds_t); 3250 */ 3251 /*#define HAS_USLEEP_PROTO /**/ 3252 3253 /* HAS_PTHREAD_ATFORK: 3254 * This symbol, if defined, indicates that the pthread_atfork routine 3255 * is available to setup fork handlers. 3256 */ 3257 /*#define HAS_PTHREAD_ATFORK /**/ 3258 3259 #endif