"Fossies" - the Fresh Open Source Software Archive

Member "fusesmb-0.8.7/missing" (19 Oct 2006, 6480 Bytes) of package /linux/privat/old/fusesmb-0.8.7.tar.gz:


As a special service "Fossies" has tried to format the requested source page into HTML format using (guessed) Bash source code syntax highlighting (style: standard) with prefixed line numbers and code folding option. Alternatively you can here view or download the uninterpreted source code file.

    1 #! /bin/sh
    2 # Common stub for a few missing GNU programs while installing.
    3 # Copyright (C) 1996, 1997, 2001, 2002 Free Software Foundation, Inc.
    4 # Franc,ois Pinard <pinard@iro.umontreal.ca>, 1996.
    5 
    6 # This program is free software; you can redistribute it and/or modify
    7 # it under the terms of the GNU General Public License as published by
    8 # the Free Software Foundation; either version 2, or (at your option)
    9 # any later version.
   10 
   11 # This program is distributed in the hope that it will be useful,
   12 # but WITHOUT ANY WARRANTY; without even the implied warranty of
   13 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   14 # GNU General Public License for more details.
   15 
   16 # You should have received a copy of the GNU General Public License
   17 # along with this program; if not, write to the Free Software
   18 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
   19 # 02111-1307, USA.
   20 
   21 if test $# -eq 0; then
   22   echo 1>&2 "Try \`$0 --help' for more information"
   23   exit 1
   24 fi
   25 
   26 # In the cases where this matters, `missing' is being run in the
   27 # srcdir already.
   28 if test -f configure.in; then
   29   configure_ac=configure.ac
   30 else
   31   configure_ac=configure.in
   32 fi
   33 
   34 case "$1" in
   35 
   36   -h|--h|--he|--hel|--help)
   37     echo "\
   38 $0 [OPTION]... PROGRAM [ARGUMENT]...
   39 
   40 Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
   41 error status if there is no known handling for PROGRAM.
   42 
   43 Options:
   44   -h, --help      display this help and exit
   45   -v, --version   output version information and exit
   46 
   47 Supported PROGRAM values:
   48   aclocal      touch file \`aclocal.m4'
   49   autoconf     touch file \`configure'
   50   autoheader   touch file \`config.h.in'
   51   automake     touch all \`Makefile.in' files
   52   bison        create \`y.tab.[ch]', if possible, from existing .[ch]
   53   flex         create \`lex.yy.c', if possible, from existing .c
   54   lex          create \`lex.yy.c', if possible, from existing .c
   55   makeinfo     touch the output file
   56   yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
   57     ;;
   58 
   59   -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
   60     echo "missing - GNU libit 0.0"
   61     ;;
   62 
   63   -*)
   64     echo 1>&2 "$0: Unknown \`$1' option"
   65     echo 1>&2 "Try \`$0 --help' for more information"
   66     exit 1
   67     ;;
   68 
   69   aclocal*)
   70     echo 1>&2 "\
   71 WARNING: \`$1' is missing on your system.  You should only need it if
   72          you modified \`acinclude.m4' or \`$configure_ac'.  You might want
   73          to install the \`Automake' and \`Perl' packages.  Grab them from
   74          any GNU archive site."
   75     touch aclocal.m4
   76     ;;
   77 
   78   autoconf)
   79     echo 1>&2 "\
   80 WARNING: \`$1' is missing on your system.  You should only need it if
   81          you modified \`$configure_ac'.  You might want to install the
   82          \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
   83          archive site."
   84     touch configure
   85     ;;
   86 
   87   autoheader)
   88     echo 1>&2 "\
   89 WARNING: \`$1' is missing on your system.  You should only need it if
   90          you modified \`acconfig.h' or \`$configure_ac'.  You might want
   91          to install the \`Autoconf' and \`GNU m4' packages.  Grab them
   92          from any GNU archive site."
   93     files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' $configure_ac`
   94     test -z "$files" && files="config.h"
   95     touch_files=
   96     for f in $files; do
   97       case "$f" in
   98       *:*) touch_files="$touch_files "`echo "$f" |
   99                        sed -e 's/^[^:]*://' -e 's/:.*//'`;;
  100       *) touch_files="$touch_files $f.in";;
  101       esac
  102     done
  103     touch $touch_files
  104     ;;
  105 
  106   automake*)
  107     echo 1>&2 "\
  108 WARNING: \`$1' is missing on your system.  You should only need it if
  109          you modified \`Makefile.am', \`acinclude.m4' or \`$configure_ac'.
  110          You might want to install the \`Automake' and \`Perl' packages.
  111          Grab them from any GNU archive site."
  112     find . -type f -name Makefile.am -print |
  113        sed 's/\.am$/.in/' |
  114        while read f; do touch "$f"; done
  115     ;;
  116 
  117   bison|yacc)
  118     echo 1>&2 "\
  119 WARNING: \`$1' is missing on your system.  You should only need it if
  120          you modified a \`.y' file.  You may need the \`Bison' package
  121          in order for those modifications to take effect.  You can get
  122          \`Bison' from any GNU archive site."
  123     rm -f y.tab.c y.tab.h
  124     if [ $# -ne 1 ]; then
  125         eval LASTARG="\${$#}"
  126     case "$LASTARG" in
  127     *.y)
  128         SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
  129         if [ -f "$SRCFILE" ]; then
  130              cp "$SRCFILE" y.tab.c
  131         fi
  132         SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
  133         if [ -f "$SRCFILE" ]; then
  134              cp "$SRCFILE" y.tab.h
  135         fi
  136       ;;
  137     esac
  138     fi
  139     if [ ! -f y.tab.h ]; then
  140     echo >y.tab.h
  141     fi
  142     if [ ! -f y.tab.c ]; then
  143     echo 'main() { return 0; }' >y.tab.c
  144     fi
  145     ;;
  146 
  147   lex|flex)
  148     echo 1>&2 "\
  149 WARNING: \`$1' is missing on your system.  You should only need it if
  150          you modified a \`.l' file.  You may need the \`Flex' package
  151          in order for those modifications to take effect.  You can get
  152          \`Flex' from any GNU archive site."
  153     rm -f lex.yy.c
  154     if [ $# -ne 1 ]; then
  155         eval LASTARG="\${$#}"
  156     case "$LASTARG" in
  157     *.l)
  158         SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
  159         if [ -f "$SRCFILE" ]; then
  160              cp "$SRCFILE" lex.yy.c
  161         fi
  162       ;;
  163     esac
  164     fi
  165     if [ ! -f lex.yy.c ]; then
  166     echo 'main() { return 0; }' >lex.yy.c
  167     fi
  168     ;;
  169 
  170   makeinfo)
  171     echo 1>&2 "\
  172 WARNING: \`$1' is missing on your system.  You should only need it if
  173          you modified a \`.texi' or \`.texinfo' file, or any other file
  174          indirectly affecting the aspect of the manual.  The spurious
  175          call might also be the consequence of using a buggy \`make' (AIX,
  176          DU, IRIX).  You might want to install the \`Texinfo' package or
  177          the \`GNU make' package.  Grab either from any GNU archive site."
  178     file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
  179     if test -z "$file"; then
  180       file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
  181       file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
  182     fi
  183     touch $file
  184     ;;
  185 
  186   *)
  187     echo 1>&2 "\
  188 WARNING: \`$1' is needed, and you do not seem to have it handy on your
  189          system.  You might have modified some files without having the
  190          proper tools for further handling them.  Check the \`README' file,
  191          it often tells you about the needed prerequirements for installing
  192          this package.  You may also peek at any GNU archive site, in case
  193          some other package would contain this missing \`$1' program."
  194     exit 1
  195     ;;
  196 esac
  197 
  198 exit 0