"Fossies" - the Fresh Open Source Software Archive

Member "drupal-8.9.10/sites/default/default.settings.php" (26 Nov 2020, 31870 Bytes) of package /linux/www/drupal-8.9.10.tar.gz:


As a special service "Fossies" has tried to format the requested source page into HTML format using (guessed) PHP source code syntax highlighting (style: standard) with prefixed line numbers and code folding option. Alternatively you can here view or download the uninterpreted source code file. See also the last Fossies "Diffs" side-by-side code changes report for "default.settings.php": 9.0.8_vs_9.1.0-rc1.

    1 <?php
    2 
    3 // @codingStandardsIgnoreFile
    4 
    5 /**
    6  * @file
    7  * Drupal site-specific configuration file.
    8  *
    9  * IMPORTANT NOTE:
   10  * This file may have been set to read-only by the Drupal installation program.
   11  * If you make changes to this file, be sure to protect it again after making
   12  * your modifications. Failure to remove write permissions to this file is a
   13  * security risk.
   14  *
   15  * In order to use the selection rules below the multisite aliasing file named
   16  * sites/sites.php must be present. Its optional settings will be loaded, and
   17  * the aliases in the array $sites will override the default directory rules
   18  * below. See sites/example.sites.php for more information about aliases.
   19  *
   20  * The configuration directory will be discovered by stripping the website's
   21  * hostname from left to right and pathname from right to left. The first
   22  * configuration file found will be used and any others will be ignored. If no
   23  * other configuration file is found then the default configuration file at
   24  * 'sites/default' will be used.
   25  *
   26  * For example, for a fictitious site installed at
   27  * https://www.drupal.org:8080/mysite/test/, the 'settings.php' file is searched
   28  * for in the following directories:
   29  *
   30  * - sites/8080.www.drupal.org.mysite.test
   31  * - sites/www.drupal.org.mysite.test
   32  * - sites/drupal.org.mysite.test
   33  * - sites/org.mysite.test
   34  *
   35  * - sites/8080.www.drupal.org.mysite
   36  * - sites/www.drupal.org.mysite
   37  * - sites/drupal.org.mysite
   38  * - sites/org.mysite
   39  *
   40  * - sites/8080.www.drupal.org
   41  * - sites/www.drupal.org
   42  * - sites/drupal.org
   43  * - sites/org
   44  *
   45  * - sites/default
   46  *
   47  * Note that if you are installing on a non-standard port number, prefix the
   48  * hostname with that number. For example,
   49  * https://www.drupal.org:8080/mysite/test/ could be loaded from
   50  * sites/8080.www.drupal.org.mysite.test/.
   51  *
   52  * @see example.sites.php
   53  * @see \Drupal\Core\DrupalKernel::getSitePath()
   54  *
   55  * In addition to customizing application settings through variables in
   56  * settings.php, you can create a services.yml file in the same directory to
   57  * register custom, site-specific service definitions and/or swap out default
   58  * implementations with custom ones.
   59  */
   60 
   61 /**
   62  * Database settings:
   63  *
   64  * The $databases array specifies the database connection or
   65  * connections that Drupal may use.  Drupal is able to connect
   66  * to multiple databases, including multiple types of databases,
   67  * during the same request.
   68  *
   69  * One example of the simplest connection array is shown below. To use the
   70  * sample settings, copy and uncomment the code below between the @code and
   71  * @endcode lines and paste it after the $databases declaration. You will need
   72  * to replace the database username and password and possibly the host and port
   73  * with the appropriate credentials for your database system.
   74  *
   75  * The next section describes how to customize the $databases array for more
   76  * specific needs.
   77  *
   78  * @code
   79  * $databases['default']['default'] = [
   80  *   'database' => 'databasename',
   81  *   'username' => 'sqlusername',
   82  *   'password' => 'sqlpassword',
   83  *   'host' => 'localhost',
   84  *   'port' => '3306',
   85  *   'driver' => 'mysql',
   86  *   'prefix' => '',
   87  *   'collation' => 'utf8mb4_general_ci',
   88  * ];
   89  * @endcode
   90  */
   91 $databases = [];
   92 
   93 /**
   94  * Customizing database settings.
   95  *
   96  * Many of the values of the $databases array can be customized for your
   97  * particular database system. Refer to the sample in the section above as a
   98  * starting point.
   99  *
  100  * The "driver" property indicates what Drupal database driver the
  101  * connection should use.  This is usually the same as the name of the
  102  * database type, such as mysql or sqlite, but not always.  The other
  103  * properties will vary depending on the driver.  For SQLite, you must
  104  * specify a database file name in a directory that is writable by the
  105  * webserver.  For most other drivers, you must specify a
  106  * username, password, host, and database name.
  107  *
  108  * Drupal core implements drivers for mysql, pgsql, and sqlite. Other drivers
  109  * can be provided by contributed or custom modules. To use a contributed or
  110  * custom driver, the "namespace" property must be set to the namespace of the
  111  * driver. The code in this namespace must be autoloadable prior to connecting
  112  * to the database, and therefore, prior to when module root namespaces are
  113  * added to the autoloader. To add the driver's namespace to the autoloader,
  114  * set the "autoload" property to the PSR-4 base directory of the driver's
  115  * namespace. This is optional for projects managed with Composer if the
  116  * driver's namespace is in Composer's autoloader.
  117  *
  118  * Transaction support is enabled by default for all drivers that support it,
  119  * including MySQL. To explicitly disable it, set the 'transactions' key to
  120  * FALSE.
  121  * Note that some configurations of MySQL, such as the MyISAM engine, don't
  122  * support it and will proceed silently even if enabled. If you experience
  123  * transaction related crashes with such configuration, set the 'transactions'
  124  * key to FALSE.
  125  *
  126  * For each database, you may optionally specify multiple "target" databases.
  127  * A target database allows Drupal to try to send certain queries to a
  128  * different database if it can but fall back to the default connection if not.
  129  * That is useful for primary/replica replication, as Drupal may try to connect
  130  * to a replica server when appropriate and if one is not available will simply
  131  * fall back to the single primary server (The terms primary/replica are
  132  * traditionally referred to as master/slave in database server documentation).
  133  *
  134  * The general format for the $databases array is as follows:
  135  * @code
  136  * $databases['default']['default'] = $info_array;
  137  * $databases['default']['replica'][] = $info_array;
  138  * $databases['default']['replica'][] = $info_array;
  139  * $databases['extra']['default'] = $info_array;
  140  * @endcode
  141  *
  142  * In the above example, $info_array is an array of settings described above.
  143  * The first line sets a "default" database that has one primary database
  144  * (the second level default).  The second and third lines create an array
  145  * of potential replica databases.  Drupal will select one at random for a given
  146  * request as needed.  The fourth line creates a new database with a name of
  147  * "extra".
  148  *
  149  * You can optionally set prefixes for some or all database table names
  150  * by using the 'prefix' setting. If a prefix is specified, the table
  151  * name will be prepended with its value. Be sure to use valid database
  152  * characters only, usually alphanumeric and underscore. If no prefixes
  153  * are desired, leave it as an empty string ''.
  154  *
  155  * To have all database names prefixed, set 'prefix' as a string:
  156  * @code
  157  *   'prefix' => 'main_',
  158  * @endcode
  159  *
  160  * Per-table prefixes are deprecated as of Drupal 8.2, and will be removed in
  161  * Drupal 9.0. After that, only a single prefix for all tables will be
  162  * supported.
  163  *
  164  * To provide prefixes for specific tables, set 'prefix' as an array.
  165  * The array's keys are the table names and the values are the prefixes.
  166  * The 'default' element is mandatory and holds the prefix for any tables
  167  * not specified elsewhere in the array. Example:
  168  * @code
  169  *   'prefix' => [
  170  *     'default'   => 'main_',
  171  *     'users'     => 'shared_',
  172  *     'sessions'  => 'shared_',
  173  *     'role'      => 'shared_',
  174  *     'authmap'   => 'shared_',
  175  *   ],
  176  * @endcode
  177  * You can also use a reference to a schema/database as a prefix. This may be
  178  * useful if your Drupal installation exists in a schema that is not the default
  179  * or you want to access several databases from the same code base at the same
  180  * time.
  181  * Example:
  182  * @code
  183  *   'prefix' => [
  184  *     'default'   => 'main.',
  185  *     'users'     => 'shared.',
  186  *     'sessions'  => 'shared.',
  187  *     'role'      => 'shared.',
  188  *     'authmap'   => 'shared.',
  189  *   ];
  190  * @endcode
  191  * NOTE: MySQL and SQLite's definition of a schema is a database.
  192  *
  193  * Advanced users can add or override initial commands to execute when
  194  * connecting to the database server, as well as PDO connection settings. For
  195  * example, to enable MySQL SELECT queries to exceed the max_join_size system
  196  * variable, and to reduce the database connection timeout to 5 seconds:
  197  * @code
  198  * $databases['default']['default'] = [
  199  *   'init_commands' => [
  200  *     'big_selects' => 'SET SQL_BIG_SELECTS=1',
  201  *   ],
  202  *   'pdo' => [
  203  *     PDO::ATTR_TIMEOUT => 5,
  204  *   ],
  205  * ];
  206  * @endcode
  207  *
  208  * WARNING: The above defaults are designed for database portability. Changing
  209  * them may cause unexpected behavior, including potential data loss. See
  210  * https://www.drupal.org/developing/api/database/configuration for more
  211  * information on these defaults and the potential issues.
  212  *
  213  * More details can be found in the constructor methods for each driver:
  214  * - \Drupal\Core\Database\Driver\mysql\Connection::__construct()
  215  * - \Drupal\Core\Database\Driver\pgsql\Connection::__construct()
  216  * - \Drupal\Core\Database\Driver\sqlite\Connection::__construct()
  217  *
  218  * Sample Database configuration format for PostgreSQL (pgsql):
  219  * @code
  220  *   $databases['default']['default'] = [
  221  *     'driver' => 'pgsql',
  222  *     'database' => 'databasename',
  223  *     'username' => 'sqlusername',
  224  *     'password' => 'sqlpassword',
  225  *     'host' => 'localhost',
  226  *     'prefix' => '',
  227  *   ];
  228  * @endcode
  229  *
  230  * Sample Database configuration format for SQLite (sqlite):
  231  * @code
  232  *   $databases['default']['default'] = [
  233  *     'driver' => 'sqlite',
  234  *     'database' => '/path/to/databasefilename',
  235  *   ];
  236  * @endcode
  237  *
  238  * Sample Database configuration format for a driver in a contributed module:
  239  * @code
  240  *   $databases['default']['default'] = [
  241  *     'driver' => 'mydriver',
  242  *     'namespace' => 'Drupal\mymodule\Driver\Database\mydriver',
  243  *     'autoload' => 'modules/mymodule/src/Driver/Database/mydriver/',
  244  *     'database' => 'databasename',
  245  *     'username' => 'sqlusername',
  246  *     'password' => 'sqlpassword',
  247  *     'host' => 'localhost',
  248  *     'prefix' => '',
  249  *   ];
  250  * @endcode
  251  */
  252 
  253 /**
  254  * Location of the site configuration files.
  255  *
  256  * The $settings['config_sync_directory'] specifies the location of file system
  257  * directory used for syncing configuration data. On install, the directory is
  258  * created. This is used for configuration imports.
  259  *
  260  * The default location for this directory is inside a randomly-named
  261  * directory in the public files path. The setting below allows you to set
  262  * its location.
  263  */
  264 # $settings['config_sync_directory'] = '/directory/outside/webroot';
  265 
  266 /**
  267  * Settings:
  268  *
  269  * $settings contains environment-specific configuration, such as the files
  270  * directory and reverse proxy address, and temporary configuration, such as
  271  * security overrides.
  272  *
  273  * @see \Drupal\Core\Site\Settings::get()
  274  */
  275 
  276 /**
  277  * Salt for one-time login links, cancel links, form tokens, etc.
  278  *
  279  * This variable will be set to a random value by the installer. All one-time
  280  * login links will be invalidated if the value is changed. Note that if your
  281  * site is deployed on a cluster of web servers, you must ensure that this
  282  * variable has the same value on each server.
  283  *
  284  * For enhanced security, you may set this variable to the contents of a file
  285  * outside your document root; you should also ensure that this file is not
  286  * stored with backups of your database.
  287  *
  288  * Example:
  289  * @code
  290  *   $settings['hash_salt'] = file_get_contents('/home/example/salt.txt');
  291  * @endcode
  292  */
  293 $settings['hash_salt'] = '';
  294 
  295 /**
  296  * Deployment identifier.
  297  *
  298  * Drupal's dependency injection container will be automatically invalidated and
  299  * rebuilt when the Drupal core version changes. When updating contributed or
  300  * custom code that changes the container, changing this identifier will also
  301  * allow the container to be invalidated as soon as code is deployed.
  302  */
  303 # $settings['deployment_identifier'] = \Drupal::VERSION;
  304 
  305 /**
  306  * Access control for update.php script.
  307  *
  308  * If you are updating your Drupal installation using the update.php script but
  309  * are not logged in using either an account with the "Administer software
  310  * updates" permission or the site maintenance account (the account that was
  311  * created during installation), you will need to modify the access check
  312  * statement below. Change the FALSE to a TRUE to disable the access check.
  313  * After finishing the upgrade, be sure to open this file again and change the
  314  * TRUE back to a FALSE!
  315  */
  316 $settings['update_free_access'] = FALSE;
  317 
  318 /**
  319  * External access proxy settings:
  320  *
  321  * If your site must access the Internet via a web proxy then you can enter the
  322  * proxy settings here. Set the full URL of the proxy, including the port, in
  323  * variables:
  324  * - $settings['http_client_config']['proxy']['http']: The proxy URL for HTTP
  325  *   requests.
  326  * - $settings['http_client_config']['proxy']['https']: The proxy URL for HTTPS
  327  *   requests.
  328  * You can pass in the user name and password for basic authentication in the
  329  * URLs in these settings.
  330  *
  331  * You can also define an array of host names that can be accessed directly,
  332  * bypassing the proxy, in $settings['http_client_config']['proxy']['no'].
  333  */
  334 # $settings['http_client_config']['proxy']['http'] = 'http://proxy_user:proxy_pass@example.com:8080';
  335 # $settings['http_client_config']['proxy']['https'] = 'http://proxy_user:proxy_pass@example.com:8080';
  336 # $settings['http_client_config']['proxy']['no'] = ['127.0.0.1', 'localhost'];
  337 
  338 /**
  339  * Reverse Proxy Configuration:
  340  *
  341  * Reverse proxy servers are often used to enhance the performance
  342  * of heavily visited sites and may also provide other site caching,
  343  * security, or encryption benefits. In an environment where Drupal
  344  * is behind a reverse proxy, the real IP address of the client should
  345  * be determined such that the correct client IP address is available
  346  * to Drupal's logging, statistics, and access management systems. In
  347  * the most simple scenario, the proxy server will add an
  348  * X-Forwarded-For header to the request that contains the client IP
  349  * address. However, HTTP headers are vulnerable to spoofing, where a
  350  * malicious client could bypass restrictions by setting the
  351  * X-Forwarded-For header directly. Therefore, Drupal's proxy
  352  * configuration requires the IP addresses of all remote proxies to be
  353  * specified in $settings['reverse_proxy_addresses'] to work correctly.
  354  *
  355  * Enable this setting to get Drupal to determine the client IP from the
  356  * X-Forwarded-For header. If you are unsure about this setting, do not have a
  357  * reverse proxy, or Drupal operates in a shared hosting environment, this
  358  * setting should remain commented out.
  359  *
  360  * In order for this setting to be used you must specify every possible
  361  * reverse proxy IP address in $settings['reverse_proxy_addresses'].
  362  * If a complete list of reverse proxies is not available in your
  363  * environment (for example, if you use a CDN) you may set the
  364  * $_SERVER['REMOTE_ADDR'] variable directly in settings.php.
  365  * Be aware, however, that it is likely that this would allow IP
  366  * address spoofing unless more advanced precautions are taken.
  367  */
  368 # $settings['reverse_proxy'] = TRUE;
  369 
  370 /**
  371  * Specify every reverse proxy IP address in your environment.
  372  * This setting is required if $settings['reverse_proxy'] is TRUE.
  373  */
  374 # $settings['reverse_proxy_addresses'] = ['a.b.c.d', ...];
  375 
  376 /**
  377  * Reverse proxy trusted headers.
  378  *
  379  * Sets which headers to trust from your reverse proxy.
  380  *
  381  * Common values are:
  382  * - \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_ALL
  383  * - \Symfony\Component\HttpFoundation\Request::HEADER_FORWARDED
  384  *
  385  * Note the default value of
  386  * @code
  387  * \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_ALL | \Symfony\Component\HttpFoundation\Request::HEADER_FORWARDED
  388  * @endcode
  389  * is not secure by default. The value should be set to only the specific
  390  * headers the reverse proxy uses. For example:
  391  * @code
  392  * \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_ALL
  393  * @endcode
  394  * This would trust the following headers:
  395  * - X_FORWARDED_FOR
  396  * - X_FORWARDED_HOST
  397  * - X_FORWARDED_PROTO
  398  * - X_FORWARDED_PORT
  399  *
  400  * @see \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_ALL
  401  * @see \Symfony\Component\HttpFoundation\Request::HEADER_FORWARDED
  402  * @see \Symfony\Component\HttpFoundation\Request::setTrustedProxies
  403  */
  404 # $settings['reverse_proxy_trusted_headers'] = \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_ALL | \Symfony\Component\HttpFoundation\Request::HEADER_FORWARDED;
  405 
  406 
  407 /**
  408  * Page caching:
  409  *
  410  * By default, Drupal sends a "Vary: Cookie" HTTP header for anonymous page
  411  * views. This tells a HTTP proxy that it may return a page from its local
  412  * cache without contacting the web server, if the user sends the same Cookie
  413  * header as the user who originally requested the cached page. Without "Vary:
  414  * Cookie", authenticated users would also be served the anonymous page from
  415  * the cache. If the site has mostly anonymous users except a few known
  416  * editors/administrators, the Vary header can be omitted. This allows for
  417  * better caching in HTTP proxies (including reverse proxies), i.e. even if
  418  * clients send different cookies, they still get content served from the cache.
  419  * However, authenticated users should access the site directly (i.e. not use an
  420  * HTTP proxy, and bypass the reverse proxy if one is used) in order to avoid
  421  * getting cached pages from the proxy.
  422  */
  423 # $settings['omit_vary_cookie'] = TRUE;
  424 
  425 
  426 /**
  427  * Cache TTL for client error (4xx) responses.
  428  *
  429  * Items cached per-URL tend to result in a large number of cache items, and
  430  * this can be problematic on 404 pages which by their nature are unbounded. A
  431  * fixed TTL can be set for these items, defaulting to one hour, so that cache
  432  * backends which do not support LRU can purge older entries. To disable caching
  433  * of client error responses set the value to 0. Currently applies only to
  434  * page_cache module.
  435  */
  436 # $settings['cache_ttl_4xx'] = 3600;
  437 
  438 /**
  439  * Expiration of cached forms.
  440  *
  441  * Drupal's Form API stores details of forms in a cache and these entries are
  442  * kept for at least 6 hours by default. Expired entries are cleared by cron.
  443  *
  444  * @see \Drupal\Core\Form\FormCache::setCache()
  445  */
  446 # $settings['form_cache_expiration'] = 21600;
  447 
  448 /**
  449  * Class Loader.
  450  *
  451  * If the APC extension is detected, the Symfony APC class loader is used for
  452  * performance reasons. Detection can be prevented by setting
  453  * class_loader_auto_detect to false, as in the example below.
  454  */
  455 # $settings['class_loader_auto_detect'] = FALSE;
  456 
  457 /*
  458  * If the APC extension is not detected, either because APC is missing or
  459  * because auto-detection has been disabled, auto-loading falls back to
  460  * Composer's ClassLoader, which is good for development as it does not break
  461  * when code is moved in the file system. You can also decorate the base class
  462  * loader with another cached solution than the Symfony APC class loader, as
  463  * all production sites should have a cached class loader of some sort enabled.
  464  *
  465  * To do so, you may decorate and replace the local $class_loader variable. For
  466  * example, to use Symfony's APC class loader without automatic detection,
  467  * uncomment the code below.
  468  */
  469 /*
  470 if ($settings['hash_salt']) {
  471   $prefix = 'drupal.' . hash('sha256', 'drupal.' . $settings['hash_salt']);
  472   $apc_loader = new \Symfony\Component\ClassLoader\ApcClassLoader($prefix, $class_loader);
  473   unset($prefix);
  474   $class_loader->unregister();
  475   $apc_loader->register();
  476   $class_loader = $apc_loader;
  477 }
  478 */
  479 
  480 /**
  481  * Authorized file system operations:
  482  *
  483  * The Update Manager module included with Drupal provides a mechanism for
  484  * site administrators to securely install missing updates for the site
  485  * directly through the web user interface. On securely-configured servers,
  486  * the Update manager will require the administrator to provide SSH or FTP
  487  * credentials before allowing the installation to proceed; this allows the
  488  * site to update the new files as the user who owns all the Drupal files,
  489  * instead of as the user the webserver is running as. On servers where the
  490  * webserver user is itself the owner of the Drupal files, the administrator
  491  * will not be prompted for SSH or FTP credentials (note that these server
  492  * setups are common on shared hosting, but are inherently insecure).
  493  *
  494  * Some sites might wish to disable the above functionality, and only update
  495  * the code directly via SSH or FTP themselves. This setting completely
  496  * disables all functionality related to these authorized file operations.
  497  *
  498  * @see https://www.drupal.org/node/244924
  499  *
  500  * Remove the leading hash signs to disable.
  501  */
  502 # $settings['allow_authorize_operations'] = FALSE;
  503 
  504 /**
  505  * Default mode for directories and files written by Drupal.
  506  *
  507  * Value should be in PHP Octal Notation, with leading zero.
  508  */
  509 # $settings['file_chmod_directory'] = 0775;
  510 # $settings['file_chmod_file'] = 0664;
  511 
  512 /**
  513  * Public file base URL:
  514  *
  515  * An alternative base URL to be used for serving public files. This must
  516  * include any leading directory path.
  517  *
  518  * A different value from the domain used by Drupal to be used for accessing
  519  * public files. This can be used for a simple CDN integration, or to improve
  520  * security by serving user-uploaded files from a different domain or subdomain
  521  * pointing to the same server. Do not include a trailing slash.
  522  */
  523 # $settings['file_public_base_url'] = 'http://downloads.example.com/files';
  524 
  525 /**
  526  * Public file path:
  527  *
  528  * A local file system path where public files will be stored. This directory
  529  * must exist and be writable by Drupal. This directory must be relative to
  530  * the Drupal installation directory and be accessible over the web.
  531  */
  532 # $settings['file_public_path'] = 'sites/default/files';
  533 
  534 /**
  535  * Private file path:
  536  *
  537  * A local file system path where private files will be stored. This directory
  538  * must be absolute, outside of the Drupal installation directory and not
  539  * accessible over the web.
  540  *
  541  * Note: Caches need to be cleared when this value is changed to make the
  542  * private:// stream wrapper available to the system.
  543  *
  544  * See https://www.drupal.org/documentation/modules/file for more information
  545  * about securing private files.
  546  */
  547 # $settings['file_private_path'] = '';
  548 
  549 /**
  550  * Temporary file path:
  551  *
  552  * A local file system path where temporary files will be stored. This directory
  553  * must be absolute, outside of the Drupal installation directory and not
  554  * accessible over the web.
  555  *
  556  * If this is not set, the default for the operating system will be used.
  557  *
  558  * @see \Drupal\Component\FileSystem\FileSystem::getOsTemporaryDirectory()
  559  */
  560 # $settings['file_temp_path'] = '/tmp';
  561 
  562 /**
  563  * Session write interval:
  564  *
  565  * Set the minimum interval between each session write to database.
  566  * For performance reasons it defaults to 180.
  567  */
  568 # $settings['session_write_interval'] = 180;
  569 
  570 /**
  571  * String overrides:
  572  *
  573  * To override specific strings on your site with or without enabling the Locale
  574  * module, add an entry to this list. This functionality allows you to change
  575  * a small number of your site's default English language interface strings.
  576  *
  577  * Remove the leading hash signs to enable.
  578  *
  579  * The "en" part of the variable name, is dynamic and can be any langcode of
  580  * any added language. (eg locale_custom_strings_de for german).
  581  */
  582 # $settings['locale_custom_strings_en'][''] = [
  583 #   'forum'      => 'Discussion board',
  584 #   '@count min' => '@count minutes',
  585 # ];
  586 
  587 /**
  588  * A custom theme for the offline page:
  589  *
  590  * This applies when the site is explicitly set to maintenance mode through the
  591  * administration page or when the database is inactive due to an error.
  592  * The template file should also be copied into the theme. It is located inside
  593  * 'core/modules/system/templates/maintenance-page.html.twig'.
  594  *
  595  * Note: This setting does not apply to installation and update pages.
  596  */
  597 # $settings['maintenance_theme'] = 'bartik';
  598 
  599 /**
  600  * PHP settings:
  601  *
  602  * To see what PHP settings are possible, including whether they can be set at
  603  * runtime (by using ini_set()), read the PHP documentation:
  604  * http://php.net/manual/ini.list.php
  605  * See \Drupal\Core\DrupalKernel::bootEnvironment() for required runtime
  606  * settings and the .htaccess file for non-runtime settings.
  607  * Settings defined there should not be duplicated here so as to avoid conflict
  608  * issues.
  609  */
  610 
  611 /**
  612  * If you encounter a situation where users post a large amount of text, and
  613  * the result is stripped out upon viewing but can still be edited, Drupal's
  614  * output filter may not have sufficient memory to process it.  If you
  615  * experience this issue, you may wish to uncomment the following two lines
  616  * and increase the limits of these variables.  For more information, see
  617  * http://php.net/manual/pcre.configuration.php.
  618  */
  619 # ini_set('pcre.backtrack_limit', 200000);
  620 # ini_set('pcre.recursion_limit', 200000);
  621 
  622 /**
  623  * Configuration overrides.
  624  *
  625  * To globally override specific configuration values for this site,
  626  * set them here. You usually don't need to use this feature. This is
  627  * useful in a configuration file for a vhost or directory, rather than
  628  * the default settings.php.
  629  *
  630  * Note that any values you provide in these variable overrides will not be
  631  * viewable from the Drupal administration interface. The administration
  632  * interface displays the values stored in configuration so that you can stage
  633  * changes to other environments that don't have the overrides.
  634  *
  635  * There are particular configuration values that are risky to override. For
  636  * example, overriding the list of installed modules in 'core.extension' is not
  637  * supported as module install or uninstall has not occurred. Other examples
  638  * include field storage configuration, because it has effects on database
  639  * structure, and 'core.menu.static_menu_link_overrides' since this is cached in
  640  * a way that is not config override aware. Also, note that changing
  641  * configuration values in settings.php will not fire any of the configuration
  642  * change events.
  643  */
  644 # $config['system.site']['name'] = 'My Drupal site';
  645 # $config['user.settings']['anonymous'] = 'Visitor';
  646 
  647 /**
  648  * Fast 404 pages:
  649  *
  650  * Drupal can generate fully themed 404 pages. However, some of these responses
  651  * are for images or other resource files that are not displayed to the user.
  652  * This can waste bandwidth, and also generate server load.
  653  *
  654  * The options below return a simple, fast 404 page for URLs matching a
  655  * specific pattern:
  656  * - $config['system.performance']['fast_404']['exclude_paths']: A regular
  657  *   expression to match paths to exclude, such as images generated by image
  658  *   styles, or dynamically-resized images. The default pattern provided below
  659  *   also excludes the private file system. If you need to add more paths, you
  660  *   can add '|path' to the expression.
  661  * - $config['system.performance']['fast_404']['paths']: A regular expression to
  662  *   match paths that should return a simple 404 page, rather than the fully
  663  *   themed 404 page. If you don't have any aliases ending in htm or html you
  664  *   can add '|s?html?' to the expression.
  665  * - $config['system.performance']['fast_404']['html']: The html to return for
  666  *   simple 404 pages.
  667  *
  668  * Remove the leading hash signs if you would like to alter this functionality.
  669  */
  670 # $config['system.performance']['fast_404']['exclude_paths'] = '/\/(?:styles)|(?:system\/files)\//';
  671 # $config['system.performance']['fast_404']['paths'] = '/\.(?:txt|png|gif|jpe?g|css|js|ico|swf|flv|cgi|bat|pl|dll|exe|asp)$/i';
  672 # $config['system.performance']['fast_404']['html'] = '<!DOCTYPE html><html><head><title>404 Not Found</title></head><body><h1>Not Found</h1><p>The requested URL "@path" was not found on this server.</p></body></html>';
  673 
  674 /**
  675  * Load services definition file.
  676  */
  677 $settings['container_yamls'][] = $app_root . '/' . $site_path . '/services.yml';
  678 
  679 /**
  680  * Override the default service container class.
  681  *
  682  * This is useful for example to trace the service container for performance
  683  * tracking purposes, for testing a service container with an error condition or
  684  * to test a service container that throws an exception.
  685  */
  686 # $settings['container_base_class'] = '\Drupal\Core\DependencyInjection\Container';
  687 
  688 /**
  689  * Override the default yaml parser class.
  690  *
  691  * Provide a fully qualified class name here if you would like to provide an
  692  * alternate implementation YAML parser. The class must implement the
  693  * \Drupal\Component\Serialization\SerializationInterface interface.
  694  */
  695 # $settings['yaml_parser_class'] = NULL;
  696 
  697 /**
  698  * Trusted host configuration.
  699  *
  700  * Drupal core can use the Symfony trusted host mechanism to prevent HTTP Host
  701  * header spoofing.
  702  *
  703  * To enable the trusted host mechanism, you enable your allowable hosts
  704  * in $settings['trusted_host_patterns']. This should be an array of regular
  705  * expression patterns, without delimiters, representing the hosts you would
  706  * like to allow.
  707  *
  708  * For example:
  709  * @code
  710  * $settings['trusted_host_patterns'] = [
  711  *   '^www\.example\.com$',
  712  * ];
  713  * @endcode
  714  * will allow the site to only run from www.example.com.
  715  *
  716  * If you are running multisite, or if you are running your site from
  717  * different domain names (eg, you don't redirect http://www.example.com to
  718  * http://example.com), you should specify all of the host patterns that are
  719  * allowed by your site.
  720  *
  721  * For example:
  722  * @code
  723  * $settings['trusted_host_patterns'] = [
  724  *   '^example\.com$',
  725  *   '^.+\.example\.com$',
  726  *   '^example\.org$',
  727  *   '^.+\.example\.org$',
  728  * ];
  729  * @endcode
  730  * will allow the site to run off of all variants of example.com and
  731  * example.org, with all subdomains included.
  732  */
  733 
  734 /**
  735  * The default list of directories that will be ignored by Drupal's file API.
  736  *
  737  * By default ignore node_modules and bower_components folders to avoid issues
  738  * with common frontend tools and recursive scanning of directories looking for
  739  * extensions.
  740  *
  741  * @see \Drupal\Core\File\FileSystemInterface::scanDirectory()
  742  * @see \Drupal\Core\Extension\ExtensionDiscovery::scanDirectory()
  743  */
  744 $settings['file_scan_ignore_directories'] = [
  745   'node_modules',
  746   'bower_components',
  747 ];
  748 
  749 /**
  750  * The default number of entities to update in a batch process.
  751  *
  752  * This is used by update and post-update functions that need to go through and
  753  * change all the entities on a site, so it is useful to increase this number
  754  * if your hosting configuration (i.e. RAM allocation, CPU speed) allows for a
  755  * larger number of entities to be processed in a single batch run.
  756  */
  757 $settings['entity_update_batch_size'] = 50;
  758 
  759 /**
  760  * Entity update backup.
  761  *
  762  * This is used to inform the entity storage handler that the backup tables as
  763  * well as the original entity type and field storage definitions should be
  764  * retained after a successful entity update process.
  765  */
  766 $settings['entity_update_backup'] = TRUE;
  767 
  768 /**
  769  * Node migration type.
  770  *
  771  * This is used to force the migration system to use the classic node migrations
  772  * instead of the default complete node migrations. The migration system will
  773  * use the classic node migration only if there are existing migrate_map tables
  774  * for the classic node migrations and they contain data. These tables may not
  775  * exist if you are developing custom migrations and do not want to use the
  776  * complete node migrations. Set this to TRUE to force the use of the classic
  777  * node migrations.
  778  */
  779 $settings['migrate_node_migrate_type_classic'] = FALSE;
  780 
  781 /**
  782  * Load local development override configuration, if available.
  783  *
  784  * Create a settings.local.php file to override variables on secondary (staging,
  785  * development, etc.) installations of this site.
  786  *
  787  * Typical uses of settings.local.php include:
  788  * - Disabling caching.
  789  * - Disabling JavaScript/CSS compression.
  790  * - Rerouting outgoing emails.
  791  *
  792  * Keep this code block at the end of this file to take full effect.
  793  */
  794 #
  795 # if (file_exists($app_root . '/' . $site_path . '/settings.local.php')) {
  796 #   include $app_root . '/' . $site_path . '/settings.local.php';
  797 # }