"Fossies" - the Fresh Open Source Software Archive

Member "buildah-1.27.2/CHANGELOG.md" (20 Sep 2022, 119008 Bytes) of package /linux/misc/buildah-1.27.2.tar.gz:

As a special service "Fossies" has tried to format the requested source page into HTML format (assuming markdown format). Alternatively you can here view or download the uninterpreted source code file. A member file download can also be achieved by clicking within a package contents listing on the according byte size field. See also the latest Fossies "Diffs" side-by-side code changes report for "CHANGELOG.md": 1.27.1_vs_1.27.2.

buildah logo


v1.27.2 (2022-09-20)

build: backport the --skip-unused-stages flag.

v1.27.1 (2022-09-09)

run: add container gid to additional groups.

v1.27.0 (2022-08-01)

build: support filtering cache by duration using `--cache-ttl`.
build: support building from commit when using git repo as build context.
build: clean up git repos correctly when using subdirs.
build: add support for distributing cache to remote sources using `--cache-to` and `--cache-from`.
imagebuildah: optimize cache hits for `COPY` and `ADD` instructions.
build: support OCI hooks for ephemeral build containers.
build: add support for `--userns=auto`.
copier: add NoOverwriteNonDirDir option .
add initial support for building images using Buildah on FreeBSD.
multistage: this now skips the computing of unwanted stages to improve performance.
multiarch: support splitting build logs for `--platform` using `--logsplit`.
build: add support for building images where the base image has no history.
commit: allow disabling image history with `--omit-history`.
build: add support for renaming a device in rootless setups.
build: now supports additionalBuildContext in builds via the `--build-context` option.
build: `--output` produces artifacts even if the build container is not committed.
build: now accepts `-cpp-flag`, allowing users to pass in CPP flags when processing a Containerfile with C Preprocessor-like syntax.
build: now accepts a branch and a subdirectory when the build context is a git repository.
build: output now shows a progress bar while pushing and pulling images
build: now errors out if the path to Containerfile is a directory.
build: support building container images on environments that are rootless and without any valid login sessions.
fix: `--output` now generates artifacts even if the entire build is cached.
fix: `--output` generates artifacts only for the target stage in multi-stage builds.
fix,add: now fails on a bad HTTP response instead of writing to container
fix,squash: never use build cache when computing the last step of the last stage
fix,build,run: allow reusing secret more than once in different RUN steps
fix: compatibility with Docker build by making its --label and --annotate options set empty labels and annotations when given a name but no `=` or label value.

v1.26.0 (2022-05-04)

imagebuildah,build: move deepcopy of args before we spawn goroutine
Vendor in containers/storage v1.40.2
buildah.BuilderOptions.DefaultEnv is ignored, so mark it as deprecated
help output: get more consistent about option usage text
Handle OS version and features flags
buildah build: --annotation and --label should remove values
buildah build: add a --env
buildah: deep copy options.Args before performing concurrent build/stage
test: inline platform and builtinargs behaviour
vendor: bump imagebuilder to master/009dbc6
build: automatically set correct TARGETPLATFORM where expected
build(deps): bump github.com/fsouza/go-dockerclient
Vendor in containers/(common, storage, image)
imagebuildah, executor: process arg variables while populating baseMap
buildkit: add support for custom build output with --output
Cirrus: Update CI VMs to F36
fix staticcheck linter warning for deprecated function
Fix docs build on FreeBSD
build(deps): bump github.com/containernetworking/cni from 1.0.1 to 1.1.0
copier.unwrapError(): update for Go 1.16
copier.PutOptions: add StripSetuidBit/StripSetgidBit/StripStickyBit
copier.Put(): write to read-only directories
build(deps): bump github.com/cpuguy83/go-md2man/v2 in /tests/tools
Rename $TESTSDIR (the plural one), step 4 of 3
Rename $TESTSDIR (the plural one), step 3 of 3
Rename $TESTSDIR (the plural one), step 2 of 3
Rename $TESTSDIR (the plural one), step 1 of 3
build(deps): bump github.com/containerd/containerd from 1.6.2 to 1.6.3
Ed's periodic test cleanup
using consistent lowercase 'invalid' word in returned err msg
Update vendor of containers/(common,storage,image)
use etchosts package from c/common
run: set actual hostname in /etc/hostname to match docker parity
update c/common to latest main
Update vendor of containers/(common,storage,image)
Stop littering
manifest-create: allow creating manifest list from local image
Update vendor of storage,common,image
Bump golang.org/x/crypto to 7b82a4e
Initialize network backend before first pull
oci spec: change special mount points for namespaces
tests/helpers.bash: assert handle corner cases correctly
buildah: actually use containers.conf settings
integration tests: learn to start a dummy registry
Fix error check to work on Podman
buildah build should accept at most one arg
tests: reduce concurrency for flaky bud-multiple-platform-no-run
vendor in latest containers/common,image,storage
manifest-add: allow override arch,variant while adding image
Remove a stray `\` from .containerenv
Vendor in latest opencontainers/selinux v1.10.1
build, commit: allow removing default identity labels
Create shorter names for containers based on image IDs
test: skip rootless on cgroupv2 in root env
fix hang when oci runtime fails
Set permissions for GitHub actions
copier test: use correct UID/GID in test archives
run: set parent-death signals and forward SIGHUP/SIGINT/SIGTERM
Bump back to v1.26.0-dev
build(deps): bump github.com/opencontainers/runc from 1.1.0 to 1.1.1
Included the URL to check the SHA

v1.25.1 (2022-03-30)

buildah: create WORKDIR with USER permissions
vendor: update github.com/openshift/imagebuilder
copier: attempt to open the dir before adding it
Updated dependabot to get updates for GitHub actions.
Switch most calls to filepath.Walk to filepath.WalkDir
build: allow --no-cache and --layers so build cache can be overrided
build(deps): bump github.com/onsi/gomega from 1.18.1 to 1.19.0
Bump to v1.26.0-dev
build(deps): bump github.com/golangci/golangci-lint in /tests/tools

v1.25.0 (2022-03-25)

install: drop RHEL/CentOS 7 doc
build(deps): bump github.com/containers/common from 0.47.4 to 0.47.5
Bump c/storage to v1.39.0 in main
Add a test for CVE-2022-27651
build(deps): bump github.com/docker/docker
Bump github.com/prometheus/client_golang to v1.11.1
[CI:DOCS] man pages: sort flags, and keep them that way
build(deps): bump github.com/containerd/containerd from 1.6.1 to 1.6.2
Don't pollute
network setup: increase timeout to 4 minutes
do not set the inheritable capabilities
build(deps): bump github.com/golangci/golangci-lint in /tests/tools
build(deps): bump github.com/containers/ocicrypt from 1.1.2 to 1.1.3
parse: convert exposed GetVolumes to internal only
buildkit: mount=type=cache support locking external cache store
.in support: improve error message when cpp is not installed
buildah image: install cpp
build(deps): bump github.com/stretchr/testify from 1.7.0 to 1.7.1
build(deps): bump github.com/spf13/cobra from 1.3.0 to 1.4.0
build(deps): bump github.com/docker/docker
Add --no-hosts flag to eliminate use of /etc/hosts within containers
test: remove skips for rootless users
test: unshare mount/umount if test is_rootless
tests/copy: read correct containers.conf
build(deps): bump github.com/docker/distribution
cirrus: add seperate task and matrix for rootless
tests: skip tests for rootless which need unshare
buildah: test rootless integration
vendor: bump c/storage to main/93ce26691863
build(deps): bump github.com/fsouza/go-dockerclient from 1.7.9 to 1.7.10
tests/copy: initialize the network, too
[CI:DOCS] remove references to Kubic for CentOS and Ubuntu
build(deps): bump github.com/containerd/containerd from 1.6.0 to 1.6.1
use c/image/pkg/blobcache
vendor c/image/v5@v5.20.0
add: ensure the context directory is an absolute path
executor: docker builds must inherit healthconfig from base if any
docs: Remove Containerfile and containeringore
build(deps): bump github.com/fsouza/go-dockerclient from 1.7.8 to 1.7.9
helpers.bash: Use correct syntax
speed up combination-namespaces test
build(deps): bump github.com/golangci/golangci-lint in /tests/tools
Bump back to 1.25.0-dev
build(deps): bump github.com/containerd/containerd from 1.5.9 to 1.6.0

v1.24.2 (2022-02-16)

Increase subuid/subgid to 65535
history: only add proxy vars to history if specified
run_linux: use --systemd-cgroup
buildah: new global option --cgroup-manager
Makefile: build with systemd when available
build(deps): bump github.com/fsouza/go-dockerclient from 1.7.7 to 1.7.8
Bump c/common to v0.47.4
Cirrus: Use updated VM images
conformance: add a few "replace-directory-with-symlink" tests
Bump back to v1.25.0-dev

v1.24.1 (2022-02-03)

executor: Add support for inline --platform within Dockerfile
caps: fix buildah run --cap-add=all
Update vendor of openshift/imagebuilder
Bump version of containers/image and containers/common
Update vendor of containers/common
System tests: fix accidental vandalism of source dir
build(deps): bump github.com/containers/storage from 1.38.1 to 1.38.2
imagebuildah.BuildDockerfiles(): create the jobs semaphore
build(deps): bump github.com/onsi/gomega from 1.18.0 to 1.18.1
overlay: always honor mountProgram
overlay: move mount program invocation to separate function
overlay: move mount program lookup to separate function
Bump to v1.25.0-dev [NO TESTS NEEDED]

v1.24.0 (2022-01-26)

Update vendor of containers/common
build(deps): bump github.com/golangci/golangci-lint in /tests/tools
Github-workflow: Report both failures and errors.
build(deps): bump github.com/containers/image/v5 from 5.18.0 to 5.19.0
Update docs/buildah-build.1.md
[CI:DOCS] Fix typos and improve language
buildah bud --network add support for custom networks
Make pull commands be consistent
docs/buildah-build.1.md: don't imply that -v isn't just a RUN thing
build(deps): bump github.com/onsi/gomega from 1.17.0 to 1.18.0
Vendor in latest containers/image
Run codespell on code
.github/dependabot.yml: add tests/tools go.mod
CI: rm git-validation, add GHA job to validate PRs
tests/tools: bump go-md2man to v2.0.1
tests/tools/Makefile: simplify
tests/tools: bump onsi/ginkgo to v1.16.5
vendor: bump c/common and others
mount: add support for custom upper and workdir with overlay mounts
linux: fix lookup for runtime
overlay: add MountWithOptions to API which extends support for advanced overlay
Allow processing of SystemContext from FlagSet
.golangci.yml: enable unparam linter
util/resolveName: rm bool return
tests/tools: bump golangci-lint
.gitignore: fixups
all: fix capabilities.NewPid deprecation warnings
bind/mount.go: fix linter comment
all: fix gosimple warning S1039
tests/e2e/buildah_suite_test.go: fix gosimple warnings
imagebuildah/executor.go: fix gosimple warning
util.go: fix gosimple warning
build(deps): bump github.com/opencontainers/runc from 1.0.3 to 1.1.0
Enable git-daemon tests
Allow processing of id options from FlagSet
Cirrus: Re-order tasks for more parallelism
Cirrus: Freshen VM images
Fix platform handling for empty os/arch values
Allow processing of network options from FlagSet
Fix permissions on  secrets directory
Update containers/image and containers/common
bud.bats: use a local git daemon for the git protocol test
Allow processing of common options from FlagSet
Cirrus: Run int. tests in parallel with unit
vendor c/common
Fix default CNI paths
build(deps): bump github.com/fsouza/go-dockerclient from 1.7.6 to 1.7.7
multi-stage: enable mounting stages across each other with selinux enabled
executor: Share selinux label of first stage with other stages in a build
buildkit: add from field to bind and cache mounts so images can be used as source
Use config.ProxyEnv from containers/common
use libnetwork from c/common for networking
setup the netns in the buildah parent process
build(deps): bump github.com/containerd/containerd from 1.5.8 to 1.5.9
build(deps): bump github.com/fsouza/go-dockerclient from 1.7.4 to 1.7.6
build: fix libsubid test
Allow callers to replace the ContainerSuffix
parse: allow parsing anomaly non-human value for memory control group
.cirrus: remove static_build from ci
stage_executor: re-use all possible layers from cache for squashed builds
build(deps): bump github.com/spf13/cobra from 1.2.1 to 1.3.0
Allow rootless buildah to set resource limits on cgroup V2
build(deps): bump github.com/docker/docker
tests: move buildkit mount tests files from TESTSDIR to TESTDIR before modification
build(deps): bump github.com/opencontainers/runc from 1.0.2 to 1.0.3
Wire logger through to config
copier.Put: check for is-not-a-directory using lstat, not stat
Turn on rootless cgroupv2 tests
Grab all of the containers.conf settings for namespaces.
image: set MediaType in OCI manifests
copier: RemoveAll possibly-directories
Simple README fix
images: accept multiple filter with logical AND
build(deps): bump github.com/containernetworking/cni from 0.8.1 to 1.0.1
UPdate vendor of container/storage
build(deps): bump github.com/onsi/gomega from 1.16.0 to 1.17.0
build(deps): bump github.com/containers/image/v5 from 5.16.1 to 5.17.0
Make LocalIP public function so Podman can use it
Fix UnsetEnv for buildah bud
Tests should rely only on static/unchanging images
run: ensure that stdio pipes are labeled correctly
build(deps): bump github.com/docker/docker
Cirrus: Bump up to Fedora 35 & Ubuntu 21.10
chroot: don't use the generate default seccomp filter for unit tests
build(deps): bump github.com/containerd/containerd from 1.5.7 to 1.5.8
ssh-agent: Increase timeout before we explicitly close connection
docs/tutorials: update
Clarify that manifest defaults to localhost as the registry name
"config": remove a stray bit of debug output
"commit": fix a flag typo
Fix an error message: unlocking vs locking
Expand the godoc for CommonBuildOptions.Secrets
chroot: accept an "rw" option
Add --unsetenv option to buildah commit and build
define.TempDirForURL(): show CombinedOutput when a command fails
config: support the variant field
rootless: do not bind mount /sys if not needed
Fix tutorial to specify command on buildah run line
build: history should not contain ARG values
docs: Use guaranteed path for go-md2man
run: honor --network=none from builder if nothing specified
networkpolicy: Should be enabled instead of default when explictly set
Add support for env var secret sources
build(deps): bump github.com/docker/docker
fix: another non-portable shebang
Rootless containers users should use additional groups
Support overlayfs path contains colon
Report ignorefile location when no content added
Add support for host.containers.internal in the /etc/hosts
build(deps): bump github.com/onsi/ginkgo from 1.16.4 to 1.16.5
imagebuildah: fix nil deref
buildkit: add support for mount=type=cache
Default secret mode to 400
[CI:DOCS] Include manifest example usage
docs: update buildah-from, buildah-pull 'platform' option compatibility notes
docs: update buildah-build 'platform' option compatibility notes
De-dockerize the man page as much as possible
[CI:DOCS] Touch up Containerfile man page to show ARG can be 1st
docs: Fix and Update Containerfile man page with supported mount types
mount: add tmpcopyup to tmpfs mount option
buildkit: Add support for --mount=type=tmpfs
build(deps): bump github.com/opencontainers/selinux from 1.8.5 to 1.9.1
Fix command doc links in README.md
build(deps): bump github.com/containers/image/v5 from 5.16.0 to 5.16.1
build: Add support for buildkit like --mount=type=bind
Bump containerd to v1.5.7
build(deps): bump github.com/docker/docker
tests: stop pulling php, composer
Fix .containerignore link file
Cirrus: Fix defunct package metadata breaking cache
build(deps): bump github.com/containers/storage from 1.36.0 to 1.37.0
buildah build: add --all-platforms
Add man page for Containerfile and .containerignore
Plumb the remote logger throughut Buildah
Replace fmt.Sprintf("%d", x) with strconv.Itoa(x)
Run: Cleanup run directory after every RUN step
build(deps): bump github.com/containers/common from 0.45.0 to 0.46.0
Makefile: adjust -ldflags/-gcflags/-gccgoflags depending on the go implementation
Makefile: check for `-race` using `-mod=vendor`
imagebuildah: fix an attempt to write to a nil map
push: support to specify the compression format
conformance: allow test cases to specify dockerUseBuildKit
build(deps): bump github.com/containers/common from 0.44.1 to 0.45.0
build(deps): bump github.com/containers/common from 0.44.0 to 0.44.1
unmarshalConvertedConfig(): handle zstd compression
tests/copy/copy: wire up compression options
Update to github.com/vbauerster/mpb v7.1.5
Add flouthoc to OWNERS
build: Add additional step nodes when labels are modified
Makefile: turn on race detection whenever it's available
conformance: add more tests for exclusion short-circuiting
Update VM Images + Drop prior-ubuntu testing
Bump to v1.24.0-dev

v1.23.0 (2021-09-13)

Vendor in containers/common v0.44.0
build(deps): bump github.com/containers/storage from 1.35.0 to 1.36.0
Update 05-openshift-rootless-build.md
build(deps): bump github.com/opencontainers/selinux from 1.8.4 to 1.8.5
.cirrus.yml: run cross_build_task on Big Sur
Makefile: update cross targets
Add support for rootless overlay mounts
Cirrus: Increase unit-test timeout
Docs: Clarify rmi w/ manifest/index use
build: mirror --authfile to filesystem if pointing to FD instead of file
Fix build with .git url with branch
manifest: rm should remove only manifests not referenced images.
vendor: bump c/common to v0.43.3-0.20210902095222-a7acc160fb25
Avoid rehashing and noop compression writer
corrected man page section; .conf file to mention its man page
copy: add --max-parallel-downloads to tune that copy option
copier.Get(): try to avoid descending into directories
tag: Support tagging manifest list instead of resolving to images
Install new manpages to correct sections
conformance: tighten up exception specifications
Add support for libsubid
Add epoch time field to buildah images
Fix ownership of /home/build/.local/share/containers
build(deps): bump github.com/containers/image/v5 from 5.15.2 to 5.16.0
Rename bud to build, while keeping an alias for to bud.
Replace golang.org/x/crypto/ssh/terminal with golang.org/x/term
build(deps): bump github.com/opencontainers/runc from 1.0.1 to 1.0.2
build(deps): bump github.com/onsi/gomega from 1.15.0 to 1.16.0
build(deps): bump github.com/fsouza/go-dockerclient from 1.7.3 to 1.7.4
build(deps): bump github.com/containers/common from 0.43.1 to 0.43.2
Move DiscoverContainerfile to pkg/util directory
build(deps): bump github.com/containers/image/v5 from 5.15.1 to 5.15.2
Remove some references to Docker
build(deps): bump github.com/containers/image/v5 from 5.15.0 to 5.15.1
imagebuildah: handle --manifest directly
build(deps): bump github.com/containers/common from 0.42.1 to 0.43.1
build(deps): bump github.com/opencontainers/selinux from 1.8.3 to 1.8.4
executor: make sure imageMap is updated with terminatedStage
tests/serve/serve.go: use a kernel-assigned port
Bump go for vendor-in-container from 1.13 to 1.16
imagebuildah: move multiple-platform building internal
Adds GenerateStructure helper function to support rootfs-overlay.
Run codespell to fix spelling
Implement SSH RUN mount
build(deps): bump github.com/onsi/gomega from 1.14.0 to 1.15.0
Fix resolv.conf content with run --net=private
run: fix nil deref using the option's logger
build(deps): bump github.com/containerd/containerd from 1.5.1 to 1.5.5
make vendor-in-container
bud: teach --platform to take a list
set base-image annotations
build(deps): bump github.com/opencontainers/selinux from 1.8.2 to 1.8.3
Bump to v1.23.0-dev [NO TESTS NEEDED]
Accept repositories on login/logout

v1.22.0 (2021-08-02)

c/image, c/storage, c/common vendor before Podman 3.3 release
WIP: tests: new assert()
Proposed patch for 3399 (shadowutils)
Fix handling of --restore shadow-utils
build(deps): bump github.com/containers/image/v5 from 5.13.2 to 5.14.0
runtime-flag (debug) test: handle old & new runc
build(deps): bump github.com/containers/storage from 1.32.6 to 1.33.0
Allow dst and destination for target in secret mounts
Multi-arch: Always push updated version-tagged img
Add a few tests on cgroups V2
imagebuildah.stageExecutor.prepare(): remove pseudonym check
refine dangling filter
Chown with environment variables not set should fail
Just restore protections of shadow-utils
build(deps): bump github.com/opencontainers/runc from 1.0.0 to 1.0.1
Remove specific kernel version number requirement from install.md
Multi-arch image workflow: Make steps generic
chroot: fix environment value leakage to intermediate processes
Update nix pin with `make nixpkgs`
buildah source - create and manage source images
Update cirrus-cron notification GH workflow
Reuse code from containers/common/pkg/parse
Cirrus: Freshen VM images
build(deps): bump github.com/containers/storage from 1.32.5 to 1.32.6
Fix excludes exception begining with / or ./
Fix syntax for --manifest example
build(deps): bump github.com/onsi/gomega from 1.13.0 to 1.14.0
vendor containers/common@main
Cirrus: Drop dependence on fedora-minimal
Adjust conformance-test error-message regex
Workaround appearance of differing debug messages
Cirrus: Install docker from package cache
build(deps): bump github.com/containers/ocicrypt from 1.1.1 to 1.1.2
Switch rusagelogfile to use options.Out
build(deps): bump github.com/containers/storage from 1.32.4 to 1.32.5
Turn stdio back to blocking when command finishes
Add support for default network creation
Cirrus: Updates for master->main rename
Change references from master to main
Add `--env` and `--workingdir` flags to run command
build(deps): bump github.com/opencontainers/runc
[CI:DOCS] buildah bud: spelling --ignore-file requires parameter
[CI:DOCS] push/pull: clarify supported transports
Remove unused function arguments
Create mountOptions for mount command flags
Extract version command implementation to function
Add --json flags to `mount` and `version` commands
build(deps): bump github.com/containers/storage from 1.32.2 to 1.32.3
build(deps): bump github.com/containers/common from 0.40.0 to 0.40.1
copier.Put(): set xattrs after ownership
buildah add/copy: spelling
build(deps): bump github.com/containers/common from 0.39.0 to 0.40.0
buildah copy and buildah add should support .containerignore
Remove unused util.StartsWithValidTransport
Fix documentation of the --format option of buildah push
Don't use alltransports.ParseImageName with known transports
build(deps): bump github.com/containers/image/v5 from 5.13.0 to 5.13.1
man pages: clarify `rmi` removes dangling parents
tests: make it easer to override the location of the copy helper
build(deps): bump github.com/containers/image/v5 from 5.12.0 to 5.13.0
[CI:DOCS] Fix links to c/image master branch
imagebuildah: use the specified logger for logging preprocessing warnings
Fix copy into workdir for a single file
Fix docs links due to branch rename
Update nix pin with `make nixpkgs`
build(deps): bump github.com/fsouza/go-dockerclient from 1.7.2 to 1.7.3
build(deps): bump github.com/opencontainers/selinux from 1.8.1 to 1.8.2
build(deps): bump go.etcd.io/bbolt from 1.3.5 to 1.3.6
build(deps): bump github.com/containers/storage from 1.32.1 to 1.32.2
build(deps): bump github.com/mattn/go-shellwords from 1.0.11 to 1.0.12
build(deps): bump github.com/onsi/ginkgo from 1.16.3 to 1.16.4
fix(docs): typo
Move to v1.22.0-dev
Fix handling of auth.json file while in a user namespace
Add rusage-logfile flag to optionally send rusage to a file
imagebuildah: redo step logging
build(deps): bump github.com/onsi/ginkgo from 1.16.2 to 1.16.3
build(deps): bump github.com/containers/storage from 1.32.0 to 1.32.1
Add volumes to make running buildah within a container easier
build(deps): bump github.com/onsi/gomega from 1.12.0 to 1.13.0
Add and use a "copy" helper instead of podman load/save
Bump github.com/containers/common from 0.38.4 to 0.39.0
containerImageRef/containerImageSource: don't buffer uncompressed layers
containerImageRef(): squashed images have no parent images
Sync. workflow across skopeo, buildah, and podman
Bump github.com/containers/storage from 1.31.1 to 1.31.2
Bump github.com/opencontainers/runc from 1.0.0-rc94 to 1.0.0-rc95
Bump to v1.21.1-dev [NO TESTS NEEDED]

v1.21.0 (2021-05-19)

Don't blow up if cpp detects errors
Vendor in containers/common v0.38.4
Remove 'buildah run --security-opt' from completion
update c/common
Fix handling of --default-mounts-file
update vendor of containers/storage v1.31.1
Bump github.com/containers/storage from 1.30.3 to 1.31.0
Send logrus messages back to caller when building
github: Fix bad repo. ref in workflow config
Check earlier for bad image tags name
buildah bud: fix containers/podman/issues/10307
Bump github.com/containers/storage from 1.30.1 to 1.30.3
Cirrus: Support [CI:DOCS] test skipping
Notification email for cirrus-cron build failures
Bump github.com/opencontainers/runc from 1.0.0-rc93 to 1.0.0-rc94
Fix race condition
Fix copy race while walking paths
Preserve ownership of lower directory when doing an overlay mount
Bump github.com/onsi/gomega from 1.11.0 to 1.12.0
Update nix pin with `make nixpkgs`
codespell cleanup
Multi-arch github-action workflow unification
Bump github.com/containers/image/v5 from 5.11.1 to 5.12.0
Bump github.com/onsi/ginkgo from 1.16.1 to 1.16.2
imagebuildah: ignore signatures when tagging images
update to latest libimage
Bump github.com/containers/common from 0.37.0 to 0.37.1
Bump github.com/containers/storage from 1.30.0 to 1.30.1
Upgrade to GitHub-native Dependabot
Document location of auth.json file if XDG_RUNTIME_DIR is not set
run.bats: fix flake in run-user test
Cirrus: Update F34beta -> F34
pr-should-include-tests: try to make work in buildah
runUsingRuntime: when relaying error from the runtime, mention that
Run(): avoid Mkdir() into the rootfs
imagebuildah: replace archive with chrootarchive
imagebuildah.StageExecutor.volumeCacheSaveVFS(): set up bind mounts
conformance: use :Z with transient mounts when SELinux is enabled
bud.bats: fix a bats warning
imagebuildah: create volume directories when using overlays
imagebuildah: drop resolveSymlink()
namespaces test - refactoring and cleanup
Refactor 'idmapping' system test
Cirrus: Update Ubuntu images to 21.04
Tiny fixes in bud system tests
Add compabitility wrappers for removed packages
Fix expected message at pulling image
Fix system tests of 'bud' subcommand
[CI:DOCS] Update steps for CentOS runc users
Add support for secret mounts
Add buildah manifest rm command
restore push/pull and util API
[CI:DOCS] Remove older distro docs
Rename rhel secrets to subscriptions
vendor in openshift/imagebuilder
Remove buildah bud --loglevel ...
use new containers/common/libimage package
Fix copier when using globs
Test namespace flags of 'bud' subcommand
Add system test of 'bud' subcommand
Output names of multiple tags in buildah bud
push to docker test: don't get fooled by podman
copier: add Remove()
build(deps): bump github.com/containers/image/v5 from 5.10.5 to 5.11.1
Restore log timestamps
Add system test of 'buildah help' with a tiny fix
tests: copy.bats: fix infinite hang
Do not force hard code to crun in rootless mode
build(deps): bump github.com/openshift/imagebuilder from 1.2.0 to 1.2.1
build(deps): bump github.com/containers/ocicrypt from 1.1.0 to 1.1.1
build(deps): bump github.com/containers/common from 0.35.4 to 0.36.0
Fix arg missing warning in bud
Check without flag in 'from --cgroup-parent' test
Minor fixes to Buildah as a library tutorial documentation
Add system test of 'buildah version' for packaged buildah
Add a few system tests of 'buildah from'
Log the final error with %+v at logging level "trace"
copier: add GetOptions.NoCrossDevice
Update nix pin with `make nixpkgs`
Bump to v1.20.2-dev

v1.20.1 (2021-04-13)

Run container with isolation type set at 'from'
bats helpers.bash - minor refactoring
Bump containers/storage vendor to v1.29.0
build(deps): bump github.com/onsi/ginkgo from 1.16.0 to 1.16.1
Cirrus: Update VMs w/ F34beta
CLI add/copy: add a --from option
build(deps): bump github.com/onsi/ginkgo from 1.15.2 to 1.16.0
Add authentication system tests for 'commit' and 'bud'
fix local image lookup for custom platform
Double-check existence of OCI runtimes
Cirrus: Make use of shared get_ci_vm container
Add system tests of "buildah run"
Update nix pin with `make nixpkgs`
Remove some stuttering on returns errors
Setup alias for --tty to --terminal
Add conformance tests for COPY /...
Put a few more minutes on the clock for the CI conformance test
Add a conformance test for COPY --from $symlink
Add conformance tests for COPY ""
Check for symlink in builtin volume
Sort all mounts by destination directory
System-test cleanup
Export parse.Platform string to be used by podman-remote
blobcache: fix sequencing error
build(deps): bump github.com/containers/common from 0.35.3 to 0.35.4
Fix URL in demos/buildah_multi_stage.sh
Add a few system tests
[NO TESTS NEEDED] Use --recurse-modules when building git context
Bump to v1.20.1-dev

v1.20.0 (2021-03-25)

v1.19.0 (2021-01-08)

Update vendor of containers/storage and containers/common
Buildah inspect should be able to inspect manifests
Make buildah push support pushing manifests lists and digests
Fix handling of TMPDIR environment variable
Add support for --manifest flags
Upper directory should match mode of destination directory
Only grab the OS, Arch if the user actually specified them
Use --arch and --os and --variant options to select architecture and os
Cirrus: Track libseccomp and golang version
copier.PutOptions: add an "IgnoreDevices" flag
fix: `rmi --prune` when parent image is in store.
build(deps): bump github.com/containers/storage from 1.24.3 to 1.24.4
build(deps): bump github.com/containers/common from 0.31.1 to 0.31.2
Allow users to specify stdin into containers
Drop log message on failure to mount on /sys file systems to info
SELinux no longer requires a tag.
build(deps): bump github.com/opencontainers/selinux from 1.6.0 to 1.8.0
build(deps): bump github.com/containers/common from 0.31.0 to 0.31.1
Update nix pin with `make nixpkgs`
Switch references of /var/run -> /run
Allow FROM to be overriden with from option
copier: don't assume we can chroot() on Unixy systems
copier: add PutOptions.NoOverwriteDirNonDir, Get/PutOptions.Rename
copier: handle replacing directories with not-directories
copier: Put: skip entries with zero-length names
build(deps): bump github.com/containers/storage from 1.24.2 to 1.24.3
Add U volume flag to chown source volumes
Turn off PRIOR_UBUNTU Test until vm is updated
pkg, cli: rootless uses correct isolation
build(deps): bump github.com/onsi/gomega from 1.10.3 to 1.10.4
update installation doc to reflect current status
Move away from using docker.io
enable short-name aliasing
build(deps): bump github.com/containers/storage from 1.24.1 to 1.24.2
build(deps): bump github.com/containers/common from 0.30.0 to 0.31.0
Throw errors when using bogus --network flags
pkg/supplemented test: replace our null blobinfocache
build(deps): bump github.com/containers/common from 0.29.0 to 0.30.0
inserts forgotten quotation mark
Not prefer use local image create/add manifest
Add container information to .containerenv
Add --ignorefile flag to use alternate .dockerignore flags
Add a source debug build
Fix crash on invalid filter commands
build(deps): bump github.com/containers/common from 0.27.0 to 0.29.0
Switch to using containers/common pkg's
fix: non-portable shebang #2812
Remove copy/paste errors that leaked `Podman` into man pages.
Add suggests cpp to spec file
Apply suggestions from code review
update docs for debian testing and unstable
imagebuildah: disable pseudo-terminals for RUN
Compute diffID for mapped-layer at creating image source
intermediateImageExists: ignore images whose history we can't read
Bump to v1.19.0-dev
build(deps): bump github.com/containers/common from 0.26.3 to 0.27.0

v1.18.0 (2020-11-16)

Fix testing error caused by simultanious merge
Vendor in containers/storage v1.24.0
short-names aliasing
Add --policy flag to buildah pull
Stop overwrapping and stuttering
copier.Get(): ignore ENOTSUP/ENOSYS when listing xattrs
Run: don't forcibly disable UTS namespaces in rootless mode
test: ensure non-directory in a Dockerfile path is handled correctly
Add a few tests for `pull` command
Fix buildah config --cmd to handle array
build(deps): bump github.com/containers/storage from 1.23.8 to 1.23.9
Fix NPE when Dockerfile path contains non-directory entries
Update buildah bud man page from podman build man page
Move declaration of decryption-keys to common cli
Run: correctly call copier.Mkdir
util: digging UID/GID out of os.FileInfo should work on Unix
imagebuildah.getImageTypeAndHistoryAndDiffIDs: cache results
Verify userns-uid-map and userns-gid-map input
Use CPP, CC and flags in dep check scripts
Avoid overriding LDFLAGS in Makefile
ADD: handle --chown on URLs
Update nix pin with `make nixpkgs`
(*Builder).Run: MkdirAll: handle EEXIST error
copier: try to force loading of nsswitch modules before chroot()
fix MkdirAll usage
build(deps): bump github.com/containers/common from 0.26.2 to 0.26.3
build(deps): bump github.com/containers/storage from 1.23.7 to 1.23.8
Use osusergo build tag for static build
imagebuildah: cache should take image format into account
Bump to v1.18.0-dev

v1.17.0 (2020-10-29)

Handle cases where other tools mount/unmount containers
overlay.MountReadOnly: support RO overlay mounts
overlay: use fusermount for rootless umounts
overlay: fix umount
Switch default log level of Buildah to Warn. Users need to see these messages
Drop error messages about OCI/Docker format to Warning level
build(deps): bump github.com/containers/common from 0.26.0 to 0.26.2
tests/testreport: adjust for API break in storage v1.23.6
build(deps): bump github.com/containers/storage from 1.23.5 to 1.23.7
build(deps): bump github.com/fsouza/go-dockerclient from 1.6.5 to 1.6.6
copier: put: ignore Typeflag="g"
Use curl to get repo file (fix #2714)
build(deps): bump github.com/containers/common from 0.25.0 to 0.26.0
build(deps): bump github.com/spf13/cobra from 1.0.0 to 1.1.1
Remove docs that refer to bors, since we're not using it
Buildah bud should not use stdin by default
bump containerd, docker, and golang.org/x/sys
Makefile: cross: remove windows.386 target
copier.copierHandlerPut: don't check length when there are errors
Stop excessive wrapping
CI: require that conformance tests pass
bump(github.com/openshift/imagebuilder) to v1.1.8
Skip tlsVerify insecure BUILD_REGISTRY_SOURCES
Fix build path wrong https://github.com/containers/podman/issues/7993
refactor pullpolicy to avoid deps
build(deps): bump github.com/containers/common from 0.24.0 to 0.25.0
CI: run gating tasks with a lot more memory
ADD and COPY: descend into excluded directories, sometimes
copier: add more context to a couple of error messages
copier: check an error earlier
copier: log stderr output as debug on success
Update nix pin with `make nixpkgs`
Set directory ownership when copied with ID mapping
build(deps): bump github.com/sirupsen/logrus from 1.6.0 to 1.7.0
build(deps): bump github.com/containers/common from 0.23.0 to 0.24.0
Cirrus: Remove bors artifacts
Sort build flag definitions alphabetically
ADD: only expand archives at the right time
Remove configuration for bors
Shell Completion for podman build flags
Bump c/common to v0.24.0
New CI check: xref --help vs man pages
CI: re-enable several linters
Move --userns-uid-map/--userns-gid-map  description into buildah man page
add: preserve ownerships and permissions on ADDed archives
Makefile: tweak the cross-compile target
Bump containers/common to v0.23.0
chroot: create bind mount targets 0755 instead of 0700
Change call to Split() to safer SplitN()
chroot: fix handling of errno seccomp rules
build(deps): bump github.com/containers/image/v5 from 5.5.2 to 5.6.0
Add In Progress section to contributing
integration tests: make sure tests run in ${topdir}/tests
Run(): ignore containers.conf's environment configuration
Warn when setting healthcheck in OCI format
Cirrus: Skip git-validate on branches
tools: update git-validation to the latest commit
tools: update golangci-lint to v1.18.0
Add a few tests of push command
Add(): fix handling of relative paths with no ContextDir
build(deps): bump github.com/containers/common from 0.21.0 to 0.22.0
Lint: Use same linters as podman
Validate: reference HEAD
Fix buildah mount to display container names not ids
Update nix pin with `make nixpkgs`
Add missing --format option in buildah from man page
Fix up code based on codespell
build(deps): bump github.com/openshift/imagebuilder from 1.1.6 to 1.1.7
build(deps): bump github.com/containers/storage from 1.23.4 to 1.23.5
Improve buildah completions
Cirrus: Fix validate commit epoch
Fix bash completion of manifest flags
Uniform some man pages
Update Buildah Tutorial to address BZ1867426
Update bash completion of `manifest add` sub command
copier.Get(): hard link targets shouldn't be relative paths
build(deps): bump github.com/onsi/gomega from 1.10.1 to 1.10.2
Pass timestamp down to history lines
Timestamp gets updated everytime you inspect an image
bud.bats: use absolute paths in newly-added tests
contrib/cirrus/lib.sh: don't use CN for the hostname
tests: Add some tests
Update `manifest add` man page
Extend flags of `manifest add`
build(deps): bump github.com/containers/storage from 1.23.3 to 1.23.4
build(deps): bump github.com/onsi/ginkgo from 1.14.0 to 1.14.1
Bump to v1.17.0-dev
CI: expand cross-compile checks

v1.16.0 (2020-09-03)

fix build on 32bit arches
containerImageRef.NewImageSource(): don't always force timestamps
Add fuse module warning to image readme
Heed our retry delay option values when retrying commit/pull/push
Switch to containers/common for seccomp
Use --timestamp rather then --omit-timestamp
docs: remove outdated notice
docs: remove outdated notice
build-using-dockerfile: add a hidden --log-rusage flag
build(deps): bump github.com/containers/image/v5 from 5.5.1 to 5.5.2
Discard ReportWriter if user sets options.Quiet
build(deps): bump github.com/containers/common from 0.19.0 to 0.20.3
Fix ownership of content copied using COPY --from
newTarDigester: zero out timestamps in tar headers
Update nix pin with `make nixpkgs`
bud.bats: correct .dockerignore integration tests
Use pipes for copying
run: include stdout in error message
run: use the correct error for errors.Wrapf
copier: un-export internal types
copier: add Mkdir()
in_podman: don't get tripped up by $CIRRUS_CHANGE_TITLE
docs/buildah-commit.md: tweak some wording, add a --rm example
imagebuildah: don’t blank out destination names when COPYing
Replace retry functions with common/pkg/retry
StageExecutor.historyMatches: compare timestamps using .Equal
Update vendor of containers/common
Fix errors found in coverity scan
Change namespace handling flags to better match podman commands
conformance testing: ignore buildah.BuilderIdentityAnnotation labels
Vendor in containers/storage v1.23.0
Add buildah.IsContainer interface
Avoid feeding run_buildah to pipe
fix(buildahimage): add xz dependency in buildah image
Bump github.com/containers/common from 0.15.2 to 0.18.0
Howto for rootless image building from OpenShift
Add --omit-timestamp flag to buildah bud
Update nix pin with `make nixpkgs`
Shutdown storage on failures
Handle COPY --from when an argument is used
Bump github.com/seccomp/containers-golang from 0.5.0 to 0.6.0
Cirrus: Use newly built VM images
Bump github.com/opencontainers/runc from 1.0.0-rc91 to 1.0.0-rc92
Enhance the .dockerignore man pages
conformance: add a test for COPY from subdirectory
fix  bug manifest inspct
Add documentation for .dockerignore
Add BuilderIdentityAnnotation to identify buildah version
DOC: Add quay.io/containers/buildah image to README.md
Update buildahimages readme
fix spelling mistake in "info" command result display
Don't bind /etc/host and /etc/resolv.conf if network is not present
blobcache: avoid an unnecessary NewImage()
Build static binary with `buildGoModule`
copier: split StripSetidBits into StripSetuidBit/StripSetgidBit/StripStickyBit
tarFilterer: handle multiple archives
Fix a race we hit during conformance tests
Rework conformance testing
Update 02-registries-repositories.md
test-unit: invoke cmd/buildah tests with --flags
parse: fix a type mismatch in a test
Fix compilation of tests/testreport/testreport
build.sh: log the version of Go that we're using
test-unit: increase the test timeout to 40/45 minutes
Add the "copier" package
Fix & add notes regarding problematic language in codebase
Add dependency on github.com/stretchr/testify/require
CompositeDigester: add the ability to filter tar streams
BATS tests: make more robust
vendor golang.org/x/text@v0.3.3
Switch golang 1.12 to golang 1.13
imagebuildah: wait for stages that might not have even started yet
chroot, run: not fail on bind mounts from /sys
chroot: do not use setgroups if it is blocked
Set engine env from containers.conf
imagebuildah: return the right stage's image as the "final" image
Fix a help string
Deduplicate environment variables
switch containers/libpod to containers/podman
Bump github.com/containers/ocicrypt from 1.0.2 to 1.0.3
Bump github.com/opencontainers/selinux from 1.5.2 to 1.6.0
Mask out /sys/dev to prevent information leak
linux: skip errors from the runtime kill
Mask over the /sys/fs/selinux in mask branch
Add VFS additional image store to container
tests: add auth tests
Allow "readonly" as alias to "ro" in mount options
Ignore OS X specific consistency mount option
Bump github.com/onsi/ginkgo from 1.13.0 to 1.14.0
Bump github.com/containers/common from 0.14.0 to 0.15.2
Rootless Buildah should default to IsolationOCIRootless
imagebuildah: fix inheriting multi-stage builds
Make imagebuildah.BuildOptions.Architecture/OS optional
Make imagebuildah.BuildOptions.Jobs optional
Resolve a possible race in imagebuildah.Executor.startStage()
Switch scripts to use containers.conf
Bump openshift/imagebuilder to v1.1.6
Bump go.etcd.io/bbolt from 1.3.4 to 1.3.5
buildah, bud: support --jobs=N for parallel execution
executor: refactor build code inside new function
Add bud regression tests
Cirrus: Fix missing htpasswd in registry img
docs: clarify the 'triples' format
CHANGELOG.md: Fix markdown formatting
Add nix derivation for static builds
Bump to v1.16.0-dev
version centos7 for compatible

v1.15.0 (2020-06-17)

Bump github.com/containers/common from 0.12.0 to 0.13.1
Bump github.com/containers/storage from 1.20.1 to 1.20.2
Bump github.com/seccomp/containers-golang from 0.4.1 to 0.5.0
Bump github.com/stretchr/testify from 1.6.0 to 1.6.1
Bump github.com/opencontainers/runc from 1.0.0-rc9 to 1.0.0-rc90
Add CVE-2020-10696 to CHANGELOG.md and changelog.txt
Bump github.com/stretchr/testify from 1.5.1 to 1.6.0
Bump github.com/onsi/ginkgo from 1.12.2 to 1.12.3
Vendor in containers/common v0.12.0
fix lighttpd example
Vendor in new go.etcd.io/bbolt
Bump github.com/onsi/ginkgo from 1.12.1 to 1.12.2
Bump imagebuilder for ARG fix
Bump github.com/containers/common from 0.11.2 to 0.11.4
remove dependency on openshift struct
Warn on unset build arguments
vendor: update seccomp/containers-golang to v0.4.1
Ammended docs
Updated docs
clean up comments
update exit code for tests
Implement commit for encryption
implementation of encrypt/decrypt push/pull/bud/from
fix resolve docker image name as transport
Bump github.com/opencontainers/go-digest from 1.0.0-rc1 to 1.0.0
Bump github.com/onsi/ginkgo from 1.12.0 to 1.12.1
Bump github.com/containers/storage from 1.19.1 to 1.19.2
Bump github.com/containers/image/v5 from 5.4.3 to 5.4.4
Add preliminary profiling support to the CLI
Bump github.com/containers/common from 0.10.0 to 0.11.2
Evaluate symlinks in build context directory
fix error info about get signatures for containerImageSource
Add Security Policy
Cirrus: Fixes from review feedback
Bump github.com/containers/storage from 1.19.0 to 1.19.1
Bump github.com/sirupsen/logrus from 1.5.0 to 1.6.0
imagebuildah: stages shouldn't count as their base images
Update containers/common v0.10.0
Bump github.com/fsouza/go-dockerclient from 1.6.4 to 1.6.5
Add registry to buildahimage Dockerfiles
Cirrus: Use pre-installed VM packages + F32
Cirrus: Re-enable all distro versions
Cirrus: Update to F31 + Use cache images
golangci-lint: Disable gosimple
Lower number of golangci-lint threads
Fix permissions on containers.conf
Don't force tests to use runc
Bump github.com/containers/common from 0.9.1 to 0.9.5
Return exit code from failed containers
Bump github.com/containers/storage from 1.18.2 to 1.19.0
Bump github.com/containers/common from 0.9.0 to 0.9.1
cgroup_manager should be under [engine]
Use c/common/pkg/auth in login/logout
Cirrus: Temporarily disable Ubuntu 19 testing
Add containers.conf to stablebyhand build
Update gitignore to exclude test Dockerfiles
Bump github.com/fsouza/go-dockerclient from 1.6.3 to 1.6.4
Bump github.com/containers/common from 0.8.1 to 0.9.0
Bump back to v1.15.0-dev
Remove warning for systemd inside of container

v1.14.8 (2020-04-09)

Run (make vendor)
Run (make -C tests/tools vendor)
Run (go mod tidy) before (go mod vendor) again
Fix (make vendor)
Bump validation
Bump back to v1.15.0-dev

v1.14.7 (2020-04-07)

Bump github.com/containers/image/v5 from 5.3.1 to 5.4.3
make vendor: run `tidy` after `vendor`
Do not skip the directory when the ignore pattern matches
Bump github.com/containers/common from 0.7.0 to 0.8.1
Downgrade siruspen/logrus from 1.4.2
Fix errorf conventions
dockerignore tests : remove symlinks, rework
Bump back to v1.15.0-dev

v1.14.6 (2020-04-02)

bud.bats - cleanup, refactoring
vendor in latest containers/storage 1.18.0 and containers/common v0.7.0
Bump github.com/spf13/cobra from 0.0.6 to 0.0.7
Bump github.com/containers/storage from 1.16.5 to 1.17.0
Bump github.com/containers/image/v5 from 5.2.1 to 5.3.1
Fix Amazon install step
Bump back to v1.15.0-dev
Fix bud-build-arg-cache test
Make image history work correctly with new args handling
Don't add args to the RUN environment from the Builder
Update github.com/openshift/imagebuilder to v1.1.4
Add .swp files to .gitignore

v1.14.5 (2020-03-26)

revert #2246 FIPS mode change
Bump back to v1.15.0-dev
image with dup layers: we now have one on quay
digest test : make more robust

v1.14.4 (2020-03-25)

Fix fips-mode check for RHEL8 boxes
Fix potential CVE in tarfile w/ symlink (Edit 02-Jun-2020: Addresses CVE-2020-10696)
Fix .dockerignore with globs and ! commands
update install steps for Amazon Linux 2
Bump github.com/openshift/imagebuilder from 1.1.2 to 1.1.3
Add comment for RUN command in volume ownership test
Run stat command directly for volume ownership test
vendor in containers/common v0.6.1
Cleanup go.sum
Bump back to v1.15.0-dev

v1.14.3 (2020-03-17)

Update containers/storage to v1.16.5
Bump github.com/containers/storage from 1.16.2 to 1.16.4
Bump github.com/openshift/imagebuilder from 1.1.1 to 1.1.2
Update github.com/openshift/imagebuilder vendoring
Update unshare man page to fix script example
Fix compilation errors on non linux platforms
Bump containers/common and opencontainers/selinux versions
Add tests for volume ownership
Preserve volume uid and gid through subsequent commands
Fix FORWARD_NULL errors found by Coverity
Bump github.com/containers/storage from 1.16.1 to 1.16.2
Fix errors found by codespell
Bump back to v1.15.0-dev
Add Pull Request Template

v1.14.2 (2020-03-03)

Add Buildah pull request template
Bump to containers/storage v1.16.1
run_linux: fix tight loop if file is not pollable
Bump github.com/opencontainers/selinux from 1.3.2 to 1.3.3
Bump github.com/containers/common from 0.4.1 to 0.4.2
Bump back to v1.15.0-dev
Add Containerfile to build a versioned stable image on quay.io

v1.14.1 (2020-02-27)

Search for local runtime per values in containers.conf
Set correct ownership on working directory
BATS : in teardown, umount stale mounts
Bump github.com/spf13/cobra from 0.0.5 to 0.0.6
Bump github.com/fsouza/go-dockerclient from 1.6.1 to 1.6.3
Bump github.com/stretchr/testify from 1.4.0 to 1.5.1
Replace unix with syscall to allow vendoring into libpod
Update to containers/common v0.4.1
Improve remote manifest retrieval
Fix minor spelling errors in containertools README
Clear the right variable in buildahimage
Correct a couple of incorrect format specifiers
Update to containers/common v0.3.0
manifest push --format: force an image type, not a list type
run: adjust the order in which elements are added to $PATH
getDateAndDigestAndSize(): handle creation time not being set
Bump github.com/containers/common from 0.2.0 to 0.2.1
include installation steps for CentOS 8 and Stream
include installation steps for CentOS7 and forks
Adjust Ubuntu install info to also work on Pop!_OS
Make the commit id clear like Docker
Show error on copied file above context directory in build
Bump github.com/containers/image/v5 from 5.2.0 to 5.2.1
pull/from/commit/push: retry on most failures
Makefile: fix install.cni.sudo
Repair buildah so it can use containers.conf on the server side
Bump github.com/mattn/go-shellwords from 1.0.9 to 1.0.10
Bump github.com/fsouza/go-dockerclient from 1.6.0 to 1.6.1
Fixing formatting & build instructions
Add Code of Conduct
Bors: Fix no. req. github reviews
Cirrus+Bors: Simplify temp branch skipping
Bors-ng: Add documentation and status-icon
Bump github.com/onsi/ginkgo from 1.11.0 to 1.12.0
fix XDG_RUNTIME_DIR for authfile
Cirrus: Disable F29 testing
Cirrus: Add jq package
Cirrus: Fix lint + validation using wrong epoch
Stop using fedorproject registry
Bors: Workaround ineffective required statuses
Bors: Enable app + Disable Travis
Cirrus: Add standardized log-collection
Cirrus: Improve automated lint + validation
Allow passing options to golangci-lint
Cirrus: Fixes from review feedback
Cirrus: Temporarily ignore VM testing failures
Cirrus: Migrate off papr + implement VM testing
Cirrus: Update packages + fixes for get_ci_vm.sh
Show validation command-line
Skip overlay test w/ vfs driver
use alpine, not centos, for various tests
Flake handling: cache and prefetch images
Bump to v1.15.0-dev

v1.14.0 (2020-02-05)

bump github.com/mtrmac/gpgme
Update containers/common to v0.1.4
manifest push: add --format option
Bump github.com/onsi/gomega from 1.8.1 to 1.9.0
vendor github.com/containers/image/v5@v5.2.0
info test: deal with random key order
Bump back to v1.14.0-dev

v1.13.2 (2020-01-29)

sign.bats: set GPG_TTY=/dev/null
Fix parse_unsupported.go
getDateAndDigestAndSize(): use manifest.Digest
Bump github.com/opencontainers/selinux from 1.3.0 to 1.3.1
Bump github.com/containers/common from 0.1.0 to 0.1.2
Touch up os/arch doc
chroot: handle slightly broken seccomp defaults
buildahimage: specify fuse-overlayfs mount options
Bump github.com/mattn/go-shellwords from 1.0.7 to 1.0.9
copy.bats: make sure we detect failures due to missing source
parse: don't complain about not being able to rename something to itself
Makefile: use a $(GO_TEST) macro, fix a typo
manifests: unit test fix
Fix build for 32bit platforms
Allow users to set OS and architecture on bud
Fix COPY in containerfile with envvar
Bump c/storage to v1.15.7
add --sign-by to bud/commit/push, --remove-signatures for pull/push
Remove cut/paste error in CHANGELOG.md
Update vendor of containers/common to v0.1.0
update install instructions for Debian, Raspbian and Ubuntu
Add support for containers.conf
Bump back to v1.14.0-dev

v1.13.1 (2020-01-14)

Bump github.com/containers/common from 0.0.5 to 0.0.7
Bump github.com/onsi/ginkgo from 1.10.3 to 1.11.0
Bump github.com/pkg/errors from 0.8.1 to 0.9.0
Bump github.com/onsi/gomega from 1.7.1 to 1.8.1
Add codespell support
copyFileWithTar: close source files at the right time
copy: don't digest files that we ignore
Check for .dockerignore specifically
Travis: rm go 1.12.x
Don't setup excludes, if their is only one pattern to match
set HOME env to /root on chroot-isolation by default
docs: fix references to containers-*.5
update openshift/api
fix bug Add check .dockerignore COPY file
buildah bud --volume: run from tmpdir, not source dir
Fix imageNamePrefix to give consistent names in buildah-from
cpp: use -traditional and -undef flags
Fix image reference in tutorial 4
discard outputs coming from onbuild command on buildah-from --quiet
make --format columnizing consistent with buildah images
Bump to v1.14.0-dev

v1.13.0 (2019-12-27)

Bump to c/storage v1.15.5
Update container/storage to v1.15.4
Fix option handling for volumes in build
Rework overlay pkg for use with libpod
Fix buildahimage builds for buildah
Add support for FIPS-Mode backends
Set the TMPDIR for pulling/pushing image to $TMPDIR
WIP: safer test for pull --all-tags
BATS major cleanup: blobcache.bats: refactor
BATS major cleanup: part 4: manual stuff
BATS major cleanup, step 3: yet more run_buildah
BATS major cleanup, part 2: use more run_buildah
BATS major cleanup, part 1: log-level
Bump github.com/containers/image/v5 from 5.0.0 to 5.1.0
Bump github.com/containers/common from 0.0.3 to 0.0.5
Bump to v1.13.0-dev

v1.12.0 (2019-12-13)

Allow ADD to use http src
Bump to c/storage v.1.15.3
install.md: update golang dependency
imgtype: reset storage opts if driver overridden
Start using containers/common
overlay.bats typo: fuse-overlays should be fuse-overlayfs
chroot: Unmount with MNT_DETACH instead of UnmountMountpoints()
bind: don't complain about missing mountpoints
imgtype: check earlier for expected manifest type
Vendor containers/storage fix
Vendor containers/storage v1.15.1
Add history names support
PR takeover of #1966
Tests: Add inspect test check steps
Tests: Add container name and id check in containers test steps
Test: Get permission in add test
Tests: Add a test for tag by id
Tests: Add test cases for push test
Tests: Add image digest test
Tests: Add some buildah from tests
Tests: Add two commit test
Tests: Add buildah bud with --quiet test
Tests: Add two test for buildah add
Bump back to v1.12.0-dev

v1.11.6 (2019-12-03)

Handle missing equal sign in --from and --chown flags for COPY/ADD
bud COPY does not download URL
Bump github.com/onsi/gomega from 1.7.0 to 1.7.1
Fix .dockerignore exclude regression
Ran buildah through codespell
commit(docker): always set ContainerID and ContainerConfig
Touch up commit man page image parameter
Add builder identity annotations.
info: use util.Runtime()
Bump github.com/onsi/ginkgo from 1.10.2 to 1.10.3
Bump back to v1.12.0-dev

v1.11.5 (2019-11-11)

Enhance error on unsafe symbolic link targets
Add OCIRuntime to info
Check nonexsit authfile
Only output image id if running buildah bud --quiet
Fix --pull=true||false and add --pull-never to bud and from (retry)
cgroups v2: tweak or skip tests
Prepwork: new 'skip' helpers for tests
Handle configuration blobs for manifest lists
unmarshalConvertedConfig: avoid using the updated image's ref
Add completions for Manifest commands
Add disableFips option to secrets pkg
Update bud.bats test archive test
Add test for caching based on content digest
Builder.untarPath(): always evaluate b.ContentDigester.Hash()
Bump github.com/onsi/ginkgo from 1.10.1 to 1.10.2
Fix another broken test: copy-url-mtime
yet more fixes
Actual bug fix for 'add' test: fix the expected mode
BATS tests - lots of mostly minor cleanup
build: drop support for ostree
Add support for make vendor-in-container
imgtype: exit with error if storage fails
remove XDG_RUNTIME_DIR from default authfile path
fix troubleshooting redirect instructions
Bump back to v1.12.0-dev

v1.11.4 (2019-10-28)

buildah: add a "manifest" command
manifests: add the module
pkg/supplemented: add a package for grouping images together
pkg/manifests: add a manifest list build/manipulation API
Update for ErrUnauthorizedForCredentials API change in containers/image
Update for manifest-lists API changes in containers/image
version: also note the version of containers/image
Move to containers/image v5.0.0
Enable --device directory as src device
Fix git build with branch specified
Bump github.com/openshift/imagebuilder from 1.1.0 to 1.1.1
Bump github.com/fsouza/go-dockerclient from 1.4.4 to 1.5.0
Add clarification to the Tutorial for new users
Silence "using cache" to ensure -q is fully quiet
Add OWNERS File to Buildah
Bump github.com/containers/storage from 1.13.4 to 1.13.5
Move runtime flag to bud from common
Commit: check for storage.ErrImageUnknown using errors.Cause()
Fix crash when invalid COPY --from flag is specified.
Bump back to v1.12.0-dev

v1.11.3 (2019-10-04)

Update c/image to v4.0.1
Bump github.com/spf13/pflag from 1.0.3 to 1.0.5
Fix --build-args handling
Bump github.com/spf13/cobra from 0.0.3 to 0.0.5
Bump github.com/cyphar/filepath-securejoin from 0.2.1 to 0.2.2
Bump github.com/onsi/ginkgo from 1.8.0 to 1.10.1
Bump github.com/fsouza/go-dockerclient from 1.3.0 to 1.4.4
Add support for retrieving context from stdin "-"
Ensure bud remote context cleans up on error
info: add cgroups2
Bump github.com/seccomp/libseccomp-golang from 0.9.0 to 0.9.1
Bump github.com/mattn/go-shellwords from 1.0.5 to 1.0.6
Bump github.com/stretchr/testify from 1.3.0 to 1.4.0
Bump github.com/opencontainers/selinux from 1.2.2 to 1.3.0
Bump github.com/etcd-io/bbolt from 1.3.2 to 1.3.3
Bump github.com/onsi/gomega from 1.5.0 to 1.7.0
update c/storage to v1.13.4
Print build 'STEP' line to stdout, not stderr
Fix travis-ci on forks
Vendor c/storage v1.13.3
Use Containerfile by default
Added tutorial on how to include Buildah as library
util/util: Fix "configuraitno" -> "configuration" log typo
Bump back to v1.12.0-dev

v1.11.2 (2019-09-13)

Add some cleanup code
Move devices code to unit specific directory.
Bump back to v1.12.0-dev

v1.11.1 (2019-09-11)

Add --devices flag to bud and from
Downgrade .papr to highest atomic verion
Add support for /run/.containerenv
Truncate output of too long image names
Preserve file and directory mount permissions
Bump fedora version from 28 to 30
makeImageRef: ignore EmptyLayer if Squash is set
Set TMPDIR to /var/tmp by default
replace --debug=false with --log-level=error
Allow mounts.conf entries for equal source and destination paths
fix label and annotation for 1-line Dockerfiles
Enable interfacer linter and fix lints
install.md: mention goproxy
Makefile: use go proxy
Bump to v1.12.0-dev

v1.11.0 (2019-08-29)

tests/bud.bats: add --signature-policy to some tests
Vendor github.com/openshift/api
pull/commit/push: pay attention to $BUILD_REGISTRY_SOURCES
Add `--log-level` command line option and deprecate `--debug`
add support for cgroupsV2
Correctly detect ExitError values from Run()
Disable empty logrus timestamps to reduce logger noise
Remove outdated deps Makefile target
Remove gofmt.sh in favor of golangci-lint
Remove govet.sh in favor of golangci-lint
Allow to override build date with SOURCE_DATE_EPOCH
Update shebangs to take env into consideration
Fix directory pull image names
Add --digestfile and Re-add push statement as debug
README: mention that Podman uses Buildah's API
Use content digests in ADD/COPY history entries
add: add a DryRun flag to AddAndCopyOptions
Fix possible runtime panic on bud
Add security-related volume options to validator
use correct path for ginkgo
Add bud 'without arguments' integration tests
Update documentation about bud
add: handle hard links when copying with .dockerignore
add: teach copyFileWithTar() about symlinks and directories
Allow buildah bud to be called without arguments
imagebuilder: fix detection of referenced stage roots
Touch up go mod instructions in install
run_linux: fix mounting /sys in a userns
Vendor Storage v1.13.2
Cirrus: Update VM images
Fix handling of /dev/null masked devices
Update `bud`/`from` help to contain indicator for `--dns=none`
Bump back to v1.11.0-dev

v1.10.1 (2019-08-08)

Bump containers/image to v3.0.2 to fix keyring issue
Bug fix for volume minus syntax
Bump container/storage v1.13.1 and containers/image v3.0.1
bump github.com/containernetworking/cni to v0.7.1
Add overlayfs to fuse-overlayfs tip
Add automatic apparmor tag discovery
Fix bug whereby --get-login has no effect
Bump to v1.11.0-dev

v1.10.0 (2019-08-02)

vendor github.com/containers/image@v3.0.0
Remove GO111MODULE in favor of `-mod=vendor`
Vendor in containers/storage v1.12.16
Add '-' minus syntax for removal of config values
tests: enable overlay tests for rootless
rootless, overlay: use fuse-overlayfs
vendor github.com/containers/image@v2.0.1
Added '-' syntax to remove volume config option
delete `successfully pushed` message
Add golint linter and apply fixes
vendor github.com/containers/storage@v1.12.15
Change wait to sleep in buildahimage readme
Handle ReadOnly images when deleting images
Add support for listing read/only images

v1.9.2 (2019-07-19)

from/import: record the base image's digest, if it has one
Fix CNI version retrieval to not require network connection
Add misspell linter and apply fixes
Add goimports linter and apply fixes
Add stylecheck linter and apply fixes
Add unconvert linter and apply fixes
image: make sure we don't try to use zstd compression
run.bats: skip the "z" flag when testing --mount
Update to runc v1.0.0-rc8
Update to match updated runtime-tools API
bump github.com/opencontainers/runtime-tools to v0.9.0
Build e2e tests using the proper build tags
Add unparam linter and apply fixes
Run: correct a typo in the --cap-add help text
unshare: add a --mount flag
fix push check image name is not empty
Bump to v1.9.2-dev

v1.9.1 (2019-07-12)

add: fix slow copy with no excludes
Add errcheck linter and fix missing error check
Improve tests/tools/Makefile parallelism and abstraction
Fix response body not closed resource leak
Switch to golangci-lint
Add gomod instructions and mailing list links
On Masked path, check if /dev/null already mounted before mounting
Update to containers/storage v1.12.13
Refactor code in package imagebuildah
Add rootless podman with NFS issue in documentation
Add --mount  for buildah run
import method ValidateVolumeOpts from libpod
Fix typo
Makefile: set GO111MODULE=off
rootless: add the built-in slirp DNS server
Update docker/libnetwork to get rid of outdated sctp package
Update buildah-login.md
migrate to go modules
install.md: mention go modules
tests/tools: go module for test binaries
fix --volume splits comma delimited option
Add bud test for RUN with a priv'd command
vendor logrus v1.4.2
pkg/cli: panic when flags can't be hidden
pkg/unshare: check all errors
pull: check error during report write
run_linux.go: ignore unchecked errors
conformance test: catch copy error
chroot/run_test.go: export funcs to actually be executed
tests/imgtype: ignore error when shutting down the store
testreport: check json error
bind/util.go: remove unused func
rm chroot/util.go
imagebuildah: remove unused `dedupeStringSlice`
StageExecutor: EnsureContainerPath: catch error from SecureJoin()
imagebuildah/build.go: return <expr> instead of branching
rmi: avoid redundant branching
conformance tests: nilness: allocate map
imagebuildah/build.go: avoid redundant `filepath.Join()`
imagebuildah/build.go: avoid redundant `os.Stat()`
imagebuildah: omit comparison to bool
fix "ineffectual assignment" lint errors
docker: ignore "repeats json tag" lint error
pkg/unshare: use `...` instead of iterating a slice
conformance: bud test: use raw strings for regexes
conformance suite: remove unused func/var
buildah test suite: remove unused vars/funcs
testreport: fix golangci-lint errors
util: remove redundant `return` statement
chroot: only log clean-up errors
images_test: ignore golangci-lint error
blobcache: log error when draining the pipe
imagebuildah: check errors in deferred calls
chroot: fix error handling in deferred funcs
cmd: check all errors
chroot/run_test.go: check errors
chroot/run.go: check errors in deferred calls
imagebuildah.Executor: remove unused onbuild field
docker/types.go: remove unused struct fields
util: use strings.ContainsRune instead of index check
Cirrus: Initial implementation
Bump to v1.9.1-dev

v1.9.0 (2019-06-15)

buildah-run: fix-out-of-range panic (2)
Bump back to v1.9.0-dev

v1.8.4 (2019-06-13)

Update containers/image to v2.0.0
run: fix hang with run and --isolation=chroot
run: fix hang when using run
chroot: drop unused function call
remove --> before imgageID on build
Always close stdin pipe
Write deny to setgroups when doing single user mapping
Avoid including linux/memfd.h
Add a test for the symlink pointing to a directory
Add missing continue
Fix the handling of symlinks to absolute paths
Only set default network sysctls if not rootless
Support --dns=none like podman
fix bug --cpu-shares parsing typo
Fix validate complaint
Update vendor on containers/storage to v1.12.10
Create directory paths for COPY thereby ensuring correct perms
imagebuildah: use a stable sort for comparing build args
imagebuildah: tighten up cache checking
bud.bats: add a test verying the order of --build-args
add -t to podman run
imagebuildah: simplify screening by top layers
imagebuildah: handle ID mappings for COPY --from
imagebuildah: apply additionalTags ourselves
bud.bats: test additional tags with cached images
bud.bats: add a test for WORKDIR and COPY with absolute destinations
Cleanup Overlay Mounts content

v1.8.3 (2019-06-04)

Add support for file secret mounts
Add ability to skip secrets in mounts file
allow 32bit builds
fix tutorial instructions
imagebuilder: pass the right contextDir to Add()
add: use fileutils.PatternMatcher for .dockerignore
bud.bats: add another .dockerignore test
unshare: fallback to single usermapping
addHelperSymlink: clear the destination on os.IsExist errors
bud.bats: test replacing symbolic links
imagebuildah: fix handling of destinations that end with '/'
bud.bats: test COPY with a final "/" in the destination
linux: add check for sysctl before using it
Rework buildahimamges
build context: support https git repos
Add a test for ENV special chars behaviour
Check in new Dockerfiles
Apply custom SHELL during build time
config: expand variables only at the command line
SetEnv: we only need to expand v once
Add default /root if empty on chroot iso
Add support for Overlay volumes into the container.
Export buildah validate volume functions so it can share code with libpod
Bump baseline test to F30
Fix rootless handling of /dev/shm size
Avoid fmt.Printf() in the library
imagebuildah: tighten cache checking back up
Handle WORKDIR with dangling target
Default Authfile to proper path
Make buildah run --isolation follow BUILDAH_ISOLATION environment
Vendor in latest containers/storage and containers/image
getParent/getChildren: handle layerless images
imagebuildah: recognize cache images for layerless images
bud.bats: test scratch images with --layers caching
Get CHANGELOG.md updates
Add some symlinks to test our .dockerignore logic
imagebuildah: addHelper: handle symbolic links
commit/push: use an everything-allowed policy
Correct manpage formatting in files section
Remove must be root statement from buildah doc
Change image names to stable, testing and upstream
Bump back to v1.9.0-dev

v1.8.2 (2019-05-02)

Vendor Storage 1.12.6
Create scratch file in TESTDIR
Test bud-copy-dot with --layers picks up changed file
Bump back to 1.9.0-dev

v1.8.1 (2019-05-01)

Don't create directory on container
Replace kubernetes/pause in tests with k8s.gcr.io/pause
imagebuildah: don't remove intermediate images if we need them
Rework buildahimagegit to buildahimageupstream
Fix Transient Mounts
Handle WORKDIRs that are symlinks
allow podman to build a client for windows
Touch up 1.9-dev to 1.9.0-dev
Bump to 1.9-dev

v1.8.0 (2019-04-26)

Resolve symlink when checking container path
commit: commit on every instruction, but not always with layers
CommitOptions: drop the unused OnBuild field
makeImageRef: pass in the whole CommitOptions structure
cmd: API cleanup: stores before images
run: check if SELinux is enabled
Fix buildahimages Dockerfiles to include support for additionalimages mounted from host.
Detect changes in rootdir
Fix typo in buildah-pull(1)
Vendor in latest containers/storage
Keep track of any build-args used during buildah bud --layers
commit: always set a parent ID
imagebuildah: rework unused-argument detection
fix bug dest path when COPY .dockerignore
Move Host IDMAppings code from util to unshare
Add BUILDAH_ISOLATION rootless back
Travis CI: fail fast, upon error in any step
imagebuildah: only commit images for intermediate stages if we have to
Use errors.Cause() when checking for IsNotExist errors
auto pass http_proxy to container
Bump back to 1.8-dev

v1.7.3 (2019-04-16)

imagebuildah: don't leak image structs
Add Dockerfiles for buildahimages
Bump to Replace golang 1.10 with 1.12
add --dns* flags to buildah bud
Add hack/build_speed.sh test speeds on building container images
Create buildahimage Dockerfile for Quay
rename 'is' to 'expect_output'
squash.bats: test squashing in multi-layered builds
bud.bats: test COPY --from in a Dockerfile while using the cache
commit: make target image names optional
Fix bud-args to allow comma separation
oops, missed some tests in commit.bats
new helper: expect_line_count
New tests for #1467 (string slices in cmdline opts)
Workarounds for dealing with travis; review feedback
BATS tests - extensive but minor cleanup
imagebuildah: defer pulling images for COPY --from
imagebuildah: centralize COMMIT and image ID output
Travis: do not use traviswait
imagebuildah: only initialize imagebuilder configuration once per stage
Make cleaner error on Dockerfile build errors
unshare: move to pkg/
unshare: move some code from cmd/buildah/unshare
Fix handling of Slices versus Arrays
imagebuildah: reorganize stage and per-stage logic
imagebuildah: add empty layers for instructions
Add missing step in installing into Ubuntu
fix bug in .dockerignore support
imagebuildah: deduplicate prepended "FROM" instructions
Touch up intro
commit: set created-by to the shell if it isn't set
commit: check that we always set a "created-by"
docs/buildah.md: add "containers-" prefixes under "SEE ALSO"
Bump back to 1.8-dev

v1.7.2 (2019-03-28)

mount: do not create automatically a namespace
buildah: correctly create the userns if euid!=0
imagebuildah.Build: consolidate cleanup logic
CommitOptions: drop the redundant Store field
Move pkg/chrootuser from libpod to buildah.
imagebuildah: record image IDs and references more often
vendor imagebuilder v1.1.0
imagebuildah: fix requiresStart/noRunsRemaining confusion
imagebuildah: check for unused args across stages
bump github.com/containernetworking/cni to v0.7.0-rc2
imagebuildah: use "useCache" instead of "noCache"
imagebuildah.resolveNameToImageRef(): take name as a parameter
Export fields of the DokcerIgnore struct
imagebuildah: drop the duplicate containerIDs list
rootless: by default use the host network namespace
imagebuildah: split Executor and per-stage execution
imagebuildah: move some fields around
golint: make golint happy
docs: 01-intro.md: add missing . in Dockerfile examples
fix bug using .dockerignore
Do not create empty mounts.conf file
images: suppress a spurious blank line with no images
from: distinguish between ADD and COPY
fix bug to not separate each --label value with comma
buildah-bud.md: correct a typo, note a default
Remove mistaken code that got merged in other PR
add sample registries.conf to docs
escape shell variables in README example
slirp4netns: set mtu to 65520
images: imageReposToMap() already adds <none>:<none>
imagebuildah.ReposToMap: move to cmd
Build: resolve copyFrom references earlier
Allow rootless users to use the cache directory in homedir
bud.bats: use the per-test temp directory
bud.bats: log output before counting length
Simplify checks for leftover args
Print commitID with --layers
fix bug images use the template to print results
rootless: honor --net host
onsi/gomeage add missing files
vendor latest openshift/imagebuilder
Remove noop from squash help
Prepend a comment to files setup in container
imagebuildah resolveSymlink: fix handling of relative links
Errors should be printed to stderr
Add recommends for slirp4netns and fuse-overlay
Update pull and pull-always flags
Hide from users command options that we don't want them to use.
Update secrets fipsmode patch to work on rootless containers
fix unshare option handling and documentation
Vendor in latest containers/storage
Hard-code docker.Transport use in pull --all-tags
Use a types.ImageReference instead of (transport, name) strings in pullImage etc.
Move the computation of srcRef before first pullAndFindImage
Don't throw away user-specified tag for pull --all-tags
CHANGES BEHAVIOR: Remove the string format input to localImageNameForReference
Don't try to parse imageName as transport:image in pullImage
Use reference.WithTag instead of manual string manipulation in Pull
Don't pass image = transport:repo:tag, transport=transport to pullImage
Fix confusing variable naming in Pull
Don't try to parse image name as a transport:image
Fix error reporting when parsing trans+image
Remove 'transport == ""' handling from the pull path
Clean up "pulls" of local image IDs / ID prefixes
Simplify ExpandNames
Document the semantics of transport+name returned by ResolveName
UPdate gitvalidation epoch
Bump back to 1.8-dev

v1.7.1 (2019-02-26)

vendor containers/image v1.5
Move secrets code from libpod into buildah
Update CHANGELOG.md with the past changes
README.md: fix typo
Fix a few issues found by tests/validate/gometalinter.sh
Neutralize buildah/unshare on non-Linux platforms
Explicitly specify a directory to find(1)
README.md: rephrase Buildah description
Stop printing default twice in cli --help
install.md: add section about vendoring
Bump to 1.8-dev

v1.7 (2019-02-21)

vendor containers/image v1.4
Make "images --all" faster
Remove a misleading comment
Remove quiet option from pull options
Make sure buildah pull --all-tags only works with docker transport
Support oci layout format
Fix pulling of images within buildah
Fix tls-verify polarity
Travis: execute make vendor and hack/tree_status.sh
vendor.conf: remove unused dependencies
add missing vendor/github.com/containers/libpod/vendor.conf
vendor.conf: remove github.com/inconshreveable/mousetrap
make vendor: always fetch the latest vndr
add hack/tree_status.sh script
Bump c/Storage to 1.10
Add --all-tags test to pull
mount: make error clearer
Remove global flags from cli help
Set --disable-compression to true as documented
Help document using buildah mount in rootless mode
healthcheck start-period: update documentation
Vendor in latest c/storage and c/image
dumpbolt: handle nested buckets
Fix buildah commit compress by default
Test on xenial, not trusty
unshare: reexec using a memfd copy instead of the binary
Add --target to bud command
Fix example for setting multiple environment variables
main: fix rootless mode
buildah: force umask 022
pull.bats: specify registry config when using registries
pull.bats: use the temporary directory, not /tmp
unshare: do not set rootless mode if euid=0
Touch up cli help examples and a few nits
Add an undocumented dumpbolt command
Move tar commands into containers/storage
Fix bud issue with 2 line Dockerfile
Add package install descriptions
Note configuration file requirements
Replace urfave/cli with cobra
cleanup vendor.conf
Vendor in latest containers/storage
Add Quiet to PullOptions and PushOptions
cmd/commit: add flag omit-timestamp to allow for deterministic builds
Add options for empty-layer history entries
Make CLI help descriptions and usage a bit more consistent
vndr opencontainers/selinux
Bump baseline test Fedora to 29
Bump to v1.7-dev-1
Bump to v1.6-1
Add support for ADD --chown
imagebuildah: make EnsureContainerPath() check/create the right one
Bump 1.7-dev
Fix contrib/rpm/bulidah.spec changelog date

v1.6-1 (2019-01-18)

Add support for ADD --chown
imagebuildah: make EnsureContainerPath() check/create the right one
Fix contrib/rpm/bulidah.spec changelog date
Vendor in latest containers/storage
Revendor everything
Revendor in latest code by release
unshare: do not set USER=root
run: ignore EIO when flushing at the end, avoid double log
build-using-dockerfile,commit: disable compression by default
Update some comments
Make rootless work under no_pivot_root
Add CreatedAtRaw date field for use with Format
Properly format images JSON output
pull: add all-tags option
Fix support for multiple Short options
pkg/blobcache: add synchronization
Skip empty files in file check of conformance test
Use NoPivot also for RUN, not only for run
Remove no longer used isReferenceInsecure / isRegistryInsecure
Do not set OCIInsecureSkipTLSVerify based on registries.conf
Remove duplicate entries from images JSON output
vendor parallel-copy from containers/image
blobcache.bats: adjust explicit push tests
Handle one line Dockerfile with layers
We should only warn if user actually requests Hostname be set in image
Fix compiler Warning about comparing different size types
imagebuildah: don't walk if rootdir and path are equal
Add aliases for buildah containers, so buildah list, ls and ps work
vendor: use faster version instead compress/gzip
vendor: update libpod
Properly handle Hostname inside of RUN command
docs: mention how to mount in rootless mode
tests: use fully qualified name for centos image
travis.yml: use the fully qualified name for alpine
mount: allow mount only when using vfs
Add some tests for buildah pull
Touch up images -q processing
Refactor: Use library shared idtools.ParseIDMap() instead of bundling it
cli.BudFlags: add `--platform` nop
Makefile: allow packagers to more easily add tags
Makefile: soften the requirement on git
tests: add containers json test
Inline blobCache.putBlob into blobCacheDestination.PutBlob
Move saveStream and putBlob near blobCacheDestination.PutBlob
Remove BlobCache.PutBlob
Update for API changes
Vendor c/image after merging c/image#536
Handle 'COPY --from' in Dockerfile
Vendor in latest content from github.com/containers/storage
Clarify docker.io default in push with docker-daemon
Test blob caching
Wire in a hidden --blob-cache option
Use a blob cache when we're asked to use one
Add --disable-compression to 'build-using-dockerfile'
Add a blob cache implementation
vendor: update containers/storage
Update for sysregistriesv2 API changes
Update containers/image to 63a1cbdc5e6537056695cf0d627c0a33b334df53
clean up makefile variables
Fix file permission
Complete the instructions for the command
Show warning when a build arg not used
Assume user 0 group 0, if /etc/passwd file in container.
Add buildah info command
Enable -q when --filter is used for images command
Add v1.5 Release Announcement
Fix dangling filter for images command
Fix completions to print Names as well as IDs
tests: Fix file permissions
Bump 1.6-dev

v1.5-1 (2018-11-21)

Bump min go to 1.10 in install.md
vendor: update ostree-go
Update docker build command line in conformance test
Print command in SystemExec as debug information
Add some skip word for inspect check in conformance test
Update regex for multi stage base test
Sort CLI flags
vendor: update containers/storage
Add note to install about non-root on RHEL/CentOS
Update imagebuild depdency to support heading ARGs in Dockerfile
rootless: do not specify --rootless to the OCI runtime
Export resolvesymlink function
Exclude --force-rm from common bud cli flags
run: bind mount /etc/hosts and /etc/resolv.conf if not in a volume
rootless: use slirp4netns to setup the network namespace
Instructions for completing the pull command
Fix travis to not run environment variable patch
rootless: only discard network configuration names
run: only set up /etc/hosts or /etc/resolv.conf with network
common: getFormat: match entire string not only the prefix
vendor: update libpod
Change validation EPOCH
Fixing broken link for container-registries.conf
Restore rootless isolation test for from volume ro test
ostree: fix tag for build constraint
Handle directories better in bud -f
vndr in latest containers/storage
Fix unshare gofmt issue
runSetupBuiltinVolumes(): break up volume setup
common: support a per-user registries conf file
unshare: do not override the configuration
common: honor the rootless configuration file
unshare: create a new mount namespace
unshare: support libpod rootless pkg
Use libpod GetDefaultStorage to report proper storage config
Allow container storage to manage the SELinux labels
Resolve image names with default transport in from command
run: When the value of isolation is set, use the set value instead of the default value.
Vendor in latest containers/storage and opencontainers/selinux
Remove no longer valid todo
Check for empty buildTime in version
Change gofmt so it runs on all but 1.10
Run gofmt only on Go 1.11
Walk symlinks when checking cached images for copied/added files
ReserveSELinuxLabels(): handle wrapped errors from OpenBuilder
Set WorkingDir to empty, not / for conformance
Update calls in e2e to addres 1101
imagebuilder.BuildDockerfiles: return the image ID
Update for changes in the containers/image API
Allow setting --no-pivot default with an env var
Add man page and bash completion, for --no-pivot
Add the --no-pivot flag to the run command
Improve reporting about individual pull failures
Move the "short name but no search registries" error handling to resolveImage
Return a "search registries were needed but empty" indication in util.ResolveName
Simplify handling of the "tried to pull an image but found nothing" case in newBuilder
Don't even invoke the pull loop if options.FromImage == ""
Eliminate the long-running ref and img variables in resolveImage
In resolveImage, return immediately on success
Fix From As in Dockerfile
Vendor latest containers/image
Vendor in latest libpod
Sort CLI flags of buildah bud
Change from testing with golang 1.9 to 1.11.
unshare: detect when unprivileged userns are disabled
Optimize redundant code
fix missing format param
chroot: fix the args check
imagebuildah: make ResolveSymLink public
Update copy chown test
buildah: use the same logic for XDG_RUNTIME_DIR as podman
V1.4 Release Announcement
Podman  --privileged selinux is broken
papr: mount source at gopath
parse: Modify the return value
parse: modify the verification of the isolation value
Make sure we log or return every error
pullImage(): when completing an image name, try docker://
Fix up Tutorial 3 to account for format
Vendor in latest containers/storage and containers/image
docs/tutorials/01-intro.md: enhanced installation instructions
Enforce "blocked" for registries for the "docker" transport
Correctly set DockerInsecureSkipTLSVerify when pulling images
chroot: set up seccomp and capabilities after supplemental groups
chroot: fix capabilities list setup and application
.papr.yml: log the podman version
namespaces.bats: fix handling of uidmap/gidmap options in pairs
chroot: only create user namespaces when we know we need them
Check /proc/sys/user/max_user_namespaces on unshare(NEWUSERNS)
bash/buildah: add isolation option to the from command

v1.4 (2018-10-02)

from: fix isolation option
Touchup pull manpage
Export buildah ReserveSELinuxLables so podman can use it
Add buildah.io to README.md and doc fixes
Update rmi man for prune changes
Ignore file not found removal error in bud
NewImageSource(): only create one Diff() at a time
Copy ExposedPorts from base image into the config
tests: run conformance test suite in Travis
Change rmi --prune to not accept an imageID
Clear intermediate container IDs after each stage
Request podman version for build issues
unshare: keep the additional groups of the user
Builtin volumes should be owned by the UID/GID of the container
Get rid of dangling whitespace in markdown files
Move buildah from projecatatomic/buildah to containers/buildah
nitpick: parse.validateFlags loop in bud cli
bash: Completion options
Add signature policy to push tests
vendor in latest containers/image
Fix grammar in Container Tools Guide
Don't build btrfs if it is not installed
new: Return image-pulling errors from resolveImage
pull: Return image-pulling errors from pullImage
Add more volume mount tests
chroot: create missing parent directories for volume mounts
Push: Allow an empty destination
Add Podman relationship to readme, create container tools guide
Fix arg usage in buildah-tag
Add flags/arguments order verification to other commands
Handle ErrDuplicateName errors from store.CreateContainer()
Evaluate symbolic links on Add/Copy Commands
Vendor in latest containers/image and containers/storage
Retain bounding set when running containers as non root
run container-diff tests in Travis
buildah-images.md: Fix option contents
push: show image digest after push succeed
Vendor in latest containers/storage,image,libpod and runc
Change references to cri-o to point at new repository
Exclude --layers from the common bug cli flags
demos: Increase the executable permissions
run: clear default seccomp filter if not enabled
Bump maximum cyclomatic complexity to 45
stdin: on HUP, read everything
nitpick: use tabs in tests/helpers.bash
Add flags/arguments order verification to one arg commands
nitpick: decrease cognitive complexity in buildah-bud
rename: Avoid renaming the same name as other containers
chroot isolation: chroot() before setting up seccomp
Small nitpick at the "if" condition in tag.go
cmd/images: Modify json option
cmd/images: Disallow the input of image when using the -a option
Fix examples to include context directory
Update containers/image to fix commit layer issue
cmd/containers: End loop early when using the json option
Make buildah-from error message clear when flags are after arg
Touch up README.md for conformance tests
Update container/storage for lock fix
cmd/rm: restore the correct containerID display
Remove debug lines
Remove docker build image after each test
Add README for conformance test
Update the MakeOptions to accept all command options for buildah
Update regrex to fit the docker output in test "run with JSON"
cmd/buildah: Remove redundant variable declarations
Warn about using Commands in Dockerfile that are not supported by OCI.
Add buildah bud conformance test
Fix rename to also change container name in builder
Makefile: use $(GO) env-var everywhere
Cleanup code to more closely match Docker Build images
Document BUILDAH_* environment variables in buildah bud --help output
Return error immediately if error occurs in Prepare step
Fix --layers ADD from url issue
Add "Sign your PRs" TOC item to contributing.md.
Display the correct ID after deleting image
rmi: Modify the handling of errors
Let util.ResolveName() return parsing errors
Explain Open Container Initiative (OCI) acronym, add link
Update vendor for urfave/cli back to master
Handle COPY --chown in Dockerfile
Switch to Recommends container-selinux
Update vendor for containernetworking, imagebuildah and podman
Document STORAGE_DRIVER and STORAGE_OPTS environment variable
Change references to projectatomic/libpod to containers/libpod
Add container PATH retrieval example
Expand variables names for --env
imagebuildah: provide a way to provide stdin for RUN
Remove an unused srcRef.NewImageSource in pullImage
chroot: correct a comment
chroot: bind mount an empty directory for masking
Don't bother with --no-pivot for rootless isolation
CentOS need EPEL repo
Export a Pull() function
Remove stream options, since docker build does not have it
release v1.3: mention openSUSE
Add Release Announcements directory
Bump to v1.4-dev

1.3 (2018-08-4)

Revert pull error handling from 881
bud should not search context directory for Dockerfile
Set BUILDAH_ISOLATION=rootless when running unprivileged
.papr.sh: Also test with BUILDAH_ISOLATION=rootless
Skip certain tests when we're using "rootless" isolation
.travis.yml: run integration tests with BUILDAH_ISOLATION=chroot
Add and implement IsolationOCIRootless
Add a value for IsolationOCIRootless
Fix rmi to remove intermediate images associated with an image
Return policy error on pull
Update containers/image to 216acb1bcd2c1abef736ee322e17147ee2b7d76c
Switch to github.com/containers/image/pkg/sysregistriesv2
unshare: make adjusting the OOM score optional
Add flags validation
chroot: handle raising process limits
chroot: make the resource limits name map module-global
Remove rpm.bats, we need to run this manually
Set the default ulimits to match Docker
buildah: no args is out of bounds
unshare: error message missed the pid
preprocess ".in" suffixed Dockerfiles
Fix the the in buildah-config man page
Only test rpmbuild on latest fedora
Add support for multiple Short options
Update to latest urvave/cli
Add additional SELinux tests
Vendor in latest github.com/containers/{image;storage}
Stop testing with golang 1.8
Fix volume cache issue with buildah bud --layers
Create buildah pull command
Increase the deadline for gometalinter during 'make validate'
.papr.sh: Also test with BUILDAH_ISOLATION=chroot
.travis.yml: run integration tests with BUILDAH_ISOLATION=chroot
Add a Dockerfile
Set BUILDAH_ISOLATION=chroot when running unprivileged
Add and implement IsolationChroot
Update github.com/opencontainers/runc
maybeReexecUsingUserNamespace: add a default for root
Allow ping command without NET_RAW Capabilities
rmi.storageImageID: fix Wrapf format warning
Allow Dockerfile content to come from stdin
Vendor latest container/storage to fix overlay mountopt
userns: assign additional IDs sequentially
Remove default dev/pts
Add OnBuild test to baseline test
tests/run.bats(volumes): use :z when SELinux is enabled
Avoid a stall in runCollectOutput()
Use manifest from container/image
Vendor in latest containers/image and containers/storage
add rename command
Completion command
Update vendor for runc to fix 32 bit builds
bash completion: remove shebang
Update vendor for runc to fix 32 bit builds

1.2 (2018-07-14)

Vendor in lates containers/image
build-using-dockerfile: let -t include transports again
Block use of /proc/acpi and /proc/keys from inside containers
Fix handling of --registries-conf
Fix becoming a maintainer link
add optional CI test fo darwin
Don't pass a nil error to errors.Wrapf()
image filter test: use kubernetes/pause as a "since"
Add --cidfile option to from
vendor: update containers/storage
Contributors need to find the CONTRIBUTOR.md file easier
Add a --loglevel option to build-with-dockerfile
Create Development plan
cmd: Code improvement
allow buildah cross compile for a darwin target
Add unused function param lint check
docs: Follow man-pages(7) suggestions for SYNOPSIS
Start using github.com/seccomp/containers-golang
umount: add all option to umount all mounted containers
runConfigureNetwork(): remove an unused parameter
Update github.com/opencontainers/selinux
Fix buildah bud --layers
Force ownership of /etc/hosts and /etc/resolv.conf to 0:0
main: if unprivileged, reexec in a user namespace
Vendor in latest imagebuilder
Reduce the complexity of the buildah.Run function
mount: output it before replacing lastError
Vendor in latest selinux-go code
Implement basic recognition of the "--isolation" option
Run(): try to resolve non-absolute paths using $PATH
Run(): don't include any default environment variables
build without seccomp
vendor in latest runtime-tools
bind/mount_unsupported.go: remove import errors
Update github.com/opencontainers/runc
Add Capabilities lists to BuilderInfo
Tweaks for commit tests
commit: recognize committing to second storage locations
Fix ARGS parsing for run commands
Add info on registries.conf to from manpage
Switch from using docker to podman for testing in .papr
buildah: set the HTTP User-Agent
ONBUILD tutorial
Add information about the configuration files to the install docs
Makefile: add uninstall
Add tilde info for push to troubleshooting
mount: support multiple inputs
Use the right formatting when adding entries to /etc/hosts
Vendor in latest go-selinux bindings
Allow --userns-uid-map/--userns-gid-map to be global options
bind: factor out UnmountMountpoints
Run(): simplify runCopyStdio()
Run(): handle POLLNVAL results
Run(): tweak terminal mode handling
Run(): rename 'copyStdio' to 'copyPipes'
Run(): don't set a Pdeathsig for the runtime
Run(): add options for adding and removing capabilities
Run(): don't use a callback when a slice will do
setupSeccomp(): refactor
Change RunOptions.Stdin/Stdout/Stderr to just be Reader/Writers
Escape use of '_' in .md docs
Break out getProcIDMappings()
Break out SetupIntermediateMountNamespace()
Add Multi From Demo
Use the c/image conversion code instead of converting configs manually
Don't throw away the manifest MIME type and guess again
Consolidate loading manifest and config in initConfig
Pass a types.Image to Builder.initConfig
Require an image ID in importBuilderDataFromImage
Use c/image/manifest.GuessMIMEType instead of a custom heuristic
Do not ignore any parsing errors in initConfig
Explicitly handle "from scratch" images in Builder.initConfig
Fix parsing of OCI images
Simplify dead but dangerous-looking error handling
Don't ignore v2s1 history if docker_version is not set
Add --rm and --force-rm to buildah bud
Add --all,-a flag to buildah images
Separate stdio buffering from writing
Remove tty check from images --format
Add environment variable BUILDAH_RUNTIME
Add --layers and --no-cache to buildah bud
Touch up images man
version.md: fix DESCRIPTION
tests: add containers test
tests: add images test
images: fix usage
fix make clean error
Change 'registries' to 'container registries' in man
add commit test
Add(): learn to record hashes of what we add
Minor update to buildah config documentation for entrypoint
Bump to v1.2-dev
Add registries.conf link to a few man pages

1.1 (2018-06-08)

Drop capabilities if running container processes as non root
Print Warning message if cmd will not be used based on entrypoint
Update 01-intro.md
Shouldn't add insecure registries to list of search registries
Report errors on bad transports specification when pushing images
Move parsing code out of common for namespaces and into pkg/parse.go
Add disable-content-trust noop flag to bud
Change freenode chan to buildah
runCopyStdio(): don't close stdin unless we saw POLLHUP
Add registry errors for pull
runCollectOutput(): just read until the pipes are closed on us
Run(): provide redirection for stdio
rmi, rm: add test
add mount test
Add parameter judgment for commands that do not require parameters
Add context dir to bud command in baseline test
run.bats: check that we can run with symlinks in the bundle path
Give better messages to users when image can not be found
use absolute path for bundlePath
Add environment variable to buildah --format
rm: add validation to args and all option
Accept json array input for config entrypoint
Run(): process RunOptions.Mounts, and its flags
Run(): only collect error output from stdio pipes if we created some
Add OnBuild support for Dockerfiles
Quick fix on demo readme
run: fix validate flags
buildah bud should require a context directory or URL
Touchup tutorial for run changes
Validate common bud and from flags
images: Error if the specified imagename does not exist
inspect: Increase err judgments to avoid panic
add test to inspect
buildah bud picks up ENV from base image
Extend the amount of time travis_wait should wait
Add a make target for Installing CNI plugins
Add tests for namespace control flags
copy.bats: check ownerships in the container
Fix SELinux test errors when SELinux is enabled
Add example CNI configurations
Run: set supplemental group IDs
Run: use a temporary mount namespace
Use CNI to configure container networks
add/secrets/commit: Use mappings when setting permissions on added content
Add CLI options for specifying namespace and cgroup setup
Always set mappings when using user namespaces
Run(): break out creation of stdio pipe descriptors
Read UID/GID mapping information from containers and images
Additional bud CI tests
Run integration tests under travis_wait in Travis
build-using-dockerfile: add --annotation
Implement --squash for build-using-dockerfile and commit
Vendor in latest container/storage for devicemapper support
add test to inspect
Vendor github.com/onsi/ginkgo and github.com/onsi/gomega
Test with Go 1.10, too
Add console syntax highlighting to troubleshooting page
bud.bats: print "$output" before checking its contents
Manage "Run" containers more closely
Break Builder.Run()'s "run runc" bits out
util.ResolveName(): handle completion for tagged/digested image names
Handle /etc/hosts and /etc/resolv.conf properly in container
Documentation fixes
Make it easier to parse our temporary directory as an image name
Makefile: list new pkg/ subdirectoris as dependencies for buildah
containerImageSource: return more-correct errors
API cleanup: PullPolicy and TerminalPolicy should be types
Make "run --terminal" and "run -t" aliases for "run --tty"
Vendor github.com/containernetworking/cni v0.6.0
Update github.com/containers/storage
Update github.com/containers/libpod
Add support for buildah bud --label
buildah push/from can push and pull images with no reference
Vendor in latest containers/image
Update gometalinter to fix install.tools error
Update troubleshooting with new run workaround
Added a bud demo and tidied up
Attempt to download file from url, if fails assume Dockerfile
Add buildah bud CI tests for ENV variables
Re-enable rpm .spec version check and new commit test
Update buildah scratch demo to support el7
Added Docker compatibility demo
Update to F28 and new run format in baseline test
Touchup man page short options across man pages
Added demo dir and a demo. chged distrorlease
builder-inspect: fix format option
Add cpu-shares short flag (-c) and cpu-shares CI tests
Minor fixes to formatting in rpm spec changelog
Fix rpm .spec changelog formatting
CI tests and minor fix for cache related noop flags
buildah-from: add effective value to mount propagation

1.0 (2018-05-06)

Declare Buildah 1.0
Add cache-from and no-cache noops, and fix doco
Update option and documentation for --force-rm
Adding noop for --force-rm to match --rm
Add buildah bud ENTRYPOINT,CMD,RUN tests
Adding buildah bud RUN test scenarios
Extend tests for empty buildah run command
Fix formatting error in run.go
Update buildah run to make command required
Expanding buildah run cmd/entrypoint tests
Update test cases for buildah run behaviour
Remove buildah run cmd and entrypoint execution
Add Files section with registries.conf to pertinent man pages
tests/config: perfect test
tests/from: add name test
Do not print directly to stdout in Commit()
Touch up auth test commands
Force "localhost" as a default registry
Drop util.GetLocalTime()
Vendor in latest containers/image
Validate host and container paths passed to --volume
test/from: add add-host test
Add --compress, --rm, --squash flags as a noop for bud
Add FIPS mode secret to buildah run and bud
Add config --comment/--domainname/--history-comment/--hostname
'buildah config': stop replacing Created-By whenever it's not specified
Modify man pages so they compile correctly in mandb
Add description on how to do --isolation to buildah-bud man page
Add support for --iidfile to bud and commit
Refactor buildah bud for vendoring
Fail if date or git not installed
Revert update of entrypoint behaviour to match docker
Vendor in latest imagebuilder code to fix multiple stage builds
Add /bin/sh -c to entrypoint in config
image_test: Improve the test
Fix README example of buildah config
buildah-image: add validation to 'format'
Simple changes to allow buildah to pass make validate
Clarify the use of buildah config options
containers_test: Perfect testing
buildah images and podman images are listing different sizes
buildah-containers: add tests and example to the man page
buildah-containers: add validation to 'format'
Clarify the use of buildah config options
Minor fix for lighttpd example in README
Add tls-verification to troubleshooting
Modify buildah rmi to account for changes in containers/storage
Vendor in latest containers/image and containers/storage
addcopy: add src validation
Remove tarball as an option from buildah push --help
Fix secrets patch
Update entrypoint behaviour to match docker
Display imageId after commit
config: add support for StopSignal
Fix docker login issue in travis.yml
Allow referencing stages as index and names
Add multi-stage builds tests
Add multi-stage builds support
Add accessor functions for comment and stop signal
Vendor in latest imagebuilder, to get mixed case AS support
Allow umount to have multi-containers
Update buildah push doc
buildah bud walks symlinks
Imagename is required for commit atm, update manpage

0.16.0 (2018-04-08)

Bump to v0.16.0
Remove requires for ostree-lib in rpm spec file
Add support for shell
buildah.spec should require ostree-libs
Vendor in latest containers/image
bash: prefer options
Change image time to locale, add troubleshooting.md, add logo to other mds
buildah-run.md: fix error SYNOPSIS
docs: fix error example
Allow --cmd parameter to have commands as values
Touchup README to re-enable logo
Clean up README.md
Make default-mounts-file a hidden option
Document the mounts.conf file
Fix man pages to format correctly
Add various transport support to buildah from
Add unit tests to run.go
If the user overrides the storage driver, the options should be dropped
Show Config/Manifest as JSON string in inspect when format is not set
Switch which for that in README.md
Remove COPR
Fix wrong order of parameters
Vendor in latest containers/image
Remove shallowCopy(), which shouldn't be saving us time any more
shallowCopy: avoid a second read of the container's layer

0.5 - 2017-11-07

Add secrets patch to buildah
Add proper SELinux labeling to buildah run
Add tls-verify to bud command
Make filtering by date use the image's date
images: don't list unnamed images twice
Fix timeout issue
Add further tty verbiage to buildah run
Make inspect try an image on failure if type not specified
Add support for `buildah run --hostname`
Tons of bug fixes and code cleanup

0.4 - 2017-09-22


Update buildah spec file to match new version
Bump to version 0.4
Add default transport to push if not provided
Add authentication to commit and push
Remove --transport flag
Run: don't complain about missing volume locations
Add credentials to buildah from
Remove export command
Bump containers/storage and containers/image

0.3 - 2017-07-20

0.2 - 2017-07-18


Vendor in latest containers/image and containers/storage
Update image-spec and runtime-spec to v1.0.0
Add support for -- ending options parsing to buildah run
Add/Copy need to support glob syntax
Add flag to remove containers on commit
Add buildah export support
update 'buildah images' and 'buildah rmi' commands
buildah containers/image: Add JSON output option
Add 'buildah version' command
Handle "run" without an explicit command correctly
Ensure volume points get created, and with perms
Add a -a/--all option to "buildah containers"

0.1 - 2017-06-14


Vendor in latest container/storage container/image
Add a "push" command
Add an option to specify a Create date for images
Allow building a source image from another image
Improve buildah commit performance
Add a --volume flag to "buildah run"
Fix inspect/tag-by-truncated-image-ID
Include image-spec and runtime-spec versions
buildah mount command should list mounts when no arguments are given.
Make the output image format selectable
commit images in multiple formats
Also import configurations from V2S1 images
Add a "tag" command
Add an "inspect" command
Update reference comments for docker types origins
Improve configuration preservation in imagebuildah
Report pull/commit progress by default
Contribute buildah.spec
Remove --mount from buildah-from
Add a build-using-dockerfile command (alias: bud)
Create manpages for the buildah project
Add installation for buildah and bash completions
Rename "list"/"delete" to "containers"/"rm"
Switch `buildah list quiet` option to only list container id's
buildah delete should be able to delete multiple containers
Correctly set tags on the names of pulled images
Don't mix "config" in with "run" and "commit"
Add a "list" command, for listing active builders
Add "add" and "copy" commands
Add a "run" command, using runc
Massive refactoring
Make a note to distinguish compression of layers

0.0 - 2017-01-26


Initial version, needs work