"Fossies" - the Fresh Open Source Software Archive

Member "OpenSP-1.5.2/lib/ParserMessages.rc" (21 Jul 2005, 31180 Bytes) of package /linux/misc/old/OpenSP-1.5.2.tar.gz:


As a special service "Fossies" has tried to format the requested text file into HTML format (style: standard) with prefixed line numbers. Alternatively you can here view or download the uninterpreted source code file.

    1 STRINGTABLE
    2 BEGIN
    3   0, "length of name must not exceed NAMELEN (%1)"
    4   1, "length of parameter entity name must not exceed NAMELEN less the length of the PERO delimiter (%1)"
    5   2, "length of number must not exceed NAMELEN (%1)"
    6   3, "length of attribute value must not exceed LITLEN less NORMSEP (%1)"
    7   4, "a name group is not allowed in a parameter entity reference in the prolog"
    8   5, "an entity end in a token separator must terminate an entity referenced in the same group"
    9   6, "character %1 invalid: only %2 and token separators allowed"
   10   7, "a parameter separator is required after a number that is followed by a name start character"
   11   8, "character %1 invalid: only %2 and parameter separators allowed"
   12   9, "an entity end in a parameter separator must terminate an entity referenced in the same declaration"
   13   10, "an entity end is not allowed in a token separator that does not follow a token"
   14   11, "%1 is not a valid token here"
   15   12, "a parameter entity reference can only occur in a group where a token could occur"
   16   13, "token %1 has already occurred in this group"
   17   14, "the number of tokens in a group must not exceed GRPCNT (%1)"
   18   15, "an entity end in a literal must terminate an entity referenced in the same literal"
   19   16, "character %1 invalid: only minimum data characters allowed"
   20   18, "a parameter literal in a data tag pattern must not contain a numeric character reference to a non-SGML character"
   21   19, "a parameter literal in a data tag pattern must not contain a numeric character reference to a function character"
   22   20, "a name group is not allowed in a general entity reference in a start tag"
   23   21, "a name group is not allowed in a general entity reference in the prolog"
   24   22, "%1 is not a function name"
   25   23, "%1 is not a character number in the document character set"
   26   24, "parameter entity %1 not defined"
   27   25, "general entity %1 not defined and no default entity"
   28   26, "RNI delimiter must be followed by name start character"
   29   28, "unterminated comment: found end of entity inside comment"
   30   29, "comment started here"
   31   30, "only one type of connector should be used in a single group"
   32   31, "%1 is not a reserved name"
   33   32, "%1 is not allowed as a reserved name here"
   34   33, "length of interpreted minimum literal must not exceed reference LITLEN (%1)"
   35   34, "length of tokenized attribute value must not exceed LITLEN less NORMSEP (%1)"
   36   35, "length of system identifier must not exceed LITLEN (%1)"
   37   36, "length of interpreted parameter literal must not exceed LITLEN (%1)"
   38   37, "length of interpreted parameter literal in data tag pattern must not exceed DTEMPLEN (%1)"
   39   38, "literal is missing closing delimiter"
   40   39, "%1 invalid: only %2 and parameter separators are allowed"
   41   40, "%1 invalid: only %2 and token separators are allowed"
   42   41, "%1 invalid: only %2 and token separators are allowed"
   43   42, "unknown declaration type %1"
   44   43, "%1 declaration not allowed in DTD subset"
   45   44, "character %1 not allowed in declaration subset"
   46   45, "end of document in DTD subset"
   47   46, "character %1 not allowed in prolog"
   48   47, "end of document in prolog"
   49   48, "%1 declaration not allowed in prolog"
   50   49, "%1 used both a rank stem and generic identifier"
   51   50, "omitted tag minimization parameter can be omitted only if OMITTAG NO is specified"
   52   51, "element type %1 already defined"
   53   52, "entity reference with no applicable DTD"
   54   53, "invalid comment declaration: found %1 outside comment but inside comment declaration"
   55   54, "comment declaration started here"
   56   55, "%1 declaration not allowed in instance"
   57   56, "non-SGML character not allowed in content"
   58   57, "no current rank for rank stem %1"
   59   58, "duplicate attribute definition list for notation %1"
   60   59, "duplicate attribute definition list for element %1"
   61   60, "entity end not allowed in end tag"
   62   61, "character %1 not allowed in end tag"
   63   62, "%1 invalid: only S separators and TAGC allowed here"
   64   63, "character data is not allowed here"
   65   64, "document type does not allow element %1 here"
   66   65, "document type does not allow element %1 here; missing one of %2 start-tag"
   67   66, "document type does not allow element %1 here; assuming missing %2 start-tag"
   68   67, "no start tag specified for implied empty element %1"
   69   68, "end tag for %1 omitted, but its declaration does not permit this"
   70   69, "start tag was here"
   71   70, "end tag for %1 omitted, but OMITTAG NO was specified"
   72   71, "start tag was here"
   73   72, "start tag omitted for element %1 with declared content"
   74   73, "end tag for %1 which is not finished"
   75   74, "start tag for %1 omitted, but its declaration does not permit this"
   76   75, "number of open elements exceeds TAGLVL (%1)"
   77   76, "element %1 undefined"
   78   77, "empty end tag but no open elements"
   79   78, "%1 not finished but containing element ended"
   80   79, "end tag for element %1 which is not open"
   81   80, "internal parameter entity %1 cannot be CDATA or SDATA"
   82   81, "character %1 not allowed in attribute specification list"
   83   82, "an attribute value must be a literal unless it contains only name characters"
   84   83, "entity end not allowed in attribute specification list except in attribute value literal"
   85   84, "external parameter entity %1 cannot be CDATA, SDATA, NDATA or SUBDOC"
   86   85, "duplicate declaration of entity %1"
   87   86, "duplicate declaration of parameter entity %1"
   88   87, "a reference to a PI entity is allowed only in a context where a processing instruction could occur"
   89   88, "a reference to a CDATA or SDATA entity is allowed only in a context where a data character could occur"
   90   89, "a reference to a subdocument entity or external data entity is allowed only in a context where a data character could occur"
   91   90, "a reference to a subdocument entity or external data entity is not allowed in replaceable character data"
   92   91, "the number of open entities cannot exceed ENTLVL (%1)"
   93   92, "a reference to a PI entity is not allowed in replaceable character data"
   94   93, "entity %1 is already open"
   95   94, "short reference map %1 not defined"
   96   95, "short reference map in DTD must specify associated element type"
   97   96, "short reference map in document instance cannot specify associated element type"
   98   97, "short reference map %1 for element %2 not defined in DTD"
   99   98, "%1 is not a short reference delimiter"
  100   99, "short reference delimiter %1 already mapped in this declaration"
  101   100, "no document element"
  102   102, "entity end not allowed in processing instruction"
  103   103, "length of processing instruction must not exceed PILEN (%1)"
  104   104, "missing PIC delimiter"
  105   105, "an attribute specification must start with a name or name token"
  106   106, "%1 is not a member of a group specified for any attribute"
  107   107, "the name and VI delimiter can be omitted from an attribute specification only if SHORTTAG YES is specified"
  108   108, "there is no attribute %1"
  109   109, "an attribute value specification must start with a literal or a name character"
  110   110, "length of name token must not exceed NAMELEN (%1)"
  111   111, "an attribute value literal can occur in an attribute specification list only after a VI delimiter"
  112   112, "duplicate specification of attribute %1"
  113   113, "duplicate definition of attribute %1"
  114   114, "data attribute specification must be omitted if attribute specification list is empty"
  115   115, "marked section end not in marked section declaration"
  116   116, "number of open marked sections must not exceed TAGLVL (%1)"
  117   117, "missing marked section end"
  118   118, "marked section started here"
  119   119, "entity end in character data, replaceable character data or ignored marked section"
  120   120, "normalized length of attribute value literal must not exceed LITLEN (%1); length was %2"
  121   121, "syntax of attribute value does not conform to declared value"
  122   122, "character %1 is not allowed in the value of attribute %2"
  123   123, "value of attribute %1 must be a single token"
  124   124, "value of attribute %2 invalid: %1 cannot start a number token"
  125   125, "value of attribute %2 invalid: %1 cannot start a name"
  126   126, "non-impliable attribute %1 not specified but OMITTAG NO and SHORTTAG NO"
  127   127, "required attribute %1 not specified"
  128   128, "first occurrence of CURRENT attribute %1 not specified"
  129   129, "%1 is not a notation name"
  130   130, "%1 is not a general entity name"
  131   131, "value of attribute %2 cannot be %1; must be one of %3"
  132   132, "%1 is not a data or subdocument entity"
  133   133, "content model is ambiguous: when no tokens have been matched, both the %2 and %3 occurrences of %1 are possible"
  134   134, "content model is ambiguous: when the current token is the %2 occurrence of %1, both the %4 and %5 occurrences of %3 are possible"
  135   135, "content model is ambiguous: when the current token is the %2 occurrence of %1 and the innermost containing AND group has been matched, both the %4 and %5 occurrences of %3 are possible"
  136   136, "content model is ambiguous: when the current token is the %2 occurrence of %1 and the innermost %3 containing AND groups have been matched, both the %5 and %6 occurrences of %4 are possible"
  137   137, "invalid comment declaration: found character %1 outside comment but inside comment declaration"
  138   138, "comment declaration started here"
  139   139, "non SGML character number %1"
  140   140, "data or replaceable character data in declaration subset"
  141   141, "ID %1 already defined"
  142   142, "ID %1 first defined here"
  143   143, "value of fixed attribute %1 not equal to default"
  144   144, "character %1 is not significant in the reference concrete syntax and so cannot occur in a comment in the SGML declaration"
  145   145, "minimum data of first minimum literal in SGML declaration must be ""ISO 8879:1986"" or ""ISO 8879:1986 (ENR)"" or ""ISO 8879:1986 (WWW)"" not %1"
  146   146, "parameter before LCNMSTRT must be NAMING not %1"
  147   147, "unexpected entity end in SGML declaration: only %1, S separators and comments allowed"
  148   148, "%1 invalid: only %2 and parameter separators allowed"
  149   149, "magnitude of %1 too big"
  150   150, "character %1 is not significant in the reference concrete syntax and so cannot occur in a literal in the SGML declaration except as the replacement of a character reference"
  151   151, "%1 is not a valid syntax reference character number"
  152   152, "a parameter entity reference cannot occur in an SGML declaration"
  153   153, "%1 invalid: only %2 and parameter separators are allowed"
  154   154, "cannot continue because of previous errors"
  155   155, "SGML declaration cannot be parsed because the character set does not contain characters having the following numbers in ISO 646: %1"
  156   156, "the specified character set is invalid because it does not contain the minimum data characters having the following numbers in ISO 646: %1"
  157   157, "character numbers declared more than once: %1"
  158   158, "character numbers should have been declared UNUSED: %1"
  159   159, "character numbers missing in base set: %1"
  160   160, "characters in the document character set with numbers exceeding %1 not supported"
  161   161, "invalid formal public identifier %1: missing //"
  162   162, "invalid formal public identifier %1: no SPACE after public text class"
  163   163, "invalid formal public identifier %1: invalid public text class"
  164   164, "invalid formal public identifier %1: public text language must be a name containing only upper case letters"
  165   165, "invalid formal public identifer %1: public text display version not permitted with this text class"
  166   166, "invalid formal public identifier %1: extra field"
  167   167, "public text class of public identifier in notation identifier must be NOTATION"
  168   168, "base character set %1 is unknown"
  169   169, "delimiter set is ambiguous: %1 and %2 can be recognized in the same mode"
  170   170, "characters with the following numbers in the syntax reference character set are significant in the concrete syntax but are not in the document character set: %1"
  171   171, "there is no unique character in the document character set corresponding to character number %1 in the syntax reference character set"
  172   172, "there is no unique character in the internal character set corresponding to character number %1 in the syntax reference character set"
  173   173, "the character with number %1 in ISO 646 is significant but has no representation in the syntax reference character set"
  174   174, "capacity set %1 is unknown"
  175   175, "capacity %1 already specified"
  176   176, "value of capacity %1 exceeds value of TOTALCAP"
  177   177, "syntax %1 is unknown"
  178   178, "UCNMSTRT must have the same number of characters as LCNMSTRT"
  179   179, "UCNMCHAR must have the same number of characters as LCNMCHAR"
  180   180, "number of open subdocuments exceeds quantity specified for SUBDOC parameter in SGML declaration (%1)"
  181   181, "entity %1 declared SUBDOC, but SUBDOC NO specified in SGML declaration"
  182   182, "a parameter entity referenced in a parameter separator must end in the same declaration"
  183   183, "reference to non-existent ID %1"
  184   184, "generic identifier %1 used in DTD but not defined"
  185   185, "%1 not finished but document ended"
  186   186, "cannot continue with subdocument because of previous errors"
  187   187, "no document type declaration; will parse without validation"
  188   188, "no internal or external document type declaration subset; will parse without validation"
  189   189, "this is not an SGML document"
  190   190, "length of start-tag before interpretation of literals must not exceed TAGLEN (%1)"
  191   191, "a parameter entity referenced in a token separator must end in the same group"
  192   192, "the following character numbers are shunned characters that are not significant and so should have been declared UNUSED: %1"
  193   193, "there is no unique character in the specified document character set corresponding to character number %1 in ISO 646"
  194   194, "length of attribute value must not exceed LITLEN less NORMSEP (-%1)"
  195   195, "length of tokenized attribute value must not exceed LITLEN less NORMSEP (-%1)"
  196   196, "concrete syntax scope is INSTANCE but value of %1 quantity is less than value in reference quantity set"
  197   197, "public text class of formal public identifier of base character set must be CHARSET"
  198   198, "public text class of formal public identifier of capacity set must be CAPACITY"
  199   199, "public text class of formal public identifier of concrete syntax must be SYNTAX"
  200   200, "when there is an MSOCHAR there must also be an MSICHAR"
  201   201, "character number %1 in the syntax reference character set was specified as a character to be switched but is not a markup character"
  202   202, "character number %1 was specified as a character to be switched but is not in the syntax reference character set"
  203   203, "character numbers %1 in the document character set have been assigned the same meaning, but this is the meaning of a significant character"
  204   204, "character number %1 assigned to more than one function"
  205   205, "%1 is already a function name"
  206   206, "characters with the following numbers in ISO 646 are significant in the concrete syntax but are not in the document character set: %1"
  207   207, "general delimiter %1 consists solely of function characters"
  208   208, "letters assigned to LCNMCHAR, UCNMCHAR, LCNMSTRT or UCNMSTRT: %1"
  209   209, "digits assigned to LCNMCHAR, UCNMCHAR, LCNMSTRT or UCNMSTRT: %1"
  210   210, "character number %1 cannot be assigned to LCNMCHAR, UCNMCHAR, LCNMSTRT or UCNMSTRT because it is RE"
  211   211, "character number %1 cannot be assigned to LCNMCHAR, UCNMCHAR, LCNMSTRT or UCNMSTRT because it is RS"
  212   212, "character number %1 cannot be assigned to LCNMCHAR, UCNMCHAR, LCNMSTRT or UCNMSTRT because it is SPACE"
  213   213, "separator characters assigned to LCNMCHAR, UCNMCHAR, LCNMSTRT or UCNMSTRT: %1"
  214   214, "character number %1 cannot be switched because it is a Digit, LC Letter or UC Letter"
  215   215, "pointless for number of characters to be 0"
  216   216, "%1 cannot be the replacement for a reference reserved name because it is another reference reserved name"
  217   217, "%1 cannot be the replacement for a reference reserved name because it is the replacement of another reference reserved name"
  218   218, "replacement for reserved name %1 already specified"
  219   219, "%1 is not a valid name in the declared concrete syntax"
  220   220, "%1 is not a valid short reference delimiter because it has more than one B sequence"
  221   221, "%1 is not a valid short reference delimiter because it is adjacent to a character that can occur in a blank sequence"
  222   222, "length of delimiter %1 exceeds NAMELEN (%2)"
  223   223, "length of reserved name %1 exceeds NAMELEN (%2)"
  224   224, "character numbers assigned to both LCNMCHAR or UCNMCHAR and LCNMSTRT or UCNMSTRT: %1"
  225   225, "when the concrete syntax scope is INSTANCE the syntax reference character set of the declared syntax must be the same as that of the reference concrete syntax"
  226   226, "end-tag minimization should be O for element with declared content of EMPTY"
  227   227, "end-tag minimization should be O for element %1 because it has CONREF attribute"
  228   228, "element %1 has a declared content of EMPTY and a CONREF attribute"
  229   229, "element %1 has a declared content of EMPTY and a NOTATION attribute"
  230   230, "declared value of data attribute cannot be ENTITY, ENTITIES, ID, IDREF, IDREFS or NOTATION"
  231   231, "default value of data attribute cannot be CONREF or CURRENT"
  232   232, "number of attribute names and name tokens (%1) exceeds ATTCNT (%2)"
  233   233, "if the declared value is ID the default value must be IMPLIED or REQUIRED"
  234   234, "the attribute definition list already declared attribute %1 as the ID attribute"
  235   235, "the attribute definition list already declared attribute %1 as the NOTATION attribute"
  236   236, "token %1 occurs more than once in attribute definition list"
  237   237, "no attributes defined for notation %1"
  238   238, "notation %1 for entity %2 undefined"
  239   239, "entity %1 undefined in short reference map %2"
  240   240, "notation %1 is undefined but had attribute definition"
  241   241, "length of interpreted parameter literal in bracketed text plus the length of the bracketing delimiters must not exceed LITLEN (%1)"
  242   242, "length of rank stem plus length of rank suffix must not exceed NAMELEN (%1)"
  243   243, "document instance must start with document element"
  244   244, "content model nesting level exceeds GRPLVL (%1)"
  245   245, "grand total of content tokens exceeds GRPGTCNT (%1)"
  246   246, "unclosed start-tag requires SHORTTAG YES"
  247   247, "NET-enabling start-tag requires SHORTTAG YES"
  248   248, "unclosed end-tag requires SHORTTAG YES"
  249   249, "DTDs other than base allowed only if CONCUR YES or EXPLICIT YES"
  250   250, "end of entity other than document entity after document element"
  251   251, "%1 declaration illegal after document element"
  252   252, "character reference illegal after document element"
  253   253, "entity reference illegal after document element"
  254   254, "marked section illegal after document element"
  255   255, "the %1 occurrence of %2 in the content model for %3 cannot be excluded at this point because it is contextually required"
  256   256, "the %1 occurrence of %2 in the content model for %3 cannot be excluded because it is neither inherently optional nor a member of an OR group"
  257   257, "an attribute value specification must be an attribute value literal unless SHORTTAG YES is specified"
  258   258, "value cannot be specified both for notation attribute and content reference attribute"
  259   259, "notation %1 already defined"
  260   260, "short reference map %1 already defined"
  261   261, "first defined here"
  262   262, "general delimiter role %1 already defined"
  263   263, "number of ID references in start-tag must not exceed GRPCNT (%1)"
  264   264, "number of entity names in attribute specification list must not exceed GRPCNT (%1)"
  265   265, "normalized length of attribute specification list must not exceed ATTSPLEN (%1); length was %2"
  266   266, "short reference delimiter %1 already specified"
  267   267, "single character short references were already specified for character numbers: %1"
  268   268, "default entity used in entity attribute %1"
  269   269, "reference to entity %1 uses default entity"
  270   270, "entity %1 in short reference map %2 uses default entity"
  271   271, "no DTD %1 declared"
  272   272, "LPD %1 has neither internal nor external subset"
  273   273, "element types have different link attribute definitions"
  274   274, "link set %1 already defined"
  275   275, "empty result attribute specification"
  276   276, "no source element type %1"
  277   277, "no result element type %1"
  278   278, "end of document in LPD subset"
  279   279, "%1 declaration not allowed in LPD subset"
  280   280, "ID link set declaration not allowed in simple link declaration subset"
  281   281, "link set declaration not allowed in simple link declaration subset"
  282   282, "attributes can only be defined for base document element (not %1) in simple link declaration subset"
  283   283, "a short reference mapping declaration is allowed only in the base DTD"
  284   284, "a short reference use declaration is allowed only in the base DTD"
  285   285, "default value of link attribute cannot be CURRENT or CONREF"
  286   286, "declared value of link attribute cannot be ID, IDREF, IDREFS or NOTATION"
  287   287, "only fixed attributes can be defined in simple LPD"
  288   288, "only one ID link set declaration allowed in an LPD subset"
  289   289, "no initial link set defined for LPD %1"
  290   290, "notation %1 not defined in source DTD"
  291   291, "result document type in simple link specification must be implied"
  292   292, "simple link requires SIMPLE YES"
  293   293, "implicit link requires IMPLICIT YES"
  294   294, "explicit link requires EXPLICIT YES"
  295   295, "LPD not allowed before first DTD"
  296   296, "DTD not allowed after an LPD"
  297   297, "definition of general entity %1 is unstable"
  298   298, "definition of parameter entity %1 is unstable"
  299   299, "multiple link rules for ID %1 but not all have link attribute specifications"
  300   300, "multiple link rules for element type %1 but not all have link attribute specifications"
  301   301, "link type %1 does not have a link set %2"
  302   302, "link set use declaration for simple link process"
  303   303, "no link type %1"
  304   304, "both document type and link type %1"
  305   305, "link type %1 already defined"
  306   306, "document type %1 already defined"
  307   307, "link set %1 used in LPD but not defined"
  308   308, "#IMPLIED already linked to result element type %1"
  309   309, "number of active simple link processes exceeds quantity specified for SIMPLE parameter in SGML declaration (%1)"
  310   310, "only one chain of explicit link processes can be active"
  311   311, "source document type name for link type %1 must be base document type since EXPLICIT YES 1"
  312   312, "only one implicit link process can be active"
  313   313, "sorry, link type %1 not activated: only one implicit or explicit link process can be active (with base document type as source document type)"
  314   314, "name missing after name group in entity reference"
  315   315, "source document type name for link type %1 must be base document type since EXPLICIT NO"
  316   316, "link process must be activated before base DTD"
  317   317, "unexpected entity end while starting second pass"
  318   318, "type %1 of element with ID %2 not associated element type for applicable link rule in ID link set"
  319   319, "DATATAG feature not implemented"
  320   320, "generic identifier specification missing after document type specification in start-tag"
  321   321, "generic identifier specification missing after document type specification in end-tag"
  322   322, "a NET-enabling start-tag cannot include a document type specification"
  323   323, "DTD did not contain element declaration for document type name"
  324   324, "invalid default SGML declaration"
  325   325, "reference to entity %1 for which no system identifier could be generated"
  326   326, "entity was defined here"
  327   327, "content model is mixed but does not allow #PCDATA everywhere"
  328   328, "start or end of range must specify a single character"
  329   329, "number of first character in range must not exceed number of second character in range"
  330   330, "delimiter cannot be an empty string"
  331   331, "too many characters assigned same meaning with minimum literal"
  332   332, "earlier reference to entity %1 used default entity"
  333   333, "empty start-tag"
  334   334, "empty end-tag"
  335   335, "unused short reference map %1"
  336   336, "unused parameter entity %1"
  337   337, "cannot generate system identifier for public text %1"
  338   338, "cannot generate system identifier for general entity %1"
  339   339, "cannot generate system identifier for parameter entity %1"
  340   340, "cannot generate system identifier for document type %1"
  341   341, "cannot generate system identifier for link type %1"
  342   342, "cannot generate system identifier for notation %1"
  343   343, "element type %1 both included and excluded"
  344   344, "no document type declaration; implying %1"
  345   345, "minimum data of AFDR declaration must be ""ISO/IEC 10744:1997"" not %1"
  346   346, "AFDR declaration required before use of AFDR extensions"
  347   347, "ENR extensions were used but minimum literal was not ""ISO 8879:1986 (ENR)"" or ""ISO 8879:1986 (WWW)"""
  348   348, "illegal numeric character reference to non-SGML character %1 in literal"
  349   349, "cannot convert character reference to number %1 because description %2 unrecognized"
  350   350, "cannot convert character reference to number %1 because character %2 from baseset %3 unknown"
  351   351, "character reference to number %1 cannot be converted because of problem with internal character set"
  352   352, "cannot convert character reference to number %1 because character not in internal character set"
  353   353, "Web SGML adaptations were used but minimum literal was not ""ISO 8879:1986 (WWW)"""
  354   354, "token %1 can be value for multiple attributes so attribute name required"
  355   355, "length of hex number must not exceed NAMELEN (%1)"
  356   356, "%1 is not a valid name in the declared concrete syntax"
  357   357, "CDATA declared content"
  358   358, "RCDATA declared content"
  359   359, "inclusion"
  360   360, "exclusion"
  361   361, "NUMBER or NUMBERS declared value"
  362   362, "NAME or NAMES declared value"
  363   363, "NUTOKEN or NUTOKENS declared value"
  364   364, "CONREF attribute"
  365   365, "CURRENT attribute"
  366   366, "TEMP marked section"
  367   367, "included marked section in the instance"
  368   368, "ignored marked section in the instance"
  369   369, "RCDATA marked section"
  370   370, "processing instruction entity"
  371   371, "bracketed text entity"
  372   372, "internal CDATA entity"
  373   373, "internal SDATA entity"
  374   374, "external CDATA entity"
  375   375, "external SDATA entity"
  376   376, "attribute definition list declaration for notation"
  377   377, "rank stem"
  378   378, "no system id specified"
  379   379, "comment in parameter separator"
  380   380, "named character reference"
  381   381, "AND group"
  382   382, "attribute value not a literal"
  383   383, "attribute name missing"
  384   384, "element declaration for group of element types"
  385   385, "attribute definition list declaration for group of element types"
  386   386, "empty comment declaration"
  387   387, "S separator in comment declaration"
  388   388, "multiple comments in comment declaration"
  389   389, "no status keyword"
  390   390, "multiple status keywords"
  391   391, "parameter entity reference in document instance"
  392   392, "CURRENT attribute"
  393   393, "element type minimization parameter"
  394   394, "reference not terminated by REFC delimiter"
  395   395, "#PCDATA not first in model group"
  396   396, "#PCDATA in SEQ group"
  397   397, "#PCDATA in nested model group"
  398   398, "#PCDATA in model group that does not have REP occurrence indicator"
  399   399, "name group or name token group used connector other than OR"
  400   400, "processing instruction does not start with name"
  401   401, "S separator in status keyword specification in document instance"
  402   402, "reference to external data entity"
  403   403, "reference to external entity in attribute value"
  404   404, "character %1 is the first character of a delimiter but occurred as data"
  405   405, "SGML declaration was not implied"
  406   406, "marked section in internal DTD subset"
  407   407, "NET-enabling start-tag not immediately followed by null end-tag"
  408   408, "entity end in different element from entity reference"
  409   409, "NETENABL IMMEDNET requires EMPTYNRM YES"
  410   410, "reference to non-SGML character"
  411   411, "declaration of default entity"
  412   412, "reference to parameter entity in parameter separator in internal subset"
  413   413, "reference to parameter entity in token separator in internal subset"
  414   414, "reference to parameter entity in parameter literal in internal subset"
  415   415, "cannot generate system identifier for SGML declaration reference"
  416   416, "public text class of formal public identifier of SGML declaration must be SD"
  417   417, "SGML declaration reference was used but minimum literal was not ""ISO 8879:1986 (WWW)"""
  418   418, "member of model group containing #PCDATA has occurrence indicator"
  419   419, "member of model group containing #PCDATA is a model group"
  420   420, "reference to non-predefined entity"
  421   421, "reference to external entity"
  422   422, "declaration of default entity conflicts with IMPLYDEF ENTITY YES"
  423   423, "parsing with respect to more than one active doctype not supported"
  424   424, "cannot have active doctypes and link types at the same time"
  425   425, "number of concurrent document instances exceeds quantity specified for CONCUR parameter in SGML declaration (%1)"
  426   426, "datatag group can only be specified in base document type"
  427   427, "element not in the base document type can't have an empty start-tag"
  428   428, "element not in base document type can't have an empty end-tag"
  429   429, "immediately recursive element"
  430   430, "invalid URN %1: missing "":"""
  431   431, "invalid URN %1: missing ""urn:"" prefix"
  432   432, "invalid URN %1: invalid namespace identifier"
  433   433, "invalid URN %1: invalid namespace specific string"
  434   434, "invalid URN %1: extra field"
  435   435, "prolog can't be omitted unless CONCUR NO and LINK EXPLICIT NO and either IMPLYDEF ELEMENT YES or IMPLYDEF DOCTYPE YES"
  436   436, "can't determine name of #IMPLIED document element"
  437   437, "can't use #IMPLICIT doctype unless CONCUR NO and LINK EXPLICIT NO"
  438   438, "Sorry, #IMPLIED doctypes not implemented"
  439   439, "reference to DTD data entity ignored"
  440   440, "notation %1 for parameter entity %2 undefined"
  441   441, "notation %1 for external subset undefined"
  442   442, "attribute %1 can't be redeclared"
  443   443, "#IMPLICIT attributes have already been specified for notation %1"
  444   444, "a name group is not allowed in a parameter entity reference in a start tag"
  445   445, "name group in a parameter entity reference in an end tag (SGML forbids them in start tags)"
  446   446, "if the declared value is NOTATION a default value of CONREF is useless"
  447   447, "Sorry, #ALL and #IMPLICIT content tokens not implemented"
  448   1000, "delimiter "
  449   1002, "digit"
  450   1003, "name start character"
  451   1004, "sepchar"
  452   1005, "separator"
  453   1006, "name character"
  454   1007, "data character"
  455   1008, "minimum data character"
  456   1009, "significant character"
  457   1010, "record end character"
  458   1011, "record start character"
  459   1012, "space character"
  460   1013, ", "
  461   1014, "-"
  462   1015, "parameter literal"
  463   1016, "data tag group"
  464   1017, "model group"
  465   1018, "data tag template group"
  466   1019, "name"
  467   1020, "name token"
  468   1021, "element token"
  469   1022, "inclusions"
  470   1023, "exclusions"
  471   1024, "minimum literal"
  472   1025, "attribute value literal"
  473   1026, "system identifier"
  474   1027, "number"
  475   1028, "attribute value"
  476   1029, "name of capacity"
  477   1030, "name of general delimiter role"
  478   1031, "reference reserved name"
  479   1032, "name of quantity"
  480   1033, "entity end"
  481   1034, "short reference delimiter"
  482 END