Representing half of a two-way UDP connection, the UDP receiver can receive data from another peer host or subnet. More...

#include <udp.h>

Inheritance diagram for ost::UDPReceive:

[legend]

Collaboration diagram for ost::UDPReceive:

[legend]

Public Member Functions
ssize_t	receive (void *buf, size_t len)
	Receive a data packet from the connected peer host. More...

bool	isInputReady (timeout_t timeout=TIMEOUT_INF)
	See if input queue has data packets available. More...

Protected Member Functions
	UDPReceive (const ucommon::Socket::address &bind)
	Create a UDP receiver, bind it to a specific interface and port address so that other UDP sockets on remote machines (or the same host) may find and send UDP messages to it, and associate it with a given port on a peer host. More...

	UDPReceive (const IPV4Address &bind, tpport_t port)

Error	connect (const ucommon::Socket::address &host)
	Associate this socket with a specified peer host. More...

Error	connect (const IPV4Host &host, tpport_t port)

bool	isPendingReceive (timeout_t timeout)
	Check for pending data. More...

void	endReceiver (void)
	End receiver. More...

SOCKET	getReceiver (void) const

Error	setRouting (bool enable)

Error	setMulticast (bool enable)

Error	join (const ucommon::Socket::address &ia)

Error	join (const IPV4Multicast &ia)

Error	drop (const IPV4Multicast &ia)

Protected Member Functions inherited from ost::UDPSocket
	UDPSocket (Family family=IPV4)
	Create an unbound UDP socket, mostly for internal use. More...

	UDPSocket (const char *name, Family family=IPV4)
	Create a UDP socket bound by a service name. More...

	UDPSocket (const ucommon::Socket::address &bind)
	Create a UDP socket and bind it to a specific interface and port address so that other UDP sockets on remote machines (or the same host) may find and send UDP messages to it. More...

	UDPSocket (const IPV4Address &bind, tpport_t port)

virtual	~UDPSocket ()
	Destroy a UDP socket as a socket. More...

Error	setLoopback (bool enable)
	Set the loopback. More...

Error	setMulticast (bool enable)
	Set the multicast. More...

Error	setTimeToLive (char ttl)
	Set time to live. More...

void	setPeer (const ucommon::Socket::address &host)
	set the peer address to send message packets to. More...

void	connect (const ucommon::Socket::address &host)

void	setPeer (const IPV4Host &host, tpport_t port)

void	connect (const IPV4Host &host, tpport_t port)

Socket::Error	getInterfaceIndex (const char *ethX, int &InterfaceIndex)
	get the interface index for a named network device More...

Socket::Error	join (const ucommon::Socket::address &ia, int InterfaceIndex=0)
	join a multicast group on a particular interface More...

Socket::Error	join (const IPV4Multicast &ia, int InterfaceIndex)

ssize_t	send (const void *buf, size_t len)
	Send a message packet to a peer host. More...

ssize_t	receive (void *buf, size_t len, bool reply=false)
	Receive a message from any host. More...

ucommon::Socket::address	getPeer ()
	Examine address of sender of next waiting packet. More...

IPV4Host	getIPV4Peer (tpport_t *port=NULL)

IPV4Host	getPeer (tpport_t *port)

ssize_t	peek (void *buf, size_t len)
	Examine contents of next waiting packet. More...

void	setPeer (const char *service)
	Associate socket with a named connection. More...

void	connect (const char *service)

Error	disconnect (void)
	Disassociate this socket from any host connection. More...

Protected Member Functions inherited from ost::Socket
Error	error (Error error, const char *err=NULL, long systemError=0) const
	This service is used to throw all socket errors which usually occur during the socket constructor. More...

void	error (const char *err) const
	This service is used to throw application defined socket errors where the application specific error code is a string. More...

void	setError (bool enable)
	This service is used to turn the error handler on or off for "throwing" exceptions by manipulating the thrown flag. More...

void	endSocket (void)
	Used as the default destructor for ending a socket. More...

Error	connectError (void) const
	Used as a common handler for connection failure processing. More...

Error	sendLimit (int limit=2048)
	Set the send limit. More...

Error	receiveLimit (int limit=1)
	Set thr receive limit. More...

Error	sendTimeout (timeout_t timer)
	Set the send timeout for sending raw network data. More...

Error	receiveTimeout (timeout_t timer)
	Receive timeout for receiving raw network data. More...

Error	sendBuffer (unsigned size)
	Set the protocol stack network kernel send buffer size associated with the socket. More...

Error	receiveBuffer (unsigned size)
	Set the protocol stack network kernel receive buffer size associated with the socket. More...

Error	bufferSize (unsigned size)
	Set the total protocol stack network kernel buffer size for both send and receive together. More...

Error	setBroadcast (bool enable)
	Set the subnet broadcast flag for the socket. More...

Error	setMulticastByFamily (bool enable, Family family=IPV4)
	Setting multicast binds the multicast interface used for the socket to the interface the socket itself has been implicitly bound to. More...

Error	setLoopbackByFamily (bool enable, Family family=IPV4)
	Set the multicast loopback flag for the socket. More...

Error	setTimeToLiveByFamily (uint8_t ttl, Family fam=IPV4)
	Set the multicast time to live for a multicast socket. More...

Error	join (const ucommon::Socket::address &ia, int iface=0)
	Join a multicast group. More...

Error	join (const IPV4Multicast &ia)

Error	drop (const ucommon::Socket::address &ia, int iface=0)
	Drop membership from a multicast group. More...

Error	drop (const IPV4Multicast &ia)

Error	setRouting (bool enable)
	Set the socket routing to indicate if outgoing messages should bypass normal routing (set false). More...

Error	setNoDelay (bool enable)
	Enable/disable delaying packets (Nagle algorithm) More...

	Socket (int domain, int type, int protocol=0)
	An unconnected socket may be created directly on the local machine. More...

	Socket (socket_t fd)
	A socket object may be created from a file descriptor when that descriptor was created either through a socket() or accept() call. More...

	Socket ()
	Create an inactive socket object for base constructors. More...

	Socket (const Socket &source)
	A socket can also be constructed from an already existing Socket object. More...

ssize_t	readLine (char *buf, size_t len, timeout_t timeout=0)
	Process a logical input line from a socket descriptor directly. More...

virtual ssize_t	readData (void *buf, size_t len, char separator=0, timeout_t t=0)
	Read in a block of len bytes with specific separator. More...

virtual ssize_t	writeData (const void *buf, size_t len, timeout_t t=0)
	Write a block of len bytes to socket. More...

	~Socket ()
	Shutdown, close, and destroy socket. More...

Error	getErrorNumber (void) const
	Often used by a "catch" to fetch the last error of a thrown socket. More...

const char *	getErrorString (void) const
	Often used by a "catch" to fetch the user set error string of a thrown socket, but only if EXTENDED error codes are used. More...

long	getSystemError (void) const

const char *	getSystemErrorString (void) const

virtual bool	isPending (Pending pend, timeout_t timeout=TIMEOUT_INF)
	Get the status of pending operations. More...

bool	operator! () const
	Operator based testing to see if a socket is currently active. More...

	operator bool () const

Socket &	operator= (const Socket &from)
	Sockets may also be duplicated by the assignment operator. More...

ucommon::Socket::address	getSender () const
	May be used to examine the origin of data waiting in the socket receive queue. More...

virtual IPV4Host	getIPV4Sender (in_port_t *port=NULL) const

IPV4Host	getSender (in_port_t *port) const

ucommon::Socket::address	getPeer () const
	Get the host address and port of the socket this socket is connected to. More...

IPV4Host	getIPV4Peer (in_port_t *port=NULL) const

IPV4Host	getPeer (in_port_t *port) const

IPV4Host	getIPV4Local (in_port_t *port=NULL) const
	Get the local address and port number this socket is currently bound to. More...

IPV4Host	getLocal (in_port_t *port) const

ucommon::Socket::address	getLocal () const

void	setCompletion (bool immediate)
	Used to specify blocking mode for the socket. More...

Error	setLinger (bool linger)
	Enable lingering sockets on close. More...

Error	setKeepAlive (bool enable)
	Set the keep-alive status of this socket and if keep-alive messages will be sent. More...

Error	setTypeOfService (Tos service)
	Set packet scheduling on platforms which support ip quality of service conventions. More...

bool	isConnected (void) const
	Can test to see if this socket is "connected", and hence whether a "catch" can safely call getPeer(). More...

bool	isActive (void) const
	Test to see if the socket is at least operating or if it is mearly initialized. More...

bool	isBroadcast (void) const
	Return if broadcast has been enabled for the specified socket. More...

bool	isRouted (void) const
	Return if socket routing is enabled. More...

struct in_addr	getaddress (const IPV4Address &ia) const

Protected Member Functions inherited from ucommon::Socket
	Socket ()
	Create a socket object for use. More...

	Socket (const Socket &existing)
	Create socket as duped handle of existing socket. More...

	Socket (socket_t socket)
	Create socket from existing socket descriptor. More...

	Socket (const struct addrinfo *address)
	Create and connect a socket to an address from an address list. More...

	Socket (int family, int type, int protocol=0)
	Create an unbound socket of a specific type. More...

	Socket (const char address, const char port, int family=AF_UNSPEC, int type=0, int protocol=0)
	Create a bound socket. More...

virtual	~Socket ()
	Shutdown, close, and destroy socket. More...

void	cancel (void)
	Cancel pending i/o by shutting down the socket. More...

void	release (void)
	Shutdown and close the socket. More...

int	err (void) const
	Get error code. More...

bool	is_pending (unsigned value)
	See the number of bytes in the receive queue. More...

bool	connected (void) const
	Test if socket is connected. More...

bool	wait (timeout_t timeout=0) const
	Test for pending input data. More...

int	nodelay (void) const
	Set nodelay option for tcp socket. More...

bool	waitSending (timeout_t timeout=0) const
	Test for output data sent. More...

unsigned	pending (void) const
	Get the number of bytes of data in the socket receive buffer. More...

int	broadcast (bool enable)
	Set socket for unicast mode broadcasts. More...

int	keepalive (bool enable)
	Set socket for keepalive packets. More...

int	blocking (bool enable)
	Set socket blocking I/O mode. More...

int	multicast (unsigned ttl=1)
	Set multicast mode and multicast broadcast range. More...

int	loopback (bool enable)
	Set loopback to read multicast packets we broadcast. More...

int	getError (void) const
	Get socket error code. More...

int	ttl (uint8_t time)
	Set the time to live before packets expire. More...

int	sendsize (unsigned size)
	Set the size of the socket send buffer. More...

int	sendwait (unsigned size)
	Set the size to wait before sending. More...

int	recvsize (unsigned size)
	Set the size of the socket receive buffer. More...

int	type (void) const
	Get the type of a socket. More...

unsigned	segsize (unsigned size)
	Set segment size and get mtu of a socket. More...

bool	ccid (uint8_t id)
	Set ccid of dccp socket. More...

int	tos (int type)
	Set the type of service field of outgoing packets. More...

int	priority (int scheduling)
	Set packet priority, 0 to 6 unless privileged. More...

void	shutdown (void)
	Shutdown the socket communication channel. More...

int	connectto (struct addrinfo *list)
	Connect our socket to a remote host from an address list. More...

int	disconnect (void)
	Disconnect a connected socket. More...

int	join (const struct addrinfo *list, const int ifindex=0)
	Join socket to multicast group. More...

int	drop (const struct addrinfo *list, const int ifindex=0)
	Drop socket from multicast group. More...

int	wait (timeout_t timeout=Timer::inf)
	Socket i/o timer setting. More...

size_t	peek (void *data, size_t number) const
	Peek at data waiting in the socket receive buffer. More...

size_t	readfrom (void data, size_t number, struct sockaddr_storage address=NULL)
	Read data from the socket receive buffer. More...

size_t	writeto (const void data, size_t number, const struct sockaddr address=NULL)
	Write data to the socket send buffer. More...

size_t	readline (char *data, size_t size)
	Read a newline of text data from the socket and save in NULL terminated string. More...

size_t	printf (const char *format,...) __PRINTF(2
	Print formatted string to socket. More...

size_t size_t	readline (String &buffer)
	Read a string of input from the socket and strip trailing newline. More...

stringref_t	readline (size_t maxsize)

static ssize_t size_t	writes (const char *string)
	Write a null terminated string to the socket. More...

	operator bool () const
	Test if socket is valid. More...

bool	operator! () const
	Test if socket is invalid. More...

Socket &	operator= (socket_t socket)
	Assign socket from a socket descriptor. More...

	operator socket_t () const
	Get the socket descriptor by casting. More...

socket_t	operator* () const
	Get the socket descriptor by pointer reference. More...

Private Member Functions
	__DELETE_COPY (UDPReceive)

Additional Inherited Members
Protected Types inherited from ost::Socket
enum	State { INITIAL , AVAILABLE , BOUND , CONNECTED , CONNECTING , STREAM }

enum	Family { IPV4 = AF_INET }

enum	Error { errSuccess = 0 , errCreateFailed , errCopyFailed , errInput , errInputInterrupt , errResourceFailure , errOutput , errOutputInterrupt , errNotConnected , errConnectRefused , errConnectRejected , errConnectTimeout , errConnectFailed , errConnectInvalid , errConnectBusy , errConnectNoRoute , errBindingFailed , errBroadcastDenied , errRoutingDenied , errKeepaliveDenied , errServiceDenied , errServiceUnavailable , errMulticastDisabled , errTimeout , errNoDelay , errExtended , errLookupFail , errSearchErr , errInvalidValue }

enum	Tos { tosLowDelay = 0 , tosThroughput , tosReliability , tosMinCost , tosInvalid }

enum	Pending { pendingInput , pendingOutput , pendingError }

typedef enum State	State

typedef enum Family	Family

typedef enum Error	Error

typedef enum Tos	Tos

typedef enum Pending	Pending

Protected Types inherited from ucommon::Socket
typedef struct hostaddr_internet	host_t

typedef cidr	cidr_t

Static Protected Member Functions inherited from ost::Socket
static socket_t	dupSocket (socket_t s, Socket::State state)

static bool	check (Family fam)
	See if a specific protocol family is available in the current runtime environment. More...

Static Protected Member Functions inherited from ucommon::Socket
static struct addrinfo *	query (const char host, const char service, int type=SOCK_STREAM, int protocol=0)
	Get an address list directly. More...

static void	release (struct addrinfo *list)
	Release an address list directly. More...

static void	cancel (socket_t socket)
	Cancel pending i/o by shutting down the socket. More...

static bool	wait (socket_t socket, timeout_t timeout=0)
	Test for pending input data. More...

static int	type (const socket_t socket)
	Get the type of a socket. More...

static unsigned	segsize (socket_t socket, unsigned size=0)
	Set segment size and get MTU. More...

static bool	ccid (socket_t socket, uint8_t id)
	Set congestion control id. More...

static ssize_t	readline (socket_t socket, char *data, size_t size, timeout_t timeout=Timer::inf)
	Read a newline of text data from the socket and save in NULL terminated string. More...

static ssize_t	printf (socket_t socket, const char *format,...) __PRINTF(2
	Print formatted string to socket. More...

static unsigned	pending (socket_t socket)
	Get the number of bytes pending in the receive buffer of a socket descriptor. More...

static int	sendsize (socket_t socket, unsigned size)
	Set the send size of a socket descriptor. More...

static int	sendwait (socket_t socket, unsigned size)
	Set the size to wait before sending. More...

static int	recvsize (socket_t socket, unsigned size)
	Set the receive size of a socket descriptor. More...

static int	connectto (socket_t socket, struct addrinfo *list)
	Connect socket descriptor to a remote host from an address list. More...

static int	disconnect (socket_t socket)
	Disconnect a connected socket descriptor. More...

static int	drop (socket_t socket, const struct addrinfo *list, const int ifindex=0)
	Drop socket descriptor from multicast group. More...

static int	join (socket_t socket, const struct addrinfo *list, const int ifindex=0)
	Join socket descriptor to multicast group. More...

static int	error (const socket_t socket)
	Get socket error code of socket descriptor. More...

static int	multicast (socket_t socket, unsigned ttl=1)
	Set multicast mode and multicast broadcast range for socket descriptor. More...

static int	loopback (socket_t socket, bool enable)
	Set loopback to read multicast packets socket descriptor broadcasts. More...

static int	blocking (socket_t socket, bool enable)
	Set socket blocking I/O mode of socket descriptor. More...

static int	keepalive (socket_t socket, bool enable)
	Set socket for keepalive packets for socket descriptor. More...

static int	broadcast (socket_t socket, bool enable)
	Set socket for unicast mode broadcasts on socket descriptor. More...

static int	nodelay (socket_t socket)
	Set tcp nodelay option on socket descriptor. More...

static int	priority (socket_t socket, int scheduling)
	Set packet priority of socket descriptor. More...

static int	tos (socket_t socket, int type)
	Set type of service of socket descriptor. More...

static int	ttl (socket_t socket, uint8_t time)
	Set the time to live for the socket descriptor. More...

static int	family (socket_t socket)
	Get the address family of the socket descriptor. More...

static int	family (const struct sockaddr_storage &address)
	Get the address family of a socket address object. More...

static int	family (const struct sockaddr_internet &address)
	Get the address family of an internet socket address object. More...

static ssize_t	recvfrom (socket_t socket, void buffer, size_t size, int flags=0, struct sockaddr_storage address=NULL)
	Get data waiting in receive queue. More...

static ssize_t	sendto (socket_t socket, const void buffer, size_t size, int flags=0, const struct sockaddr address=NULL)
	Send data on socket. More...

static ssize_t	replyto (socket_t socket, const void buffer, size_t size, int flags, const struct sockaddr_storage address)
	Send reply on socket. More...

static int	bindto (socket_t socket, const char address, const char service, int protocol=0)
	Bind the socket descriptor to a known interface and service port. More...

static int	listento (socket_t socket, const struct sockaddr *address, int backlog=5)
	Bind the socket descriptor to a known interface listen on service port. More...

static int	bindto (socket_t socket, const struct sockaddr *address)
	Bind the socket descriptor to a known interface. More...

static socket_t	acceptfrom (socket_t socket, struct sockaddr_storage *address=NULL)
	Accept a socket connection from a remote host. More...

static socket_t	create (int family, int type, int protocol)
	Create a socket object unbound. More...

static socket_t	create (const struct addrinfo *address, int type, int protocol)
	Create a connected socket. More...

static socket_t	create (const char iface, const char service, int family=AF_UNSPEC, int type=0, int protocol=0)
	Create a bound socket for a service. More...

static socket_t	create (const Socket::address &address)
	Create a connected socket for a service. More...

static void	release (socket_t socket)
	Release (close) a socket. More...

static char *	hostname (const struct sockaddr address, char buffer, size_t size)
	Lookup and return the host name associated with a socket address. More...

static struct addrinfo *	hinting (socket_t socket, struct addrinfo *hint)
	Create an address info lookup hint based on the family and type properties of a socket descriptor. More...

static socklen_t	query (socket_t socket, struct sockaddr_storage address, const char hostname, const char *service)
	Lookup a host name and service address based on the addressing family and socket type of a socket descriptor. More...

static socklen_t	len (const struct sockaddr *address)
	Get the size of a socket address. More...

static bool	equal (const struct sockaddr address1, const struct sockaddr address2)
	Compare socket addresses. More...

static unsigned	copy (struct sockaddr target, const struct sockaddr origin)
	Copy a socket address. More...

static unsigned	store (struct sockaddr_storage storage, const struct sockaddr address)
	Store an address into an address object. More...

static unsigned	store (struct sockaddr_internet storage, const struct sockaddr address)
	Store an address into an internet address object. More...

static bool	eq_host (const struct sockaddr address1, const struct sockaddr address2)
	Compare socket host addresses. More...

static bool	eq_from (const struct sockaddr_storage address1, const struct sockaddr_storage address2)
	Compare socket addresses. More...

static bool	eq_inet (const struct sockaddr_internet address1, const struct sockaddr_internet address2)
	Compare socket addresses. More...

static bool	eq_subnet (const struct sockaddr address1, const struct sockaddr address2)
	See if both addresses are in the same subnet. More...

static int	via (struct sockaddr address, const struct sockaddr target, socklen_t size=0)
	Get the socket address of the interface needed to reach a destination address. More...

static char *	query (const struct sockaddr address, char buffer, socklen_t size)
	Get the hostname of a socket address. More...

static in_port_t	port (const struct sockaddr *address)
	Get the service port of a socket. More...

static in_port_t	port (const struct sockaddr_internet *address)
	Get the service port of an inet socket. More...

static unsigned	keyindex (const struct sockaddr *address, unsigned size)
	Convert a socket address and service into a hash map index. More...

static unsigned	keyhost (const struct sockaddr *address, unsigned size)
	Convert a socket host address into a hash map index. More...

static void	init (void)
	Initialize socket subsystem. More...

static void	query (int family)
	Set default socket family preference for query options when the socket type is otherwise not specified. More...

static void	v4mapping (bool enable)
	Set the default socket behavior for v6-v4 mapping. More...

static int	error (void)
	Return error code of last socket operation,. More...

static bool	is_null (const char *string)
	Simple function to validate that a given IP address string is a "zero" address. More...

static bool	is_numeric (const char *string)
	Simple function to validate that a given IP address string is a numeric address. More...

static int	local (socket_t socket, struct sockaddr_storage *address)
	Get local address to which the socket is bound. More...

static int	remote (socket_t socket, struct sockaddr_storage *address)
	Get remote address to which the socket is connected. More...

Protected Attributes inherited from ost::UDPSocket
Socket::address	peer

Family	family

Protected Attributes inherited from ost::Socket
struct {
bool thrown: 1

bool broadcast: 1

bool route: 1

bool keepalive: 1

bool loopback: 1

bool multicast: 1

bool completion: 1

bool linger: 1

unsigned ttl: 8

}	flags

State volatile	state

Protected Attributes inherited from ucommon::Socket
socket_t	so

int	ioerr

timeout_t	iowait

Detailed Description

Representing half of a two-way UDP connection, the UDP receiver can receive data from another peer host or subnet.

This class is used exclusivily to derive the UDPDuplex.

Author: David Sugar dyfet.nosp@m.@ost.nosp@m.el.co.nosp@m.m

Unreliable Datagram Peer Associations.

Definition at line 452 of file udp.h.

Constructor & Destructor Documentation

◆ UDPReceive() [1/2]

ost::UDPReceive::UDPReceive ( const ucommon::Socket::address & bind )

protected

Create a UDP receiver, bind it to a specific interface and port address so that other UDP sockets on remote machines (or the same host) may find and send UDP messages to it, and associate it with a given port on a peer host.

On failure to bind, an exception is thrown.

Parameters

bind	address to bind this socket to.

Definition at line 600 of file udp.cpp.

References ost::Socket::sendBuffer(), ucommon::Socket::shutdown(), and ucommon::Socket::so.

Here is the call graph for this function:

◆ UDPReceive() [2/2]

ost::UDPReceive::UDPReceive	(	const IPV4Address &	bind,
		tpport_t	port
	)

protected

Definition at line 607 of file udp.cpp.

References ost::Socket::sendBuffer(), ucommon::Socket::shutdown(), and ucommon::Socket::so.

Here is the call graph for this function:

Member Function Documentation

◆ __DELETE_COPY()

ost::UDPReceive::__DELETE_COPY ( UDPReceive )

private

◆ connect() [1/2]

Socket::Error ost::UDPReceive::connect	(	const IPV4Host &	host,
		tpport_t	port
	)

protected

Definition at line 637 of file udp.cpp.

References connect(), ost::IPV4Address::getAddress(), and port.

Here is the call graph for this function:

◆ connect() [2/2]

Socket::Error ost::UDPReceive::connect ( const ucommon::Socket::address & host )

protected

Associate this socket with a specified peer host.

The port number from the constructor will be used. All UDP packets will be sent received from the specified host.

Returns: 0 on success, -1 on error.

Parameters

host	host network address to connect socket to.
port	host transport port to connect socket to.

Definition at line 623 of file udp.cpp.

References connect(), ost::Socket::connectError(), ost::Socket::errSuccess, ucommon::Socket::address::getLength(), ucommon::Socket::address::isAny(), ucommon::Socket::address::setLoopback(), ost::UDPSocket::setPeer(), and ucommon::Socket::so.

Referenced by connect(), and ost::UDPDuplex::connect().

Here is the call graph for this function:

◆ drop()

Error ost::UDPReceive::drop ( const IPV4Multicast & ia )

inlineprotected

Definition at line 524 of file udp.h.

◆ endReceiver()

void ost::UDPReceive::endReceiver ( void )

inlineprotected

End receiver.

Definition at line 501 of file udp.h.

◆ getReceiver()

SOCKET ost::UDPReceive::getReceiver ( void ) const

inlineprotected

Definition at line 504 of file udp.h.

◆ isInputReady()

bool ost::UDPReceive::isInputReady ( timeout_t timeout = TIMEOUT_INF )

inline

See if input queue has data packets available.

Returns: true if data packets available.

Parameters

timeout in milliseconds.

Definition at line 549 of file udp.h.

References timeout.

◆ isPendingReceive()

bool ost::UDPReceive::isPendingReceive ( timeout_t timeout )

inlineprotected

Check for pending data.

Returns: true if data is waiting.

Parameters

timeout in milliseconds.

Definition at line 494 of file udp.h.

References timeout.

◆ join() [1/2]

Error ost::UDPReceive::join ( const IPV4Multicast & ia )

inlineprotected

Definition at line 516 of file udp.h.

◆ join() [2/2]

Error ost::UDPReceive::join ( const ucommon::Socket::address & ia )

inlineprotected

Definition at line 513 of file udp.h.

◆ receive()

ssize_t ost::UDPReceive::receive	(	void *	buf,
		size_t	len
	)

inline

Receive a data packet from the connected peer host.

Returns: num of bytes actually received.

Parameters

buf	address of data receive buffer.
len	size of data receive buffer.

Definition at line 540 of file udp.h.

◆ setMulticast()

Error ost::UDPReceive::setMulticast ( bool enable )

inlineprotected

Definition at line 510 of file udp.h.

◆ setRouting()

Error ost::UDPReceive::setRouting ( bool enable )

inlineprotected

Definition at line 507 of file udp.h.

The documentation for this class was generated from the following files:

inc/commoncpp/udp.h
commoncpp/udp.cpp

Public Member Functions

Protected Member Functions

Private Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ UDPReceive() [1/2]

◆ UDPReceive() [2/2]

Member Function Documentation

◆ __DELETE_COPY()

◆ connect() [1/2]

◆ connect() [2/2]

◆ drop()

◆ endReceiver()

◆ getReceiver()

◆ isInputReady()

◆ isPendingReceive()

◆ join() [1/2]

◆ join() [2/2]

◆ receive()

◆ setMulticast()

◆ setRouting()