"Fossies" - the Fresh Open Source Software Archive  

Source code changes of the file "build/missing" between
userinfo-2.4.tar.gz and userinfo-2.5.tar.gz

About: userinfo is a console utility to display a variety of information about a local user.

missing  (userinfo-2.4):missing  (userinfo-2.5)
#! /bin/sh #! /bin/sh
# Common stub for a few missing GNU programs while installing. # Common wrapper for a few potentially missing GNU programs.
scriptversion=2012-01-06.13; # UTC scriptversion=2013-10-28.13; # UTC
# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, # Copyright (C) 1996-2013 Free Software Foundation, Inc.
# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc. # Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify # This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by # it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option) # the Free Software Foundation; either version 2, or (at your option)
# any later version. # any later version.
# This program is distributed in the hope that it will be useful, # This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of # but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details. # GNU General Public License for more details.
# You should have received a copy of the GNU General Public License # You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>. # along with this program. If not, see <http://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you # As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a # distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under # configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program. # the same distribution terms that you use for the rest of that program.
if test $# -eq 0; then if test $# -eq 0; then
echo 1>&2 "Try \`$0 --help' for more information" echo 1>&2 "Try '$0 --help' for more information"
exit 1 exit 1
fi fi
run=: case $1 in
sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
# In the cases where this matters, `missing' is being run in the
# srcdir already.
if test -f configure.ac; then
configure_ac=configure.ac
else
configure_ac=configure.in
fi
msg="missing on your system" --is-lightweight)
# Used by our autoconf macros to check whether the available missing
# script is modern enough.
exit 0
;;
case $1 in --run)
# Try to run requested program, and just exit if it succeeds. # Back-compat with the calling convention used by older automake.
run= shift
shift ;;
"$@" && exit 0
# Exit code 63 means version mismatch. This often happens
# when the user try to use an ancient version of a tool on
# a file that requires a minimum version. In this case we
# we should proceed has if the program had been absent, or
# if --run hadn't been passed.
if test $? = 63; then
run=:
msg="probably too old"
fi
;;
-h|--h|--he|--hel|--help) -h|--h|--he|--hel|--help)
echo "\ echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]... $0 [OPTION]... PROGRAM [ARGUMENT]...
Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
error status if there is no known handling for PROGRAM. to PROGRAM being missing or too old.
Options: Options:
-h, --help display this help and exit -h, --help display this help and exit
-v, --version output version information and exit -v, --version output version information and exit
--run try to run the given command, and emulate it if it fails
Supported PROGRAM values: Supported PROGRAM values:
aclocal touch file \`aclocal.m4' aclocal autoconf autoheader autom4te automake makeinfo
autoconf touch file \`configure' bison yacc flex lex help2man
autoheader touch file \`config.h.in'
autom4te touch the output file, or create a stub one
automake touch all \`Makefile.in' files
bison create \`y.tab.[ch]', if possible, from existing .[ch]
flex create \`lex.yy.c', if possible, from existing .c
help2man touch the output file
lex create \`lex.yy.c', if possible, from existing .c
makeinfo touch the output file
yacc create \`y.tab.[ch]', if possible, from existing .[ch]
Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
\`g' are ignored when checking the name. 'g' are ignored when checking the name.
Send bug reports to <bug-automake@gnu.org>." Send bug reports to <bug-automake@gnu.org>."
exit $? exit $?
;; ;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version) -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
echo "missing $scriptversion (GNU Automake)" echo "missing $scriptversion (GNU Automake)"
exit $? exit $?
;; ;;
-*) -*)
echo 1>&2 "$0: Unknown \`$1' option" echo 1>&2 "$0: unknown '$1' option"
echo 1>&2 "Try \`$0 --help' for more information" echo 1>&2 "Try '$0 --help' for more information"
exit 1 exit 1
;; ;;
esac esac
# normalize program name to check for. # Run the given program, remember its exit status.
program=`echo "$1" | sed ' "$@"; st=$?
s/^gnu-//; t
s/^gnu//; t
s/^g//; t'`
# Now exit if we have it, but it failed. Also exit now if we
# don't have it and --version was passed (most likely to detect
# the program). This is about non-GNU programs, so use $1 not
# $program.
case $1 in
lex*|yacc*)
# Not GNU programs, they don't have --version.
;;
*) # If it succeeded, we are done.
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then test $st -eq 0 && exit 0
# We have it, but it failed.
exit 1
elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
# Could not run --version or --help. This is probably someone
# running `$TOOL --version' or `$TOOL --help' to check whether
# $TOOL exists and not knowing $TOOL uses missing.
exit 1
fi
;;
esac
# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
case $program in
aclocal*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`acinclude.m4' or \`${configure_ac}'. You might want
to install the \`Automake' and \`Perl' packages. Grab them from
any GNU archive site."
touch aclocal.m4
;;
autoconf*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`${configure_ac}'. You might want to install the
\`Autoconf' and \`GNU m4' packages. Grab them from any GNU
archive site."
touch configure
;;
autoheader*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`acconfig.h' or \`${configure_ac}'. You might want
to install the \`Autoconf' and \`GNU m4' packages. Grab them
from any GNU archive site."
files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}
`
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
case $f in
*:*) touch_files="$touch_files "`echo "$f" |
sed -e 's/^[^:]*://' -e 's/:.*//'`;;
*) touch_files="$touch_files $f.in";;
esac
done
touch $touch_files
;;
automake*) # Also exit now if we it failed (or wasn't found), and '--version' was
echo 1>&2 "\ # passed; such an option is passed most likely to detect whether the
WARNING: \`$1' is $msg. You should only need it if # program is present and works.
you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. case $2 in --version|--help) exit $st;; esac
You might want to install the \`Automake' and \`Perl' packages.
Grab them from any GNU archive site." # Exit code 63 means version mismatch. This often happens when the user
find . -type f -name Makefile.am -print | # tries to use an ancient version of a tool on a file that requires a
sed 's/\.am$/.in/' | # minimum version.
while read f; do touch "$f"; done if test $st -eq 63; then
;; msg="probably too old"
elif test $st -eq 127; then
autom4te*) # Program was missing.
echo 1>&2 "\ msg="missing on your system"
WARNING: \`$1' is needed, but is $msg. else
You might have modified some files without having the # Program was found and executed, but failed. Give up.
proper tools for further handling them. exit $st
You can get \`$1' as part of \`Autoconf' from any GNU fi
archive site."
file=`echo "$*" | sed -n "$sed_output"`
test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
if test -f "$file"; then
touch $file
else
test -z "$file" || exec >$file
echo "#! /bin/sh"
echo "# Created by GNU Automake missing as a replacement of"
echo "# $ $@"
echo "exit 0"
chmod +x $file
exit 1
fi
;;
bison*|yacc*)
echo 1>&2 "\
WARNING: \`$1' $msg. You should only need it if
you modified a \`.y' file. You may need the \`Bison' package
in order for those modifications to take effect. You can get
\`Bison' from any GNU archive site."
rm -f y.tab.c y.tab.h
if test $# -ne 1; then
eval LASTARG=\${$#}
case $LASTARG in
*.y)
SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
if test -f "$SRCFILE"; then
cp "$SRCFILE" y.tab.c
fi
SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
if test -f "$SRCFILE"; then
cp "$SRCFILE" y.tab.h
fi
;;
esac
fi
if test ! -f y.tab.h; then
echo >y.tab.h
fi
if test ! -f y.tab.c; then
echo 'main() { return 0; }' >y.tab.c
fi
;;
lex*|flex*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a \`.l' file. You may need the \`Flex' package
in order for those modifications to take effect. You can get
\`Flex' from any GNU archive site."
rm -f lex.yy.c
if test $# -ne 1; then
eval LASTARG=\${$#}
case $LASTARG in
*.l)
SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
if test -f "$SRCFILE"; then
cp "$SRCFILE" lex.yy.c
fi
;;
esac
fi
if test ! -f lex.yy.c; then
echo 'main() { return 0; }' >lex.yy.c
fi
;;
help2man*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a dependency of a manual page. You may need the
\`Help2man' package in order for those modifications to take
effect. You can get \`Help2man' from any GNU archive site."
file=`echo "$*" | sed -n "$sed_output"`
test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
if test -f "$file"; then
touch $file
else
test -z "$file" || exec >$file
echo ".ab help2man is required to generate this page"
exit $?
fi
;;
makeinfo*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a \`.texi' or \`.texinfo' file, or any other file
indirectly affecting the aspect of the manual. The spurious
call might also be the consequence of using a buggy \`make' (AIX,
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
# The file to touch is that specified with -o ...
file=`echo "$*" | sed -n "$sed_output"`
test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
if test -z "$file"; then
# ... or it is the one specified with @setfilename ...
infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
file=`sed -n '
/^@setfilename/{
s/.* \([^ ]*\) *$/\1/
p
q
}' $infile`
# ... or it is derived from the source name (dir/f.texi becomes f.info)
test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
fi
# If the file does not exist, the user really needs makeinfo;
# let's fail without touching anything.
test -f $file || exit 1
touch $file
;;
*)
echo 1>&2 "\
WARNING: \`$1' is needed, and is $msg.
You might have modified some files without having the
proper tools for further handling them. Check the \`README' file,
it often tells you about the needed prerequisites for installing
this package. You may also peek at any GNU archive site, in case
some other package would contain this missing \`$1' program."
exit 1
;;
esac
exit 0 perl_URL=http://www.perl.org/
flex_URL=http://flex.sourceforge.net/
gnu_software_URL=http://www.gnu.org/software
program_details ()
{
case $1 in
aclocal|automake)
echo "The '$1' program is part of the GNU Automake package:"
echo "<$gnu_software_URL/automake>"
echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
echo "<$gnu_software_URL/autoconf>"
echo "<$gnu_software_URL/m4/>"
echo "<$perl_URL>"
;;
autoconf|autom4te|autoheader)
echo "The '$1' program is part of the GNU Autoconf package:"
echo "<$gnu_software_URL/autoconf/>"
echo "It also requires GNU m4 and Perl in order to run:"
echo "<$gnu_software_URL/m4/>"
echo "<$perl_URL>"
;;
esac
}
give_advice ()
{
# Normalize program name to check for.
normalized_program=`echo "$1" | sed '
s/^gnu-//; t
s/^gnu//; t
s/^g//; t'`
printf '%s\n' "'$1' is $msg."
configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
case $normalized_program in
autoconf*)
echo "You should only need it if you modified 'configure.ac',"
echo "or m4 files included by it."
program_details 'autoconf'
;;
autoheader*)
echo "You should only need it if you modified 'acconfig.h' or"
echo "$configure_deps."
program_details 'autoheader'
;;
automake*)
echo "You should only need it if you modified 'Makefile.am' or"
echo "$configure_deps."
program_details 'automake'
;;
aclocal*)
echo "You should only need it if you modified 'acinclude.m4' or"
echo "$configure_deps."
program_details 'aclocal'
;;
autom4te*)
echo "You might have modified some maintainer files that require"
echo "the 'autom4te' program to be rebuilt."
program_details 'autom4te'
;;
bison*|yacc*)
echo "You should only need it if you modified a '.y' file."
echo "You may want to install the GNU Bison package:"
echo "<$gnu_software_URL/bison/>"
;;
lex*|flex*)
echo "You should only need it if you modified a '.l' file."
echo "You may want to install the Fast Lexical Analyzer package:"
echo "<$flex_URL>"
;;
help2man*)
echo "You should only need it if you modified a dependency" \
"of a man page."
echo "You may want to install the GNU Help2man package:"
echo "<$gnu_software_URL/help2man/>"
;;
makeinfo*)
echo "You should only need it if you modified a '.texi' file, or"
echo "any other file indirectly affecting the aspect of the manual."
echo "You might want to install the Texinfo package:"
echo "<$gnu_software_URL/texinfo/>"
echo "The spurious makeinfo call might also be the consequence of"
echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
echo "want to install GNU make:"
echo "<$gnu_software_URL/make/>"
;;
*)
echo "You might have modified some files without having the proper"
echo "tools for further handling them. Check the 'README' file, it"
echo "often tells you about the needed prerequisites for installing"
echo "this package. You may also peek at any GNU archive site, in"
echo "case some other package contains this missing '$1' program."
;;
esac
}
give_advice "$1" | sed -e '1s/^/WARNING: /' \
-e '2,$s/^/ /' >&2
# Propagate the correct exit status (expected to be 127 for a program
# not found, 63 for a program that failed due to version mismatch).
exit $st
# Local variables: # Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp) # eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion=" # time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC" # time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC" # time-stamp-end: "; # UTC"
# End: # End:
 End of changes. 16 change blocks. 
264 lines changed or deleted 148 lines changed or added

Home  |  About  |  All  |  Newest  |  Fossies Dox  |  Screenshots  |  Comments  |  Imprint  |  Privacy  |  HTTPS