"Fossies" - the Fresh Open Source Software Archive  

Source code changes of the file "missing" between
scrot-0.8.tar.gz and scrot-1.6.tar.bz2

About: scrot (SCReenshOT) is a simple command line screen capture utility using imlib2 to grab and save images.

missing  (scrot-0.8)	:	missing  (scrot-1.6.tar.bz2)
#! /bin/sh		#! /bin/sh
# Common stub for a few missing GNU programs while installing.		# Common wrapper for a few potentially missing GNU programs.
# Copyright (C) 1996, 1997, 2001, 2002 Free Software Foundation, Inc.
# Franc,ois Pinard <pinard@iro.umontreal.ca>, 1996.		scriptversion=2018-03-07.03; # UTC
		# Copyright (C) 1996-2020 Free Software Foundation, Inc.
		# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify		# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by		# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)		# the Free Software Foundation; either version 2, or (at your option)
# any later version.		# any later version.
# This program is distributed in the hope that it will be useful,		# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of		# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the		# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.		# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License		# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software		# along with this program. If not, see <https://www.gnu.org/licenses/>.
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.		# As a special exception to the GNU General Public License, if you
		# distribute this file as part of a program that contains a
		# configuration script generated by Autoconf, you may include it under
		# the same distribution terms that you use for the rest of that program.
if test $# -eq 0; then		if test $# -eq 0; then
echo 1>&2 "Try \`$0 --help' for more information"		echo 1>&2 "Try '$0 --help' for more information"
exit 1		exit 1
fi		fi
# In the cases where this matters, `missing' is being run in the		case $1 in
# srcdir already.
if test -f configure.in; then
configure_ac=configure.ac
else
configure_ac=configure.in
fi
case "$1" in		--is-lightweight)
		# Used by our autoconf macros to check whether the available missing
		# script is modern enough.
		exit 0
		;;
		--run)
		# Back-compat with the calling convention used by older automake.
		shift
		;;
-h|--h|--he|--hel|--help)		-h|--h|--he|--hel|--help)
echo "\		echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...		$0 [OPTION]... PROGRAM [ARGUMENT]...
Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an		Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
error status if there is no known handling for PROGRAM.		to PROGRAM being missing or too old.
Options:		Options:
-h, --help display this help and exit		-h, --help display this help and exit
-v, --version output version information and exit		-v, --version output version information and exit
Supported PROGRAM values:		Supported PROGRAM values:
aclocal touch file \`aclocal.m4'		aclocal autoconf autoheader autom4te automake makeinfo
autoconf touch file \`configure'		bison yacc flex lex help2man
autoheader touch file \`config.h.in'
automake touch all \`Makefile.in' files		Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
bison create \`y.tab.[ch]', if possible, from existing .[ch]		'g' are ignored when checking the name.
flex create \`lex.yy.c', if possible, from existing .c
lex create \`lex.yy.c', if possible, from existing .c		Send bug reports to <bug-automake@gnu.org>."
makeinfo touch the output file		exit $?
yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
;;		;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)		-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
echo "missing - GNU libit 0.0"		echo "missing $scriptversion (GNU Automake)"
		exit $?
;;		;;
-*)		-*)
echo 1>&2 "$0: Unknown \`$1' option"		echo 1>&2 "$0: unknown '$1' option"
echo 1>&2 "Try \`$0 --help' for more information"		echo 1>&2 "Try '$0 --help' for more information"
exit 1		exit 1
;;		;;
aclocal*)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified \`acinclude.m4' or \`$configure_ac'. You might want
to install the \`Automake' and \`Perl' packages. Grab them from
any GNU archive site."
touch aclocal.m4
;;
autoconf)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified \`$configure_ac'. You might want to install the
\`Autoconf' and \`GNU m4' packages. Grab them from any GNU
archive site."
touch configure
;;
autoheader)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified \`acconfig.h' or \`$configure_ac'. You might want
to install the \`Autoconf' and \`GNU m4' packages. Grab them
from any GNU archive site."
files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' $configure_ac`
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
case "$f" in
*:*) touch_files="$touch_files "`echo "$f" |
sed -e 's/^[^:]*://' -e 's/:.*//'`;;
*) touch_files="$touch_files $f.in";;
esac
done
touch $touch_files
;;
automake*)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified \`Makefile.am', \`acinclude.m4' or \`$configure_ac'.
You might want to install the \`Automake' and \`Perl' packages.
Grab them from any GNU archive site."
find . -type f -name Makefile.am -print |
sed 's/\.am$/.in/' |
while read f; do touch "$f"; done
;;
bison|yacc)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a \`.y' file. You may need the \`Bison' package
in order for those modifications to take effect. You can get
\`Bison' from any GNU archive site."
rm -f y.tab.c y.tab.h
if [ $# -ne 1 ]; then
eval LASTARG="\${$#}"
case "$LASTARG" in
*.y)
SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" y.tab.c
fi
SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" y.tab.h
fi
;;
esac
fi
if [ ! -f y.tab.h ]; then
echo >y.tab.h
fi
if [ ! -f y.tab.c ]; then
echo 'main() { return 0; }' >y.tab.c
fi
;;
lex|flex)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a \`.l' file. You may need the \`Flex' package
in order for those modifications to take effect. You can get
\`Flex' from any GNU archive site."
rm -f lex.yy.c
if [ $# -ne 1 ]; then
eval LASTARG="\${$#}"
case "$LASTARG" in
*.l)
SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" lex.yy.c
fi
;;
esac
fi
if [ ! -f lex.yy.c ]; then
echo 'main() { return 0; }' >lex.yy.c
fi
;;
makeinfo)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a \`.texi' or \`.texinfo' file, or any other file
indirectly affecting the aspect of the manual. The spurious
call might also be the consequence of using a buggy \`make' (AIX,
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
if test -z "$file"; then
file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
fi
touch $file
;;
*)
echo 1>&2 "\
WARNING: \`$1' is needed, and you do not seem to have it handy on your
system. You might have modified some files without having the
proper tools for further handling them. Check the \`README' file,
it often tells you about the needed prerequirements for installing
this package. You may also peek at any GNU archive site, in case
some other package would contain this missing \`$1' program."
exit 1
;;
esac		esac
exit 0		# Run the given program, remember its exit status.
		"$@"; st=$?
		# If it succeeded, we are done.
		test $st -eq 0 && exit 0
		# Also exit now if we it failed (or wasn't found), and '--version' was
		# passed; such an option is passed most likely to detect whether the
		# program is present and works.
		case $2 in --version|--help) exit $st;; esac
		# Exit code 63 means version mismatch. This often happens when the user
		# tries to use an ancient version of a tool on a file that requires a
		# minimum version.
		if test $st -eq 63; then
		msg="probably too old"
		elif test $st -eq 127; then
		# Program was missing.
		msg="missing on your system"
		else
		# Program was found and executed, but failed. Give up.
		exit $st
		fi
		perl_URL=https://www.perl.org/
		flex_URL=https://github.com/westes/flex
		gnu_software_URL=https://www.gnu.org/software
		program_details ()
		{
		case $1 in
		aclocal|automake)
		echo "The '$1' program is part of the GNU Automake package:"
		echo "<$gnu_software_URL/automake>"
		echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
		echo "<$gnu_software_URL/autoconf>"
		echo "<$gnu_software_URL/m4/>"
		echo "<$perl_URL>"
		;;
		autoconf|autom4te|autoheader)
		echo "The '$1' program is part of the GNU Autoconf package:"
		echo "<$gnu_software_URL/autoconf/>"
		echo "It also requires GNU m4 and Perl in order to run:"
		echo "<$gnu_software_URL/m4/>"
		echo "<$perl_URL>"
		;;
		esac
		}
		give_advice ()
		{
		# Normalize program name to check for.
		normalized_program=`echo "$1" | sed '
		s/^gnu-//; t
		s/^gnu//; t
		s/^g//; t'`
		printf '%s\n' "'$1' is $msg."
		configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
		case $normalized_program in
		autoconf*)
		echo "You should only need it if you modified 'configure.ac',"
		echo "or m4 files included by it."
		program_details 'autoconf'
		;;
		autoheader*)
		echo "You should only need it if you modified 'acconfig.h' or"
		echo "$configure_deps."
		program_details 'autoheader'
		;;
		automake*)
		echo "You should only need it if you modified 'Makefile.am' or"
		echo "$configure_deps."
		program_details 'automake'
		;;
		aclocal*)
		echo "You should only need it if you modified 'acinclude.m4' or"
		echo "$configure_deps."
		program_details 'aclocal'
		;;
		autom4te*)
		echo "You might have modified some maintainer files that require"
		echo "the 'autom4te' program to be rebuilt."
		program_details 'autom4te'
		;;
		bison*|yacc*)
		echo "You should only need it if you modified a '.y' file."
		echo "You may want to install the GNU Bison package:"
		echo "<$gnu_software_URL/bison/>"
		;;
		lex*|flex*)
		echo "You should only need it if you modified a '.l' file."
		echo "You may want to install the Fast Lexical Analyzer package:"
		echo "<$flex_URL>"
		;;
		help2man*)
		echo "You should only need it if you modified a dependency" \
		"of a man page."
		echo "You may want to install the GNU Help2man package:"
		echo "<$gnu_software_URL/help2man/>"
		;;
		makeinfo*)
		echo "You should only need it if you modified a '.texi' file, or"
		echo "any other file indirectly affecting the aspect of the manual."
		echo "You might want to install the Texinfo package:"
		echo "<$gnu_software_URL/texinfo/>"
		echo "The spurious makeinfo call might also be the consequence of"
		echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
		echo "want to install GNU make:"
		echo "<$gnu_software_URL/make/>"
		;;
		*)
		echo "You might have modified some files without having the proper"
		echo "tools for further handling them. Check the 'README' file, it"
		echo "often tells you about the needed prerequisites for installing"
		echo "this package. You may also peek at any GNU archive site, in"
		echo "case some other package contains this missing '$1' program."
		;;
		esac
		}
		give_advice "$1" | sed -e '1s/^/WARNING: /' \
		-e '2,$s/^/ /' >&2
		# Propagate the correct exit status (expected to be 127 for a program
		# not found, 63 for a program that failed due to version mismatch).
		exit $st
		# Local variables:
		# eval: (add-hook 'before-save-hook 'time-stamp)
		# time-stamp-start: "scriptversion="
		# time-stamp-format: "%:y-%02m-%02d.%02H"
		# time-stamp-time-zone: "UTC0"
		# time-stamp-end: "; # UTC"
		# End:
End of changes. 11 change blocks.
156 lines changed or deleted		38 lines changed or added

---