"Fossies" - the Fresh Open Source Software Archive  

Source code changes of the file "README.configure" between
rxvt-unicode-9.26.tar.bz2 and rxvt-unicode-9.29.tar.bz2

About: rxvt-unicode is a clone of the terminal emulator rxvt.

README.configure  (rxvt-unicode-9.26.tar.bz2):README.configure  (rxvt-unicode-9.29.tar.bz2)
skipping to change at line 52 skipping to change at line 52
zh_ext rarely used but very big chinese encodings zh_ext rarely used but very big chinese encodings
jp common japanese encodings jp common japanese encodings
jp_ext rarely used but big japanese encodings jp_ext rarely used but big japanese encodings
kr korean encodings kr korean encodings
--enable-xim (default: on) --enable-xim (default: on)
Add support for XIM (X Input Method) protocol. This allows using Add support for XIM (X Input Method) protocol. This allows using
alternative input methods (e.g. kinput2) and will also correctly set alternative input methods (e.g. kinput2) and will also correctly set
up the input for people using dead keys or compose keys. up the input for people using dead keys or compose keys.
--enable-unicode3 (default: off) --enable-unicode3 (default: off)
Recommended to stay off unless you really need non-BMP characters. Recommended to stay off unless you really need a lot of non-BMP
characters.
Enable direct support for displaying unicode codepoints above 65535 Enable support for direct storage of unicode characters above 65535
(the basic multilingual page). This increases storage requirements (the basic multilingual page). This increases storage requirements
per character from 2 to 4 bytes. X11 fonts do not yet support these per character from 2 to 4 bytes. X11 fonts do not yet support these
extra characters, but Xft does. extra characters, but Xft does.
Please note that rxvt-unicode can store unicode code points >65535 Please note that rxvt-unicode can store and display unicode
even without this flag, but the number of such characters is limited characters above 65535 even without this flag, but the number of
to a few thousand (shared with combining characters, see next such characters is limited to a few thousand (shared with combining
switch), and right now rxvt-unicode cannot display them characters, see next switch).
(input/output and cut&paste still work, though).
--enable-combining (default: on) --enable-combining (default: on)
Enable automatic composition of combining characters into composite Enable automatic composition of combining characters into composite
characters. This is required for proper viewing of text where characters. This is required for proper viewing of text where
accents are encoded as separate unicode characters. This is done by accents are encoded as separate unicode characters. This is done by
using precomposed characters when available or creating new using precomposed characters when available or creating new
pseudo-characters when no precomposed form exists. pseudo-characters when no precomposed form exists.
Without --enable-unicode3, the number of additional precomposed Without --enable-unicode3, the number of additional precomposed
characters is somewhat limited (the 6400 private use characters will characters is somewhat limited (the 6400 private use characters will
skipping to change at line 95 skipping to change at line 95
To disable resource fallback use --disable-fallback. To disable resource fallback use --disable-fallback.
--with-res-name=NAME (default: urxvt) --with-res-name=NAME (default: urxvt)
Use the given name as default application name when reading Use the given name as default application name when reading
resources. Specify --with-res-name=rxvt to replace rxvt. resources. Specify --with-res-name=rxvt to replace rxvt.
--with-res-class=CLASS (default: URxvt) --with-res-class=CLASS (default: URxvt)
Use the given class as default application class when reading Use the given class as default application class when reading
resources. Specify --with-res-class=Rxvt to replace rxvt. resources. Specify --with-res-class=Rxvt to replace rxvt.
--enable-utmp (default: on)
Write user and tty to utmp file (used by programs like w) at start
of rxvt execution and delete information when rxvt exits.
--enable-wtmp (default: on)
Write user and tty to wtmp file (used by programs like last) at
start of rxvt execution and write logout when rxvt exits. This
option requires --enable-utmp to also be specified.
--enable-lastlog (default: on)
Write user and tty to lastlog file (used by programs like lastlogin)
at start of rxvt execution. This option requires --enable-utmp to
also be specified.
--enable-pixbuf (default: on) --enable-pixbuf (default: on)
Add support for GDK-PixBuf to be used for background images. It adds Add support for GDK-PixBuf to be used for background images. It adds
support for many file formats including JPG, PNG, TIFF, GIF, XPM, support for many file formats including JPG, PNG, TIFF, GIF, XPM,
BMP, ICO and TGA. BMP, ICO and TGA.
--enable-startup-notification (default: on) --enable-startup-notification (default: on)
Add support for freedesktop startup notifications. This allows Add support for freedesktop startup notifications. This allows
window managers to display some kind of progress indicator during window managers to display some kind of progress indicator during
startup. startup.
skipping to change at line 180 skipping to change at line 166
XEmbed support (-embed) XEmbed support (-embed)
user-pty (-pty-fd) user-pty (-pty-fd)
hold on exit (-hold) hold on exit (-hold)
compile in built-in block graphics compile in built-in block graphics
skip builtin block graphics (-sbg) skip builtin block graphics (-sbg)
separate highlight colour (-highlightColor, -highlightTextColor) separate highlight colour (-highlightColor, -highlightTextColor)
focus reporting mode (1004). focus reporting mode (1004).
extended mouse reporting modes (1005, 1006 and 1015). extended mouse reporting modes (1005, 1006 and 1015).
visual selection via -visual and -depth. visual selection via -visual and -depth.
systemd socket activation systemd socket activation
selectable rewrapmode
bracketed paste mode
It also enables some non-essential features otherwise disabled, such It also enables some non-essential features otherwise disabled, such
as: as:
some round-trip time optimisations some round-trip time optimisations
nearest colour allocation on pseudocolor screens nearest colour allocation on pseudocolor screens
UTF8_STRING support for selection UTF8_STRING support for selection
sgr modes 90..97 and 100..107 sgr modes 90..97 and 100..107
backindex and forwardindex escape sequences backindex and forwardindex escape sequences
view change/zero scrollback escape sequences view change/zero scrollback escape sequences
locale switching escape sequence locale switching escape sequence
window op and some xterm/OSC escape sequences window op and some xterm/OSC escape sequences
rectangular selections rectangular selections
trailing space removal for selections trailing space removal for selections
verbose X error handling verbose X error handling
--enable-iso14755 (default: on) --enable-iso14755 (default: on)
Enable extended ISO 14755 support (see urxvt(1)). Basic support Enable extended ISO 14755 support (see rxvt(1)). Basic support
(section 5.1) is enabled by "--enable-frills", while support for (section 5.1) is enabled by "--enable-frills", while support for
5.2, 5.3 and 5.4 is enabled with this switch. 5.2, 5.3 and 5.4 is enabled with this switch.
--enable-keepscrolling (default: on) --enable-keepscrolling (default: on)
Add support for continual scrolling of the display when you hold the Add support for continual scrolling of the display when you hold the
mouse button down on a scrollbar arrow. mouse button down on a scrollbar arrow.
--enable-selectionscrolling (default: on) --enable-selectionscrolling (default: on)
Add support for scrolling when the selection moves to the top or Add support for scrolling when the selection moves to the top or
bottom of the screen. bottom of the screen.
skipping to change at line 229 skipping to change at line 217
the window corner which is closest to a corner of the screen in a the window corner which is closest to a corner of the screen in a
fixed position. fixed position.
--enable-text-blink (default: on) --enable-text-blink (default: on)
Add support for blinking text. Add support for blinking text.
--enable-pointer-blank (default: on) --enable-pointer-blank (default: on)
Add support to have the pointer disappear when typing or inactive. Add support to have the pointer disappear when typing or inactive.
--enable-perl (default: on) --enable-perl (default: on)
Enable an embedded perl interpreter. See the urxvtperl(3) manpage Enable an embedded perl interpreter. See the rxvtperl(3) manpage for
for more info on this feature, or the files in src/perl/ for the more info on this feature, or the files in src/perl/ for the
extensions that are installed by default. The perl interpreter that extensions that are installed by default. The perl interpreter that
is used can be specified via the "PERL" environment variable when is used can be specified via the "PERL" environment variable when
running configure. Even when compiled in, perl will *not* be running configure. Even when compiled in, perl will *not* be
initialised when all extensions have been disabled "-pe "" initialised when all extensions have been disabled "-pe ""
--perl-ext-common """, so it should be safe to enable from a --perl-ext-common """, so it should be safe to enable from a
resource standpoint. resource standpoint.
--enable-assert (default: off) --enable-assert (default: off)
Enables the assertions in the code, normally disabled. This switch Enables the assertions in the code, normally disabled. This switch
is only useful when developing rxvt-unicode. is only useful when developing rxvt-unicode.
skipping to change at line 252 skipping to change at line 240
--enable-256-color (default: off) --enable-256-color (default: off)
Force use of so-called 256 colour mode, to work around buggy Force use of so-called 256 colour mode, to work around buggy
applications that do not support termcap/terminfo, or simply improve applications that do not support termcap/terminfo, or simply improve
support for applications hardcoding the xterm 256 colour table. support for applications hardcoding the xterm 256 colour table.
This switch breaks termcap/terminfo compatibility to This switch breaks termcap/terminfo compatibility to
"TERM=rxvt-unicode", and consequently sets "TERM" to "TERM=rxvt-unicode", and consequently sets "TERM" to
"rxvt-unicode-256color" by default (doc/etc/ contains "rxvt-unicode-256color" by default (doc/etc/ contains
termcap/terminfo definitions for both). termcap/terminfo definitions for both).
It also results in higher memory usage and can slow down urxvt It also results in higher memory usage and can slow down rxvt
dramatically when more than six fonts are in use by a terminal dramatically when more than six fonts are in use by a terminal
instance. instance.
--with-name=NAME (default: urxvt) --with-name=NAME (default: urxvt)
Set the basename for the installed binaries, resulting in "urxvt", Set the basename for the installed binaries, resulting in "urxvt",
"urxvtd" etc.). Specify "--with-name=rxvt" to replace with "rxvt". "urxvtd" etc.). Specify "--with-name=rxvt" to replace with "rxvt".
--with-term=NAME (default: rxvt-unicode) --with-term=NAME (default: rxvt-unicode)
Change the environmental variable for the terminal to NAME. Sets the default "TERM" value that rxvt sets. The default is either
"rxvt-unicode" or "rxvt-unicode-256color", as appropriate.
--with-terminfo=PATH --with-terminfo=PATH
Change the environmental variable for the path to the terminfo tree If set, rxvt will set the environment variable "TERMINFO" to the
to PATH. given PATH, which can be useful as a last resort if installing the
terminfo entries system-wide is not possible.
--with-x --with-x
Use the X Window System (pretty much default, eh?). Use the X Window System (pretty much default, eh?).
 End of changes. 10 change blocks. 
28 lines changed or deleted 18 lines changed or added

Home  |  About  |  Features  |  All  |  Newest  |  Dox  |  Diffs  |  RSS Feeds  |  Screenshots  |  Comments  |  Imprint  |  Privacy  |  HTTP(S)