"Fossies" - the Fresh Open Source Software Archive  

Source code changes of the file "install-sh" between
klavaro-3.12.tar.bz2 and klavaro-3.13.tar.bz2

About: Klavaro is a touch typing tutor program.

install-sh  (klavaro-3.12.tar.bz2):install-sh  (klavaro-3.13.tar.bz2)
#!/bin/sh #!/bin/sh
# install - install a program, script, or datafile # install - install a program, script, or datafile
scriptversion=2011-11-20.07; # UTC scriptversion=2020-11-14.01; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was # This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the # later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license. # following copyright and license.
# #
# Copyright (C) 1994 X Consortium # Copyright (C) 1994 X Consortium
# #
# Permission is hereby granted, free of charge, to any person obtaining a copy # Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to # of this software and associated documentation files (the "Software"), to
# deal in the Software without restriction, including without limitation the # deal in the Software without restriction, including without limitation the
skipping to change at line 44 skipping to change at line 44
# #
# FSF changes to this file are in the public domain. # FSF changes to this file are in the public domain.
# #
# Calling this script install-sh is preferred over install.sh, to prevent # Calling this script install-sh is preferred over install.sh, to prevent
# 'make' implicit rules from creating a file called install from it # 'make' implicit rules from creating a file called install from it
# when there is no Makefile. # when there is no Makefile.
# #
# This script is compatible with the BSD install script, but was written # This script is compatible with the BSD install script, but was written
# from scratch. # from scratch.
tab=' '
nl=' nl='
' '
IFS=" "" $nl" IFS=" $tab$nl"
# set DOITPROG to echo to test this script # Set DOITPROG to "echo" to test this script.
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit=${DOITPROG-} doit=${DOITPROG-}
if test -z "$doit"; then doit_exec=${doit:-exec}
doit_exec=exec
else
doit_exec=$doit
fi
# Put in absolute file names if you don't have them in your path; # Put in absolute file names if you don't have them in your path;
# or use environment vars. # or use environment vars.
chgrpprog=${CHGRPPROG-chgrp} chgrpprog=${CHGRPPROG-chgrp}
chmodprog=${CHMODPROG-chmod} chmodprog=${CHMODPROG-chmod}
chownprog=${CHOWNPROG-chown} chownprog=${CHOWNPROG-chown}
cmpprog=${CMPPROG-cmp} cmpprog=${CMPPROG-cmp}
cpprog=${CPPROG-cp} cpprog=${CPPROG-cp}
mkdirprog=${MKDIRPROG-mkdir} mkdirprog=${MKDIRPROG-mkdir}
mvprog=${MVPROG-mv} mvprog=${MVPROG-mv}
rmprog=${RMPROG-rm} rmprog=${RMPROG-rm}
stripprog=${STRIPPROG-strip} stripprog=${STRIPPROG-strip}
posix_glob='?'
initialize_posix_glob='
test "$posix_glob" != "?" || {
if (set -f) 2>/dev/null; then
posix_glob=
else
posix_glob=:
fi
}
'
posix_mkdir= posix_mkdir=
# Desired mode of installed file. # Desired mode of installed file.
mode=0755 mode=0755
# Create dirs (including intermediate dirs) using mode 755.
# This is like GNU 'install' as of coreutils 8.32 (2020).
mkdir_umask=22
backupsuffix=
chgrpcmd= chgrpcmd=
chmodcmd=$chmodprog chmodcmd=$chmodprog
chowncmd= chowncmd=
mvcmd=$mvprog mvcmd=$mvprog
rmcmd="$rmprog -f" rmcmd="$rmprog -f"
stripcmd= stripcmd=
src= src=
dst= dst=
dir_arg= dir_arg=
dst_arg= dst_arg=
copy_on_change=false copy_on_change=false
no_target_directory= is_target_a_directory=possibly
usage="\ usage="\
Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
or: $0 [OPTION]... SRCFILES... DIRECTORY or: $0 [OPTION]... SRCFILES... DIRECTORY
or: $0 [OPTION]... -t DIRECTORY SRCFILES... or: $0 [OPTION]... -t DIRECTORY SRCFILES...
or: $0 [OPTION]... -d DIRECTORIES... or: $0 [OPTION]... -d DIRECTORIES...
In the 1st form, copy SRCFILE to DSTFILE. In the 1st form, copy SRCFILE to DSTFILE.
In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
In the 4th, create DIRECTORIES. In the 4th, create DIRECTORIES.
Options: Options:
--help display this help and exit. --help display this help and exit.
--version display version info and exit. --version display version info and exit.
-c (ignored) -c (ignored)
-C install only if different (preserve the last data modification t ime) -C install only if different (preserve data modification time)
-d create directories instead of installing files. -d create directories instead of installing files.
-g GROUP $chgrpprog installed files to GROUP. -g GROUP $chgrpprog installed files to GROUP.
-m MODE $chmodprog installed files to MODE. -m MODE $chmodprog installed files to MODE.
-o USER $chownprog installed files to USER. -o USER $chownprog installed files to USER.
-p pass -p to $cpprog.
-s $stripprog installed files. -s $stripprog installed files.
-S SUFFIX attempt to back up existing files, with suffix SUFFIX.
-t DIRECTORY install into DIRECTORY. -t DIRECTORY install into DIRECTORY.
-T report an error if DSTFILE is a directory. -T report an error if DSTFILE is a directory.
Environment variables override the default commands: Environment variables override the default commands:
CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
RMPROG STRIPPROG RMPROG STRIPPROG
By default, rm is invoked with -f; when overridden with RMPROG,
it's up to you to specify -f if you want it.
If -S is not specified, no backups are attempted.
Email bug reports to bug-automake@gnu.org.
Automake home page: https://www.gnu.org/software/automake/
" "
while test $# -ne 0; do while test $# -ne 0; do
case $1 in case $1 in
-c) ;; -c) ;;
-C) copy_on_change=true;; -C) copy_on_change=true;;
-d) dir_arg=true;; -d) dir_arg=true;;
-g) chgrpcmd="$chgrpprog $2" -g) chgrpcmd="$chgrpprog $2"
shift;; shift;;
--help) echo "$usage"; exit $?;; --help) echo "$usage"; exit $?;;
-m) mode=$2 -m) mode=$2
case $mode in case $mode in
*' '* | *' '* | *' *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
'* | *'*'* | *'?'* | *'['*) echo "$0: invalid mode: $mode" >&2
echo "$0: invalid mode: $mode" >&2 exit 1;;
exit 1;; esac
esac shift;;
shift;;
-o) chowncmd="$chownprog $2" -o) chowncmd="$chownprog $2"
shift;; shift;;
-p) cpprog="$cpprog -p";;
-s) stripcmd=$stripprog;; -s) stripcmd=$stripprog;;
-t) dst_arg=$2 -S) backupsuffix="$2"
# Protect names problematic for 'test' and other utilities. shift;;
case $dst_arg in
-* | [=\(\)!]) dst_arg=./$dst_arg;;
esac
shift;;
-T) no_target_directory=true;; -t)
is_target_a_directory=always
dst_arg=$2
# Protect names problematic for 'test' and other utilities.
case $dst_arg in
-* | [=\(\)!]) dst_arg=./$dst_arg;;
esac
shift;;
-T) is_target_a_directory=never;;
--version) echo "$0 $scriptversion"; exit $?;; --version) echo "$0 $scriptversion"; exit $?;;
--) shift --) shift
break;; break;;
-*) echo "$0: invalid option: $1" >&2 -*) echo "$0: invalid option: $1" >&2
exit 1;; exit 1;;
*) break;; *) break;;
esac esac
shift shift
done done
# We allow the use of options -d and -T together, by making -d
# take the precedence; this is for compatibility with GNU install.
if test -n "$dir_arg"; then
if test -n "$dst_arg"; then
echo "$0: target directory not allowed when installing a directory." >&2
exit 1
fi
fi
if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
# When -d is used, all remaining arguments are directories to create. # When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified. # When -t is used, the destination is already specified.
# Otherwise, the last argument is the destination. Remove it from $@. # Otherwise, the last argument is the destination. Remove it from $@.
for arg for arg
do do
if test -n "$dst_arg"; then if test -n "$dst_arg"; then
# $@ is not empty: it contains at least $arg. # $@ is not empty: it contains at least $arg.
set fnord "$@" "$dst_arg" set fnord "$@" "$dst_arg"
shift # fnord shift # fnord
skipping to change at line 211 skipping to change at line 227
if test -z "$dir_arg"; then if test -z "$dir_arg"; then
echo "$0: no input file specified." >&2 echo "$0: no input file specified." >&2
exit 1 exit 1
fi fi
# It's OK to call 'install-sh -d' without argument. # It's OK to call 'install-sh -d' without argument.
# This can happen when creating conditional directories. # This can happen when creating conditional directories.
exit 0 exit 0
fi fi
if test -z "$dir_arg"; then if test -z "$dir_arg"; then
if test $# -gt 1 || test "$is_target_a_directory" = always; then
if test ! -d "$dst_arg"; then
echo "$0: $dst_arg: Is not a directory." >&2
exit 1
fi
fi
fi
if test -z "$dir_arg"; then
do_exit='(exit $ret); exit $ret' do_exit='(exit $ret); exit $ret'
trap "ret=129; $do_exit" 1 trap "ret=129; $do_exit" 1
trap "ret=130; $do_exit" 2 trap "ret=130; $do_exit" 2
trap "ret=141; $do_exit" 13 trap "ret=141; $do_exit" 13
trap "ret=143; $do_exit" 15 trap "ret=143; $do_exit" 15
# Set umask so as not to create temps with too-generous modes. # Set umask so as not to create temps with too-generous modes.
# However, 'strip' requires both read and write access to temps. # However, 'strip' requires both read and write access to temps.
case $mode in case $mode in
# Optimize common cases. # Optimize common cases.
*644) cp_umask=133;; *644) cp_umask=133;;
*755) cp_umask=22;; *755) cp_umask=22;;
*[0-7]) *[0-7])
if test -z "$stripcmd"; then if test -z "$stripcmd"; then
u_plus_rw= u_plus_rw=
else else
u_plus_rw='% 200' u_plus_rw='% 200'
fi fi
cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
*) *)
if test -z "$stripcmd"; then if test -z "$stripcmd"; then
u_plus_rw= u_plus_rw=
else else
u_plus_rw=,u+rw u_plus_rw=,u+rw
fi fi
cp_umask=$mode$u_plus_rw;; cp_umask=$mode$u_plus_rw;;
esac esac
fi fi
for src for src
do do
# Protect names problematic for 'test' and other utilities. # Protect names problematic for 'test' and other utilities.
case $src in case $src in
-* | [=\(\)!]) src=./$src;; -* | [=\(\)!]) src=./$src;;
esac esac
if test -n "$dir_arg"; then if test -n "$dir_arg"; then
dst=$src dst=$src
dstdir=$dst dstdir=$dst
test -d "$dstdir" test -d "$dstdir"
dstdir_status=$? dstdir_status=$?
# Don't chown directories that already exist.
if test $dstdir_status = 0; then
chowncmd=""
fi
else else
# Waiting for this to be detected by the "$cpprog $src $dsttmp" command # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
# might cause directories to be created, which would be especially bad # might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'. # if $src (and thus $dsttmp) contains '*'.
if test ! -f "$src" && test ! -d "$src"; then if test ! -f "$src" && test ! -d "$src"; then
echo "$0: $src does not exist." >&2 echo "$0: $src does not exist." >&2
exit 1 exit 1
fi fi
if test -z "$dst_arg"; then if test -z "$dst_arg"; then
echo "$0: no destination specified." >&2 echo "$0: no destination specified." >&2
exit 1 exit 1
fi fi
dst=$dst_arg dst=$dst_arg
# If destination is a directory, append the input filename; won't work # If destination is a directory, append the input filename.
# if double slashes aren't ignored.
if test -d "$dst"; then if test -d "$dst"; then
if test -n "$no_target_directory"; then if test "$is_target_a_directory" = never; then
echo "$0: $dst_arg: Is a directory" >&2 echo "$0: $dst_arg: Is a directory" >&2
exit 1 exit 1
fi fi
dstdir=$dst dstdir=$dst
dst=$dstdir/`basename "$src"` dstbase=`basename "$src"`
case $dst in
*/) dst=$dst$dstbase;;
*) dst=$dst/$dstbase;;
esac
dstdir_status=0 dstdir_status=0
else else
# Prefer dirname, but fall back on a substitute if dirname fails. dstdir=`dirname "$dst"`
dstdir=`
(dirname "$dst") 2>/dev/null ||
expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$dst" : 'X\(//\)[^/]' \| \
X"$dst" : 'X\(//\)$' \| \
X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$dst" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'
`
test -d "$dstdir" test -d "$dstdir"
dstdir_status=$? dstdir_status=$?
fi fi
fi fi
case $dstdir in
*/) dstdirslash=$dstdir;;
*) dstdirslash=$dstdir/;;
esac
obsolete_mkdir_used=false obsolete_mkdir_used=false
if test $dstdir_status != 0; then if test $dstdir_status != 0; then
case $posix_mkdir in case $posix_mkdir in
'') '')
# Create intermediate dirs using mode 755 as modified by the umask. # With -d, create the new directory with the user-specified mode.
# This is like FreeBSD 'install' as of 1997-10-28. # Otherwise, rely on $mkdir_umask.
umask=`umask` if test -n "$dir_arg"; then
case $stripcmd.$umask in mkdir_mode=-m$mode
# Optimize common cases. else
*[2367][2367]) mkdir_umask=$umask;; mkdir_mode=
.*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; fi
*[0-7]) posix_mkdir=false
mkdir_umask=`expr $umask + 22 \ # The $RANDOM variable is not portable (e.g., dash). Use it
- $umask % 100 % 40 + $umask % 20 \ # here however when possible just to lower collision chance.
- $umask % 10 % 4 + $umask % 2 tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
`;;
*) mkdir_umask=$umask,go-w;; trap '
esac ret=$?
rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null
# With -d, create the new directory with the user-specified mode. exit $ret
# Otherwise, rely on $mkdir_umask. ' 0
if test -n "$dir_arg"; then
mkdir_mode=-m$mode # Because "mkdir -p" follows existing symlinks and we likely work
# directly in world-writeable /tmp, make sure that the '$tmpdir'
# directory is successfully created first before we actually test
# 'mkdir -p'.
if (umask $mkdir_umask &&
$mkdirprog $mkdir_mode "$tmpdir" &&
exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
then
if test -z "$dir_arg" || {
# Check for POSIX incompatibilities with -m.
# HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
# other-writable bit of parent directory when it shouldn't.
# FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
test_tmpdir="$tmpdir/a"
ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
case $ls_ld_tmpdir in
d????-?r-*) different_mode=700;;
d????-?--*) different_mode=755;;
*) false;;
esac &&
$mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
}
}
then posix_mkdir=:
fi
rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
else else
mkdir_mode= # Remove any dirs left behind by ancient mkdir implementations.
rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
fi fi
trap '' 0;;
posix_mkdir=false
case $umask in
*[123567][0-7][0-7])
# POSIX mkdir -p sets u+wx bits regardless of umask, which
# is incompatible with FreeBSD 'install' when (umask & 300) != 0.
;;
*)
tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
if (umask $mkdir_umask &&
exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
then
if test -z "$dir_arg" || {
# Check for POSIX incompatibilities with -m.
# HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
# other-writable bit of parent directory when it shouldn't.
# FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
ls_ld_tmpdir=`ls -ld "$tmpdir"`
case $ls_ld_tmpdir in
d????-?r-*) different_mode=700;;
d????-?--*) different_mode=755;;
*) false;;
esac &&
$mkdirprog -m$different_mode -p -- "$tmpdir" && {
ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
}
}
then posix_mkdir=:
fi
rmdir "$tmpdir/d" "$tmpdir"
else
# Remove any dirs left behind by ancient mkdir implementations.
rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
fi
trap '' 0;;
esac;;
esac esac
if if
$posix_mkdir && ( $posix_mkdir && (
umask $mkdir_umask && umask $mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
) )
then : then :
else else
# The umask is ridiculous, or mkdir does not conform to POSIX, # mkdir does not conform to POSIX,
# or it failed possibly due to a race condition. Create the # or it failed possibly due to a race condition. Create the
# directory the slow way, step by step, checking for races as we go. # directory the slow way, step by step, checking for races as we go.
case $dstdir in case $dstdir in
/*) prefix='/';; /*) prefix='/';;
[-=\(\)!]*) prefix='./';; [-=\(\)!]*) prefix='./';;
*) prefix='';; *) prefix='';;
esac esac
eval "$initialize_posix_glob"
oIFS=$IFS oIFS=$IFS
IFS=/ IFS=/
$posix_glob set -f set -f
set fnord $dstdir set fnord $dstdir
shift shift
$posix_glob set +f set +f
IFS=$oIFS IFS=$oIFS
prefixes= prefixes=
for d for d
do do
test X"$d" = X && continue test X"$d" = X && continue
prefix=$prefix$d prefix=$prefix$d
if test -d "$prefix"; then if test -d "$prefix"; then
prefixes= prefixes=
else else
if $posix_mkdir; then if $posix_mkdir; then
(umask=$mkdir_umask && (umask $mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
# Don't fail if two instances are running concurrently. # Don't fail if two instances are running concurrently.
test -d "$prefix" || exit 1 test -d "$prefix" || exit 1
else else
case $prefix in case $prefix in
*\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
*) qprefix=$prefix;; *) qprefix=$prefix;;
esac esac
prefixes="$prefixes '$qprefix'" prefixes="$prefixes '$qprefix'"
fi fi
fi fi
prefix=$prefix/ prefix=$prefix/
done done
if test -n "$prefixes"; then if test -n "$prefixes"; then
# Don't fail if two instances are running concurrently. # Don't fail if two instances are running concurrently.
(umask $mkdir_umask && (umask $mkdir_umask &&
eval "\$doit_exec \$mkdirprog $prefixes") || eval "\$doit_exec \$mkdirprog $prefixes") ||
test -d "$dstdir" || exit 1 test -d "$dstdir" || exit 1
obsolete_mkdir_used=true obsolete_mkdir_used=true
fi fi
fi fi
fi fi
if test -n "$dir_arg"; then if test -n "$dir_arg"; then
{ test -z "$chowncmd" || $doit $chowncmd "$dst"; } && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
{ test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
else else
# Make a couple of temp file names in the proper directory. # Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_ dsttmp=${dstdirslash}_inst.$$_
rmtmp=$dstdir/_rm.$$_ rmtmp=${dstdirslash}_rm.$$_
# Trap to clean up those temp files at exit. # Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
# Copy the file name to the temp name. # Copy the file name to the temp name.
(umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && (umask $cp_umask &&
{ test -z "$stripcmd" || {
# Create $dsttmp read-write so that cp doesn't create it read-only,
# which would cause strip to fail.
if test -z "$doit"; then
: >"$dsttmp" # No need to fork-exec 'touch'.
else
$doit touch "$dsttmp"
fi
}
} &&
$doit_exec $cpprog "$src" "$dsttmp") &&
# and set any options; do chmod last to preserve setuid bits. # and set any options; do chmod last to preserve setuid bits.
# #
# If any of these fail, we abort the whole thing. If we want to # If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore # ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command. # errors from the above "$doit $cpprog $src $dsttmp" command.
# #
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
{ test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
{ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
# If -C, don't bother to copy if it wouldn't change the file. # If -C, don't bother to copy if it wouldn't change the file.
if $copy_on_change && if $copy_on_change &&
old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
set -f &&
eval "$initialize_posix_glob" &&
$posix_glob set -f &&
set X $old && old=:$2:$4:$5:$6 && set X $old && old=:$2:$4:$5:$6 &&
set X $new && new=:$2:$4:$5:$6 && set X $new && new=:$2:$4:$5:$6 &&
$posix_glob set +f && set +f &&
test "$old" = "$new" && test "$old" = "$new" &&
$cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
then then
rm -f "$dsttmp" rm -f "$dsttmp"
else else
# If $backupsuffix is set, and the file being installed
# already exists, attempt a backup. Don't worry if it fails,
# e.g., if mv doesn't support -f.
if test -n "$backupsuffix" && test -f "$dst"; then
$doit $mvcmd -f "$dst" "$dst$backupsuffix" 2>/dev/null
fi
# Rename the file to the real destination. # Rename the file to the real destination.
$doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
# The rename failed, perhaps because mv can't rename something else # The rename failed, perhaps because mv can't rename something else
# to itself, or perhaps because mv is so ancient that it does not # to itself, or perhaps because mv is so ancient that it does not
# support -f. # support -f.
{ {
# Now remove or move aside any old file at destination location. # Now remove or move aside any old file at destination location.
# We try this two ways since rm can't unlink itself on some # We try this two ways since rm can't unlink itself on some
# systems and the destination file might be busy for other # systems and the destination file might be busy for other
# reasons. In this case, the final cleanup might fail but the new # reasons. In this case, the final cleanup might fail but the new
# file should still install successfully. # file should still install successfully.
{ {
test ! -f "$dst" || test ! -f "$dst" ||
$doit $rmcmd -f "$dst" 2>/dev/null || $doit $rmcmd "$dst" 2>/dev/null ||
{ $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
{ $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } { $doit $rmcmd "$rmtmp" 2>/dev/null; :; }
} || } ||
{ echo "$0: cannot unlink or rename $dst" >&2 { echo "$0: cannot unlink or rename $dst" >&2
(exit 1); exit 1 (exit 1); exit 1
} }
} && } &&
# Now rename the file to the real destination. # Now rename the file to the real destination.
$doit $mvcmd "$dsttmp" "$dst" $doit $mvcmd "$dsttmp" "$dst"
} }
fi || exit 1 fi || exit 1
trap '' 0 trap '' 0
fi fi
done done
# Local variables: # Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp) # eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion=" # time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC" # time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC" # time-stamp-end: "; # UTC"
# End: # End:
 End of changes. 53 change blocks. 
202 lines changed or deleted 216 lines changed or added

Home  |  About  |  Features  |  All  |  Newest  |  Dox  |  Diffs  |  RSS Feeds  |  Screenshots  |  Comments  |  Imprint  |  Privacy  |  HTTP(S)