"Fossies" - the Fresh Open Source Software archive 
Member "httpauth-0.9.5/daemon/smbval/smblib-priv.h" of archive httpauth-0.9.5.tar.gz:
/* mod_ntlm file: $Id: smblib-priv.h,v 1.3 2003/02/21 01:55:14 casz Exp $ */
#ifndef SMBLIB_PRIV_H
#define SMBLIB_PRIV_H
/* UNIX SMBlib NetBIOS implementation
*
* Version 1.0 SMBlib private Defines
*
* Copyright (C) Richard Sharpe 1996
*
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version. This program is distributed in the hope
* that it will be useful, but WITHOUT ANY WARRANTY; without even the
* implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more details. You
* should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA. */
#include "std-defines.h"
#include "smblib-common.h"
#include <sys/types.h>
#include <unistd.h>
typedef unsigned short uint16;
typedef unsigned int uint32;
#include "byteorder.h" /* Hmmm ... hot good */
#define max(a,b) (a < b ? b : a)
#define SMB_DEF_IDF 0x424D53FF /* "\377SMB" */
/* Core protocol commands */
#define SMBmkdir 0x00 /* create directory */
#define SMBrmdir 0x01 /* delete directory */
#define SMBopen 0x02 /* open file */
#define SMBcreate 0x03 /* create file */
#define SMBclose 0x04 /* close file */
#define SMBflush 0x05 /* flush file */
#define SMBunlink 0x06 /* delete file */
#define SMBmv 0x07 /* rename file */
#define SMBgetatr 0x08 /* get file attributes */
#define SMBsetatr 0x09 /* set file attributes */
#define SMBread 0x0A /* read from file */
#define SMBwrite 0x0B /* write to file */
#define SMBlock 0x0C /* lock byte range */
#define SMBunlock 0x0D /* unlock byte range */
#define SMBctemp 0x0E /* create temporary file */
#define SMBmknew 0x0F /* make new file */
#define SMBchkpth 0x10 /* check directory path */
#define SMBexit 0x11 /* process exit */
#define SMBlseek 0x12 /* seek */
#define SMBtcon 0x70 /* tree connect */
#define SMBtdis 0x71 /* tree disconnect */
#define SMBnegprot 0x72 /* negotiate protocol */
#define SMBdskattr 0x80 /* get disk attributes */
#define SMBsearch 0x81 /* search directory */
#define SMBsplopen 0xC0 /* open print spool file */
#define SMBsplwr 0xC1 /* write to print spool file */
#define SMBsplclose 0xC2 /* close print spool file */
#define SMBsplretq 0xC3 /* return print queue */
#define SMBsends 0xD0 /* send single block message */
#define SMBsendb 0xD1 /* send broadcast message */
#define SMBfwdname 0xD2 /* forward user name */
#define SMBcancelf 0xD3 /* cancel forward */
#define SMBgetmac 0xD4 /* get machine name */
#define SMBsendstrt 0xD5 /* send start of multi-block message */
#define SMBsendend 0xD6 /* send end of multi-block message */
#define SMBsendtxt 0xD7 /* send text of multi-block message */
/* CorePlus protocol */
#define SMBlockread 0x13 /* Lock a range and read it */
#define SMBwriteunlock 0x14 /* Unlock a range and then write */
#define SMBreadbraw 0x1a /* read a block of data without smb header
* ohead */
#define SMBwritebraw 0x1d /* write a block of data without smb
* header ohead */
#define SMBwritec 0x20 /* secondary write request */
#define SMBwriteclose 0x2c /* write a file and then close it */
/* DOS Extended Protocol */
#define SMBreadBraw 0x1A /* read block raw */
#define SMBreadBmpx 0x1B /* read block multiplexed */
#define SMBreadBs 0x1C /* read block (secondary response) */
#define SMBwriteBraw 0x1D /* write block raw */
#define SMBwriteBmpx 0x1E /* write block multiplexed */
#define SMBwriteBs 0x1F /* write block (secondary request) */
#define SMBwriteC 0x20 /* write complete response */
#define SMBsetattrE 0x22 /* set file attributes expanded */
#define SMBgetattrE 0x23 /* get file attributes expanded */
#define SMBlockingX 0x24 /* lock/unlock byte ranges and X */
#define SMBtrans 0x25 /* transaction - name, bytes in/out */
#define SMBtranss 0x26 /* transaction (secondary
* request/response) */
#define SMBioctl 0x27 /* IOCTL */
#define SMBioctls 0x28 /* IOCTL (secondary request/response) */
#define SMBcopy 0x29 /* copy */
#define SMBmove 0x2A /* move */
#define SMBecho 0x2B /* echo */
#define SMBopenX 0x2D /* open and X */
#define SMBreadX 0x2E /* read and X */
#define SMBwriteX 0x2F /* write and X */
#define SMBsesssetupX 0x73 /* Session Set Up & X (including User
* Logon) */
#define SMBtconX 0x75 /* tree connect and X */
#define SMBffirst 0x82 /* find first */
#define SMBfunique 0x83 /* find unique */
#define SMBfclose 0x84 /* find close */
#define SMBinvalid 0xFE /* invalid command */
/* Any more ? */
#define SMBdatablockID 0x01 /* A data block identifier */
#define SMBdialectID 0x02 /* A dialect id */
#define SMBpathnameID 0x03 /* A pathname ID */
#define SMBasciiID 0x04 /* An ascii string ID */
#define SMBvariableblockID 0x05 /* A variable block ID */
/* some other defines we need */
/* Flags defines ... */
#define SMB_FLG2_NON_DOS 0x01 /* We know non dos names
* */
#define SMB_FLG2_EXT_ATR 0x02 /* We know about Extended
* Attributes */
#define SMB_FLG2_LNG_NAM 0x04 /* Long names ?
* */
typedef unsigned short WORD;
typedef unsigned short UWORD;
typedef unsigned int ULONG;
typedef unsigned char BYTE;
typedef unsigned char UCHAR;
/* Some macros to allow access to actual packet data so that we */
/* can change the underlying representation of packets. */
/* */
/* The current formats vying for attention are a fragment */
/* approach where the SMB header is a fragment linked to the */
/* data portion with the transport protocol (rfcnb or whatever) */
/* being linked on the front. */
/* */
/* The other approach is where the whole packet is one array */
/* of bytes with space allowed on the front for the packet */
/* headers. */
#define SMB_Hdr(p) (char *)(p -> data)
/* SMB Hdr def for File Sharing Protocol? From MS and Intel, */
/* Intel PN 138446 Doc Version 2.0, Nov 7, 1988. This def also */
/* applies to LANMAN1.0 as well as the Core Protocol */
/* The spec states that wct and bcc must be present, even if 0 */
/* We define these as offsets into a char SMB[] array for the */
/* sake of portability */
/* NOTE!. Some of the lenght defines, SMB_<protreq>_len do not include */
/* the data that follows in the SMB packet, so the code will have to */
/* take that into account. */
#define SMB_hdr_idf_offset 0 /* 0xFF,'SMB' 0-3 */
#define SMB_hdr_com_offset 4 /* BYTE 4 */
#define SMB_hdr_rcls_offset 5 /* BYTE 5 */
#define SMB_hdr_reh_offset 6 /* BYTE 6 */
#define SMB_hdr_err_offset 7 /* WORD 7 */
#define SMB_hdr_reb_offset 9 /* BYTE 9 */
#define SMB_hdr_flg_offset 9 /* same as reb ... */
#define SMB_hdr_res_offset 10 /* 7 WORDs 10 */
#define SMB_hdr_res0_offset 10 /* WORD 10 */
#define SMB_hdr_flg2_offset 10 /* WORD */
#define SMB_hdr_res1_offset 12 /* WORD 12 */
#define SMB_hdr_res2_offset 14
#define SMB_hdr_res3_offset 16
#define SMB_hdr_res4_offset 18
#define SMB_hdr_res5_offset 20
#define SMB_hdr_res6_offset 22
#define SMB_hdr_tid_offset 24
#define SMB_hdr_pid_offset 26
#define SMB_hdr_uid_offset 28
#define SMB_hdr_mid_offset 30
#define SMB_hdr_wct_offset 32
#define SMB_hdr_len 33 /* 33 byte header? */
#define SMB_hdr_axc_offset 33 /* AndX Command */
#define SMB_hdr_axr_offset 34 /* AndX Reserved */
#define SMB_hdr_axo_offset 35 /* Offset from start to WCT of
* AndX cmd */
/* Format of the Negotiate Protocol SMB */
#define SMB_negp_bcc_offset 33
#define SMB_negp_buf_offset 35 /* Where the buffer starts */
#define SMB_negp_len 35 /* plus the data */
/* Format of the Negotiate Response SMB, for CoreProtocol, LM1.2 and */
/* NT LM 0.12. wct will be 1 for CoreProtocol, 13 for LM 1.2, and 17 */
/* for NT LM 0.12 */
#define SMB_negrCP_idx_offset 33 /* Response to the neg req */
#define SMB_negrCP_bcc_offset 35
#define SMB_negrLM_idx_offset 33 /* dialect index */
#define SMB_negrLM_sec_offset 35 /* Security mode */
#define SMB_sec_user_mask 0x01 /* 0 = share, 1 = user */
#define SMB_sec_encrypt_mask 0x02 /* pick out encrypt */
#define SMB_negrLM_mbs_offset 37 /* max buffer size */
#define SMB_negrLM_mmc_offset 39 /* max mpx count */
#define SMB_negrLM_mnv_offset 41 /* max number of VCs */
#define SMB_negrLM_rm_offset 43 /* raw mode support bit vec */
#define SMB_read_raw_mask 0x01
#define SMB_write_raw_mask 0x02
#define SMB_negrLM_sk_offset 45 /* session key, 32 bits */
#define SMB_negrLM_st_offset 49 /* Current server time */
#define SMB_negrLM_sd_offset 51 /* Current server date */
#define SMB_negrLM_stz_offset 53 /* Server Time Zone */
#define SMB_negrLM_ekl_offset 55 /* encryption key length */
#define SMB_negrLM_res_offset 57 /* reserved */
#define SMB_negrLM_bcc_offset 59 /* bcc */
#define SMB_negrLM_len 61 /* 61 bytes ? */
#define SMB_negrLM_buf_offset 61 /* Where the fun begins */
#define SMB_negrNTLM_idx_offset 33 /* Selected protocol */
#define SMB_negrNTLM_sec_offset 35 /* Security more */
#define SMB_negrNTLM_mmc_offset 36 /* Different format above */
#define SMB_negrNTLM_mnv_offset 38 /* Max VCs */
#define SMB_negrNTLM_mbs_offset 40 /* MBS now a long */
#define SMB_negrNTLM_mrs_offset 44 /* Max raw size */
#define SMB_negrNTLM_sk_offset 48 /* Session Key */
#define SMB_negrNTLM_cap_offset 52 /* Capabilities */
#define SMB_negrNTLM_stl_offset 56 /* Server time low */
#define SMB_negrNTLM_sth_offset 60 /* Server time high */
#define SMB_negrNTLM_stz_offset 64 /* Server time zone */
#define SMB_negrNTLM_ekl_offset 66 /* Encrypt key len */
#define SMB_negrNTLM_bcc_offset 67 /* Bcc */
#define SMB_negrNTLM_len 69
#define SMB_negrNTLM_buf_offset 69
/* Offsets related to Tree Connect */
#define SMB_tcon_bcc_offset 33
#define SMB_tcon_buf_offset 35 /* where the data is for tcon */
#define SMB_tcon_len 35 /* plus the data */
#define SMB_tconr_mbs_offset 33 /* max buffer size */
#define SMB_tconr_tid_offset 35 /* returned tree id */
#define SMB_tconr_bcc_offset 37
#define SMB_tconr_len 39
#define SMB_tconx_axc_offset 33 /* And X Command */
#define SMB_tconx_axr_offset 34 /* reserved */
#define SMB_tconx_axo_offset 35 /* Next command offset */
#define SMB_tconx_flg_offset 37 /* Flags, bit0=1 means disc TID */
#define SMB_tconx_pwl_offset 39 /* Password length */
#define SMB_tconx_bcc_offset 41 /* bcc */
#define SMB_tconx_buf_offset 43 /* buffer */
#define SMB_tconx_len 43 /* up to data ... */
#define SMB_tconxr_axc_offset 33 /* Where the AndX Command is */
#define SMB_tconxr_axr_offset 34 /* Reserved */
#define SMB_tconxr_axo_offset 35 /* AndX offset location */
/* Offsets related to tree_disconnect */
#define SMB_tdis_bcc_offset 33 /* bcc */
#define SMB_tdis_len 35 /* total len */
#define SMB_tdisr_bcc_offset 33 /* bcc */
#define SMB_tdisr_len 35
/* Offsets related to Open Request */
#define SMB_open_mod_offset 33 /* Mode to open with */
#define SMB_open_atr_offset 35 /* Attributes of file */
#define SMB_open_bcc_offset 37 /* bcc */
#define SMB_open_buf_offset 39 /* File name */
#define SMB_open_len 39 /* Plus the file name */
#define SMB_openx_axc_offset 33 /* Next command */
#define SMB_openx_axr_offset 34 /* Reserved */
#define SMB_openx_axo_offset 35 /* offset of next wct */
#define SMB_openx_flg_offset 37 /* Flags, bit0 = need more info */
/* bit1 = exclusive oplock */
/* bit2 = batch oplock */
#define SMB_openx_mod_offset 39 /* mode to open with */
#define SMB_openx_atr_offset 41 /* search attributes */
#define SMB_openx_fat_offset 43 /* File attributes */
#define SMB_openx_tim_offset 45 /* time and date of creat */
#define SMB_openx_ofn_offset 49 /* Open function */
#define SMB_openx_als_offset 51 /* Space to allocate on */
#define SMB_openx_res_offset 55 /* reserved */
#define SMB_openx_bcc_offset 63 /* bcc */
#define SMB_openx_buf_offset 65 /* Where file name goes */
#define SMB_openx_len 65
#define SMB_openr_fid_offset 33 /* FID returned */
#define SMB_openr_atr_offset 35 /* Attributes opened with */
#define SMB_openr_tim_offset 37 /* Last mod time of file */
#define SMB_openr_fsz_offset 41 /* File size 4 bytes */
#define SMB_openr_acc_offset 45 /* Access allowed */
#define SMB_openr_bcc_offset 47
#define SMB_openr_len 49
#define SMB_openxr_axc_offset 33 /* And X command */
#define SMB_openxr_axr_offset 34 /* reserved */
#define SMB_openxr_axo_offset 35 /* offset to next command */
#define SMB_openxr_fid_offset 37 /* FID returned */
#define SMB_openxr_fat_offset 39 /* File attributes returned */
#define SMB_openxr_tim_offset 41 /* File creation date etc */
#define SMB_openxr_fsz_offset 45 /* Size of file */
#define SMB_openxr_acc_offset 49 /* Access granted */
#define SMB_clos_fid_offset 33 /* FID to close */
#define SMB_clos_tim_offset 35 /* Last mod time */
#define SMB_clos_bcc_offset 39 /* bcc */
#define SMB_clos_len 41
/* Offsets related to Write requests */
#define SMB_write_fid_offset 33 /* FID to write */
#define SMB_write_cnt_offset 35 /* bytes to write */
#define SMB_write_ofs_offset 37 /* location to write to */
#define SMB_write_clf_offset 41 /* advisory count left */
#define SMB_write_bcc_offset 43 /* bcc = data bytes + 3 */
#define SMB_write_buf_offset 45 /* Data=0x01, len, data */
#define SMB_write_len 45 /* plus the data ... */
#define SMB_writr_cnt_offset 33 /* Count of bytes written */
#define SMB_writr_bcc_offset 35 /* bcc */
#define SMB_writr_len 37
/* Offsets related to read requests */
#define SMB_read_fid_offset 33 /* FID of file to read */
#define SMB_read_cnt_offset 35 /* count of words to read */
#define SMB_read_ofs_offset 37 /* Where to read from */
#define SMB_read_clf_offset 41 /* Advisory count to go */
#define SMB_read_bcc_offset 43
#define SMB_read_len 45
#define SMB_readr_cnt_offset 33 /* Count of bytes returned */
#define SMB_readr_res_offset 35 /* 4 shorts reserved, 8 bytes */
#define SMB_readr_bcc_offset 43 /* bcc */
#define SMB_readr_bff_offset 45 /* buffer format char = 0x01 */
#define SMB_readr_len_offset 46 /* buffer len */
#define SMB_readr_len 45 /* length of the readr before data
*/
/* Offsets for Create file */
#define SMB_creat_atr_offset 33 /* Attributes of new file ... */
#define SMB_creat_tim_offset 35 /* Time of creation */
#define SMB_creat_dat_offset 37 /* 4004BCE :-) */
#define SMB_creat_bcc_offset 39 /* bcc */
#define SMB_creat_buf_offset 41
#define SMB_creat_len 41 /* Before the data */
#define SMB_creatr_fid_offset 33 /* FID of created file */
/* Offsets for Delete file */
#define SMB_delet_sat_offset 33 /* search attribites */
#define SMB_delet_bcc_offset 35 /* bcc */
#define SMB_delet_buf_offset 37
#define SMB_delet_len 37
/* Offsets for SESSION_SETUP_ANDX for both LM and NT LM protocols */
#define SMB_ssetpLM_mbs_offset 37 /* Max buffer Size, allow for AndX
*/
#define SMB_ssetpLM_mmc_offset 39 /* max multiplex count
* */
#define SMB_ssetpLM_vcn_offset 41 /* VC number if new VC
* */
#define SMB_ssetpLM_snk_offset 43 /* Session Key
* */
#define SMB_ssetpLM_pwl_offset 47 /* password length
* */
#define SMB_ssetpLM_res_offset 49 /* reserved
* */
#define SMB_ssetpLM_bcc_offset 53 /* bcc
* */
#define SMB_ssetpLM_len 55 /* before data ...
* */
#define SMB_ssetpLM_buf_offset 55
#define SMB_ssetpNTLM_mbs_offset 37 /* Max Buffer Size for NT LM 0.12
* */
/* and above
* */
#define SMB_ssetpNTLM_mmc_offset 39 /* Max Multiplex count
* */
#define SMB_ssetpNTLM_vcn_offset 41 /* VC Number
* */
#define SMB_ssetpNTLM_snk_offset 43 /* Session key
* */
#define SMB_ssetpNTLM_cipl_offset 47 /* Case Insensitive PW Len
* */
#define SMB_ssetpNTLM_cspl_offset 49 /* Unicode pw len
* */
#define SMB_ssetpNTLM_res_offset 51 /* reserved
* */
#define SMB_ssetpNTLM_cap_offset 55 /* server capabilities
* */
#define SMB_ssetpNTLM_bcc_offset 59 /* bcc
* */
#define SMB_ssetpNTLM_len 61 /* before data
* */
#define SMB_ssetpNTLM_buf_offset 61
#define SMB_ssetpr_axo_offset 35 /* Offset of next response ... */
#define SMB_ssetpr_act_offset 37 /* action, bit 0 = 1 => guest */
#define SMB_ssetpr_bcc_offset 39 /* bcc */
#define SMB_ssetpr_buf_offset 41 /* Native OS etc */
/* Offsets for SMB create directory
* */
#define SMB_creatdir_bcc_offset 33 /* only a bcc here */
#define SMB_creatdir_buf_offset 35 /* Where things start */
#define SMB_creatdir_len 35
/* Offsets for SMB delete directory
* */
#define SMB_deletdir_bcc_offset 33 /* only a bcc here */
#define SMB_deletdir_buf_offset 35 /* where things start */
#define SMB_deletdir_len 35
/* Offsets for SMB check directory
* */
#define SMB_checkdir_bcc_offset 33 /* Only a bcc here */
#define SMB_checkdir_buf_offset 35 /* where things start */
#define SMB_checkdir_len 35
/* Offsets for SMB search
* */
#define SMB_search_mdc_offset 33 /* Max Dir ents to return */
#define SMB_search_atr_offset 35 /* Search attributes */
#define SMB_search_bcc_offset 37 /* bcc */
#define SMB_search_buf_offset 39 /* where the action is */
#define SMB_search_len 39
#define SMB_searchr_dec_offset 33 /* Dir ents returned */
#define SMB_searchr_bcc_offset 35 /* bcc */
#define SMB_searchr_buf_offset 37 /* Where the action starts */
#define SMB_searchr_len 37 /* before the dir ents */
#define SMB_searchr_dirent_len 43 /* 53 bytes */
/* Defines for SMB transact and transact2 calls
* */
#define SMB_trans_tpc_offset 33 /* Total param count */
#define SMB_trans_tdc_offset 35 /* total Data count */
#define SMB_trans_mpc_offset 37 /* Max params bytes to return */
#define SMB_trans_mdc_offset 39 /* Max data bytes to return */
#define SMB_trans_msc_offset 41 /* Max setup words to return */
#define SMB_trans_rs1_offset 42 /* Reserved byte */
#define SMB_trans_flg_offset 43 /* flags */
#define SMB_trans_tmo_offset 45 /* Timeout, long */
#define SMB_trans_rs2_offset 49 /* Next reserved */
#define SMB_trans_pbc_offset 51 /* Param Byte count in buf */
#define SMB_trans_pbo_offset 53 /* Offset to param bytes */
#define SMB_trans_dbc_offset 55 /* Data byte count in buf */
#define SMB_trans_dbo_offset 57 /* Data byte offset */
#define SMB_trans_suc_offset 59 /* Setup count - byte */
#define SMB_trans_rs3_offset 60 /* Reserved to pad ... */
#define SMB_trans_len 61 /* Up to setup, still need bcc */
#define SMB_transr_tpc_offset 33 /* Total param bytes returned */
#define SMB_transr_tdc_offset 35
#define SMB_transr_rs1_offset 37
#define SMB_transr_pbc_offset 39
#define SMB_transr_pbo_offset 41
#define SMB_transr_pdi_offset 43 /* parameter displacement */
#define SMB_transr_dbc_offset 45
#define SMB_transr_dbo_offset 47
#define SMB_transr_ddi_offset 49
#define SMB_transr_suc_offset 51
#define SMB_transr_rs2_offset 52
#define SMB_transr_len 53
/* Bit masks for SMB Capabilities ... */
#define SMB_cap_raw_mode 0x0001
#define SMB_cap_mpx_mode 0x0002
#define SMB_cap_unicode 0x0004
#define SMB_cap_large_files 0x0008
#define SMB_cap_nt_smbs 0x0010
#define SMB_rpc_remote_apis 0x0020
#define SMB_cap_nt_status 0x0040
#define SMB_cap_level_II_oplocks 0x0080
#define SMB_cap_lock_and_read 0x0100
#define SMB_cap_nt_find 0x0200
/* SMB LANMAN api call defines */
#define SMB_LMapi_SetUserInfo 0x0072
#define SMB_LMapi_UserPasswordSet 0x0073
/* Structures and defines we use in the client interface */
/* The protocols we might support. Perhaps a bit ambitious, as only RFCNB */
/* has any support so far 0(sometimes called NBT) */
typedef enum {
SMB_RFCNB, SMB_IPXNB, SMB_NETBEUI, SMB_X25
} SMB_Transport_Types;
typedef enum {
SMB_Con_FShare, SMB_Con_PShare, SMB_Con_IPC
} SMB_Con_Types;
typedef enum {
SMB_State_NoState, SMB_State_Stopped, SMB_State_Started
} SMB_State_Types;
/* The following two arrays need to be in step! */
/* We must make it possible for callers to specify these ... */
static char *SMB_Prots[] =
{"PC NETWORK PROGRAM 1.0",
"MICROSOFT NETWORKS 1.03",
"MICROSOFT NETWORKS 3.0",
"DOS LANMAN1.0",
"LANMAN1.0",
"DOS LM1.2X002",
"LM1.2X002",
"DOS LANMAN2.1",
"LANMAN2.1",
"Samba",
"NT LM 0.12",
"NT LANMAN 1.0",
NULL};
static int SMB_Types[] =
{SMB_P_Core,
SMB_P_CorePlus,
SMB_P_DOSLanMan1,
SMB_P_DOSLanMan1,
SMB_P_LanMan1,
SMB_P_DOSLanMan2,
SMB_P_LanMan2,
SMB_P_LanMan2_1,
SMB_P_LanMan2_1,
SMB_P_NT1,
SMB_P_NT1,
SMB_P_NT1,
-1};
typedef struct SMB_Status {
union {
struct {
unsigned char ErrorClass;
unsigned char Reserved;
unsigned short Error;
} DosError;
unsigned int NtStatus;
} status;
} SMB_Status;
typedef struct SMB_Tree_Structure *SMB_Tree_Handle;
typedef struct SMB_Connect_Def *SMB_Handle_Type;
struct SMB_Connect_Def {
SMB_Handle_Type Next_Con, Prev_Con; /* Next and previous conn */
int protocol; /* What is the protocol */
int prot_IDX; /* And what is the index */
void *Trans_Connect; /* The connection */
/* All these strings should be malloc'd */
char service[80], username[80], password[80], desthost[80], sock_options[80];
char address[80], myname[80];
SMB_Tree_Handle first_tree, last_tree; /* List of trees on this
* server */
int gid; /* Group ID, do we need it?
* */
int mid; /* Multiplex ID? We might need one per con
*/
int pid; /* Process ID
* */
int uid; /* Authenticated user id.
* */
/* It is pretty clear that we need to bust some of */
/* these out into a per TCon record, as there may */
/* be multiple TCon's per server, etc ... later */
int port; /* port to use in case not default, this
* is a TCPism! */
int max_xmit; /* Max xmit permitted by server
* */
int Security; /* 0 = share, 1 = user
* */
int Raw_Support; /* bit 0 = 1 = Read Raw supported, 1 = 1
* Write raw */
BOOL encrypt_passwords; /* FALSE = don't */
int MaxMPX, MaxVC, MaxRaw;
unsigned int SessionKey, Capabilities;
int SvrTZ; /* Server Time Zone */
int Encrypt_Key_Len;
char Encrypt_Key[80], Domain[80], PDomain[80], OSName[80], LMType[40];
char Svr_OS[80], Svr_LMType[80], Svr_PDom[80];
};
#define SMBLIB_DEFAULT_DOMAIN "STAFF"
#define SMBLIB_DEFAULT_OSNAME "UNIX of some type"
#define SMBLIB_DEFAULT_LMTYPE "SMBlib LM2.1 minus a bit"
#define SMBLIB_MAX_XMIT 65535
#define SMB_Sec_Mode_Share 0
#define SMB_Sec_Mode_User 1
/* A Tree_Structure */
struct SMB_Tree_Structure {
SMB_Tree_Handle next, prev;
SMB_Handle_Type con;
char path[129];
char device_type[20];
int mbs; /* Local MBS */
int tid;
};
typedef struct SMB_File_Def SMB_File;
struct SMB_File_Def {
SMB_Tree_Handle tree;
char filename[256]; /* We should malloc this ... */
UWORD fid;
unsigned int lastmod;
unsigned int size; /* Could blow up if 64bit files supported */
UWORD access;
off_t fileloc;
};
/* global Variables for the library */
extern SMB_State_Types SMBlib_State;
#ifndef SMBLIB_ERRNO
extern int SMBlib_errno;
extern int SMBlib_SMB_Error; /* last Error */
#endif
#endif